Work at home 4 - part 1

Everything seems to work (well, I get no own GPS data, except once in a while, a speed record looks OK). But there are a few inconsistencies, I wanted to check.

(1) in the video it shows reviews of the ReaderImlet as separated by the caret, so that there are 43 "Records" showed. My ReaderImlet show them in the same way, they look when sent on the socket for the VisualClient: 1-10 Records, each with 4 caret delimited fields, each field consisting of several subdomains separated by commas. I guess that the download is just a different version of the ReaderImlet? Or is the fact that my GPS info is basically useless which is at the origin of the data will not be saved in RMS?

(2) the DISCONNECTION is not received correctly by ServerImlet when the data has been transferred. If I do a follow-up a disconnect Connect, reports IP console receives an order of DISCONNECTION. But if "Read data" has been requested by the VisualClient (which shows the data received), then the button disconnect seems to work on the side VisualClient (only the connection button becomes available, the other two disabled), but no reports of the €™ IP any DISCONNECTION has been received. I did carefully with the debugger on VisualClient - the moment where a flush() function is performed on the socket, the Pi will report receipt of LOGOUT command only if no data has been requested. This behavior seems to me is independent of the question whether my system has "good data", but there may be a record "purpose" missing that the ServerImlet is to send, that my difficulties of GPS has not been generated, and which puts the ServerImlet in the appropriate State to receive the next order?

I'm noting that the GPS sensor seems to be a general problem: that's inside, so is life. When I cat/dev/ttyAMA0, records plenty of all types and all look syntactically well-formed but a lot of empty strings and zeros (except that GPGGA has indeed a field more is documented - even if it is not used beyond field 8, so it's okay. I simply noted that other types of messages to use the star as a separator for the checksum, and so there is actually a field more in the file, as in the other record types may end up being "..., N * 65. Also note that the test drive program never seems to work; It always dies in a second or two, even when the GPS sensor flashes once every 15 seconds - drive test program suddenly makes the flash sensor quickly.) With the splitCSVString(), note that it is in fact the last field, because once that the start at variable points to the character after the last comma, the location of a comma passed that does not really exist if any remaining text after the last comma is ignored. For my part, I added after the loop a field.add () with all that after the final comma (which may be empty) and then still cut the last field in another one if the field has a star: the last field in the ArrayList is always the sum of control. With this strategy, only GPGGA is an additional field out of its documented form.

Hi wizardbj,

Thanks for this posting. I have read that this now and you've done some discovered extremely important.

For 1, sometimes I get 10, 20 or even up to 60 files, depending on how well the data comes in I guess.

For 2, it's your greatest contribution. You have found a critical bug in the server. To resolve this problem, in the while loop (true) of the DataConnection class and the title of the fi (command.compareTo(READ_DATA == 0)) direction, comment the break and replace it with a statement continues. This is essential because when data are read, the loop ends, so it could never process the incoming 'DISCONNECT' command and so you never saw the usual message of disconnection to the screen printing...

Finally, you all should close the connection properly to clean up resources. I don't see that it correctly in server code.

Thanks wiz! Well spotted.

Tags: Java

Similar Questions

How can you change a password on Vista for a group of net work at home

How can you access the area to change the password for a group of net work at home? I'm unable to find had worked well but formatted Vista computer to make it faster. Now unable to find the box to change the password. Another computer on a network running 7.

Hello

What password are you talking?

If it's regarding network sharing again the sharing.

Maybe this can help.

To get best results connect to each computer system screen and set all the computers to be on a bearing the same name of Working Group , while each computer has its own unique name.

http://www.ezlan.NET/Win7/net_name.jpg

Make sure that the software firewall, AV, or other security components allow free local traffic on all network computers. If you use the 3rd group of security, firewall native Vista/XP must be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

General example, http://www.ezlan.net/faq.html#trusted
Please Note that some 3rd party software firewall/AV/security costumes continue to block aspects of the Local traffic even it they are off (off). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic.

If you end up with the 3rd party software uninstalled or disabled, make sure that Windows native firewall is active .

Network Win 7 with another version of Windows as a work network (works very well if all computers are Win 7 also).

In the center of the network, by clicking on the type of network opens the window to the right.

Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

http://www.ezlan.NET/Win7/net_type.jpg

Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

-------------

If you have permission and security issues with Vista/Win7, check the following settings.

Point to a folder that wants to share do right click and choose Properties.

In the properties

Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

This screen shot is to Win 7, Vista menus are similar.

http://www.ezlan.NET/Win7/permission-security.jpg

The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

When everything is OK, restart the network (router and computer).

* Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

** Note . All the users who are allowed to share need to have an account onall computers that they are allowed to connect to.

Everyone is an account, that means a group of all users who already have an account now as users. It is available to avoid the need to configure permission for each on its own, it does not mean all those who feel that they would like to connect.

What is main groups of work and home-group?

Dear moderator,

What is main groups of work and home-group?

Best@regards
Faruksao
From Bangladesh

Homegroup, you need windows 7 or a later version to use.

Group work is part of a network, if your PC is part of a

How to contact you HR for work at home positions

Good evening I have sent in applications for the work at home advisors and have not heard anything in the back of the yet its been going on 2 months from next week and I wasn't just concern that they have not received my resume can help the United States some im...

You'll hear from them IF you made the cut for recruiter FaceTime/Skype interview.

There is no contact for HR (it's understandable - there are probably 100's of applications received)

It would be courteous Apple HR to send an email indicating that you have been denied (this could be as simple as punching a twang to send a form letter when the recruiter looks at your request - it would take literally 2 seconds)

When you work from home I use a computer pc laptop co problem. -What adapters I need connect to Thunderbolt, or is that not possible?

Not able to use my MBP when you work at home so I'm stuck with a co issue HP laptop - d - sub only for external monitor connection.

Is there an adapter to allow me to connect to Thunderbolt display?

I use a Samsung now works with my MBP (because it has a HDMI) and my laptop question k..

Thank you pte

If the computer is not a Thunderbolt port, you cannot use a Thunderbolt display. There are no adapters, converters or cables that will help.

home page together will not remain as home page "work at home Australia" has supported

I tried to put my homepage "bigpond.com", but in addition to be OK for this session, the setting reverts back "work at home Australia" my setting is only good for this particular session.

Please try to follow https://support.mozilla.org/en-US/kb/Preferences%20are%20not%20saved

My PC won't start Windows after I used it to work from home

New software has been installed on my HP Pavilion G6 to allow me to work at home home. Now I stopped the work and my PC cannot start when starting. She's just a black screen and I can't get to Windows. How can I go back to Windows? How do I get this software and Boot up to the Windows STARTUP?

Hey RobVanEna,

You can try to perform a Microsoft System Restore. A Microsoft System Restore will only put you back to an earlier date and it won't affect your files (except files/files saved directly on the desktop). Please note that this is different from a recovery. A recovery will be programmed the laptop back to factory conditions, and you will lose all data on the hard drive that is not backed up externally.

Check out these instructions on how to perform a system restore. There is a lot of information at the top that you'll want to read later. In the blue link at the top of the document list, click "using System Restore when Windows 7 will not start normally.

If the system restore fails for some reason any, let me know. It is advisable to try a few different dates so does not work.

Please let me know if you have any questions or if this suggestion helped (May) help others with a similar problem. I'll keep an eye out for your answer.

Satellite L40-15B - WiFi works at home but not at school

My daughter has satellite worked at home and at school: wifi OK, internet OK. The satellite crashed: hard disk failure. Bought a new hard drive.

I reset the Satellite via the recovery CD. It is now a new clean system with * Windows Vista home premium *. * Wifi works immediately at home. Internet too, but at school with my daughter, the wifi is NOT working anymore.*
Laptops from other children at school always work with wifi.

A college of my work told me his sister had exactly the same problem!

Help!

Hello

If the WIFI connection works at home but not at school it has nothing to do with Toshiba. I think that your daughter should ask the administrator of the school what is the problem. Maybe the WLAN requires a certain configuration of TCP/IP or else I n t he know and I think that no one here can answer this question.

Is that wireless network card is properly installed and works, because you can access the Internet at home.

Sorry, but everything that s what I can say.

X 61: wireless adapter stopped working at home, work at the office...

It's the strangest thing. Last night my (Intel Pro Wireless 3945ABG) wireless adapter stopped working at home - I can view all the networks and try to connect but it won't just end connections to one of the networks I could use in the past (my own password protected network or those open).

Curiously, he does not work in my office, connect to our society, protected wireless network password.

I tried to uninstall the drivers as well as access to the connections and install the latest drivers - but in vain.

Help, please!

Moderator Note: type added to the subject line.

I don't know if it was AC 5.2 or not (because I just realized that the networks in question were not accessible on my iPhone either) - so I reset my router again and now everything is good.

Thank you!

How we prevent 11 years passed from other bridges while working at home

My 11 year old going to other sites during the time to work from home?

You can block Web sites

Connect to your account

Tools > Internet Options > Privacy tab

Move the slider, and then click the Sites button

Enter the address of the website (url) in the "Address of Web site" box

Click on the block

Click Ok

Click on apply, Ok

The website should now be inaccessible

Good luck!

I try to open a work at home and the program asks us when starting:

I try to open a work at home and the program asks us when starting: "you are not an administrator on this computer. Please add your id to the local administrator group on this computer. "How to do this while my account is already an admin?

I try to open a work at home and the program asks us when starting: "you are not an administrator on this computer. Please add your id to the local administrator group on this computer. "How to do this while my account is already an admin?

Instead - right-click on anything whatsoever that you try to open and choose 'Run as administrator'. Best?

with the apps to work at home

We have just started using CC to work and sometimes I work from home. Can I access my account and use apps at home?

You can have the creative cloud installed and signed in on two computers as long as you don't use it on one at a time. Download and install as you did on the first computer, sign in to your Adobe account on the Adobe using your Adobe ID website, download the desktop app from clouds, then download the software.

You can download the installer for Creative Cloud from here:
Creative cloud help | Creative cloud desktop.

After you install the creative Cloud desktop application, you will need to sign in with a login password and Adobe. Then you can install applications. This link provides more information and step by step instructions, if you need: CC help | Download, install, update or uninstall applications

If you get a new computer, simply log out of creative cloud over one of the other and log on to the new. Connect, disconnect you and | Adobe Creative Cloud desktop app

Guinot

Hello all, can anyone answer it please my request: I'm looking to subscribe to creative cloud, but also pc work at home and in a studio where I rent space. I have therefore 2 pc. When I subscribe, can I download/install on 2 PCs, or just one? THA

Hello all, can anyone answer it please my request: I'm looking to subscribe to creative cloud, but also pc work at home and in a studio where I rent space. I have therefore 2 pc. When I subscribe, can I download/install on 2 PCs, or just one? Thanks for any advice you can give. Best wishes, Dominic

a single-user license is for one person and not be shared between 2 people. In addition, this user cannot use a computer at a given time.

I am able to install a membership on two computers? (My work and home computers) or I have to buy twice?

I am able to install a membership on two computers? (My work and home computers) or I have to buy twice?

Hello Rafal,

You are allowed to install membership creative cloud on two computers, you do not have to buy it again.

Please visit: https://helpx.adobe.com/creative-cloud/faq.html

Concerning

Bianka Attre

I have problem with Muse files when you work at home with my laptop and when I open the files again in my work with my IMac.

I have problem with Muse files when you work at home with my laptop and when I open the files again in my work with my IMac.
I do: when I am uncomfortable with the laptop I save the files on the laptop, then on my external hard drive. Then, when I'm at work, I opened the drive, but the Muse says every time, that so many links in the 'active' is missing. And it takes a lot of time to get all the missing link. Like today I had to open a file of Muse from the external hard drive, and there are about 100 links that are missing.
How can I solve this problem

the best thing if you are a user of creative cloud is to store the files in a folder in your account of cloud instead of transferring the files from one computer to another.

If you are not a Subscriber cc then Dropbox or iCloud will work as well.

Work at home 4 - part 1

Similar Questions

Maybe you are looking for