PERC 6 controller

Similar Questions

• Additional disk on Dell R710 with PERC 6i controller

  I want to add an additional drive to an existing 5 RAID.  Can I do this without destroying the data?  If so, what is the procedure.

  Thank you

  You must CLEAR the foreign configuration on the first disc (storage, PERC, Information/Configuration, foreign/Clear in list dropdown controller). After compensation, it will show as a LOAN.

• Unable to update firmware for the PERC 5 controller / i on PE1950

  We have 6 PE1950 server with SAS PERC 5 / i integrated RAID controllers. Dell OpenManage complains about being obsolete PERC firmware. 2 servers I currently have running, firmware 5.2.1 - 0062 and 5.1.1 - 0040. I downloaded the latest version of 5.2.2 - 0072. I tried the update by the Windows package and who did not, and he complain about the OS being too recent. A server is Windows Server 2008 R2 and the other Windows Server R2 2012. So, I created a BACK USB key with Dell hard drive files and run update.bat. Who failed on both servers with the following errors:

  Firmware doesn't have flash. Stop!

  Failed to update Firmware for controller 0

  The process of updating of the firmware of the controller does not have!

  Both servers had the exact same mistakes as described above. Ideas on how I can get the firmware update successfully? I checked the package I downloaded is for the PERC 5 / I integrated.

  It's here (if that will allow me to post a link):

  www.dell.com/.../DriversDetails

  Hello

  Try this updated version and see if it works. He said that it was for the 1950s.

• How Flash perc 6i controller integrated in dellR710?

  Hi all

  I'm wrong, net flashed on board controller perc 6i server Dell R710.

  I want to Flash the firmware on it again. I checked the dell website, but there is only the procedure on "how to upgrade". I totally want to flash back, the 4 MB file on the map, where I can get it?

  Hi Renon,

  According to what is the current state, here are the links to the FW updates. If the FW is completely annihilated, and the map is no longer functional, there is a good chance that you can not solve this problem.

  (1) you can try flashing the FW within your operating system by running the file update directly

  Integrated firmware PERC6I 6.3.3 - 0002, A00, published on 17/05/2013, recommended, Urgent if yours is less 6.1.1
  Windows: http://downloads.dell.com/FOLDER01002138M/1/SAS-RAID_Firmware_F96NR_WN32_6.3.3-0002_X00.EXE

  Red Hat: http://downloads.dell.com/FOLDER01002136M/1/SAS-RAID_Firmware_F96NR_LN_6.3.3-0002_X00.BIN

  GnuPG: http://downloads.dell.com/FOLDER01002137M/1/SAS-RAID_Firmware_F96NR_LN_6.3.3-0002_X00.BIN.sign

  (2) use the idrac web interface and run remote file update (version .exe for windows) from the update tab.

  (3) use any bootable media to start the command prompt and run the version that is not packaged.

  Non-packaged/Hard Drive: http://downloads.dell.com/FOLDER01000364M/8/SAS_RAID_PERC6i-int_6.3.3-0002_A00_ZPE.exeextract the non-package files out and run update.bat using provided from the following bootable media.

  A common way to do this is to use the following tool to create a USB Bootable flash to in order to get the command prompt.

  See > how to create a Bootable USB Flash using Dell Diagnostics Deployment Package (DDDP) drive
  http://www.Dell.com/support/article/us/en/19/SLN143196/en

  Use the switch 'forcetype' with the update command.
  Ex: update.bat - forcetype

  Please let us know if this helps

• E PowerEdge T300 PERC 6I controller

  Salve,

  all'accensione del Server (service tag ADMIN NOTE: maintain the label removed by privacy policy >) ricevo message failure e di UN ho noticed che he controller SAS PERC 6I integrated non viene visto dal sistema, quindi non vede even i controller 2 brain collegati al.

  M'immagino sia da auswechseln... part quale devo would number? E' sufficiente hope he controller o devo take intervento di UN tecnico Dell?

  Grazie

  Buongiorno,

  by procedere alla riparazione del server can farvi due tipi di preventivo:

  1 Sostituzione della parte con UN tecnico onsite

  2 per e restituzione della sola parte guasta.

  A quale option e interested?

  Nel caso could inviarmi in privato it contact by l'eventuale e intervento the address.

  Grazie

  Marco

• The PERC S300 controller replacement

  I want to upgrade a server PowerEdge R310 Windows Server 2008 R2 to R2 2012. Unfortunately the PERC S300 is not supported and I could not find the necessary drivers.

  I found that PERC H700 has the correct drivers and is compatible with the R310, can anyone confirm that please?

  Are there cheaper alternatives? Otherwise, I think I have to disconnect the PERC controller and connect the drives to the internal SATA ports, but then I have 4 independent drives with no RAID either because the PERC S100 embedded is not as well supported... (is there a SW raid solution?)

  Thank you

  The H700 is a controller that is supported on the R310, but you must do a clean install or backup/restore.

  The H310 is also supported by the R310.  It is a hardware RAID controller low end and would also require a reinstall/restore.

  The S100 can handle a direct migration of the S300 disc, but when you read, it is not supported in 2012 either.

  You can move the disks to the SATA onboard and get rid of the S300, but there was also a clean installation/restore.  If you did the onboard SATA (in AHCI/no RAID), there was no RAID managed by the system, but you can configure RAID under Windows, which would provide at least some redundancy.  Performance is not worse than the S series controllers.

  My advice?  Never skimp on storage, no matter what it is used for.  Always get the top of the page (H7x0) controller when you configure a server.

• PowerEdge 860 - PERC RAID controller compatibility

  I would like to add RAID 1 functionality on a PowerEdge 860 server we have at the office.  I was unable to determine what is the Dell Reference number for the RAID controller for that server.

  Is there a Dell RAID controller with BBU Cache memory which can support the PE860?   Would the PERC 5 / i raid controller work?  If so, what model number of Dell is compatible.  As the PE860 has long been considered his retirement there is nothing from the Dell Web site.  Searching the Web I found not less of 6 different numbers of parts Dell for a PERC 5 / i controller.

  Thanks in advance if anyone can be useful.

  -Paolo

  Hello Paolo

  PF100

  Is there a Dell RAID controller with BBU Cache memory which can support the PE860?

  No, the only supported the internal RAID controller is the SAS 5/IR. The SAS 5/iR has no cache. The PERC 5 / I is not supported on the 860. The only controllers that contain cache are external controllers as the PERC 5/e.

  You might be able to get a PERC 5 / i for work on the server, but we have not posted it to the 860. There is not many versions of the PERC 5 / i, which have been released, so I'm pretty confident that most or all of the part numbers you have found work. Whenever we change something on a part given a new part number. For example, if we decide to start using another antistatic bag to ship the PERC 5 / i in then we would give him a new part number.

  You can see here the valid controllers. The 860 is displayed on the inheritance tab:

  http://www.Dell.com/learn/us/en/04/campaigns/Dell-RAID-controllers

  Thank you

• Drives 3 TB for DELL PoweEdge R510 with PERC H700 Controller

  Good afternoon.

  Currently, we have 8 x discs 1Tera in our PorwerEdge R510.

  -1 RAID 1 for the first 2 discs, which have the operating system (Windows Server 2008)

  -1 RAID 5 for the other 6 disks

  We strive to upgrade our RAID 5 with new disks of 6 x 3 TB.

  The problem is OpenManage pointed out that the discs that we inserted the 2 TB, and the State is "unsupported".

  Screenshot:

  Status

  Name

  State

  Predicted failure

  Certified

  Bus protocol

  Media

  Capacity

  Used RAID disk space

  RAID disk space

  Hot spare

  Negotiated speed

  Speed measure

  SAS address

  Status: No reviews

  Disk physics 1:0:4

  Not supported

  NO.

  NO.

  SATA

  HARD DRIVE

  2 047,38 GB

  0.00 GB

  2 047,38 GB

  NO.

  6,00 Gbps

  6,00 Gbps

  4433221103000000

  Status: No reviews

  Disk physics 1:0:5

  Not supported

  NO.

  NO.

  SATA

  HARD DRIVE

  2 047,38 GB

  0.00 GB

  2 047,38 GB

  NO.

  6,00 Gbps

  6,00 Gbps

  4433221102000000

  Status: No reviews

  Disk physics 1:0:6

  Not supported

  NO.

  NO.

  SATA

  HARD DRIVE

  2 047,38 GB

  0.00 GB

  2 047,38 GB

  NO.

  6,00 Gbps

  6,00 Gbps

  4433221101000000

  Status: No reviews

  Disk physics 1:0:7

  Not supported

  NO.

  NO.

  SATA

  HARD DRIVE

  2 047,38 GB

  0.00 GB

  2 047,38 GB

  NO.

  6,00 Gbps

  6,00 Gbps

  4433221100000000

  The PERC H700 firmware is:

  Firmware version	12.0.1 - 0091
  Driver version	4.31.01.64
  Version of the Storport driver	6.0.6002.18005

  Do you know why this phenomenon occurs? Do we need to do a Firmware Update for the PERC controller? If so, this will delete RAID 1, OS disks?

  Thank you in advance for your help!

  See you soon.

  If you change to UEFI, you will need to reinstall the operating system. UEFI completely changes the way the operating system reads the system hardware, so there is not a way to avoid a reinstallation.

  The firmware update will not affect the RAID array.

• Looking to replace a RAID in older (UCS-61) with a new (UCP-51) Perc 5i controller on a PowerEdge r610 server...

  Hello world

  I'm looking to get RAID 5 in an old R610 capabilities we have laying around. The new controller seems to be compatible with the server and he knows well. Whenever I start the server with the new Perc 5i card it gives me:

  "Invalid pcie card found in the internal storage location.

  System stopped! »

  Is there a step in this process I am missing? This is my first time doing something like this and get beat. If I put the old controller to back in or no controller at all, it starts without a problem. I've updated the BIOS BIOS server Dell R610 version 6.4.0.

  Any advice would be greatly appreciated.

  The PERC 5 is not supported on the R610.  You need the PERC 6 / i.  The PERC 5 might work, but you cannot use it in the location of storage dedicated; you will need to try another location PCIe.

• Problems with the raid PERC S100 controller

  Hi all

  Recently, I bought a Dell R410 server with a raid PERC S100 without search controller before that. Problem is that I need to install a Linux OS and as it seems, this controller does not support linux.

  Because I was in a hurry, but they can also help in my situation, I bought the following cables:

  

  Apparently, I don't have a slot for connecting the cables... :)

  So my question is. Is there a solution to this problem? I tried to disable/remove the S100, but the MB does not detect hard drives. The server is with a bottom of basket.

  I actually found this thread in the forums-> http://en.community.dell.com/support-forums/servers/f/906/t/19472600.aspx, but unfortunately, I couldn't find the cables posted in the thread.

  Here is an actual photo of the machine:

  

  This server will support the SAS 6/ir, Perc 6 / i and controllers Perc H700. you will need to run linux on this server. The SAS 6/ir is limited to RAID 0 and 1; Perc run several RAID levels.

  If you get the SAS 6/ir or Perc 6 / i, you will need this cable:

  69V70 cable, 6i/SAS PERC 6i/5 at the bottom of basket of 6G

  For the H700, need you also this cable:

  N262J cable HARD drive; Map PERC H200/H700 b/p (Mini SAS to Mini SAS

  Concerning

• How many berries is compatible with PERC H730P controller?

  The H730P controller supports RAID 10 dies in car 4 x 4?

  Hello

  sandy98g

  The H730P controller supports RAID 10 dies in car 4 x 4?

  Yes

  The limits on the H730 exceed most of the hardware configurations. The H730 supports up to 64 virtual disks, you could theoretically have 64 x 4 disk RAID 10 s.

  There are length of scope and limits of disk to consider as well, but this configuration is not near any limitation of the controller.

  Thank you

• Help needed with two new HHD to RAID 1 PERC 6 / i integrated controller

  We have a client that has an out of warranty PowerEdge T610. On the Dell OpenManage Server Admin, I can see that he can see my 1 RAID PERC 6 / i integrated controller. On one of the controllers, we have a RAID 5 that has 4 discs dedicated to a data store (drive D), we two discs devoted to the Windows SBS 2008 (drive C) operating system on RAID 1.

  When we look at the server, I have physical disks located in:

  Our drive D data store:

  • 0:0:0
  • 0:0:1
  • 0:0:2
  • 0:0:3

  Our reader C found in:

  • 1:0:4
  • 1:0:5

  We just added two new hard drives for RAID 1 based on the conversation we had with Dell, they recommended that we can try from C data to the new larger disks. When to Dell Open Manage looking at the physical disks on the PERC 6 controller / i integrated, I can see that it has detected two new 500 GB SATA drives that the client installed. However the tasks available do not allow me nor their format to use as they appear in the management of the computer as a disk that is available for use. Is there something that we are completely absent here?

  Regarding the new disks located here:

  • 1:0:6
  • 1:0:7

  My options for available tasks are the following:

  • Blink
  • Unblink
  • Assign Global relief
  • Claire...

  I already have them deleted once as I didn't know if they should be formatted to be recognized, but in the computer management disk management they don't even appear at all. I thought that I had a task of 'on-line' that I could assign to the readers so maybe they appear to start to use the new storage HHD.

  With regard to the current firmware for the controller.

  • Firmware version: 6.2.0 - 0013
  • Driver version: 2.24.00.64
  • The Storport driver version: 6.0.6002.18005

  I have attached a PDF file to this post to view details on the disks. Sorry for the fine print, but it's a PDF so you should be able to zoom. Any assistance about why readers as not detected in disk management would be absolutely awesome. :)

  -Digity

  PERC does not support non RAID... you can just throw the discs and use them. You'll need to set up and initialize a new RAID array with the readers. It is not a task of "physical disk", therefore in OMSA, go to the page of the virtual disks and click the new link Wizard of VD at the top of the page to create a new VD of the BONE.

• Replacement H200A PERC - inactive volumes RAID - controller okay to activate?

  Hi all, quick question which I * think * I know the answer, but it's a new one on me and all juggling RAID settings in a live environment make me sweat.
  Situation, is that I have a PowerEdge T410 with a PERC H200A controller and two RAID 1 volumes, 600 GB, and 1 TB.  Was a message of "Fatal error 4 Bus Slot" in OpenManage and diagnosis, which points to the H200A, and as a result, the server is not feeding properly in ESXi and one of the volumes is showing that the East in vCenter.  It will not mount.

  Fortunately, I have a spare H200A controller, so I put it in the server and, as expected, is to show the RAID volumes as being inactive.  I'm * assuming that * I can activate just them and they will come to life, but I just wanted to check if somebody do it before and I can confirm that is going to work.

  Thank you

  Tim.

  Yes, you must activate the VD/table. Real PERC, the controller would see a configuration on the discs and you could import the foreign configuration... the terminology on this controller is that he sees a configuration on the disks and you must activate it.

• How to erase the hard drive, foreign State in T630 with H730 PERC controller

  I recently bought a Poweredge T630 Server computer configured with a PERC H730 controller and two 1 TB SATA (raid 1) drives.

  The controller H730 being compatible with no dell certified readers, I bought 2 WD red label records to add more storage space.  The problem I have is it H730 one of the 2 WD drives senses as a 'foreign' drive  Under "available tasks", I see only two options, "Blink" and "Unblink.  Unlike other HDD WD, the controller does not allow me even an option to convert the capable RAID drive.  This only happens to one of the two WD drives. The WD with 'Foreign State' drive is not defective or damaged.  How can I clear the foreign flag on one of the two WD drives so that I can convert the two disks in RAID ready status.

  Hello

  You have a foreigners view tab when you are in the bios H730? If you do, you should be able to use ctrl + N to access this screen, select the controller, press F2 and go to foreign config and have the ability to clear the foreign configuration.

• Mix HD Sas and Sata on the T410 with controller Perc H700 [CF]

  We have a customer using a Sever T410 with Raid Perc H700 controller; We want to add more space to that the creation of a new virtual disk with the connector 1 (now does not).

  Can we add 2 new Sata HD 2 TB of space on new Vdisk also during the first Vidsk is the use of Sas 10 K 300 GB HD?

  We ha 2

  Buongiorno,

  Con passing it mouse sopra identifier c Supporto Dell'e the voce "private message", it could come message privato mandarmi it service tag of server?