All USB ports not working doesn't no causing of mouse and keyboard doesn't work either (considered the source of the problem). Need help fixing without using the mouse or the keyboard.

Similar Questions

• All usb ports not working do not all of a sudden on windows xp

  I have 5 usb ports, which worked very well and all of a sudden none of them work, I checked the status of them in Device Manager and all say working properly?

  Hi Backgammon167,

  The question you have posted is related to Windows XP and would be better suited to the TechNet community. Please visit the link below to find a community that will provide the best support.

  http://www.Microsoft.com/windowsxp/expertzone/newsgroups/reader.mspx?DG=Microsoft.public.WindowsXP.General&lang=en&CR=us

  I hope this information is useful.

  Concerning
  Rehman - support Micrsosoft

• All usb ports not working does not correctly and the video card are not available with DVI cable

  I recently had a power surge and now none of my usb ports are usable, and I had to switch to analog cable to use my monito., also using the beside picture dvi hdmi cable sparkles.   The Device Manager shows everything works and the appropriate drivers are installed. IM using windows 7 with an asus motherboard P5nesli. IM pretty computer savy but it left me speechless. Cannot connect wireless mouse or keyboard, camera, printer, etc.  truble shooter says that it detects problems but wont tell me what they are and can't fix. Help... Thank you

  Hello

  What is the brand and model of the computer?

  I suggest you try these methods and check the status of the issue.

  Method 1:

  Update a hardware driver that is not working properly.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 2:

  Uninstall all the USB controllers, download the latest USB driver on the computer manufacturer site, install on your computer and check the status of the issue.

  Remove and reinstall all USB controllers.

  a. to remove and reinstall all USB controllers, follow these steps:

  b. Click Start, run, type sysdm.cpl in the Open box and then click OK.

  c. click on the Hardware tab.

  d. click the Device Manager button.

  e. expand Bus USB controllers.

  f. right-click every device under the Bus USB controllers node and then click on uninstall to remove them one at a time.

  g. restart the computer and reinstall the USB controllers.

  h. connect the removable USB storage device and perform a test to ensure that the problem is solved.

  Method 3:

  Update your drivers chipset system to the manufacturer's website and check the status of the issue.

• 8460w some (not all) USB ports not working not

  8460w running Windows 7 x 64.

  2 USB ports on to the left of the computer (facing it) do not sign anything when you plug something.  All other ports seem to be in perfect working condition.

  -Updated all the USB drivers

  -Confirmed that nothing is turned off in the BIOS

  -Uninstalled all drivers USB, stop, removed all forms of power, held the power for 1 minute and let stand for 20 minutes

  -HDD Ran, start-up and break-in of diagnostic tests

  -Replacement motherboard

  -Repeat everything with the new motherboard

  There is no windows error, no bubble popup in the system tray and no problems in the system logs.

  Literally my mind stops there.  Can anyone think of anything anyone else I can try?  Any ideas AT ALL would be great.

  Thank you.

  Workaround.

  There was a missing element that was supposed to be bundled with the Systemboards.  It's a small daughter card that inserts directly behind the USB 3.0 ports.  Once I found on another computer, I was able to use it in this machine.  Thank you for your time.

• All USB ports stopped working Windows 7

  Windows 7 Pro. All USB ports stopped working.  When I plug a usb card, windows makes the sound as it connects and the card gets power (light).  I see the map appear in disk drives in Device Manager.  The player does not display in windows Explorer or disk management.  In Device Manager, it has an exclamation point and says that the device cannot start.

  Strangely, I have a USB keyboard and mouse and they work very well.

  It's just the USB drives and chips and SD cards that are not displayed.

  I have:

  Reinstalled the drivers USB MB

  Flashed the BIOS with the latest version

  Tried to install the older USB drivers

  Tried to let windows find the driver.

  Still does not

  None of this has helped.  I ended up formatting the HD and reinstall windows from dvd.

  This revealed that my USB multicard reader was bad.  When I unplugged the problem disappeared.

• USB ports not working do not. Pavilion dm4-3090se

  USB ports not working do not.

  Thanks for your reply.

  no ports were working, so I went into Device Manager, uninstalled them, re-started... and... iola!

  they were back!

  Thank you again for your answer...

  Louise

• 8.1 Windows 64 - bit 3 USB ports not working not

  I have a model computer T430s 2352CTO, running Windows 8.1, 64-bit version. Before upgrading Windows 8.0 all drivers have been updated. The USB ports 3 worked properly, in particular an external hard drive of 1 GB running. After the 8.1 update, 3 USB ports work always, but only for about 30 seconds, then the hard drive stops. The power led remains on the hard drive, but it no longer displays in windows Explorer.

  In Device Manager, I'm gone to Bus USB-> USB controllers Root Hub-> properties-> (under general it says "this device does not work correctly)-> Power Management-> unchecked the box"allow the computer to turn off this device to save energy. Unfortunately, it doesn't seem to stop the problem. Any ideas?

  Please try this:

  http://blogs.msdn.com/b/usbcoreblog/archive/2013/11/01/help-after-installing-Windows-8-1-my-USB-DRIV...

  Thank you!

  Houman

• USB ports not working no-Windows 7 on Imac

  Hello

  I ve just installed Windows 7 on an Imac end 2012, using an external hard drive and running in Bootcamp.
  Everything went well, Win 7 works perfectly, but all USB ports do not work. Everything I plug into their t doesn't get recognized (flash memory usb cards, mouse usb, external drives...).   They work in OSX.
  All other ports (ethernet, audio, output Thunderbolt) work very well under Win 7.
  What I tried, no still no usb operation:
  -Reinstall Win 7 (just to check that I used a mouse usb, what worked very well right up until the last reboot needed to complete the installation.) Subsequently died)
  -reinstall all software Bootcamp (actually, fix, that you can't just unninstall and reinstall) has done that several times...
  -tried to uninstall the usb ports in Device Manager, I couldn't use my Apple wireless mouse more, so I had to restart after the first. Yes, after a restart, he says it's to install the missing disks, yes they are all perfectly... However - install no USB
  -No, no problems appear in the resolution of the problems of the unit
  Do you have any other ideas I could try?
  Thank you very much.
  Marian Nedelcu
  Here is my config Imac. in case it helps:
  IMac 27 inch Quad-core

  3.4 GHz I7,

  32 GB OF RAM,

  3 to FusionDrive,

  NVIDIA GTX 680MX 2 GB,

  Magic Mouse, Apple wireless keyboard

  Hello

  I suggest you to contact the Apple support and check if it helps.

  http://www.Apple.com/support/Mac/

  Hope this information is useful.

• Satellite M30-106: USB Ports not working not

  Hello.

  I have a problem with my Satellite M30-106. One day, the system froze (Windows XP with SP2) during the passage of the machine off. I was forced to keep the button "power" for a while in order to close the system. However, since all 3 USB ports do not work.

  The system does not recognize the "" them. I can't see in Device Manager. I tried to reinstall the system, but it did not help.

  Can someone help me, pelase =)

  Hello

  It looks like a hardware problem. At whatever it is connected to the USB ports at the time? Could you check the USB ports visually and see if they are damaged or wobbly. It is a bit of a long shot, but you may have a short circuit decision and which could disable the USB.
  If the motherboard is damaged then outside fixing/replace your only option would be a PCMCIA USB card, they are not expensive.

  Best regards
  Swarvek

• Satellite A200-1tw psae6e - USB ports not working not

  I use windows 7 ultimate on Satellite A200-1tw (psae6e-06u030du) and my usb ports no longer works correctly.
  In fact they recognize certain usb devices, but not all (for mouse and printer example work, but my USB does not work)

  Looking at the Device Manager, everything seems OK... No problem!

  Does anyone have a solution for my problem.

  Thanks :)

  Hello

  Try resetting the USB ports. This means that you need to remove the USB ports/hubs/controllers in Device Manager.
  Then, you have to restart the laptop to get new USB ports.
  In my case it has worked.

  By the way; I recommend upgrading the chipset driver and disable the feature for each energy-saving usb port.
  This can be done in the Device Manager-> port USB-> properties-> tab to save energy

• Equium A60 - 692 USB Ports not working not

  Hi all - new to the forum and what a good place to find info on Toshiba laptops. Anyway - after a recent storm, I lost connection to my ISP broadband - contacted the helpline who advised me to Exchange my ADSL modem to an Ethernet - made and corrected the connection problem - however - only after having it done I realize has none of my devices (printer, camera, Web Cam etc.) worked via the USB ports. I've uninstalled and reinstalled the system and drivers for devices without result. The device displays 500ma of power manager is available for each of the 3 ports but watch 0ma used. The Device Manager also shows that the USB ports are working properly. Can someone help or advise if these ports on a separate card or they are part of the motherboard. If Yes, where can I get a. Congratulations to all - Andy

  A lighting strike is not good news, if she gets hit by a kind something can go wrong. My guess is that your laptop USB ports has taken suddenly by a massive power surge that probably damaged the chips inside. It could be a Windows problem, or not the only thing I could suggest is to use a bootable Linux such as Knoppix CD and run a command called usbview with some USB devices.
  If the USB has been confirmed dead then your only option is to use an adapter CardBus USB 2.0 providing your CardBus slot is not damaged too.

  Richard S.

• HP Pavilion DV7 2270us: USB Ports not working on HP Pavilion DV7

  I get the USB device not recognized on all USB ports on my laptop.

  I am running Windows 7 (recently did a restore to clean computer) service pack 1.

  I refreshed the BIOS

  I tried to remove all the drivers, stop, remove the battery and restart

  I tried refreshing all USB drivers

  I tried to adjust the power settings to make sure that all power mode on the economy USB devices has been disabled

  Still no luck. From time to time I can plug something and it will work a bit then it becomes disconnected. I think this could be a hardware problem as no intervention software worked. All advice appreciated!

  Miranda

  @mdiakiw ,

  Hello and thanks for the display on the HP support forum.

  Thank you for the great information you have provided to us.  I agree that you did already that you are looking at a hardware problem.

  It seems what's your connection and once the jury warms the connection develops and is then broken.

  The next step would be to contact the helpline for repair options.

  Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  I thank you again for posting. Have a great day.

• USB ports not working not online when using wireless

  Hi, I use windows vista Home premium on a Fujitsu siemens Amilo laptop.

  Until yesterday, I always connected to the internet via a direct connection with my router. Now, however, I have have a direct link and can only connect to the internet through a Wi - Fi

  As soon as I logged online, all my usb ports stop working... I mainly use my mouse and my web cam... the cam sex is essential for my communication with my wife living abroad... Try as I might, I can't get the laptop to recognize any usb... as soon as I'm online... That is to say the internet disconnct, according to my USB again.

  I would be eternally grateful if you could help with this frustrating situation

  Kind regards

  Graham

  Hi CindyThrelkel,

  Try the following steps to resolve the problem:

  Method 1: Run the troubleshooter of material and check what is happening.

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: I suggest you perform the clean boot and check.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 3: You can check after uninstalling and reinstalling the USB drivers , if you are able to connect. You can disconnect all USB devices and then perform the following steps:

  a. Click Start and then click Control Panel.

  b. click System and Maintenance, click System and then click on Device Manager.

  Note: If Control Panel is in Classic view, double-click System and then click on Device Manager.

  If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  c. in the Device Manager, double-click to expand the "USB Bus controllers", right click on the controller host, click "Uninstall" and click "OK".

  Check that if at all, there is an exclamation point on the pilot, it suggests problems with the installed driver.

  d. Repeat step 2 to uninstall all items under 'USB Bus controllers'.

  Then, restart your computer and Windows 7 will automatically reinstall all USB controllers.

  If you are still having the same problem then you can check the device USB drivers updated using windows update. See the following help link:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  If the edge of the question persists I'll ask allows you to check the chipset driver updates you find on the manufacturer's website. The chipset drivers normally integrate USB controller drivers as well.

  You can also check:

  In Windows network connection issues

  http://Windows.Microsoft.com/en-us/Windows/help/network-connection-problems-in-Windows

  Hope this information helps.

• Pavilion p7 - 1380t: USB ports not working not

  The two front USB ports do work not today. Worked fine yesterday. Everything I plug is not coming. Using ports in the back, they work very well.

  Someone at - it ideas about the problem and a fix?

  Thank you

  Hello @xploded16,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I read your post on how the front USB ports on your desktop computer do not work, and I'd be happy to help you in this case!

  To enable your system to recognize the USB ports before once again, I recommend that you follow the steps described in this document on Troubleshooting connections USB (Windows 7).

  Please re-post with the results of your troubleshooting, and I look forward to your response!
  
  Concerning

• HP Pavilion G6-2146sl: HP Pavilion G6-2146sl left USB ports not working not

  Hi, I have a HP Pavilion G6-2146sl with Windows 7 Ultimate x 64... my problem is that the two left USB ports stopped working properly: for example, when I insert a USB flash drive lights up but it is not recognized by Windows. Is the only port that works on the right side of the laptop. I tried to do a search of driver, but Windows cannot find driver. Here is a screen of my Windows device management:

  

  Thank you in advance for your help and sorry for my bad English, I'm Italian.

  Hello

  AMD AHCI, USB 3.0 chipset and RAID drivers