Workflow for the external Site visitor?

Similar Questions

• Table for the code for method of payment for the suppliers site

  Hi all, does anyone knows how to get the value for the code for method of payment for the suppliers site in R12.1.3? I don't speak from that in the following path: 1 Paybles responsibility 2. Suppliers 3. Request for a 4 suppliers. Click on details of payment 5. Scroll to supplier Sites and press the update button 6. Note that, for example among the payment methods is checked as default thanks in advance, A.Stoynaov

  Hello

  Please check this note that contains the query:

  Default values for method of payment for providers at the level of the Table (Doc ID 737128.1)

  You can use this query to view the lines for a given provider site:

  SELECT *.

  Of iby_ext_party_pmt_mthds IEPPM

  WHERE IEPPM.ext_pmt_party_id IN

  (SELECT IEP.ext_payee_id

  Of iby_external_payees_all IEP

  WHERE IEP.supplier_site_id IN

  (SELECT APSS.vendor_site_id

  Of ap_supplier_sites_all of the PSA, ap_suppliers APS

  WHERE APS.vendor_id = APSS.vendor_id

  AND APS.vendor_name = '. '

  AND APSS.vendor_site_code = ''));

  Concerning

  Joel Purswani

  Support of Oracle

• I created a website with Muse using a slide show widget a little over a year.  I gave up Muse bur have recently re-enroll as a single Train to examine the use of Muse. The file for the my site is no longer on my computer or lea

  I created a website with Muse using a slide show widget a little over a year.  I gave up Muse bur have recently re-enroll as a single Train to examine the use of Muse. The file for the my site is no longer on my computer or at least I find and I want to make changes.  Is there a way to download the Internet Web site and bring Muse to make changes or I have to start all over again.

  Hello

  to copy entire websites is an arduous task in my eyes. Your sounds to me that you have access to your old site. If you could perhaps talk to your supplier at the time, to get it back.

  Hans-Günter

• How do you add a google calendar for the web site of muse, the updates are synchronized

  How do you add a google calendar for the web site of muse, the updates are synchronized?

  You can add Google Calendar using iframe which Google provides if you go to calendar settings.

  Once you insert this code into the page of Muse by object > insert HTML, the calendar will be displayed on the page.

  https://support.Google.com/calendar/answer/41207?hl=en

  Thank you

  Sanjit

• Workflow for the deployment TIME of the catalogue.

  Hi team... Am new VCO and I'm not able to find the workflow for the deployment of a paralyzed man in a VDC among the models in the public catalog of vCloud Director. Kindly direct me to the right workflow, method or script if it is available.

  Welcome.

  It's called Instantiate. VAPP model

  Christophe.

• How can I change the default program for the external application Editor?

  I read on the directions for this line and it reads "select a file type in the left pane."   I don't see where it is in the left pane.  All I see in the left pane is 'The browser start Pages' and a 'How do I' pane.  Nothing with the file types.

  Hello

  Welcome to the Adobe Forums.

  In order to change the default program for the external application Editor. Please follow the instructions below.

  Click on the Edit menu, then choose Preferences.

  Once the dialog box is open.

  Click on file publishers.

  In the left pane, you will find all types of files that you want to change.

  On the right, you'll find publishers for this specific file type.

  If you want to add any other application, you must click on + symbol at the top of the right pane.

  Select the path of the application that you want to apply.

  Click Open.

  If you want to primay you can click available main option at the top right. For more detials please check the screenshot below.

  

  Kind regards

  Rajeev

• Several times, I click 'share my location' and he doesn't remember my setting for the Web site - how can I do remember?

  Question says it all. The site info geo, Mozilla application opens a box to ask for permission, I click Yes. And then, without even leaving the page, the site requests geo info once again, Mozilla appears a box again.

  This behavior is impossible to use geo.

  You can manage the permissions for the domain currently selected tab here and set an exception allow to share location.

  • Tools > Page Info > permissions

  You can access the Page Info via the menu on a web page and via the Tools menu (press F10 if the menu bar is hidden).

  You can control and manage permissions for all areas on the Subject: authorizations page via the address bar.

• Where is it save to save a photo library? Requirements for the external hard drive

  Apple support documents have been somewhat vague about the requirements for a player welcome photo library.

  It is not yet clear if Photos can run a file system, is not HFS +: this restriction is mentioned only for the system of libraries of Photos, which syncs with iCloud (https://help.apple.com/photos/mac/1.0/?lang=en#/pht211de786)

  By default, your system library is stored in the folder of images on your Mac, but you can move it to another location on your Mac, or store it on an external storage device. However, to use iCloud services, the external storage device must be formatted using the format Mac OS extended (journaled), also known as HFS +.

  But it is experiences during the migration of libraries, that Photos cannot migrate libraries iPhoto or Aperture libraries to a photo library, if is not filesystem HFS +.  It will try to create the library migrated on the system drive instead (probably because he can't create links hard disk) and generally not running out of storage.

  Apple less did today, confirmed that he is not sure store of the photo library in a synchronized cloud storage, see: update to iPhoto to Photos for OS X - Apple support

  If you store your photo library in a place that is part of a Cloud Computing service (for example, Dropbox, box or Google Drive), your library might be damaged by the synchronization process. So, you might lose photos.

  To see your photos on all your devices, you can use iCloud photo library. To back up your library, you can use Time Machine.

  I still have not found supporting documentation, that clearly indicates if a library of Photos can be stored on a NAS. If it cannot be used as a library of Photos of system.  For the opening of libraries or libraries of iPhoto, the recommendation of Apple was clear: use locally mounted volumes extended, Mac OS X for your Aperture library

  Does anyone found a similar document for the Photos?

  Is it possible to store original files referenced on iCloud by car or in a box?

• RelativeInitialX is valid for the externally triggered measures? NEITHER SMU 5122 64 MB per channel

  For example when you use the following commands

  niScope_ConfigureDigitial (with a positive delay)

  NiScope_SetAttributeViInt32 (NISCOPE_ATTR_FETCH_RELATIVE_TO to NISCOPE_VAL_READ_POINTER)

  followed by

  niScope_FetchBinary16 (loop to retrieve the data most wfmInfo)

  What will be the value of the wfmInfo.relativeInitialX before the external trigger?  It matches?  It is set to a number to indicate the outbreak did not appear until the trigger has been received and it then becomes accurate after receiving the trigger?

  I would use it to make a set FecthForever to date, but synchronized to an external trigger waveforms up to about a minute.

  It seems that the delay of release for the 5122 should be able to hande a minimum delay time of about 170 seconds (at the max rate of sampling more at lower rates), so the data I would need could all be borrowed buffers read-ahead externally triggered and properly after off-delay measurement.

  Thanks in advance for any advice.

  Greg

  In the case that you are extracting data from before trigger (extraction of data before a relaxation was produced., relativeInitialX will have the same value as absoluteInitialX.)

  Kind regards

  Nathan

• How to disable for the external hard drive restore point in Windows 7

  System Restore performs a restore point for my external hard drive, which I did not need, how to change that?

  Hello

  Click Start, right click on computer and select Properties.

  In the left menu, select the System of Protection.

  In the Settings of Protection section, click on the external drive letter.

  If the external disk drive appear on protection, click on the Configure button.

  Select the option to disable the Protection system for this drive.

  Click Apply/OK.

  This should return all the disk space used for System Restore on this drive.

  Let us know the results.

  Concerning

• the shortcut for the external drive icons do not appear on the desktop

  Running Windows 7 Home Premium.  None of the shortcut icons of the program (on my external hard drive) appear on the desktop.  Default icons took their place and launch the correct programs when you click it.  I tried to change individual icons in the correct program ones, but that they would not.  They all used to be there!

  I tried to reboot several times but that has not changed anything.

  The only program added or deleated recently was free archiver B1.  I uninstalled immediately after installing and do not actually use it.

  How to bring back the icons.

  Bill

  Hello Bill,

  Two possibilities come to mind. The first is that the program of the archiver to change icons, in which case you will need to reinstall the program, understand how the icons have been changed, reverse the process and then uninstall the program again. Phew. Its a lot of work, but I got a program do just this thing very to my car icons and it's the process that I had to follow to cancel his "practical work"!

  The other possibility is that his associates to make it an external drive, which is still not very good with Windows. Lets start with this possibility first. First of all, try this Fix It from Microsoft: http://support.microsoft.com/mats/Windows_USB_diagnostics . Not fixed? Try this second difficulty: http://support.microsoft.com/mats/hardware_device_problems/ . Still not fixed? Is the drive recognized by Windows - right disk size / type format?

  If the disc itself is not recognized by Windows, try this trick. Download and install the freeware Aomei Partition Assistant application, download it from here http://download.cnet.com/AOMEI-Partition-Assistant-Standard-Edition/3000-18512_4-75118871.html?tag=mncol;1 - use the link Direct download only. Then once its installed, select the external hard drive, then select Properties. That's it, just by selecting the drive and choosing properties are sufficient to get Windows to recognize the drive.

  Now that the drive is recognized by Windows, has the problem of the icon "disappeared"? If the answer is still no, then I think you need to look at the program archive as a real possibility. The only way to know of course is to install the program again and look for a setting (try Configuration) where the program changes the icons of the programs.

  Post your results here and let me know how you fare.

  Kind regards

  BearPup

• Announcement for the external database - Secure ACS 5.2 or LDAP

  I'm working on the project with Secure ACS 5.2.  I'm trying to determine the external database appropriate to use.  LDAP or directly to the AD?

  In addition, the field in which I connect to a several subdomains.  All users are currently in the subdomains, but will move to the root domain later.  How do I set up the connection, I have to connect to each subdomain or can I connect just to the root?

  Thank you

  Hello

  If you are using PEAP (mschapv2) [password based authentication] your best bet is to tie ACS to AD, because PEAP-mschapv2 is a hash mechanism that is only supported when you bind to AD, it will not work if you use the ldap integration.

  Your best option is to connect ACS for the root domain, so he can use the transitive trust relationships to find the information in its subdomains.

  Thank you

  Tarik Admani
  * Please note the useful messages *.

• Remote Desktop for the external IP address is no longer works

  Hello and thanks for your help.

  For months I could access my desktop from my laptop (via Remote Desktop) / Tablet (via PocketCloud), both inside and outside my network.

  Recently, the external IP address for my router has changed. As this happened, I was not able to access my desktop to the outside.

  Other possible factors:

  -A had a problem of invalid system disk on my desktop which has been resolved by changing the boot order.

  -J' I registered a domain name, which I redirected to the old IP address. I have since updated the domain to redirect to the new IP address.

  I tried the IP address and the URL (using my domain name) to try and MOP with no luck.

  Any suggestions?

  Thank you

  Hello

  I suggest you post this question in this forum to improve assistance:

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

• Media Player deletes all the songs that were added just for the external drive

  I am using Windows 7 media player. I start the media player and my music list is empty.  Media Player begins to add songs to my portable media player. After adding songs it removes so all of the songs added.  What I can do to keep the songs is the library?

  Hello

  1. have you tried to play the songs of the external hard drive?
  When you remove the external hard drive, you will lose the library of the media player library list, it's the design of the media player library and this is how it works in the location list monitoring.
  
  However, if you want to keep the music files in the library even after having remove the external HARD drive, you do not delete the location in the location tracking list. You can add the location to avoid the problem.
  
  For more information, please visit:
  http://Windows.Microsoft.com/en-us/Windows7/add-items-to-the-Windows-Media-Player-library
  
  Hope this helps

• Epson stylus PHOTO RX420, smart panel does not work under windows 7. printer is not on the page to update for the Epson site. anyway I can utalise

  I checked the ASUS driver updates and the Epson site, at - he know any solution to solve?

  Hello

  I suggest you download the Windows Vista of the Epson driver, install the driver in Windows vista compatibility mode.

  Download driver Epson Stylus Photo RX420 for Windows Vista

  http://eSupport.Epson-Europe.com/ProductHome.aspx?LNG=en-GB&data=nKGrQtfEm6mGNGC1zFhTqpXth4Cb4nrV3wAYR2oyEgIU003D&TC=6

  Make older programs run in this version of Windows.

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows