Workstation 8 does not recognize Windows Server 2012 as an operating system

Similar Questions

• Is there a Windows Server 2012 as an operating system option, somewhere in the options for t420?

  I just got my PowerEdge t420, it's my first tower, in fact my first 'real' server other server like before I just used an old pc to run all my necessary tasks in the network.

  I discovered a few minutes ago that I should install the operating system through F10 (lifecycle controller), so I timed "deploy the operating system", but I can't find a "Microsoft Windows Server 2012", I should then click on "any other operating system" or I do something wrong? I know that it supports MW Server 2012 I had an option to buy a 2012 OS Server pre-installed, but I decided to get clean so I can learn basic on how to start up, but I can't find the option.

  Appreciate the response

  In fact, without going into the details, the 2012 option has been removed from the LC with latest driver (v7.2.0) packs, it will be added at the beginning of April with the 7.2.1 version packs driver OS (not SUU)

• What support VMware Windows 7 as a guest host and Windows Server 2003 as the operating system operating system?

  People,

  Hello.

  Because my laptop is preinstalled Windows 7 and cannot dual boot multiple operating systems. I need to install VMware in Windows 7 host and then install Windows Server 2003 as a guest operating system.

  I installed VMware Server 2.0.2 in Windows 7 and Windows Server 2003 operating system as a guest host. Everything works fine for a while. But VMware Server Home Page https://mylaptop:8333 / IU cannot display more.

  I found that Windows 7 is not a host for VMware Server 2 and strange operating system might happen at any time. I found that 'VMware Player 3' is fully supported in Windows 7 as host operating system but is not taken in charge of Windows Server 2003 as a guest operating system.

  People knows what product VMware Windows 7 support as host operating system and Windows Server 2003 as the operating system prompted?

  Thanks in advance

  Hello

  IMHO, I think that Workstation is the vmware product just for you, the requirements

  It supports Windows 7 as a facilitator and Windows 2003 as a host with no problems. You can be confident about it at 100%.

  Best wishes / Saludos.

  Pablo

  Please consider providing any useful answer. Thank you!! - Por favor considered premiar las useful responses. MUCHAS gracias!

  Virtually noob blog

• FoxPro9 is compatible with Windows Server 2008 R2 as operating system?

  FoxPro9 is compatible with Windows Server 2008 R2 as operating system?

  Try the FoxPro Forum

  http://social.msdn.Microsoft.com/forums/en-us/home?Forum=visualfoxprogeneral

  Don

• Can I still use Photoshop on Mac OS 10.10.4 CS5.1? It does not open now that I updated the operating system. Error message: unexpected and unrecoverable error occurred.

  It does not open now that I updated the operating system. Error message: unexpected and unrecoverable error occurred.

  Can someone direct me to a patch file or a plugin that can solve this problem?

  Thank you!!

  Download 5.1 here: test of download Adobe CS5.5: direct links (no Assistant / Manager) | ProDesignTools

  Follow the Instructions of the very Important until you do, or the link does not work.

  If you have registered CS 5.1, you should have your serial number. Otherwise, run the installer and see id he'll do a repair.

• Prerequisites for domain controller promotion is not for windows server 2012

  For windows server 2012 check of preconditions for the promotion of domain controller has failed. TCP ports required by Active Directory Domain Services are already in use on this computer. You must remove or reconfigure the services that currently use these ports (88, 389, 636, 3268, 3269).

  Support is located in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• does not recognize Windows media, dvd player

  I have xp with media player 11. I also have a fast switching with six users on my desk. I think it's a fault of microsoft because a desktop Media Player recognizes DVD, on another it does not recognize my dvd player at all. Am I missing something here? I do * necessary to install the software for each user? None of the answers forum sense.

  I don't know what kind of computer you have, but I had the same problem with my Dell.  After you have reinstalled the sofeware Cyberlink PowerDVD, I have had no more problems.  The DVD have been recognized without incident.

• Soft music 8.1 Windows does not recognize DLNA Server?

  UH... I have it on Windows Media Player don't know not how many years ago. Now it does not support the new "music App?

  So basically... On my Surface I have to install a several years old (no touch) Windows Media Player to play music in the network? Please tell me I'm missing something here...

  And no, I don't want to store the files locally. And you don't have a tablet of TB 4 so I can store it all.

  Monday, July 14, 2014 14:41:09 + 0000, Carlos j. S. wrote:
   
  | So basically, you're saying that music App does not support DLNA.
   
  The music app supports DLNA PUSH but not PULL DLNA.
   
   
   
  __________________________________________________________________________________________________
  Barb
   
  MVP Windows Entertainment and connected home
   
  My Blog - http://digitalmediaphile.com/
   
  Connected world Blog Reader Windows 8 App Barb-
  http://apps.Microsoft.com/Windows/en-us/app/barbs-connected-world-blog/02f35769-52bf-461C-b1d5-06e54a58d298
   
   
  Windows and Surface drive Windows 8 App community
  http://apps.Microsoft.com/Windows/en-us/app/Windows-and-surface-community/0abb150e-D287-47d4-837E-9fa51f485ad7
   
   
   
  Please mark as answer if that answers your question
   
   
   

• P1102w: Problem installing P1102w, PC, printer is on does not recognize, Windows 8

  I have problems to install the printer.  Loads of software and extracted, then when I go to wireless network connection, it says he's expecting me turn on the printer when the printer is turned on and connected to the USB port.  I even changed USB ports.  It is still not let me install.

  Hi @gawright59,

  I see that you have problems of configuration of the printer on the wireless network, the printer is not recognized as the USB connection during installation. I will definitely do my best to help you.

  This can occur when the printer is already recognized as the USB connection and windows does not yet detect.

  The best way to solve this problem is to unplug the USB cable, run uninstall and reinstall the printer software again. Do not connect the USB cable until you are prompted during the installation. Select the wireless installation. (do not install the printer as a USB connection and then run the Wireless Setup Wizard)

  The other way to resolve this issue when you receive the message, is to leave the USB cable connected, remove the printer in the devices window and printers and Device Manager.

  Here are the steps for access to the devices and printers and Device Manager.

  From the desktop, hold down the Windows and X. This will bring up a list, open Control Panel and then devices and printers. Right-click on the printer and on the left, click on uninstall.

  To access the Device Manager:

  Press the windows key and press X on the keyboard at the same time in the office.

  Then click on Device Manager in the list.

  Verify that connections in Device Manager for the entries of the printer, under Bus USB controllers look for a USB print media or anything with an exclamation yellow, storage device or an unknown device. Right click and uninstall the device.

  Then reconnect the USB cable and it must be detectable again.

  Feel free to click on the "Thumbs up" button below if it helps.

  If there is anything else I can help you, let me know. Thank you.

• Hyper-V does not recognize the server RAM upgrade

  I just upgraded my Dell PE2950 server running WIndows Server 2008 and Hyper-V to 32 GB of Ram-> 64 GB of Ram.

  The o/s recognizes the 64 GB of Ram, but Hyper-V shows still 32GB Ram on his info page...

  Any help appreciated

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows 7 networking forum.
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• ColorJet 475dw moved not on windows server 2012

  During the installation phase, I get a fatal error:

  A fatal error occurred prevents use of the product.

  Click 'Cancel' to cancel the installation.

  No reason. No work around. Reset did not work. Download the basic driver came with the same error.

  UPDs are only printer drivers.  There is no reason why you could not take the UPD on a print because of a limitation of scanner server.  UPDs can coexist with separate scan drivers.

  If you have to scan drivers and then find http://support.hp.com pilots and the area of download for this printer and your operating system.  Scan drivers are included in the comprehensive software solution.  When a comprehensive software solution is not available while the drivers can be downloaded from Microsoft as a Windows Update.  Once you have the scan drivers so that you can use 3rd party scanning applications to complete your analysis work.

  HP has a comprehensive software solution and a basic scan and print driver solution.  Either people should work fine.  If they do not then install the components manually pointing the Hardware Wizard to the installation folder during the analysis of your device manager.

  HP keeps a log of installation somewhere under C:\users\\appdata\local\temp.  The directory to search by date and look at all the logs starting with HP.  Review logs and to observe that the last operation was before the error message popped up.  This should help you to isolate what was wrong so you can fix the problem.

• Red Apple icon shown when loading the software containing the two Vista and Apple software - does not recognize Windows

  I recently bought 2 bits of software that contain the Apple and Microsoft (Vista) versions on one CD.  When I insert the CD into my Vista PC, it can not find or load the installation files.  Instead, if I look at what is on the drive, I see an icon of the Red Apple.  If I put the same CD on Vista PC to my wife, it loads correctly.  If I load the version of WIndows 7 software, it loads correctly and run the program until he acknowledges that the operating system is Vista not Windows 7.  Something triggered something on my Vista PC to do brand new loading on my CD player program needs to ignore files in vista and show files apple as if they were independent.  Is there a toggle for this problem?  If I run the software of Microsoft ' Fix It' - the solution that I see on most boards, it does not.  As far as I know, other Vista users are facing this problem without solution by MIcrosoft or any other tech tips.

  The problem is with a program from Mediafour.  It's called xplay 3.  If you uninstall this program, everything works fine.

• Does not start after the reload of the operating system

  OK, this is my story of boredom.  I have a Lenovo T61 Type 6463-5BU, S/N L3-xxxxx.  The hard drive died a few weeks ago, and since then, I have received a replacement drive under warranty, that is the exact same drive type.  We had a backup image of the old system under Norton Ghost and managed to get the image to the new disk once it has been installed.  To do this, we used a utility called OS
  'BartPC '.

  Since then, I did pretty much everything I can think of to get the system to boot, including playing with the BIOS settings, setting the drive to 'boot' and 'active' with the help of a number of public services, including the good old "diskpart" and many others.  The reader will just not start.  A few times I could read the disc using Bart in command prompt mode, but I never managed to boot from it.

  The laptop has a finger print reader, but I was told several times that this has nothing to do with the problem.  So... before I cut off the finger of a person and drag in the player... What am I doing wrong here?

  Note of the moderator; s/n, under the direction of protection own members

  AGoodSolutionideas can save I hope as your image.

  For later use, take a look at this document from Lenovo on the use of Ghost; Partition does not start after being restored with Norton Ghost - NetVista / ThinkCentre / ThinkPad...

  I know it says 'prior to 2004 systems', but it is still topical.

• Apps for Universal Crossword does not recognize the server.

  I use an Officejet Pro 8500 a and Windows 7 on a wireless network. I downloaded a few applications of ePrint. Other applications work very well, "(Proposals) Forms', 'News '. Software Universal Crossword doesnot function in I get an error message "the printer could not connect to the server." Y at - it a problem with this App that don't have any others?

  Hi jcope10248. This error is specific to the printer, connecting to web services and not necessarily the application itself. I recommend you contact HP Cloud services @1-855-785-2777 since they will have real time information about the service. The number is free of charge and the service is free and requires that your printer is in warranty.

• Protocol RTSP does not recognize Windows Media Player 12

  I am trying to broadcast a live stream via RTSP and get the error: "Windows Media Player cannot play the file because the specified protocol is not supported. If you typed a URL in the open URL dialog box, try using a different transport protocol (for example, "http:" or "rtsp:"). »

  I read http://support.microsoft.com/kb/940029/en-us and tried the suggested resolutions, and they did not work.

  I removed WMP by "turn Windows features On and Off" and then manually deleted WMP of Program Files, and files in the directory of the user. Yes, I restart after turning off the WMP.

  The URL is valid, I can get through VLC stream very well.

  I have disabled the firewall to try to verify that it is not blocking ports (you would think that it would not block ports since I can get the flow through VLC, but I tried just in case where).
  I also reduced my security settings of IE for the smallest settings to see if it was a question of settings. Still have the error.

  I do not have McAffee (others have suggested that this could cause some problems with streaming).

  I'm running Windows 7 x 64 professional. Other computers using Windows 7 x 64 Pro can get the Windows Media Player 12 RTSP stream (I checked that they have the same version of WMP that I do).

  I compared the registry settings between computers that work and mine for Windows Media Player without success.

  I tried to connect to the different RTSP stream and I get the same error, as shown above.

  I could really use help I am running out of ideas.

  Hi Fred,

  The question you have posted in better suited in the TechNet forums.

  I recommend you post your request in the below link:

  Windows 7 IT Pro:

  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro

  I hope that the information above helps you.