P1102w: Problem installing P1102w, PC, printer is on does not recognize, Windows 8

Similar Questions

• I installed my USB drive but it does not recognize my imac. Only allows me to insert a disc.

  I installed my USB drive but it does not recognize my imac. Only allows me to insert a disc. I'm on OS 10.6.8

  The requirements for the SuperDrive Apple USB are:

  The system configuration required

  Compatible with the following computers:

  MacBook Pro with the Retina display

• 5520 e - ONE - IN - ALL printer: my computer does not recognize my wireless printer

  I've done all the troubleshooting that was recommended.  The printer is connected to the network and my computer is also connected but when I try to add the IP address of the computer to connect to the computer, it does not recognize the IP address.

  Direct wireless is for printing by a device to connect to the printer instead of a network. I would like to disable the function.

  That being said, here's what to do next:

  1. Turn the printer off.
  2. While the printer is turned off, disconnect the power cable from the back of the router for a minute.
  3. When the lights come back on the router, turn on the printer.

  Now:

  • If the IP address of the printer starts with 169.254, the printer is not getting an IP address from the router. Contact who provided you with the router to determine why it is not assigning IP addresses.
  • If the IP address of the printer starts with 172, the printer is connected to a network of comments. Contact those that you provided with the router for assistance with deactivation of the feedback network.
  • If the IP address of the printer starts with 192.168, the printer is properly connected to a network.
  • If the iP of the printer address begins with any number of other, the network is maintained. Contact one that keeps your support network.

  Please let me know the results after following the above. If you are unable to resolve your problem, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• Problems installing drivers for printer EPSON L110. Error message "Windows could not determine the language to use for the installation: CODE of ERROR: 0x80004005.»

  Original title: trouble installing the drivers for my printer.

  Hello

  I am trying to install an EPSON L110 and eveytime I try to run the CD, it appears this error message.

  Windows could not determine the language to use for the installation: CODE of ERROR: 0x80004005.

  I have windows 7 32 bit OS. What I'm doing. A quick response will be very useful.

  TKS

  Gerard

  Hi, Germain,.

  This problem could occur due to corrupted files. We will try to download and install the latest printer driver on the site of the manufacturer of the printer. Check if it helps.

  http://www.Epson.co.in/epson_india/ink_tank_system_printers/product.page?product_name=Epson_L110&tab_index=4

  See the articles for more information.

  Install a printer

  Find and install printer drivers in Windows 7

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• Problem installing RCU with ADR: database Version does not match

  People,

  Hello. I have implemented PeopleSoft Campus Solution 9.0 revision 5 for a University.

  I need to develop the application for Admission online for future student to apply for admission.

  My installations of PeopleSoft are below:

  Server machine: Oracle Linux 5.10 (64-bit)

  Client computer: Windows XP Professional (64 edition) with the Internet Explorer browser

  Architecture Internet Oracle Linux 5.10 Server:

  (1) database server: Oracle Database 11 g version 11.1.0.6.0 is

  (2) the server application: Tuxedo 11 g

  3) web server: logic of Web 10.3.6.0

  (4) browser: Firefox Mozila

  (5) two Instances of huge database on the database server: 8.53 PeopleTools and Campus Solution 9.0.

  In order to develop the application for Admission online for students from the perspective, I need to make 3 parts below:

  (1) ADR installation (Application Development, Runtime) 11.1.1.6.0 (64-bit)

  (2) install the RCU 11.1.1.6.0 to create the scheme of OWSM_MDS (32 bit)

  (3) create or expand the WebLogic domain

  I installed Oracle ADR 11.1.1.6.0 (64-Bit) with Weblogic 10.3.6.0 in machine Server Oracle Linux 5.1 with success.

  Now I install RCU 11.1.1.6.0 (32-bit), on step 2 of 7 audit of the overall requirements, I face a problem like below:

  Type of database: Oracle Database

  Host name: 192.168.196.102

  Port: 1521

  Service name: HRCS90

  User name: SYS

  Password: mypass

  Role: SYSDBA

  Database is connected successfully. Verification of the 2 first elements are passed successfully.

  But check the 3rd issue "Check condition for the specified database" has not passed. The error message is below to:

  "The database that you are connected is not a supported version. Enter the database with version equal to or greater than 10.2.0.4.0 in 10 g or a version equal to or greater than 11.1.0.7.0 in 11 g. See the matrix of certification for the supported DB version".

  My database is the database Oracle 11 GR 1 material which is 11.1.0.6.0. This version corresponds to Tuxedo 11 g and WebLogic 10.3.6.0. If changing the database version, the entire Architecture of Internet PeopleSoft should be changed.

  The version of the RCU I install is 11.1.1.6.0 (32 bit) which does not really match ADR 11.1.1.1.6.0 (64 bit).

  My questions are:

  (1) what version of the RCU can be installed with Oracle Database 11 GR 1 material is version 11.1.0.6.0 (64 bit) and MARC 11.1.1.1.6.0 (64 bit) ?

  (2) is there another way to solve this problem? Find the right version of the RCU or update the version of database?

  Thanks in advance.

  Or you can try to do this work around (this work around will ignore checking the version of database)

  http://www.xenta.nl/Blog/2009/11/17/install-Oracle-fusion11g-repositories-on-11g-DB/

• Compaq 5008 MT, fresh install win7 pro. PCI slot does not recognize the card wireless linksys, (wmp54g)

  My hard drive doesn't have the other day (western digital 320g).  He left me stranded, I installed a new HD, installed windows 7 pro costs.  Everything seems to work except for my linksys PCI slot wireless network card.  In my control panel, I have a yellow on my network controller in the properties of the material.

  All ideas, it won't let me add a driver?

  I installed windows with the card in the slot, which shouldn't matter should it?

  Averagejoe56553 wrote: windows 7 pro 64 bit, version 4 linksys

  Hello Averagejoe56553, it seems that Linksys does not provide drivers for Windows 7 x 64. Wireless chipset used in the Linksys Card made by Ralink and they throw a few Windows 7 x 64 drivers for this card.

  Here a link to Ralink is where you will find all the Ralink drivers.

  Here is a link where the drivers for your card.

  You will be asked to enter your name and e-mail address to access the doe to download these drivers.

  If the one I linked to does not install or work on your Windows 7 x 64 system, try another version on the first linked page.

• My ATC-220-EB52 having problems installing Nvidia GTX card 750i, screen does not light

  I can't be the only person that this pain I download the latest Acer drivers, tried downloading Nvidia Geforce experience (all-in-one) and who won't because he repeats to me (you have no found GPU).

  tried a HDMI cable from the motherboard graphics for CPU, nothing.

  Problem solved!   Was a certified technician come out and go on the computer, so it was a simple matter to remove the VGA cable and replacing it with a cable to connect to the DVI - D port on the graphics card and monitor. That's all!  No BIOS update or re - install windows 10 required.

  All load great and was able to get all my loaded drivers from Nvidia without problems, computer is happy and me Jordon Merci i. for all your help, quite difficult to do no matter what diagnosis with output physically while watching something.

  Concerning

• Want 4500: Printer 4500 desire does not recognize my password wireless

  I bought a new printer 2 weeks ago - the installation was successful, and I was able to print several times on the wifi network. But for some reason any it stopped working a week later. I now have a blue light flashes next to the wifi on the printer symbol and when I get the wifi settings, select my network and enter the password wifi the printer tells me that it is a wrong password and it cannot connect. I also tried to restore the settings of the default printer, however, I get the same problem.

  I scoured the web & forums to find a solution to it, but without success. Please tell me how I can fix the problem! Thank you!

  Yup blue flashing light means that you are not connected to your routers SSID. For test purposes, remove your SSID of the router password. Now try to connect to your SSID unsecured? Are you successful? If so, go back and add a WPA2-AES encryption with your password.

• I installed Acrobat Reader DC but Safari does not recognize that it is installed

  I get a message on a Web page that says that I need a later version of a PDF Viewer as well as a link to install Adobe Reader. I installed it and when I come back to the Web page, he always tells me I have to install Adobe. When I go directly to Adobe to install the latest version it says that it is already installed.

  Hey mh70182433,

  Please try to run the cleanup tool "Download Adobe Reader and Acrobat tool - Adobe Labs" to remove all traces of your computer, and then reinstall the software from here:

  Adobe - Adobe Acrobat Reader DC Distribution

  Let me know if the error persists.

  Kind regards

  Ana Maria

• I installed SP3 but WinXP Pro still does not recognize my 250 GB HARD drive. He returned to only 127 GB. Y at - it a patch or a patch that will fix this?

  It is a SEAGATE HDD.
  I have XP Pro with SP3.

  Hello AaronNoonan,

  1 have you checked the State of unity in disk management?

  2. have you checked if there is any disk not formatted or raw hard disk space?

  3 of internal drive or external drive are. what type you referring?

  I suggest you check if there is any formatted raw partition on disk management. You can check the link that will give you information on the management of records below:

  http://support.Microsoft.com/kb/309000

• Cannot use my printer Officejet 4635 to the Mexico. Printer does not recognize the new cartridge.

  I moved my printer in Mexico City, HP Officejet 4635. It uses #61 cartridges. I was told that the 61 in the United States is the same as the #122 to the Mexico. However, the printer say it does not recognize the cartridge.

  Can someone give me some advice?

  Hi artist1234,

  Welcome to the HP Forums.

  Why the printer does not is because the unit is not regionalized for this part of the country.

  To get the printer to work, you will need to contact HP Total Care so that a representative from HP can regionalize the printer for you.

  If you call in North America, the number is 1-800-474-6836.  Seeing that you are in Mexico, please click here to access the information page you need.

  Thanks for your time.

  See you soon,.

• Computer does not recognize SD card inserted in the printer

  I just bought an Officejet pro 8600.  When I insert an SD card or Memory stick into the printer, my computer does not recognize it so I can't transfer my photos.  This new printer allows is no longer this action?

  Good to know, message back me when you are ready and I will do everything I can to help you out!

  Have a great day and a wonderful weekend!

  -Spencer

• Windows 7 and install/recognize the problems of printer HP LaserJet P2015 error - USB Device not Recognized One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it.

  Title: Windows 7 and install/recognize printer HP LaserJet P2015 teething problems...

  I have a dell inspiron that was originally windows Vista and I changed to windows7.  I have a LaserJet where I work, a HP LaserJet P2015 printer and when I plug in the USB, it says (peripheral USB not Recognized One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it.

  How and what should I do to get the printer going or to get the computer to recognize.  Installation CD will not work and I looked online and downloaded drivers but still the same thing.

  Hi LOliver,

  Method 1: Run the hardware and peripheral troubleshooting tool and check if it makes a difference.

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: Disconnect all USB (Universal Serial Bus) devices connected to the computer (unless your mouse and keyboard). Connect the printer and check to see if the problem persists.

  Method 3: Connect the printer to a different USB port and check.

  Method 4: Reinstall the USB (Universal Serial Bus) controllers.

   First of all, please disconnect all USB devices and then perform the following steps:

  (a) click on 'Start', type device manager in the search bar and press "Enter." If necessary, click on continue.

  (b) in Device Manager, double-click to expand the "USB Bus controllers", right-click on the "host controller", click "Uninstall" and click "OK".

  (c) repeat step 2 to uninstall all items under 'USB Bus controllers'.

   

  Then, restart your computer and windows will automatically reinstall all USB controllers.

   

  HP printer drivers- ensure that you download the driver appropriate for your device model package.

   

  Thanks and greetings

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************
  Visit our Microsoft answers feedback Forum and let us know what you think.

• HI - even if I installed a new cartridge (black), the printer does not recognize it

  Hello - I have an officejet 4500 - G510a, and even if I installed a new cartridge identical to that just missed, the printer does not recognize it and don't use it. I would really appreciate the help on this one. Thank you

  Also please mark it as accepted if Solution my answer has solved the problem.

• HP G6-1184SA: Bluetooth problem - not installed / display upward in Device Manager - does not at all - HELP!

  Hello

  I just reinstalled windows 7 64 bit on my HP G6-1184SA.

  I managed to get all the other drivers to work from the Drivers HP section on the Web site.

  However I have a problem with drivers Bluetooth.

  • It does not appear in Device Manager.
  • It is obviously not working and I don't even know how I get it to the settings to find/installation/use.
  • I tried all the drivers Bluetooth 4 under my driver on HP product page. (2 of the drivers made me have BSOD and I got in safe mode to remove).

  So basically, I want to get the Bluetooth on my laptop at work - there is no key on the keyboard or button to activate it - but I know there are as I've used it before you reinstall the operating system.

  Please notify.

  Thank you.

  Hello:

  The page on the link below product specification indicates that your laptop does not come with built-in bluetooth.

  If so, this feature would be are indicated as well as the specification of 802.11 wireless connectivity b/g/n.

  http://support.HP.com/us-en/product/HP-Pavilion-G6-1100-notebook-PC-series/5082224/model/5119776/document/c02863651/

  If you still believe without a shadow of a doubt that your laptop came with bluetooth, little matter what the State of the record, then the only suggestion I can offer for you to install the HP software Connection Manager and see if you can turn on the bluetooth car radio using this software.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-112799-2&cc=us&DLC=en&LC=en&OS=4063&productOid=5119776&sw_lang=&product=5119775