WPC11 Setup utility

Similar Questions

• Satellite A300: cannot start: blocked by Phoenix TrustedCore Setup Utility

  {SUMMARY: "Phoenix TrustedCore Setup Utility" appears every time you start, requesting a non-existent password.} How to get rid of this request? }

  This one is a little weird. We have a Tosh Satellite A300-193 mobile (Code manufacturer: PSAJ1E-01000XEN) purchased from July 2008 (via Getech educational scheme). We have (had) Kaspersky Anti-virus on this subject, but since his license has expired (and they didn't really like it), I was going to remove and install Avast.

  Kasperky removal instructions involve have their tool "kavremove" who say their instructions must be run in safe mode. So, after downloading the tool, I pressed F8 to boot into safe mode...

  ... And that's where things went wrong. Instead of typical black screen startup options screen, I got a splash screen at the level type, with a request for password of "Phoenix TrustedCore Setup Utility. We have never set a password on this computer, and I've never seen this particular screen before. After three bad guess (of course they're wrong!, and it does not matter if I leave the field blank), the unit turns off.

  Now when I turn it on, it just goes right to the request for password of Phoenix: I hit F2, F12, F8 or whatever it is. I can't establish why it should do, or how I can possibly bypass it. None of my password guess work (of course).

  I googled for hours (literally), closes the thing, I could find were instructions in [a post on the forum USA | http://forums.toshiba.com/t5/Windows-Vista-Windows-XP/Satellite-A205-Cannot-Access-BIOS/m-p/123075#M7749]. It was a partial solution: we can start the machine with this procedure (phew!).

  Unfortunately, it is not a permanent solution. After EACH stop, at the next start-up presents impossible demand "password." So it comes to pull the battery (again), to the phase of "discharging", battery, turn on and - it boots. Or at least, he has every time so far.

  This is going to be extremely painful. Any tips or to tackle the problem of pointers, which would be welcome. I will never see this request for password "Setup Utility".

  Thank you!
  David
  Edinburgh, UK

  Hello

  I think the password loss is the BIOS password.
  I m wondering why this password is displayed when starting if you have not set it

  However, the point is that the BIOS password can be removed if you n t know this password.
  Unknown BIOS password can be removed by a Toshiba authorized service partner.

• Install the hardware setup utility - incorrect serial number

  Hello

  When I try to install 'Hardware configuration utility' 1.48.0.11C or 1.48.0.09C on my TOSHIBA X 200-245, I get the error message "invalid serial number" (in French: the serial number is incorrect).

  How can I do?

  This utility is no name on my laptop.

  Thank you

  Hello
  What operating system do you use? If you are using Windows XP you must install Hardware Setup Utility Version 0.48.21.C. You must take care, to use the version appropriate for your operating system. There is little difference between these versions.

  Check this page for your version: http://eu.computers.toshiba-europe.com (Support & downloads)

• popup red screen cmos setup utility

  When I start windows, the normal start screen shows but then stops at halfway. He then asked: press F1 to resume. When I press F1 a red popup CMOS Setup Utility screen opens ads settings. How can I stop this screen to come and slowing down the boot process?

  I think that this problem started when I installed "windows security essentials". Would it perhaps be the problem or is this another place?
  Pending a solution.

  Hello

  I suggest you start in the last known good configuration.

  See the site:

  Using the last good known Configuration

  http://Windows.Microsoft.com/en-us/Windows7/using-last-known-good-configuration

• insydeH20 Setup utility

  Dear Sir.

  I have laptop Acer V5-473PG for over a year now and using W8.1. My problem is now (for a month), whenever I start my laptop, the screen goes to "insydeH20 Setup utility". Then I have to press ESC, press enter for 'Yes' and the screen will continue to Windows. FYI, my W8.1 works fine as far as I can see.

  This happens every time whenever I have boots / starting my laptop. Is it a bad sign for me? My laptop goes R.I.P?

  Thanks in advance.

  fenolly75,

  Sorry to hear that you have problems, there are a few things you can try:

  Enter the BIOS and restore the default values to make sure that there wasn't something changed accidentally.

  Attempt a repair to start on your system to see if that solves the problem.

  Try a system restore before you start having this problem.

  Perform a refresh to try and repair the Windows operating system files, some programs may be lost with this feature, that's why I introduced it last.

• Acer Aspire V3 - 772G - BIOS setup utility menus have disappeared

  Acer Aspire V3 - 772G - BIOS setup utility menus have disappeared

  I have install this laptop brand new, pre-installed with Windows 8.1 for my sister-in-law who bought it.  The installation went well BUT the 16 GB USB device I bought such as advised by the literature of Acer to store the recovery partition was not large enough, 14.4 GB physical capacity.  Acer the book says to use a 16 GB or more, so I did.  I naively thought that a USB key which has been marked 16 GB would be appropriate.  Not the case.  I had to buy a bigger but am still waiting for delivery.

  So I decided to any HARD drive to save the work I had done, but found only the Acronis Backup and Recovery DVD would not start the image.  I went into the utility configuration and adjusted the start parameters to inherited and modified device priority.  Acronis wouldn't so I did not continue.  I went back into the configuration utility, use F9 to restore the default value and to my astonishment that the DUAL boot option was now gone and Windows startup option was also gone.

  This means that £800 this laptop is now unusable.  The installer standalone reconfigured without warning.  Nowhere is there at - it advice or advice do not use the Setup utility when it erases the features that cannot be recovered by using F9 to restore the default configuration.  If this isn't a serious design flaw, I don't know what is.

  I am deeply worried because the idea of a BIOS setup utility behave in this way seems so unlikely that I wonder if anyone will believe me.  How are the Setup utility has been designed to self-harm like this?

  Your suggested action works!  Thank you very much.  You saved my life.

  loungehake

• Laptop turned on, password appears on black screen, windows loading bar appeared, then got two options in the BIOS Setup Utility and change Boot Device order, I don't know what is happening, help please!

  My sisters notebook froze and she turned off the power switch, when she turned on the screen was black and a password box appeared when I entered the password, the XP loading bar came as usual and then I had two options at the bottom of the screen. We want to press F9 for and the other was to press F10 for BIOS Setup utility, after seconds, the screen went black and then appeared again the password and the circle continues. The laptop is only 1 week and I don't know if it's something she did or if it's a technical foul, I would be grateful if someone could help me or if I should take it to a technician. The laptop is a Compaq Mini 110 and it works on Windows XP Home Edition.

  Hi, your sisters Notebook is under warranty and it could be a hardware problem.

  As the laptop is only one week.

  I suggest that advise you your sister back to the place where it has been sold since.

  Slan go foill, Paul

• Phoenix-AwardBIOS CMOS Setup Utility request password it says invaild

  my ex-friend has something to my computer then took it attaches from his friend-friend and when I got back the name of the system is changed, I think my proccessor changed because all my pictures have disappeared and other pictures are in my computer when I press F10 when I turn on the computer as Phoenix-AwardBIOS CMOS Setup Utility request password it says invaild so I don't know that it has been changed. so my question is how do I get control of my computer again and go to the BIOS CMOS Setup on my computer utility?

  You can check with the motherboard manufacturer for instructions to reset the BIOS password.

  "About questions about hardware BIOS password reset, we ask that you direct customers to the appropriate resources on the sites of manufacturers of equipment for the correct procedure."

  Maintaining secure passwords - Microsoft strategy on getting around passwords:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

• Get a Boot Manager error the amount of system memory has changed strike F1 to continue (I have F1 race) or F2 to run the Setup utility

  OT: Sign in

  I got this alert several times before the alert "windows boot manager".

  The amount of system memory has changed (I have more or less?)

  Strike F1 to continue (I have F1 race) or F2 to run the Setup utility

  Dell Dimension 3000 system series

  What should I do? Run the configuration utility

  anconcito

  Irfan:

  1 - no

  2 - Yes

  today after trying 'the memory diagnostic tool' I had the same alert, I clicked on F2, but I did nothing I do not know how

  3 - no

  Hello nacienancon,

  1. don't you make changes to the computer before getting this error?

  2 are you able to boot normally to the desktop when you turn on computer?

  3. have you tried to install any device memory on your computer?

  This problem is related to hardware, I suggest that you contact Dell support to help you better. You can check the links with information below:

  http://support.Dell.com/support/eDOCS/systems/opgx620/en/UG/A02/memory00.htm

  http://support.Dell.com/support/eDOCS/systems/opgx620/en/UG/A02/tools00.htm#wp1114195

  You can follow the technical assistance column for more information.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

• No bootable devices strike f1 to retry boot, f2 for Setup utility, press f5 to run onboard diagnostics

  I know that many people have posted a thread with this type of problem, but none of them doesn't seem to be exactly like mine. I have a Dell inspiron e1405. I bought probably a year and a half. It works very well almost all the time I got it. The other day I was using it and everything was fine and I shut down normally and the next morning I go to turn it on and I get a black screen with the words 'no bootable devices strike f1 to retry boot, f2 for Setup utility, press f5 to run onboard diagnostics' displayed at the top of the screen. I ran diagnostics and it said I had no recognizable hard drive. I ran the vista installation disk and tried to fix it and it wouldn't work. He said there is no disc to repair. I went to just install windows again, hoping he will fix everything that was wrong with my hard drive. When he went to install it says that there is no disc in windows partition. I tried reinstalling the hard disk and no chance. It is reasonable to assume that my hard drive is fried, or is there anything else I could do to try to fix?

  Help, please

  Jason

  jpecha03

  I know that many people have posted a thread with this type of problem, but none of them doesn't seem to be exactly like mine. I have a Dell inspiron e1405. I bought probably a year and a half. It works very well almost all the time I got it. The other day I was using it and everything was fine and I shut down normally and the next morning I go to turn it on and I get a black screen with the words 'no bootable devices strike f1 to retry boot, f2 for Setup utility, press f5 to run onboard diagnostics' displayed at the top of the screen. I ran diagnostics and it said I had no recognizable hard drive. I ran the vista installation disk and tried to fix it and it wouldn't work. He said there is no disc to repair. I went to just install windows again, hoping he will fix everything that was wrong with my hard drive. When he went to install it says that there is no disc in windows partition. I tried reinstalling the hard disk and no chance. It is reasonable to assume that my hard drive is fried, or is there anything else I could do to try to fix?

  Help, please

  Jason

  If you go into the BIOS see the drive listed?  If the list... it could well be the MBR corruption.  Good luck!

• How do get you the cell phone of Aptio Setup utility loop?

  My laptop Samsung series 3, which works under windows 8, began to update something and after turning off the power. When he died I turned it back. When it was loading up a strange beep came from my laptop. After the noise he black and showed the Samsung logo. That, he went to Aptio Setup utility. I tried to get out, but it is just the same thing. I tried to change the time system, but did not. My bios version is P07ABF and my laptop model number is NP365E5C. Someone help me!

  Hello

  It seems that you may have to contact Samsung about this problem.

  But see if that helps you.

  http://www.computing.NET/answers/Windows-8/cant-get-out-of-aptio-Setup-utility-on-Samsung-laptop/1513.html

  It is information about codes of "beep".

  "beep" codes normally indicate a hardware problem / failure.

  Go to your computer manufacturer's website and look at the specifications of your PC to see what BIOS you have

  Then read this on the 'beep' error codes to try to see what failed:

  http://www.computerhope.com/beep.htm

  http://www.pchell.com/hardware/beepcodes.shtml

  http://pcsupport.about.com/od/nonworkingcomponent/HT/beepcodestb.htm

  If you are unable to determine the hardware problem yourself, contact the manufacturer if under warranty.

  If it is not under warranty, find a good repair shop premises to take.

  See you soon.

• The computer is stuck on the screen of the Aptio Setup utility.

  My asus laptop is stuck on the screen of the utility facility aptio how this return to the start screen

  Here is the Article of the same

  Try a 2nd

  • Stuck on aptio Setup utility, cannot close the Setup utility...
  • [Aptio Setup Utility] ASUS N56VJ need help - Windows 8
  • Aptio Setup with a keyboard utility no longer
  • Can't get out Aptio Setup Utility screen
  • My X502C Asus Notebook is stuck on Utility Aptio Setup

• Satellite Pro A200 - Supervisor Password Setup Utility fails

  Hello

  I own a Satellite Pro A200-PSAE7E and a license to retail for Windows Vista Ultimate 32-bit Edition (with SP1) is installed.

  Before installing Vista, I have updated the BIOS to the latest version available on the Toshiba site (http://it.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/vista_drivers.jsp?service=IT).
  BIOS version is now 2.20 - WIN32

  After the installation of the operating system, I started to install different drivers and utilities to download them from the Toshiba site.

  When I try to install the "utility supervisor password" Setup fails with a box of message that says "serial number is not valid.
  Same problem with a different Installer: "utility of Support Flash Cards.

  Someone knows how to solve this problem and what serial number is not valid?

  Thanks in advance,

  mme000

  Hello Hana

  If someone has to take care of the warning, it's Microsoft. They offer something new and they know with certainty that he could have different negative influence on the operating system running well.

  Toshiba may just try to react and change has tools and utilities, but it's not easy. you will see that soon or later Toshiba will offer updates for all non-working stuff. The same is with WXP SP2.

  By the way: interesting Toshiba on Vista SP1 - http://aps2.toshiba-tro.de/kb0/TSB84026M0000R01.htm article

  Good bye

• Satellite A100: question about Toshiba HW Setup utility

  When I try to activate the HW setup, a message is displayed with the message: Gemeinsame Module was finished.
  I thought that a program would guide me through Setup of HW as described in the Toshiba Benutzerhandbuch.

  I wanted to really make are:
  1. I need to plug a second monitor on my laptop today in the evening.
  2. when I hit Fn + F5, my screen goes black. Press Fn + F5 again: screen is normally activated.
  I was expecting to see a box where I can choose the configuration of the monitor. (This happened in the past).
  3. in order to check my settings, as I wanted to use HW to install as described in the Toshiba Benutzerhandbuch.
  Result: See above.
  Can you help me please?

  Post edited by: Smiley

  Hello

  I put t know exactly what it is the sense of shared module, but perhaps that it s often resorted to the module.
  This application is necessary for the good state of different tools of Toshiba.
  In this case, I would recommend reinstallation of this application.

• Windows 7 Setup utility

  After installing a new game, the configuration utility starts and then says that it is a problem and has to stop. Can't install and run all games on windows 7

  Bruiser5,
  You must use The Windows Installer Cleanup utility to uninstall the game.  You can also run System File Checker.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.