Wrap the book with ready and buy permission

Similar Questions

• I am creating a book with iphoto and to insert a map with the locations, I realized, I could add the card, but not the location when I go in option

  I have created a book with iphoto and that you have inserted a card. I can't add the cities that I visited when I option

  Can someone help me

  Thank you

  What card theme you are using?  And what version of iPhoto?  Your internet connection is working?

  In iPhoto 9.6.1, you can add a location in layout mode.  Zoom in on the map and ctrl - click the location on the map, and then select 'Add Place '.

  In mode 'Options', you should be able to press the button "+" and type a name for the place. The location search pictures by name. You can also ctrl - click on the map and add the location manually.

  What happens when you try to add a place? You get an error message?

• Cannot access the disk in the drive E:, please make sure that the drive is ready and the disk is not write protected.

  When I try to backup Quicken, I received the error: cannot access the disk in the drive E:, please make sure that the drive is ready and the disk is not write protected.  My last backup of Quicken was 16/07/2010.  I don't know why I can't back up now.  Is there a way to fix this?

  Why not save to a folder on your hard drive and burn them to a CD - R from there? I can't tell from the little you wrote if the problem is with Quicken (not work or you have incorrectly backup location) or with your CD - RW drive. How about more details to work with? This will give you an idea of what to write:

  The first Question of troubleshooting: If the problem is new, what has changed between the time things worked and the time they do not have?

  http://www.elephantboycomputers.com/page2.html#Tech_Support - See the article "how to write a Post.
  http://support.microsoft.com/default.aspx/kb/555375 - how to ask a Question

  MS - MVP - Elephant Boy computers - don't panic!

• Hi, how do I change the orientation of the page with headers and footers for facing pages

  Hello

  How to change the orientation of the page with headers and footers for facing pages in CS5

  Turning the page is only for the formatting of data - the page is not literally transformed for printing.

  In most print even if the pages of a book are enabled for the landscape, the header and the footer are still in the same position.

  If you need pages in landscape mode with headers and footers in a different location - you need to do these pages in the section "Master Pages" of the Pages panel

  Then apply these new Master Pages to the pages in your document.

  http://helpx.Adobe.com/InDesign/using/master-pages.html

  Note - it is not usual to have a different orientation for the headers and footers.

• I can ONLY connect to the internet with IE7 and Outlook Express

  I have Win XP SP3, home wired network, Netgear router, cable internet, Lenovo desktop.
  I can run IE 7 and Outlook Express and connect to the internet very well with these.  However, I can not connect using FireFox.  Windows Update returns an error and does NOT connect to scan my computer and display the necessary updates.  I just installed tax program this year HR CD block and it is unable to connect to internet to download the updates.  I used IE7 to go to the web site of the tax program to download the update manually, but it doesn't connect either.  I also can't complete installation OF Adobe (Digital Editions) program because it must connect to the internet in order to make a registration.

  I have disabled the Windows Firewall, do not have a configured proxy.  So, I can browse the internet with IE7 and get email with Outlook express.  I went on the site from Google Chrome to try to download it and install it that (using IE7 of course), but after I press the "Download" button, IE7 says that it cannot connect to perform the download.

  I scanned this forum and not seen similar symptoms that would allow me to reach a solution.  Everyone knows about this issue and how to resolve?

  P.S. I have two other laptops Win XP which CAN completely connect to internet with IE and Firefox via the same router and the modem cable.

  I tried trojan remover and none of the things in the menu utils found any problems.

  But it turns out that my problem was a hidden/partial copy of Symantec Client Firewall that I thought was deleted.  Over the months some programs had been updated and Symantec didn't know about them, so it was blocking their access: FROM Adobe, HR Block, IE8, Firefox, etc.  Given that I have not seen it listed in the start menu and it was not listed in Add/Remove Programs, I didn't have to try to remove it.  And it was not poping up to tell me of a new program attempts to access the Internet.

  I used the Symantec tool to remove all THE stuff of Symantec and it cleared up my connection problems.  I then reinstalled Symantec Client Security (antivirus and firewall) and turned off the Windows Firewall.

• Hello friends, I have a license with terms of the photo with Photoshop and Lightroom applications installed on my iMac. Question: With this license can I install these applications also in my notebook? Using the same license.

  Hello friends, I have a license with terms of the photo with Photoshop and Lightroom applications installed on my iMac. Question: With this license can I install these applications also in my notebook? Using the same license.

  Yes, individual licenses, ranging up to allow two simultaneous, activations facilities.

  subscriptions allow mounting on an unlimited number of computers.  connection is limited to a maximum of two computers at a time.

• To get a trial free Adobe Photoshop Lightroom CC TRY (install) times the CC with Lightroom and Photoshop CC or just Lightroom CC?

  To get a trial free Adobe Photoshop Lightroom CC TRY (install) times the CC with Lightroom and Photoshop CC or just Lightroom CC? I installed only the Lightrrom CC and when I opened it up it reads 'Adobe Photoshop Lightroom CC' but I think I should TRY (install) the CC of Photoshop?

  OK, the plan of photography includes photoshop and photoshop lightroom.

• My site shows and works fine in Chrome and Firefox. It is exactly the opposite with Safari and Internet Explorer.

  In safari, the site takes as much time to load and once loaded, the police of the web that I used is replaced by a defect in safari, I guess. My video background takes a longer time to load once the site is loading. In internet explore, my site simply doesn't show as expected. I have 5 guides to navigation on the right side of the site, but about 11 are displayed. The artist's statement is not displayed in the bio section. Here's the url... leecatarts.businesscatalyst.com

  Please, any suggestions would be great!

  I think that you have solved the problem I checked the site with Safari and IE, but was not able to display the same behavior as mentioned. The site works very well.

  Thank you

  Sanjit

• Why the books are grouped and preinstalled with the operating system?

  It's complaints

  My Portege has Windwosw Vista. I didn't want to buy Vista, but they were only selling with him and no other choice was possible to purchase.

  First of all, my laptop had problems to install Windows updates. I could not connect my institution's Internet System. I had to reinstall the system again.
  It's a waste of time!

  After re-installation of the button for the sound on the outside Panel does not work correctly.

  Also, when I try to stop the laptop sometimes it restarts itself - he doesn't stop!

  Secondly, I had a problem with the laptop, when an opportunity to visit a well-known site, it serves to block itself.
  Once, when he is blocked, I had to restart and its screen remained black. They took for repair. It was delivered later - repaired, but with a defect on the screen!
  What a... workers!

  When I bought this laptop he had an offer with the update of Vista with Windows 7 after their release.
  Wonderful. But just note, Toshiba has the highest price of the offer, compared to its competitors - 30 (or £) against 15 for others, which of course I'm not going to pay.

  I already paid for Vista, which is incredible, and I knew, but I had not choice not to buy!

  All right, so there is still competition in the market, several possibilities are present - install Windows cracked, switch to Linux or just buy an Apple!

  Please, take this comment seriously! And please, stop with group buying, no matter what the benefit is. It won't work for long.

  Hi mate

  Fact is that most of the laptop manufacturers sell the computer and laptop computer with a preinstalled operating system. So I wouldn't blame Toshiba or other brands for which

  You get a new computer/laptop with a new OS.
  During the past 20 years, Microsoft released 3.0 Win, Win 95, Win 98, Win NT, W2k, Win XP, Win ME, Vista and Win 7, I remember that all my computers or laptops were grouped with these operating systems

  Toshiba offers the notebook with a clean image and you can also create a recovery disk (so don t need to buy anything if you need t n)
  Of course, each of us can install a clean OS, but there are a lot of people who are happy with such image pre-installed because everything is pre-installed and configured.

  Many people have no knowledge of computer wide and are really recognizing that everything is pre-installed and the configuration does not have a lot of time

  With regard to the question of the laptop;
  What to say; you had a bad luck that something was wrong with the laptop. This can still happen that my new LCD TV other manufacturer, was dead after two weeks, I called ASP, then replaced the screen now is ok

• Structure of the event with gray and disabled controls

  I'm working on a data acquisition program that uses the structure of the event to manage the graphic user interface.  I have a 'start logging' button that raises an event when the value changes and starts to collect data.  While collecting data, the program disables and gray on all controls on the front panel except the button "stop logging" that ends a while loop with in the event of data logging.  If this event is active only when you press "stop recording."  There are other events that are triggered by a mouse up/down, action others controls disabled on the front panel.  The problem is that, while the program collect data if you click on one controls disabled and gray that has a mouse up/down, event, the program seems to hang and will not push the button ' stop logging.  I don't know if his attempts to run another event, but he continues to logging data, I just can't stop it.  I have to use the Cancel button to stop the program.

  The real problem is that a control, even when disabled and grayed out, can still trigger a mouse to the high-low event - controlled, it true?  Also, what happens if an event is raised during execution, another event my understanding was that a single event can run at a time.

  Thank you

  Doug

  Doug,

  By reading between the lines, here a bit...  Looks like you have your data collection and logging code in the box to Start Logging event.  If so, this is part of the problem.  No other case of event cannot run until this one is over.  Move data collection and the registration code to a parallel loop.  Have this loop to sit in an inactive state until you press the Start Logging button.  Then, in case for the button change send a command via a queue to the loop of logging and out the case of the event.  The event loop is then immediately ready to respond to the next event.

  Generally the code within a case of event should run quickly, no more than 10s of milliseconds for maybe 100 ms to avoid slow response to another event.

  Look at the producer/consumer (events) design pattern which comes with LV for an example.

  Lynn

• Connect the TV (with sound) and monitor for Optiplex 390

  Here is my system info:

  OptiPlex 390 small footprint

  Windows 7 64 bit

  Intel Chipset H61

  Intel HD 2000 (with HDMI and VGA) graphics card

  Map of AMD Radeon 6350 512 MB video (with 2 DVI splitter)

  I need to connect 1) HD TV with the sound via HDMI and 2) monitor via VGA to this system (no sound).  I did a lot of research on the Internet but can't find a definitive answer if my system will support both views.  Can anyone confirm if one of the three options below does not work, or any other ideas?

  Option 1: remove AMD card, connect the HDMI TV, connect the VGA monitor.  I've seen conflicting information if the HDMI and VGA ports can be connected at the same time.

  Option 2: Connect TV: dispatcher--> DVI HDMI adapter DVI-->--> TV, monitor connect a HDMI cable: dispatcher DVI DVI VGA adapter--> monitor-->.  It should work, but if someone can confirm if the AMD Radeon 6350 supports audio through DVI to TV?

  3rd possibility: buy another video with HDMI and VGA card.  I'd rather not spend more money... I have six systems to connect!

  Thank you in advance for your help!

  Hi Ozone72,

  Intel HD Graphics 2000 which was shipped with OptiPlex 390 supports two independent screens. Which means that you can connect TV for VGA and HDMI monitor, so that AMD card must be removed from the computer.

  Please try it and return back if it worked.

• Urgent! InDesign CC, problems of placement of the image with Mac and Windows

  Hello

  When I tried to place an image or move pages in another file, indesign gives the following error.

  "The file does not exist, you may not, or the file is perhaps currently in use"

  I tried renaming the file, copy the file or re-edit the images... Nothing has worked... I am convinced that this is a problem with the mac and windows integration...

  How can I transfer files without problem from the Mac to the PC or vice versa.

  already solved...
  Mac OS permission issues.
  Adobe customer service solved the problem

  For more explanations and for your understanding...

  1. I create a template for my colleagues to work under Windows. Give them the files with a flash drive.

  2 employees were working on Mac...
  3. I took the model in a flash drive and tried to place some pictures...

  4 indesign gives me an error saying "the file does not exist, you may not, or the file may be in use by another application."
  5. I tried to recreate a link to images in document thinking "Okay maybe." it's a problem of link

  6 indesign gives me an error saying "the file does not exist, you may not, or the file may be in use by another application."

  7. I have tried to move the pages in the document to another, think "might be that I can work around this problem.
  8 indesign gives me an error saying "the file does not exist, you may not, or the file may be in use by another application."

  9. I tried to place another image to another folder

  10 indesign gives me an error saying "the file does not exist, you may not, or the file may be in use by another application."

  11. I tried to rename the file and after that the evolution of the file

  12 indesign gives me an error saying "the file does not exist, you may not, or the file may be in use by another application."

  I guess that this time there is no confussion in your mind...

  to cut the story short, it's a problem generated by authorization on Mac problems. It is resolved by defining the whole Adobe preferences folder and its contents to be read/write, not just read-only.
  In Mac OS: [Drive] /Users/ [username] / Library/Preferences/Adobe
  In Windows [drive] \Users\ [username] \AppData\Roaming\Adobe

  also after you change these files for read/write, you must copy the files you worked on once again.

  Thanks for your attention...

• I see the book. SetProps() and doc. SetProps() crash FrameMaker 11 times and 12.

  I try to put the PDFDocInfo at the level of the book and the doc.

  I can get the active book, get her propellers and read and write in the PDFDocInfo. When I add the book. SetProps (accessories); for the code, it blocks FrameMaker 11 or 12.

  I tried to only:

  Book of var = app. ActiveBook;

  var = accessories book. GetProps ();

  book. SetProps (accessories);

  The simplest case possible and even with the doc, it still crashes.

  Has anyone else seen elsewhere?

  Kind regards

  Stuart

  Stuart,

  I usually see the same behavior, except that FM does not crash, it just hangs and I have to kill it with Task Manager.

  So, I don't know what to tell you on SetProps(). Looks like a bug. Can you just set the property directly? As:

  var docInfo = new Array (0);

  docInfo.push ("some_string");

  docInfo.push ("some_other_string");

  Book of var = app. ActiveBook;

  book. PDFDocInfo = docInfo;

  Russ

• Rewrite the query with joins, and group by

  Hello
  
  It's an interview question.
  
  Table names: bookshelf_checkout
  virtual library
  
  And the join condition between these two tables is title
  
  We need to rewrite under request without using the join condition and group by clause?
  
  

  SELECT b.title,max(bc.returned_date - bc.checkout_date) "Most Days Out"
             FROM bookshelf_checkout bc,bookshelf b
             WHERE bc.title(+)=b.title
             GROUP BY b.title;

  When I was in College, I read most of SELECT statements can be replaced by operations base SQL (DEFINE the OPERATORS). Now, I am rewriting the query with SET operators, but not able to get the exact result.
  
  Kindly help me on this.
  
  Thank you
  Suri

  Something like that?

    1  WITH books AS (
    2  SELECT 'title 1' title FROM dual UNION ALL
    3  SELECT 'title 2' FROM dual UNION ALL
    4  SELECT 'title 3' FROM dual ),
    5  bookshelf AS (
    6  SELECT 'title 1' title, DATE '2012-05-01' checkout_date, DATE '2012-05-15' returned_date FROM dual UNION ALL
    7  SELECT 'title 1' title, DATE '2012-05-16' checkout_date, DATE '2012-05-20' returned_date FROM dual UNION ALL
    8  SELECT 'title 2' title, DATE '2012-04-01' checkout_date, DATE '2012-05-15' returned_date FROM dual )
    9  SELECT bs.title, MAX(bs.returned_date - bs.checkout_date) OVER (PARTITION BY title) FROM bookshelf bs
   10  UNION
   11  (SELECT b.title, NULL FROM books b
   12  MINUS
   13* SELECT bs.title, NULL FROM bookshelf bs)
  SQL> /
  
  TITLE   MAX(BS.RETURNED_DATE-BS.CHECKOUT_DATE)OVER(PARTITIONBYTITLE)
  ------- ------------------------------------------------------------
  title 1                                                           14
  title 2                                                           44
  title 3
  

  Lukasz

• Rotation of the screen with Automator and a script

  I have no knowledge whatsoever about scripts, coding or automator. I continue to read discussions about the issue, but I don't understand them. It would be a great help for me if someone please explain how to create a kind of keyboard shortcut that changed the rotation of the screen (the own macbook screen, not an external) using automator and a script on a Macbook Air running OS X El Capitan 10.11.2.

  Is this possible?

  Thank you in advance.

  One option is to use the utility command line fb - turn in Automator service and assign a keyboard shortcut. Download the GitHub source fb-rotation, compilation, following the indications on GitHub and output the binary to usr; or download a binary compiled and move to usr/local/bin.

  Create an Automator service, set the options "Service receives no entry in any application", add an action to run the Shell Script and set the options as "Shell: / bin/bash ', ' Pass entry: to stdin.  Type the command rotation fb for the desired degree of orientation of the screen such as ' / usr/local/bin/fb-rotation - d 0 - r 180 ' 180 ° on the main screen. Register the service under a name.

  

  Go to  > System Preferences > keyboard > shortcuts > Services. Highlight the service you created, select it, click "none" and create a shortcut using a unique combination of keys. Create separate services of Automator for the additional screen orientations. Quit the system preferences when you are finished.

  

  Tested with OS X 10.10.5 Yosemite and El Capitan 10.11.3