Write a date legal Script

Similar Questions

• write class data

  Hello

  I am looking for a solution to write a programming data to a class of LabVIEW.
  I want to create a method that reads an ini file and writes the data of the keys in the class data during execution. The method must be flexible. So I don't want to code for key cases.
  With the normal clusters I would do that with vi server. I have not found a way to do this with the classes.

  I hope someone has a solution for this.

  Thanks in advance.
  D. Ackermann

  
  

• Help with a date field script

  Sorry if this is a repeat. I was interrupted and found that my browser crashed when I'm new so I don't know if the question arises.

  I need a script for a date (mm/dd/yyyy) field where the user can fill only a date that is between 12/31/1899 and the current date (no matter what the date when the form is open). I'm getting to write this but I could not with this one. Any help would be greatly appreciated.

  Thank you!

  I have a feeling that I already answered this question some time ago... Anyway, you can use this code as a script custom validation of the field:

  var minDate = util.scand("mm/dd/yyyy", "12/31/1899");
  var maxDate = new Date();
  event.rc = true;
  if (event.value) {
      var d = util.scand("mm/dd/yyyy", event.value);
      if (dmaxDate) {
          app.alert("Error! The entered date must be between " + util.printd("mm/dd/yyyy", minDate) + " and " + util.printd("mm/dd/yyyy", maxDate));
          event.rc = false;
      }
  }
  

• Other legal scripting languages?

  According to this post on the stack overflow, it is not legal to InDesign scripting using scripting like ruby other languages.

  http://StackOverflow.com/a/7401629/1177119

  Does anyone know the documentation that he speaks? It seems to me that it should be legal otherwise, no one would be able to develop plug-ins for InDesign.

  It simply means that it is illegal to debone the InDesign file format and then write a program using this knowledge for editing InDesign files. He doesn't have to scripts.

  I think it's close to true, but not with exact precision.

  The EULA prohibited InDesign the InDesign reverse engineering software, see section 4.4:

  4. restrictions and requirements
  ...
  4.4 no reverse engineering. You will not reverse engineer, decompile, disassemble or trying to discover the source code of the software.

  But I do not think that the reverse engineering the violates this restriction, as long as the is not inverted designed as part of this process.

  Functionally, it doesn't matter because the format file to this degree of reverse engineering is a Herculean task and there are better ways. As he passes to note.

• Write the Date/time value to a Ms Access table

  I have a headache. Here is the statement I send and the error I get:

  INSERT INTO VALUES (TestID, DateTime) measure (8732, #' 2015 - 01 - 28 16:17:58 ' #);

  NI_Database_API.lvlib:conn Execute.vi-> 2.vi Untitled-> Untitled 1. VIADO error: 0x80040E14
  Exception occurred in the Microsoft JET Database Engine: syntax error in INSERT INTO statement. in NI_Database_API.lvlib:Conn Execute.vi-> 2.vi-> vi Untitled 1 Untitled.

  I tried most of the possible combinations of #, "," around the datetime string and I also tried datetime string formats YYYY/MM/DD hh: mmS AM/PM, DD/MM/YYYY "

  In writing to the other data fields don't cause any error, I only get the syntax error when I try to write in the DateTime field (data type Date/Type)

  I use LV2012 with database connectivity kit and MS Access 2010 (stuck with it, cannot be changed). Same problem with the connection of the user DSN or UDL (jet engine).

  It works with the DB tools Insert Data.vi but we want to use a direct INSERT statement using the DB tools run Query.vi, because we have had a few locks error 0 x 80004005 which can be caused by the DB tools Insert Data.vi using ADODB. Recordset.

  Is attached the vi that I use for debugging.

  Ben64

  Finally found the problem!

  Even if the data type is Date/time in Access, and it is possible to define the name of the DateTime field it seems to be a small Word when you use a SQL statement. The solution is to add DateTime hooks like this:

  INSERT the EXTENT (TestID, [DateTime]) VALUES (1,'2015-01-28 06:52:16 ');

  Thanks for your help Cosworth.

  Ben64

• Write the data from multiple devices in columns

  Hi, I have a problem in writing the data of 2 devices I have currently (for pressure and temperature). I wanted to be written in 2 coloums, one for temperature and pressure for each produced data. What I have now is that the data written in the rows. Please help me on this.

  Also, I put the timestamp, but only time as hh/mm/ss data. would it be possible to produce both as in the graph, which is written as hh/mm/Scott (in microseconds)

  I have attached my labview program, and also the current save file I receive, and format also required that I really want.

  Thank you

  Hello

  1 use a function table 2D transposes, before you write the table of function "spreadsheet table.

  2. use the format of the exact time in the string of Format date/time function. Use the assistance provided for this function to get the date and time format you need

  3. the wiring is not good. Your 'open file' function is placed somewhere after writing in the file structure. follow the flow of data.

  Tips: you can consize your block diagram and place your functions and blocks in order, wire the neater.

• How to write Modbus data in a file or a matrix?

  Hello:

  I can monitor my data through RS-485 port using 'Master Series MB query', and successfully, I can show signals using the waveform.

  But I can't save the data during the test in a table or write to a file. (see attachment and picture)

  How can I write them to a file or a spreadsheet correctly?

  When I try to read 'file as' and this graph, I can not every graph, there simply a knot!

  is the data type "registers entry" needs a special procedure?

  What is the problem?

  Thank you.

  A fundamental flaw that I see is that you have to write file as configured to rename and replace any existing file when you call the function.

• Can I choose when I want to write my data in a file?

  What I want is like,
  When I click a button as ON the then only will it a written data in a spreadsheet.

  Now, I did the bolllean so that it displays TRUE when you need to write... but if FALSE, nothing happens...
  and I don't see any option in writing to the spread for that worksheet function it...
  If you can help me on what I do

  ?

  You're writing the worksheet file in a case structure.

  I recommend you watch the LabVIEW tutorials online
  LabVIEW Introduction course - 3 hours
  LabVIEW Introduction course - 6 hours

• How to write the Date/time of the PDM file property

  On the page root of the PDM file, there is a predefined, property called ' Date/Time' in the first row.

  I would use it to save the timestamp when the tdms file is created. But in the help file.

  I find that the following property constant. So, how can I write to the field of property ' Date/time '?

  Property	Constant	Data type
  Name	TDMS_FILE_NAME	String (char *)
  Description	TDMS_FILE_DESCRIPTION	String (char *)
  Title	TDMS_FILE_TITLE	String (char *)
  Author	TDMS_FILE_AUTHOR	String (char *)

  Thanks for any idea or suggestion.

  You are not sure if it's exactly what you want, but have you tried that?

  CVIAbsoluteTime            CVItime, *t = NULL;
  TDMSFileHandle          deH = 0;
  
  // Create TDMS file and set some properties
  errChk (TDMS_CreateFileEx (file, TDMS_Streaming2_0, TDMS_ByteOrderNative, 0,"example.tdm", "someText", "title", "author", &deH));
  
  // ...
  
  GetCurrentCVIAbsoluteTime (&CVItime);
  errChk (TDMS_SetFileProperty (deH, "Date/Time", TDMS_Timestamp, CVItime));
  
  // ...
  
  // Save and close fileerrChk (TDMS_SaveFile (deH));TDMS_CloseFile (deH);
  

• How can I write the data on the graph xy

  I want to write the values of x and y... how can do that... I tried with the independent cluster.but the sons weren't told connected.it that the dimensions are not same.why my watch 3 xy dimenssional table? He must have a 2d painting.

  can someone help me please...

  Ignatius

  Normal, 'Write on worksheet File.vi' required a simple table 1 d or 2D as input and not a specific type in the cluster (because the XY graph is a cluster).

  So, given that your [X] data is the same for every [Y], you could build a 2D data table to use (by implementing the 'build picture' with [X] & [Y]).

  

  If it is not the case (same [X] for all [Y]), you will have to proceed to another method-online 2 files or the conversion of custom text before writing.

• not able to write the data through data acquisition

  Hello

  In fact, I need to send a code word (text file) from the program matlab through my data acquisition (OR-USB-6215). my program (transmitter.vi [case structure: page2]) attached below has a problem to do the task. whenever I run the program it gives me an error like

  Error-200479 occurred at DAQmx start Task.vi:2

  Possible reasons:

  Measurements: Specified Operation cannot be performed during execution of the task.

  Task name: _unnamedTask<84>

  At the moment I don't see output in my oscilloscope. But, if I highlight my performance I observe my samples on the oscilloscope with the following error message

  200288 error has occurred in the DAQmx write (analog 1-d 1Chan NSamp DBL) .vi:3
  Possible reasons:

  Measurements: Attempted to write a sample beyond the final sample generated. The build is stopped, so the sample specified by the combination of the position and the offset is never available.

  Hi Raja,

  What I did is I moved the 'write DAQmx' outside the while loop. That made the VI in this case is read the file and passing it to a table, and then this table is formatted a waveform to be written to the data acquisition device.

  With respect to the way in which the data is read, I don't change anything, it was based on your original code. A good way to know if you write the correct data is to check the chart view in VI.

  So the question is, is the graphic display showing the good waveform?

  Best regards

  Faris

• Step in E9 program to write the data of the card field to contact Field?

  Is there a program in E9 step that allows you to write data of a contact card in a field on the contact?

  Question: What is the purpose?

  E9 you can merge the CDO data in emails using mergers to field (E10 is only event field data).  You can trigger the email with the program generator or services data card (use of the services to be added to a program)

  If this isn't the case, have you looked into using the mapping in E9? Since CDO details screen > data card game Menu > field mapping

• Add/change the columns of data type (scripting)

  Hello

  I am writing a script to add default columns and their values in tables. So far, for me, it is possible to add columns to an existing table in the model.

  Then, I want to add value to the data type. I discovered there is a method called getDataType(). So far, I have not found the "setter; for this property.

  Like other scripts, I started by creating a table with columns, and then using the API to read the values.

  A simplified version of my code:

  get the columns of table

  myTab var = model.getTableSet () .getByName ("T_POSITIONS");

  colArray = myTab.getElementsCollection () .toArray ();

  loop through columns

  for (i = 0; i < colArray.length; i ++) {}

  the type of var data = colArray [i] .getDataType ();

  model.getAppView () .log (colArray [i] + "a datatype" + dataType);

  colArray [i] .setDataType ("VARCHAR2 (1)");

  }

  An error occurs when I want to run this script: could not find setDataType function in the object ID.

  I can't find the right method to add/change the datatype property.

  Any information would be appreciated.

  Hi Bart,.

  Here's what's in the column in the XML file:

  
  FDB11R21
  EMPLOYEES
  FIRST_NAME
  
  2015-01-13 12:45:08 UTC
  First name of the employee. A not null column.
  HR_870
  true
  false
  1
  LOGDT024
  20 BYTE
  false
  
  

  20 BYTES

  If you need set the size in "20 BYTE" or "20 CHAR".

  Philippe

• Essbase data backup script

  So I a. The MSH, with the following basic information file, where if I schedule this task, I will get a backup of data for the date file this script has been planned and in the next race, the same name of file to the backup.

  I would like to be able to get this script to save the backup based on the date it has been executed and produce a new backup file based on the date of each subsequent executions.

  Someone at - it something like that they would like to share with us?

  echo "- INITIALIZE ROUTINE -";

  echo "this script can be run every night to perform backups of data export of Essbase;

  echo "Begin recording in the backup log file ';

  spool to DataBackup_AllApps_Log.log;

  ECHO "";

  echo "- PERFORM REQUEST LOGIN -";

  echo "log on to the server by using the: userid, password and server name"; "

  login password admin on hyperionserver;

  ECHO "";

  echo '- LOG OUT ACTIVE server SESSIONS -';

  echo "commands of disconnection from the current system of execution... » ;

  ALTER system disconnect session force them all;

  ALTER database Demo.Basic unlock all objects;

  Change the system asks to kill all them.

  echo 'Objects unlock complete on server';

  ECHO "";

  echo '- EXPORT ESSBASE DATA BACKUP -';

  echo "Running export orders Database...". » ;

  export data from database demo.basic Level0 to data_file 'C:/Oracle/Administration/DataBackup/DataBackup_Demo_Basic_File.txt ';

  echo "Completed data backup export";

  ECHO "";

  echo "- TERMINATE ROUTINE -";

  spool off;

  "exit";

  Hello

  Before start using script Hari add below lines

  echo off

  @REM * SETTINGS *.

  @call D:\back\Backup.bat

  Set year = % date: ~ 10, 4%

  Set day = % date: ~ 7, 2%

  Set months = % date: ~ 4, 2%

  define a day = %% months %% % of the year

  hh = % time: ~ 0, 2%

  mm = % time: ~ 3, 2%

  the value of ss = % time: ~ 6, 2%

  the value t = % hh % mm % ss %

  essmsh %filepath%Backup.mxl % essuser % esspwd % esssvr %%%d % tm dt

  Rename 'D:\back\security.txt' 'D:\back\security%d%_%t%.txt '.

  Rename 'D:\back\alldata.txt' 'D:\back\alldata%d%_%t%.txt '.

  Backup.bat

  spool to 'D:/bck/EssbaseArchive.log ';

  Set timestamp

  connection $essuser $esspwd on $esssvr;

  poster session;

  change the system asks to kill all them.

  alter system disconnect session any force;

  export database $essApp. $essDB all data to the server data_file 'D:\back\alldata.txt ';

  security_file export of data_file 'D:\back\security.txt ';

  change the $essApp database. $essDB force archive in the folder "d:/bck/sample.arc".

  change the $essApp database. end of $essDB archives;

  spool off;

  disconnection;

  "exit";

  So that it will be not any replacement of the existing backup files, remember you will have to go for some activities of housekeeping that it could consume space.

  If _1, _2 files because although I mean more than 2 GB of data, then you may need to modify the script to rename all the files in the directory using a loop for.

  Thank you

  Amith

• Date format script

  Hi guys,.

  I need a script that the date format gains 5 virtual machines, the output of the script must be in HTML for the vcops.

  Thank you

  Itay

  Something like this should do the trick.

  $vmNames = "VM1","VM2","VM3","VM4","VM5"$username = "Administrator"$pswd = "MyPassword"$script = '(Get-Culture).DateTimeFormat.ShortDatePattern'
  
  $pswdSecure = ConvertTo-SecureString -String $pswd -AsPlainText -Force$cred = New-Object -TypeName System.Management.Automation.PSCredential -ArgumentList $username,$pswdSecure
  
  Get-VM -Name $vmNames | %{    New-Object PSObject -Property @{        VM = $_.Name        DateFormat = (Invoke-VMScript -VM $_ -ScriptText $script -GuestCredential $cred).ScriptOutput.TrimEnd("`n")    }} |Export-Csv c:\report.csv -NoTypeInformation -UseCulture