write a graph in a cluster using a refnum does not?
Hi all
A little bit of a weird (I think). I'm trying to update a table that is in a cluster using a refnum.
See the attached example, Boolean updates correctly, but not the graph (above). Y at - it something I'm doing wrong or can graphics simply can't be updated in this way?
With the help of LV 8.6 in Win XP (SP3).
Ideas?
PNR
It does not work. You must remove the reference for the cluster chart and update it in this way. See attached mod.
Tags: NI Software
Similar Questions
-
Someone in the building uses Apple can 790-795 network this person hack me and who is? Berlin writes. Very often, I notice that my network does not work as it should. Thank you. I'm really not sure if it's true that Apple can´t be hackend? First because I use Google and Google mail on the same computer.
Someone in the building uses Apple can 790-795 network this person hack me and who is?
Wi - Fi networks will be displayed in the menu OS X Wi - Fi, including those created by other Apple routers. It's normal. It does not necessarily indicate that users connected to these networks can connect to yours. In particular, if you use a wireless password and change it often.
-
In numbers, I can't use then ' / ' operator to divide 2 cell, when I use Shft + 7 does not appear "/", appear ' + '.
Apple saw fit to replace the ' / ' with the Obelus ("÷") that often resembles a plus. Look very carefully and you will see the point above and below the line.
Also if you look at the result, 6/3 is 2 step 8 if the operator acted as the addition operator
-
The difficulty it Center Microsoft said that my serial cable using IrDA protocol does not work properly.
Appreciate any suggestions on how to solve this problem.
Steve Stephens, * address email is removed from the privacy *.
Hi, Steve Stephens.
Did you run the fixit available in the link below?
Hardware devices do not work or are not detected in WindowsMethod 1: Check for any error message in Device Manager
When a device is not functioning, Device Manager also typically displays an error message with an error code that comes with it. First, search for errors in the Manager of devices to do this, follow the steps below:
(a) open Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager.
(b) If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
(c) in the Device Manager, find your device, and then double-click the device name.
(d) If an error code has been generated, the code appears in the status area of the device under the general tab
Method 2: download and install all available Windows UpdateInstall Windows updates
http://Windows.Microsoft.com/en-us/Windows-Vista/install-Windows-updatesMethod 3: Download and install SP2
Learn how to install Windows Vista Service Pack 2 (SP2)
http://Windows.Microsoft.com/en-us/Windows-Vista/learn-how-to-install-Windows-Vista-Service-Pack-2-SP2 -
If I buy a used PC that does not have an operating system or OS disc, still has the label of license for windows can download Microsoft windows?
N ° you must contact the manufacturer of the computer and asking for a disc of recovery/reinstallation of Windows. Carey Frisch
-
Cluster of Boolean controls does not expect update
Hello
I'm confused about the following question: in the joint Test Cluster of Boolean controls Functionality.vi, I have a Boolean controls group, some disabled and grayed out, other permits. If I click on one of two Boolean controls permits, and then on the other hand, I want the Boolean selected first control to False. Update Cluster indicator shows the desired behavior. What confuses me, is that the new value does not update accordingly. When I clicked at least once on two Boolean values, the new value remains [TRUE, TRUE] at all times, and the structure of the event runs.
I have a work around, as shown in the Test Cluster of Boolean controls feature Workaround.vi, but it looks like 'Nice' no, because it's more complicated than necessary. Anyone know why the new value refreshes as expected? Please notify. Thank you.
Best regards
Peter
Here is a simple solution.
Of course, you can use a container of radiobutton instead of a cluster for simpler code. Try it!
-
Vista Basic with dial-up. I reinstalled vista and now the modem will not work with any of the numbers given by my provider. He throws error numbers (Sorry didn't write them) and said that the modem is already current usage or other computer is busy. The modem does not appear in the lists of material and reinstallation does not work. The computer does not recognize when a new modem is installed either. I use the same drivers provided with the computer when I got it.
Hello
I suggest to refer to this link and follow the instructions in the link below and check, if this can help:
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-modem-problems
It will be useful.
-
Script using AppleScript GUI does not
Before we go too complicated, I'm starting to get a basic copy/paste using keyboard shortcuts to work. In theory, if I can copy a value of cells in another cell using keyboard shortcuts, I can use keyboard shortcuts, I need more complex scripts.
Can someone more well informed that I look over the below basic code and tell me what I'm doing wrong?
(I added the script editor to the security settings for accessibility to allow him to control the computer.)
My code for a simple copy/paste in figures (other programs also not to answer):
on run
say application "Numbers".
activate
if not (there are document 1) then error number 1000
say document 1
tell the worksheet active
the value the selectedtable to (the first table whose class of selection range is range)
the value myRows to count the lines in selectedtable
say selectedtable
the value the selection range of cell 2 of rank 3
sendCopy
the value the selection range of cell 4 of rank 3
sendPaste
end say
end say
end say
end say
end run
on sendCopy()
say application 'Numbers' to Activate
say application "System events".
say application process "Numbers".
key sequence « C »
end say
e nd dire
end sendCopy
on sendPaste()
say application 'Numbers' to Activate
say application "System events".
say application process "Numbers".
key sequence « V »
end say
end say
end sendPaste
Thank you
Jason
You favorite the AppleScript Language Guideand then use the appropriate syntax:
key sequence Using 'C' command down
key sequence 'V' with the command down
It may or may not be other contributory factors in your script as to why it does not work.
-
using the do does not track will be my lojack still be able to find my location if stolen pc
I followed by avg if pc is stollen by using the do not follow foxfire will be I have problems with avg to find my pc if stollen
Hello Kime34759,
Please contact the Mozilla Support. I'm not familiar with the Lojack of AVG software, but in looking at the site here , their tracking software is at the level of the bios and does not track of browser use.
For more information please visit the site of the products mentioned above.
See you soon,.
Patrick -
Tecra A7: After using Record now does not close properly
Hello
I have a problem with recordnow software on my new laptop Tecra A7. It does not close after that I have to burn a CD/DVD (recordnow.exe still appears in the Task Manager). It closes correctly when I open only and nothing is burned. The main problem is that I can't access my DVD - RAM drive until the recordnow.exe is closed by the Manager tasks. I tried to reinstall the recordnow software but it does not solve the problem.
I hope that someone will help.
Thank youHello
Thanks a lot for the power supply to the back. This problem is unknown and tells you some very useful information.
Thanks again!
-
My Windows Media does not open upward, when you click on Window Media Player in the list of available programs nor play any internet media using the Media window. I have the 110.6002.18311 version. Any help to fix this problem will be appreciated.
Hello
You can try to re register the dll files for windows media player and if it helps fix your problem. To do this, please follow the steps below:- Click Start, type cmd in the search box and right-click on cmd.exe, and then click Run as administrator.
- At the command prompt, type the following commands and press ENTER after each command:
regsvr32 vbscript.dllregsvr32 jscript.dllregsvr32 wmp.dll -
Windows Fax & scan using Outlook 2007 does not display do not all contacts
This can be a matter of Office 2007. I use Windows Fax Scan & and Outlook 2007. I can't choose a recipient in Outlook 2007 Contacts correctly use in Windows Fax & Scan. When I click the To: button in Windows Fax & Scan I have only three columns displayed. Name, full name, and e-mail address. If the recipient does not have an e-mail address, his name does not appear. Who am I put in wrong place? I don't see an option in Windows Fax & Scan. What is an Outlook setting? Any help would be appreciated.
From: Hal Hostetler
This is probably due to sync Palm/BB and/or the / import export, email addresses don't always 'solve' prevents them underscores when used in address lists. One thing to note for the future is to NEVER use Outlook. PST, import and export functions, they are broken and have been, they lose data and the. PST Import feature usually corrupts the Outlook profile in use at the time. Instead, just make a copy of the current value, by default. PST file when Outlook is closed, take this copy to your new computer, place it in a folder where it will NOT overwrite any existing... PST files, make sure it is not set to read only (which will happen if you use a CD for transfer, then open of in Outlook using ' file |) Open | Outlook data file. " Do drag what you should leave the default copy on your new machine, or set as the default value and continue to use it.
About 900 contacts, see if this clever utility can help with that:
http://www.Chapura.com/downloads_utilities.php
E-mail address utility
Another response of the community of Windows Vista discussion groups
-
problem with my 'in use Catalogue', lightroom does not start!
Hello, I have a problem with my "Catalogue". My laptop battery was empty, he went, once restarted, lightroom does not start... He keeps giving the message that the catalog is already used... I tried to reinstall lightroom, select a new catalog, but these options don't work... Please help me because I can't work now!
Hi liannem,
What version of Lightroom?
With Lr closed go to the location where your catalog (by default it is pictures/Lightroom)
Remove the . Lock file with the same name as your catalog. For example, in the image below, it is Lightroom4 catalog.lrat.lock
In your case, it will be Lightroomcatalog.lrcat.lock(Lightroom6/cc)
Restart Lightroom
Let us know if this helps
~ Assani
-
UCM, RIDC sorting using custom metadata does not work
I'm doing a search using GET_SEARCH_RESULTS and I am trying to sort the results, but unfortunately it does not work. I get this exception:
Unable to retrieve search results. Error occurred while retrying the search query. Error occurred while processing. Unable to return results.
oracle.stellent.ridc.protocol.ServiceException: Unable to retrieve search results. Error occurred while retrying the search query. Error occurred while processing. Unable to return results.at oracle.stellent.ridc.protocol.ServiceResponse.getResponseAsBinder(ServiceResponse.java:142)
at oracle.stellent.ridc.protocol.ServiceResponse.getResponseAsBinder(ServiceResponse.java:108)
to the sample. Connection.main (Connection.Java:661)
The binder is like:
binder.putLocal ("IdcService", "GET_SEARCH_RESULTS");
binder.putLocal ('ResultCount', '10');
binder.putLocal ("QueryText', 'xDocAudvTitle < contains >"togados"');
binder.putLocal ('SortField', 'xDocAudvTitle');
binder.putLocal ("SortOrder", "Asc");
If I do not use the sortField and SortOrder parameter, the query retrieves the correct results.
Any idea on this exception?
Kind regards
Juan Carlos.
Thank you all,.
The problem is that the custom metadata field is of type Memo, both because of its size is not optimizable, so I can't sort by using xDocAudvTitle.
I'm done with the help of another field to sort.
Once again, thank you to you two.
Kind regards
Juan Carlos.
-
Use of excel2collection does not
Hey everybody,
I am trying to download a file in format XLS with APEX; I use the earpiece of the Apex and following the steps I've seen in blogs like that of Spendolini (http://spendolini.blogspot.com.es/2010/02/uploading-xls-files-with-apex-listener.html) and in this forum (https://kr.forums.oracle.com/forums/thread.jspa?threadID=2342792). However, it seems that I get no information in the collection, because I get a message "No data found" after downloading the excel.
I try to check the info from the collection in 3 ways: in debug mode, from the SQL commands (select * from apex_collections) and with a report on the same page where the file browser. In these 3 ways, the result is the same: no data found.
I checked that the demand for the 'Upload' button is "xls2collection", and the lines added in the apex_config.xml are the following:
No matter where these lines are added?<entry key="apex.excel2collection">true</entry> <entry key="apex.excel2collection.onecollection">false</entry>
I use APEX 4.1.1. I'd appreciate any help on this.
Thank you
Elena.Hey Elena,
I am trying to download a file in format XLS with APEX
What version of Excel depends on your file? Note that APEX listener currently can only handle versions prior to 2003.
I checked that the demand for the 'Upload' button is "xls2collection".
Do you have other actions on this page? And what is the target of your item to browse file? (Must be WWV_FLOW_FILES )
No matter where these lines are added?
They should be in the +
+ tag that surrounds the other entries. Despite this, the order does not question, although I got them only after the other entries.
Have you restarted APEX listener after you have added these entries?Could you put the listener APEX out of the newspaper for the attempt to download?
-Udo
Maybe you are looking for
-
I have an iMac 27' 2012 with macOS Sierra and Apple Watch with watch OS 3, I can use the function "Log?" in Apple Watch
-
I can't delete an add we titled "Y U not validating 2013052401".
I have an add on that is called 'Y U not validate 2013052401' which has no button Delete or be able to find help, said troubleshooting techniques in the Help menu. Any suggestions? I don't know what it is!
-
Why that I lose my apps tab and tab groups each time firefox is updating to a new version?
It seems that every time I get a new version of firefox my apps tab and groups disappear. Why this happens and what I can do about it?
-
M1319f: Printing on M1319F
I changed the toner in the printer, but the copy still has a streak of discoloration on the right side of the page. Is there something else I can do?
-
Original title: the status message appears on the start page. Message that appears at startup to the top: the component you are trying to use is on a network containing the installation package "status.msi" in the box below. Click OK to try again or