Write in an exec BACK window already open system

Similar Questions

• 'write on worksheet' VI error: file already open

  I get this error when I write in a CSV file: I save data there permanently... Well, I programmed it stores about 100 points in memory and writes every 100 points.

  When I open the saved file in Notepad for example to preview, Labview returns error "File already open" and so he can't write.

  isn't this weird? aren't you just cached the file when opening information? How can I fix it?

  I use the VI "write on the worksheet.

  Thank you

  Maybe when you get the error, store what you were going to put in this file in memory or a temporary file.  Displays a dialog box that does not stop your program to tell people, don't not to open the file.  When your program detects the file is therefore more open giving the error, and then write about everything that you stored in the memory (or read about in the temp file and write) before adding the latest data to the file.

• Cannot paste into Dreamweaver CC 20141 after any browser on Windows 7 opening system...

  I could not stick anything in the Code or Design mode after the upgrade to Dreamweaver CC 20141 this week on my Windows 7 system. I discovered that if I restarted my computer and opened Dreamweaver without opening any browser (tried Chrome, Firefox, IE, Safari and Opera), then I could paste them in the creation and Code. After that I opened in ANY browser, however, I could no longer stick in Dreamweaver could not paste in Dreamweaver again unless I restarted and did not open to all browsers. At first, I thought it was a problem with Chrome (a common culprit) and uninstalled all of my extensions, but Chrome wasn't clearly the culprit this time. All five of my browsers (with system time consuming reboots in-between) has triggered the same inability to paste it in Dreamweaver. I had not installed the update on my laptop Windows 7 again, and I found that that always worked very well, so I uninstalled the 20141 to my desktop system update and reinstalled the previous version. That eliminates the problem, but I wish I could keep my Adobe software updated without experiencing these issues to the President.

  Thanks, Preran. After uninstalling the 20141 updated and reinstall the previous version, I have now installed upgrading 20141 again. Rather than jump straight into the restoration of the preferences, I decided to test it as-is, and it worked! No problem with sticking after you open one of my five browsers. I wonder what might have been wrong the first time... or which has been fixed during the process of uninstalling/reinstalling. In any case, it's working again now, and I am grateful. Thank you!

• After having stuck trying to upgrade Windows7 for Windows 10, the system gave back me to Windows 7.  Now, I think I lost my Adobe Reader software.  I can't open PDF documents.

  After having stuck trying to upgrade Windows7 for Windows 10, the system gave back me to Windows 7.  Now, I think I lost my Adobe Reader software.  I can't open PDF documents.

  Use the uninstaller to uninstall, if you can.

  clean by Download Adobe Reader and Acrobat tool - Adobe Labs

  Restart your computer

  Reinstall the reader Adobe Acrobat Reader DC install for all versions

• Create a hyperlink that does not open a new window if a window containing the url is already open?

  Is there a way to create a hyperlink to a url that ' climbs to ' window of the URL if it is already open in the browser?  Therefore, a new window does not open and the existing window containing the hyperlink would not change either.

  If the target url is not already open, then yes the link could be open in a new window or in an existing window.

  Does anyone know if there is a command/code for this?

  Hello

  from the point I understood, that I see, is the relative to the appearance as described here (I used "function in my DW help):

  http://help.Adobe.com/en_US/Dreamweaver/CS/using/WScbb6b82af5544594822510a94ae8d65-7d2da.h tml

  Quote:

  In the target menu in the property inspector, select the frame or window in which the document is bound to appear:

  • _blank opens the document in a new browser window, leaving the current window untouched.

  • _parent opens the document linked in the frameset parent of the frame that the link appears, replace the set of frames together.

  • _self opens the link in the current frame, replacing the content in this context.

  • _top opens the document in the current browser window, replacing all frames.

    Frame names also appear in this menu. Select an image named to open the document linked in this framework.

  Hans G.

• Change the size of a window that is already open

  Hi all
  
  Is anyway to change the size (800 x 480), a window that is already open? The following code opens the window:
  
  HAPwindow2 = window () .new ("Haptek_player")
  tRect = HAPwindow2.sourceRect
  HAPwindow2.rect = HAPwindow2.sourceRect.offset (190,0) - d.left, d.top
  HAPwindow2.open)
  end
  
  I know how to change the size of the video in the window (window("Haptek_player").movie.sprite (1) .rect = rect (0, 0, 800, 480)) but I don't know how to change the size of the window itself. Any ideas?

  Here's the answer:

  on haplayer2

  tRect = window("Haptek_player").sourceRect.offset (190,0)

  If _player.windowPresent ("Haptek_player") then

  Window ("Haptek_player"). Rect = tRect + rect (0,0,624,280) - left, top, right and bottom 400 165 - tRect.offset (190,0)
  Window ("Haptek_player"). Movie.Sprite (1) .rect = rect (0, 0, 1024, 600)

  end if
  end

  624 280 values come if you subtract the resolution you want to perform from the original window dimensions (in my case 400 x 320).

• delete the file or ignore if it is already open

  I have a piece of code that dates back to the time of LabVIEW 7.1 who should write an ascii text file to a server once every 30 minutes.  Each half hour file is the previously published, to which is added another 30 minutes of data and 4 contains more data than does three 30 minutes so I iterate through a file number, 2, 3, 4, etc. and so on...  I write each new file I attempt to remove his predesessor such that in an ideal case there is only a single file sitting there at all times...  However, I want people to be able to open files on this server remotely any time they want to... In LabVIEW 7.1, if I tried to delete a file that was already open, it did NOT generate a stop error show but just went...  I could manually later then go start the file here or there that someone would open during the attempt to delete was made...

  But now I'm running in LabVIEW 2011 there is no the same luxury...  If I try to delete a file that is already open, the code generates an error and wait...  It is bad because nobody is there to answer...  I read another post on the search to see if the temporary files exist, but I don't know exactly what to look for so that people can use one of a slew of programs, reading from Excel to Matlab to WordPad to open these ascii text files...  Surely, there must be an attribute of a file that I can watch that will tell me it is currently open and if so, I can just ignore this deletion and move...

  Bottom line, it is how can I tell that a file on a server is opened by an unknown application on some Office far away?

  Thanks bob...

  Most likely, you are running in wiich auto error handling is enabled by default in new versions of LabVIEW (it did not exist in older versions). Whenever a function returns an error, but the error is not wired, it will appear an error message.

  Make sure that you manage the error in not leaving the error disconnected. (for example just Ingore by wiring up to a limit of structure) so it appears an automatic error dialog box.

• Firefox does not start - claims that it is already open

  Firefox does not start. He claims to be already running, but that doesn't seem to be the case.

  I tried to create a new user profile, but when I try to open Firefox now, the menu "choose user profile". I tried the new profile and they old, and both give the same error message. "Firefox is unable to use the"Default user"profile because it is in use. To continue, close the Runspace of Firefox or choose a different profile. »

  There is an entry for firefox.exe in the menu of "details" to my task manager and nowhere else. When I try to put an end to this task, I get the following error: "the operation could not be performed - access denied."

  Due to some troubleshooting research, I tried to delete the parent.lock my profile folder, but I get this error: "the action cannot be completed because the file is opened in Firefox."

  I tried to transfer my bookmarks and preferences from Firefox to Chrome, but I had a similar error suggesting that Firefox was already open and I have to close first.

  I also turned off my computer and uninstalled and reinstalled Firefox several times.

  I'd really rather not lose all my bookmarks Firefox, modules, and preferences. I also prefer to use Firefox for Chrome, so if anyone can help me I would really appreciate it. I don't know what else to try.

  My PC runs Windows 10, incidentally.

  Try to delete the parent.lock file in the Firefox profile folder.

  • C:\Users\ < user > < profile > \AppData\Roaming\Mozilla\Firefox\Profiles\.
  • http://KB.mozillazine.org/Profile_folder_-_Firefox

  See:

  • http://KB.mozillazine.org/Profile_in_use
  • https://support.Mozilla.org/KB/Firefox+is+already+running+but+is+not+responding

  What security software do you have?

  Try to create a new shortcut on the desktop Firefox and maybe to reinstall Firefox via a clean reinstall (i.e. remove the Firefox program folder).

  If you cannot remove the Firefox program folder and then try to rename this file to "Mozilla Firefox.old".

  • (Windows 64 bit) "C:\Program Files (x 86) \Mozilla.
  • (32-bit Windows) "C:\Program Files\Mozilla Firefox\"

  Start the computer in Mode safe mode with network support Windows (on the startup screen, press F8) to see if that helps.

  • http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/
  • http://www.7tutorials.com/4-ways-boot-safe-mode-Windows-10

• If I click once on an e-mail in the message window while I closed the preview window, I opened that makes e-mail?

  If I click once on an e-mail in the message window while I closed the preview window, I opened that makes e-mail? I worry because I don't want to open a message that my bad-ware download on my computer. If the preview window is closed, I noticed that the number of e-mails read does not change when I click once on e-mail. Can I assume that unread means that it has not been opened.

  Read the answer! Your question is answered there.

  Read / unread is purely an indicator. It has no real meaning. If you go into the menu (alt + T) tools > options > advanced > reading and display, you can change when a mail is marked as read in immediately to 10 seconds (this is what outlook express used) up to 1000 seconds.

  The software marked the email read is that this logic can go. It's always "BOLD", the software did not mark the message read.

  You open the mail? It is an unquantifiable statement.

  In the context of Thunderbird an individual mail is not a discrete element that is stored. It is a part of your data for mail/News. So try to equate open to action just does not fit.

  Thunderbird received mail as a series of lines. He collected in an email that he stores in a file with all your other emails for this folder. You open the file in that the mail is stored? Totally irrelevant Thunderbird opens to get mail every time that mail is added to the folder or to view a mail in this folder.

  Each time a letter is displayed (any mail) the file all your emails for this folder are saved in the opening and reading.

  If clicking on the mail list 'open' the file. Probably not, it was probably already open. The file is opened, read, written to and updated probably half a dozen times since Thunderbird started so if you click on the mail to see won't change anything good at all. If the e-mail file has been closed it will be open to view the contents of the mail, but he is perhaps already open.

  The key is that you try to apply assumptions to mail that simply do not apply. That's why I sound as if I'm going in circles.

  You also may ask, when I fill the kerosene tank my electric light.

  • The software mark mail as read when you say
  • It opens files underlying storage constantly. Clicking on an entry may or may not cause the opening of the file.
  • Your mail is not in a file on its own, it is in a file that contains all the messages in the folder and the mail deleted until the folder is compacted.

• Does not work by clicking the shortcut of Firefox to specific profile when it is already open. What Miss me?

  Well, it's a difficult problem to describe in one sentence.

  I am currently using windows. I have 2 Firefox profiles, and all of them have desktop shortcuts to the:
  "C:\Program Files (x 86) \Mozilla '-no-remote Pei"Developer ".
  "C:\Program Files (x 86) \Mozilla '-no-remote Pei"lazy ".

  They work very well. The thing is: If the profile is already active and I click on the shortcut, I get the error "Firefox is already running but not responding do not ' (fails just Firefox to open. The current open window still works). The behavior I want is either maximize/orientation of the corresponding window, or open a new window with the same profile. Is it possible to do this? What Miss me?

  I don't know if I'm being clear. In other words:
  -Shortcut to a specific profile works very well
  -When the profile is opened, double-click the shortcut for the office even
  -Receive an error popup "Existing Firefox to run"
  -Press ok, the current profile still works, but new window opens as expected

  You can't open a link if you use the - No.-line of remote control switch.
  You will need to start a profile without the - non-interrupteur to distance.
  Then you can open external links in this instance of profile (but not in the other).

  • http://KB.mozillazine.org/Opening_a_new_instance_of_Firefox_with_another_profile
  • https://developer.Mozilla.org/Mozilla/Multiple_Firefox_Profiles

• None of my icons in Firefox will open Firefox today. And when I try to reinstall it, the message said that Firefox is already open. But I'm not.

  Every morning, I click on the Firefox icon and it opens. Today, that he will not. I try to reinstall it, a message that Firefox is already open. But I'm not. Of course I can use Chrome or Internet Explorer (as I do), but I do like Firefox. And I also want to know what the problem is... in case something serious is wrong with my computer.

  Hello

  • Go to your task manager (right-click your taskbar, and then select "Start Task Manager" - http://www.howtogeek.com/108742/how-to-use-the-new-task-manager-in-windows-8/)
  • Make sure that Firefox is on this list. In this case - select this option and end task.
  • Try to open Firefox again; If it still doesn't after some time, repeat the two steps above, and then try the Firefox Safe Mode
    • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
    • When the Firefox Safe Mode window appears, select "start mode safe."

  

  • If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. Please follow the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.
  • To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. This might help others with the same problem.

• I get pop up windows when I use my browser even though I turned off pop ups. I have even new windows that open automatically. How can I fix?

  I have pop ups and new windows that open automatically when using my browser, I have pop ups off. How canI solve this problem?

  Hi Snyder22,

  I understand how frustrating it can be to see ongoing ads on your computer. I have an article for you with information about the stop of this behavior:

  Stop the cAds in Safari - Apple Support

  https://support.Apple.com/en-us/HT203987

  The behavior you describe can be better attributed to adware, referred to in this section of the article mentioned above:

  If you could have the adware installed on your Mac.

  If the pop-ups still on your Mac, you might inadvertently downloaded and installed adware (advertising-taking software supported). Some software that you download from some third-party download sites can include the software you want and the adware.

  If you think you have Adware on your Mac, update to the latest version of OS X El Capitan. If your Mac already has the latest version of El Capitan, restart it. El Capitan removes adware only when connecting. If you still see the advertising on your Mac, Contact Apple.

  Be vigilant and thank you for visiting the communities of Apple Support.

• Firefox does not open. Cannot update or delete. Says it is already open and I can't find how to close it.

  Firefox shows that it is already open and must be closed in order to update or delete. I can't locate a place to complete the process. It's probably something very simple, but I'm not a computer genius. Thank you!

  Have you tried you look for firefox.exe in the Task Manager process tab (you can get to that by using Ctrl-Alt-Delete, usually)? If you click firefox.exe in the list and then click on end process, it should close Firefox, even if Firefox does not seem to be running (sometimes the process takes a little longer to close the main window). If all else fails, maybe a reboot?

• When I start my computer I get this error message: Windows cannot open this file: GLBD4EA.tmp

  When I start my computer, I get this error message:

  Windows cannot open this file: GLBD4EA.tmp

  To open this file, Windows needs to know what program you want to use to open it. Windows can go online to look for automatically, or you can manually select from a list of programs installed on your computer.

  What do you do?

  -Use the web service to find the appropriate program
  -Select a program from a list of installed programs

  No selection works for me. I don't know what concerns the .tmp file, or why I need to open it.

  Please help :)

  Hello

   
  Perform the following steps to remove the file from the registry.
  a: type regedit into the search box start and click on enter.
  b: Search now to the following key
  HLKM\SOFTWARE\Microsoft\windows\currentversion\run
   
  then delete the following key
  53E412B3-9907-4F9E-A6DC-D0106D1D72C
   
  Important:  This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information
  However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  322756 (http://support.microsoft.com/kb/322756/)
   
  Hope this information helps.

• 5 - file already opened it occurs without open instance of Excel.

  Questions about my particular problem have been published several times and I've studied all.  But this problem is slightly different from what I found on the forum.  This issue I'm fighting for the past two weeks and I can't seem to find a solution for this; Therefore, I turn to you in the hope that someone with more experience can point me in the right direction.

  I get the error code 5 - file already open in my application.  I know that the most common answer, a reference has not been closed, but I checked and all references seem to be closed.  The attached error code.VI is not my request, but a simple file that I created after that error code 5 came the routine I/O.  The screenshot shows Manager tack;  even if you do not see the entire list, Excel appears in it, but it shows that the particular .xls document I am trying to open is already open.  This is where my problem differs from anything else I've read.  Here is the head of scrather, I still get this error even after killing Excel using the Exec.VI system.  The instance of Excel is clearly removed from the task list, but still the error gets generated by writing in the File.VI worksheet.  The second channel indicator shows the content of the list of tasks for your viewing.  I can't find an instance open Excel anywhere, so I don't know why LV thinks that the file is already open when it is not.  There must be a reference open so he can think about it, but why does it not appear in Manager tasks?  The .zip file contains my VI as well as screws.

  Thanks in advance for any assistance you can provide.

  Reese

  I found the problem.  The narrow reference does not work with attachments in .NET objects.  In the Invoke to AttachmentCollection node, a method called "Features" that kills the reference created with the purpose of file name there. I've also attached the VI.