Write in the text file on request

Similar Questions

• Need help: UTL_FILE read and write in the text file

  Hello, I'm on version 11 GR 2 by using the UTL_FILE function to read a text file and then write the lines where it starts with the word "foo" and put an end to my writing in the text file where the line with the word "ZEN". Now I have several lines that begin with 'foo' and 'ZEN' allow a paragraph, and in this paragraph, there is a line that begins with "DE4.2". Therefore,.
  I need to write all of the paragraphs that include the "DE4.2" line in their beginning and end of lines 'foo' and 'ZEN '.
  
  FOR EXAMPLE:
  
  FOO/234E53LLID
  IT'S MY SECOND LINE
  IT'S MY THIRD LINE
  DE4.2 IT OF MY FOURTH LINE
  IT'S MY FIFTH LINE
  ZEN/DING3434343
  
  FOO/234E53LLID
  IT'S MY SECOND LINE
  IT'S MY THIRD LINE
  IT'S MY FIFTH LINE
  ZEN/DING3434343
  
  I'm only interested in writing the first paragraph tha includes line DE4.2 in one of the paragraph of lines not the second ther that does not include the "DE4.2".
  
  Here is my code so far:
  
  CREATE OR REPLACE PROCEDURE my_app2 IS
  Utl_file.file_type INFILE;
  outfile utl_file.file_type;
  buffer VARCHAR2 (30000);
  b_paragraph_started BOOLEAN: = FALSE; -flag to indicate which required paragraph is started
  
  BEGIN
  -Open a file to read
  INFILE: = utl_file.fopen ('TEST_DIR', 'mytst.txt', 'r');
  -Opens a file for writing
  outfile: = utl_file.fopen ('TEST_DIR', "Out.txt", "w");
  
  -Check the file is open
  IF utl_file.is_open (infile)
  THEN
  -lines in the file in loop
  LOOP
  BEGIN
  UTL_FILE.get_line (infile, buffer);
  APPLICATION STARTING POINT-
  Buffer IF LIKE 'foo %' THEN
  b_paragraph_started: = TRUE;
  END IF;
  -SEARCH FOR GRADS APPS
  IF b_paragraph_started AND buffering LIKE '% 4% ' THEN
  UTL_FILE.put_line (outfile, buffer, FALSE);
  END IF;
  -REQUEST FOR ENDPOINT
  Buffer IF LIKE '% ZEN' THEN
  b_paragraph_started: = FALSE;
  END IF;
  UTL_FILE.fflush (outfile);
  
  EXCEPTION
  WHEN no_data_found THEN
  EXIT;
  END;
  END LOOP;
  END IF;
  UTL_FILE.fclose (INFILE);
  UTL_FILE.fclose (outfile);
  EXCEPTION
  WHILE OTHERS THEN
  raise_application_error ("-20099, ' UTL_FILE unknown error");
  END my_app2;
  /
  
  When I run this code I get only one line: DE4.2 it ME LACK THE WHOLE PARAGRAPH
  
  PLEASE ADVISE...

  I agree with reservations of Justin on the length of a "paragraph" and the number of users that are running at the same time, so here is a version without the collections.

  CREATE or replace PROCEDURE my_app2 IS
     infile utl_file.file_type;
     outfile utl_file.file_type;
     buffer VARCHAR2(30000);
     b_paragraph_started BOOLEAN := FALSE; -- flag to indicate that required paragraph is started
     b_toprint BOOLEAN := FALSE;
     l_para_start pls_integer;  -- start of "paragraph"
  BEGIN
     infile := utl_file.fopen('TEST_DIR', 'mytst.txt', 'r');
     outfile := utl_file.fopen('TEST_DIR', 'out.txt', 'w');
     LOOP
        BEGIN
           utl_file.get_line(infile, buffer);
           IF buffer LIKE 'FOO%' THEN
              b_paragraph_started := TRUE;
              l_para_start := UTL_FILE.FGETPOS(infile) - (length(buffer) + 1);
           END IF;
           IF b_paragraph_started and buffer like '%DE4%' THEN
              b_toprint := TRUE;
           END IF;
           If buffer like 'ZEN%' THEN
              IF b_toprint THEN
                 UTL_FILE.FSEEK(infile, l_para_start);
                 utl_file.get_line(infile, buffer);
                 while buffer not like 'ZEN%' loop
                    utl_file.put_line(outfile,buffer, FALSE);
                    utl_file.get_line(infile, buffer);
                 end loop;
                 utl_file.put_line(outfile,buffer, FALSE);
              end if;
              b_paragraph_started := FALSE;
              b_toprint := false;
              utl_file.fflush(outfile);
           end if;
        EXCEPTION
           WHEN no_data_found THEN
              EXIT;
           END;
     END LOOP;
     utl_file.fclose(infile);
     utl_file.fclose(outfile);
  END my_app2;
  

  Test:

  SQL> !cat mytst.txt
  FOO/234E53LLID
  THIS IS MY SECOND LINE
  THIS IS MY THIRD LINE
  DE4.2 THIS IS MY FOURTH LINE
  THIS IS MY FIFTH LINE
  ZEN/DING3434343
  
  FOO/234E53LLID
  THIS IS MY SECOND LINE
  THIS IS MY THIRD LINE
  THIS IS MY FIFTH LINE
  ZEN/DING3434343
  
  FOO/234E53LLID again
  THIS IS MY second SECOND LINE
  THIS IS MY second THIRD LINE
  DE4.2 THIS IS MY second FOURTH LINE
  THIS IS MY second FIFTH LINE
  ZEN/DING3434343 again
  
  SQL> exec my_app2;
  
  PL/SQL procedure successfully completed.
  
  SQL> !cat out.txt
  FOO/234E53LLID
  THIS IS MY SECOND LINE
  THIS IS MY THIRD LINE
  DE4.2 THIS IS MY FOURTH LINE
  THIS IS MY FIFTH LINE
  ZEN/DING3434343
  FOO/234E53LLID again
  THIS IS MY second SECOND LINE
  THIS IS MY second THIRD LINE
  DE4.2 THIS IS MY second FOURTH LINE
  THIS IS MY second FIFTH LINE
  ZEN/DING3434343 again
  

  You may need to change the length (buffer) + 1 depending on your platform and if you want a blank line s NLE out paragraphs, add another call to put_line after that outside of the loop in the fi l_toprint block.

  John

• Can all help with VI to get data (HEX) serial number and write in the text file

  Hello I am struggling with this problem for 2 months... They get help from different I thought I solved the problem, but of no use yet I stand on zero

  Problem: I need to get data on USB high speed HEXAGON shaped (coming in hexadecimal and be stored in the text file to the hexadecimal format as each hexadecimal value online different I'll also to attach the file)

  Get us ASCII on series or VISA read but when trying to convert to hex as shown in text file making it slower to deal with code, I know that my VI will have to improve more... I'm waiting for suggestions

  Need urgent help...

  Thanks in advance

  Hi Ali Afzal,.

  I think that the attached example can work for you. If not, then try the solution with sending the data to a parallel running the loop and store it there.

  Mike

• How to catch exceptions and write in the text file

  For all developers,.

  This is the problem,

  I want to print my exception stack trace in a text file.

  This developer can know and analyze on what function is error and what exception for this error...

  Is it possible to do this?

  Thank you...

  Yes, you can write like try (), it returns a string, and you can write that string to the file.

• How to write the text file in Shockwave?

  Someone knows how to write the text file in Shockwave on the disc of the user?
  
  Thanks in advance.

  These Xtras can cause a lot of havoc when used with the intent to hurt.
  What you can do is to write with setpref and store a list of backups and the
  registers itself separately. Next, you need to build your own save/open
  dialog box for the user:
  * Choose a previously saved file to load or replace
  to create a user type the name of a new file to be saved.

  The only thing that remains is that the user can't decide where files
  are saved.

  Manno

  SiuLinda wrote:
  > Thanks a lot for your answer.
  > Yes, cookies is good, but I have to write a program to save the text file in
  > When the user wants, the user can open these files later if they like as, using
  > Filextra and Fileio, but I found that all these Xtra extensions seem to be not supported by
  > shockwave.
  >

  --
  ----------
  Manno Bult
  [email protected]

• Writing data in the text file or excel spreadsheet

  Hello

  I have a silly question to ask questions about the writing of data in a text file or a spreadsheet. I have an example that simulates a sine-swept DAQmx. The output it provides is the (amplitude and phase) frequency response function that is plotted on a graph (see VI) attached. I like to use these data for further analysis by transmitting the data to a text file or a spreadsheet. I've tried a few things, but the thread is broken. I guess I use the sink badly - so I was wondering, can you please advise me on what sink should I use?

  Your help would be very appreciated,

  Thank you very much

  REDA

  The wire is broken, because you cannot connect this type of data to one of these two functions. The data source type is a table 1 d of the clusters, where each cluster contains two tables. The text file write accepts strings, not clusters. Writing on a file action accepts dynamic data, and while you can convert dynamic data tables, there is no built-in mechanism to convert a table 1 d of the clusters of two matrices.

  What you need to do is to convert the data in a format which can be accepted by these functions. Since you want to have a "spreadsheet" file then you should use writing to the spreadsheet file that creates a delimited text file. Since the frequency data would be the same for the plot of the magnitude and phase diagrams, you can have 3 columns: frequency, amplitude, and phase. You can take off the items using Unbundle by name, and then create a table 2D of each element of the cluster. The real question is to know if you want to save the data at each iteration and if you simply add on the file. The attached figure shows write an initial header and then adding just streaming the data.

• Problem with end of line in the text file.

  Using LabVIEW 2010 on W7 64 bit in the USA.

  I have an application in which I write in a text file.  I use the function "Write to a text file" to write the text and "Reading a text file" function to read again.  My problem is with the end of line character.  The text that I write is a long chain, not an array of strings.  While building this chain, I insert the constant EOL of the palette of channels function to indicate that a new line is planned.  My tests showed this EOL constant values of consecutive bytes 13 and 10.  After writing all the text in a file, I can open the file with Notepad, or Word, or something else, and it is displayed correctly.  When I read he returned with the function of text file reading, I'm trying to parse the string by searching for the same constant EOL, but it does not work.  A closer examination of the extracted string from the file reveals that the value of end of LIFE has changed for only 10.  The location of the byte to 13 disappeared.  I know there is a note on the writing of the function of text file add/change the EOL characters, which are the default values of the system, but the note specific tables.  I manually put the value in the string.  Does anyone know why this happens and how to fix it?

  Thank you.

  The help of reading from text file function

  The function converts all characters in end of line break characters online platform, dependent unless you right-click the function and remove the check mark next to the menu item Convert EOL .

  Right-click your reading and uncheck the EOL conversion.  I recommend to do the same thing to your writing to text file feature.

• When the file is saved in windows 7, save the description with the name of the file by the text file

  I need to save files much but don't have time to write the file name and detailed inform instead. When I want to save the file, windows 7 displays the window requires the file name and type. But I need another box that I can describe the detailed information associated file name. This will generate the text file that detailed information with the name of the file.

  Is there a s/w or windows 7 can do that?

  It is not possible to save a file without a name. You must specify a name for the file. In addition, you can add additional information in the comments of the file area. You can open the section "Comments" by going to the properties of the file and go to the Details tab.

• Save the text file on the desktop

  Hello world

  See my code below. It saves the text file in the root folder. But I want to save my file of text of the report on the desktop in a folder called report.

  Secondly, when I run this script twice, he adds comments twice in the text of the report file and does not replace the text file report.

  Can someone please correct this JS script.

  function write (text) {}

  var myDocName = app.activeDocument.name;

  var myFilePath1 = + ' / ' + 'Report' + ".txt";

  var monFichierTexte = new queue (myFilePath1);

  If (myTextFile.exists)

  {

  myTextFile.open ("e");

  myTextFile.seek (0, 2);

  }

  else {}

  myTextFile.open ("w");

  }

  myTextFile.write (text + "\r");

  flag = true;

  myTextFile.close ();

  myTextFile.execute ();

  If (flag == false) {}

  Alert ("no error")

  }

  }

  Thank you

  You have contradicting wishes.

  Compare this sentence

  designmon79 wrote:

  I need a code JS that replace my office report text file (if the output) and write the cool comment text in the file.

  with this

  It replaces the report file, but also delete text in the file.

  It seems obvious that if you replace the previous file, the old content will be deleted.

• Read/write to DB text file

  Hello
  
  What is the effective way of reading the text file and write to the DB table.
  
  Forms Builder (10.2.0.3.0) - version
  DB 10 g 2
  
  
  Rgds
  
  
  sexy

  Hello

  TEXT_IO is a software package, integrated forms. Webutil has too (but it's CLIENT_TEXT_IO, which can be read from the client computer), in which, plain TEXT_IO reads the file from the server computer.

  As I said before, it depends on the number of records / size of the file. If he records little (say a few hundred), then you can go for TEXT_IO. However, if the size of the file is very high / you have more records (say thousands / millions), then SQL Loader is the best bet.

  If you are worried about the performance (i.e. If you have more records to be inserted), you can create a batch script (which loads the data into tables using SQL Loader) and call the command script using the HOST of shapes command.

  You can see the SQL Loader manual (which I gave the link before), for orders / check the syntax of the file etc and create a command script. Probably, if you're looking for the PL/SQL forum / forum SQL Loader, you will get more ideas and samples.

  HTH.

  Arun-

• Add data at the end of a specific line in the text file

  Hello

  I'm trying to add data at the end of the last 4 lines of the text file attached with the ' table to add.  4 rows (422.5800 entry), I would add the first entry of the 'Array to add' entry, on the 5th line to add the second entry of the 'Add picture' and so on.  How can I do this?

  Any help will be appreciated.

  Sincerely,.

  hiNi.

  After re-reading your post, I think that's what you really want to start adding after the first 4 rows.

• Odd number of columns in the text file

  Hello everyone

  From an Excel (.xls) file, I saved (tabs-delimited text) file and open in Labview. The file has only 2 columns (apparently), but my VI says he has 12! I tried to find any character 'lost' in the file but it's all in the first two columns.

  However, if I open the .xls file, save the text file delimited tab, open this tab delimited text file using excel, hit save and then open in my VI, the VI will tell me that the file has only 2 columns. Strange.

  Enclosed please find my VI (I tried two different methods to load the file and got the same results).

  Thank you

  Dan07

  

  

  Around this line, you will notice a bunch of tabs:

  240.4926373\t507.1851226\t\t\t\t...

  Edit: I would like to clean up the source, but if you're stuck here is a way to clean:

  

• list box given to the .csv file using write on the worksheet File.vi

  Hi, I use the write on the worksheet File.vi to write data multicolumn ListBox to the .csv file. If I do record from Excel, the pop-up window shows as an attachment. And data listbox are too different.  I want the data displayed in the first line not the second row (third photo).

  Thank you for your help.

  Before making your Save As in Excel, change the cell formatting of number. This should avoid the scientific notation conversion before you re-register.

  Or just use Notepad to display the file instead of Excel.

• Download the text file of the site domain

  I need to download a text file to a directory of a domain site.  Text file is saved  What to do next?

  On your PC, right-click on the text file, and then click on copy.

  Connect to the domain (if you don't know how, you will need to get instructions from the domain administrator on how to configure your PC to connect to the domain - specific settings that are required there and they differ by area - and you may need to be configured on the domain and given rights).  Once the installation program I would map a drive to the field to make easier access next time.  Navigate the site of field to the directory where you want the file to exist.  Right-click on the directory and click on paste.

  The file will now have been copied in the domain site directory (assuming you have the appropriate permissions on the domain server to add files in this directory - you will need to talk to the domain so that administrator it it gives you an "access denied" or "you do not have sufficient to perform this task" or a similar error message).

  That's all there is to it.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Playback/record to the text files using HTML5 as a basis for the code

  Hi, I'm new and I did some research and I found a variety of solutions that seemed a little more complicated than I want. I would like someone to direct me to something that could teach me how to do two things.

  (1) read the text files (essentially my difficulty is how to interact with the file system of playbook for reading files and how to save text files with output 2).

  It is not necessary to try and catch.

  Thanks in advance!

  Hello ignites,

  The following thread contains an example of manipulation of text files and also contains a link to another thread by Tim Windsor where he describes working with other file types:

  http://supportforums.BlackBerry.com/T5/Web-and-WebWorks-development/ReadFile-and-data-manipulation/m...

  Let me know if you have any questions.

  Erik Oros

  BlackBerry Development Advisor