Problem with 'Write to the worksheet File.vi' in Labview 8.2

Similar Questions

• list box given to the .csv file using write on the worksheet File.vi

  Hi, I use the write on the worksheet File.vi to write data multicolumn ListBox to the .csv file. If I do record from Excel, the pop-up window shows as an attachment. And data listbox are too different.  I want the data displayed in the first line not the second row (third photo).

  Thank you for your help.

  Before making your Save As in Excel, change the cell formatting of number. This should avoid the scientific notation conversion before you re-register.

  Or just use Notepad to display the file instead of Excel.

• Problem with writing in the new file every day, error #1

  Hi, I have build a vi that writes data measured for each second of the file. This vi will be used for the acquisition of long-term data and I want to write the data to a separate file every day, else the file becomes

  very large. The vi is supposed to work like this, first set the folder to save it and then start logging with the "datalogon" button, first write the column names in the file and after that write data

  every second. If the date is the same newspaper, data, if the date is not the same write the new file name, write the column headers and write the data again every second. The date is used as the file name.

  This work is quite good only at the beginning of the vi I get the message "error 1 occurred open/create/replace the file writable spreadsheet String.vi-> write to the spreadsheet (string) .vi-> NHR file -

  SerialDaq - 03 APR 2013 .vi. I did some tests and it seems that in the first or the second round of the loop, the path in the annex is ' file name:------"and not drive:- and this seems to be caused by the fact

  that I first write the column headers, and then the data (if I write only the data of the problem does not occur).

  So I (think) for what is now the problems but don't don't know how solve it, I would appreciate it if someone could help me with this.

  Regards, Martin

  I made the change you mentioned and to my surprise I got the error message and also, with the vi you sent, I took look at it and found that:

  -If I first enter the "folder to save the file', then run the vi and then press on the" data connect "I don't get the error.

  -If I first run the vi, then enter the folder ' save file to "and the hit" the data log on ' I get the error.

  I also tried with the vi original (without the connection shiftregister in the case of false and init for removal) and which gives the same result as above. If I get the

  error message and choose stop the vi, start the vi again once I don't get the error because the folder in which the file is entered. This issue appears only when there is no file «»

  to save the file "in the dialog box.

  While I'm writing this I realize that "folder to save the file" is outside the while loop so only executed at the start of the vi is maybe I have to put it inside the while loop? A tried

  This and at first, it seems that the problem is solved, I don't get the error message on my screen, but it still appears on the error handler in another part of the vi (visa series).

  Oh, Yes. The 'name of the resource visa' and 'file to save the file' are both outside a while loop and are only read at the start of the vi, at the moment they have not a valid

  the error value is generated.

  Problem solved, thank you for your comments!

  Regards, Martin

• Problem with sound in the ProRes files on first last, CC on 10 to win

  Hello, I've updated my CC Pro first to the latest version on my Windows 10 PC. Since then, I have a problem with the sound in ProRes files recorded with recorder Odyssey 7 q. My first reads the file and it detects sound only partially (in each file it our times of 2-3 seconds of silence, followed by its normal).

  It happens only on my first on Windows. On my MacBook with the same version of first, everything works fine. Apart from the first, I play Prores files successfully on my windows (with sound).

  You know all the solutions to this problem? I tried to reinstall codec first and Quicktime on my PC. Thanks in advance for the help.

  Convergent Design and Adobe are aware of the problem and working on a fix.  You need to roll back to 2015.3 for the moment.

• Problems with export/save the text file in Indesign

  Hi scripters,.

  I have a problem that I don't know how to solve.

  InDesign CS3, Mac and PC - seen as the problem on some Macs, not all, but some still have / get this error.

  I made a script that collects the text of some managers of related texts:

  for (var i = 0; i < myMainList.length; i ++) {}

  var curTF = myMainList [i];

  while (curTF! = null) {}

  myExportString += curTF.contents;

  curTF = curTF.nextTextFrame;

  }

  myExportString += "\n\n###\n\n";

  }

  alert (myExportString);

  It collects the text and also it will display ok in the dialog box.

  However on some computers (Mac) the following will only produce a byte zero of the file (when there are several textframe in the above loop, a zero-byte file is still produced - but again, it is only on some Mac) If a single textFrame with only a small portion of the text is saved/exported it works:

  var Folder.myDocuments.path = myFolder + "/ Desktop/export";

  //alert ("Myfolder:"+ MyFolder ");

  {if(!myFolder.exists)}

  Folder (myFolder) .create ();

  }

  var myFileName = myFolder + "/" + win. FilePnl.FileGrp.FileName.text + ".txt";

  var myFile = new file (myFileName);

  myFile.encoding = 'text ';

  myFile.open ('w');

  myFile.write (myExportText.replace("/\u2011/g",'-')); Replace (/ [^ a-zA-Z 0-9] + / g, "));

  myFile.close ();

  It has to do with using .silence?

  I hope someone can help me with this summer working on this problem for means of time now.

  Thomas

  Somehow myExportString became myExportText.

  In addition, what happens if you replace the text before write you it

  to deposit?

  Another thing you could try is to cast it to a string as follows:

  String (myExportText)

  Also, maybe try to change the encoding "UTF-8".

  Substances

• Problem with 'systimestamp' and the CSV file

  Hello
  
  I'm trying to insert data from a CSV file. One of the columns in my table must feed with oracle system date and this column's timestamp format.
  So here's my control file syntax:
  
  DOWNLOAD THE DATA
  INFILE '__FICHIER_PLAT__ '.
  ADD THE CUSTOMERS TABLE
  FIELDS TERMINATED BY '; '.
  (
  DATE_CREATION "systimestamp"
  FILLING filler1,
  CODE_CLIENT ' TRIM (: CODE_CLIENT).
  TYPE_CLIENT ' TRIM (: TYPE_CLIENT).
  filler2 FILLER,
  START_DATE ' TO_DATE (: START_DATE, 'YYYYMMDD'). "
  DATE_RESILIATIO ' TO_DATE (: DATE_RESILIATIO, 'YYYYMMDD'). "
  Filler3 FILLING,
  Filler4 FILLING,
  Filler5 FILLING,
  [...]
  Filler78 FILLING,
  Filler79 FILLING,
  Filler80 FILLING,
  Filler81 FILLING
  )
  
  I get this error:
  Sheet 1: Rejected - error on the CUSTOMERS table, column FILLER81.
  Column not found before the end of the logical record (use TRAILING NULLCOLS)
  
  It seems SQL * Loader see DATE_CREATION 'systimestamp' as a field of my CSV file.
  
  You know a syntax to define a column with systimestamp?
  
  Thank you!

  Alexis

  SYSTIMESTAMP does not seem to be supported (even in 11g) this way. If you read the [using SQL * Loader to generate input data | http://download.oracle.com/docs/cd/B28359_01/server.111/b28319/ldr_field_list.htm#i1008234] you'll see that only CONSTANT, expression, RECNUM, SYSDATE and SEQUENCE are supported - that is to say SYSDATE is a special case.

  However, "SYSTIMESTAMP" is a perfectly good PHRASE. My example load historical prices from Yahoo finance.

  Data:

  ORCL,03/09/2008,21.52,21.57,21.01,21.19,40638100,21.19ORCL,02/09/2008,22.3,22.37,21.5,21.55,43622600,21.55ORCL,29/08/2008,22.4,22.43,21.7,21.93,35278100,21.93ORCL,28/08/2008,22.29,22.73,22.27,22.64,18700300,22.64ORCL,27/08/2008,22.2,22.57,22.13,22.34,21338300,22.34ORCL,26/08/2008,22.16,22.38,22.01,22.15,16293500,22.15ORCL,25/08/2008,22.54,22.71,22.19,22.21,20109200,22.21ORCL,22/08/2008,22.52,22.82,22.39,22.7,18335300,22.7
  

  load data
  into table price_history append
  fields TERMINATED BY ',' OPTIONALLY ENCLOSED BY '"'
  ( ticker char
  , trade_date date "dd/mm/yyyy"
  , open_price
  , high_price
  , low_price
  , close_price
  , volume integer
  , adj_close
  , update_ts expression "systimestamp"
  )
  

  and data load very well.

  Compared with the DEFAULT value in the column definition:
  -Use the value DEFAULT if that's what you always (or almost always - you can always ignore it)
  -use * expression 'systimestamp' * in the SQL * Loader if control file varies according to the type of load. Or if you are not allowed to modify the table definition (for example, if it is the table of the provider).

  HTH

  Nigel cordially

  Edited by: nthomas on January 8, 2009 15:31 (minor typo)

• a problem with one of the files in the TestStand\AdapterSupport\LabVIEW directory

  When looking at the module a LabVIEW VI called for TestStand, I get the following message:

  A problem with one of the files in the TestStand\AdapterSupport\LabVIEW directory.  Please reinstall or repair.

  I made the mistake of cleaning C: in my computer.  Clean the C:\National Instruments downloads

  Why would someone put bits of applications or modules, etc. in such a directory?

  I'm not too crazy about restoring 11FR in this folder.  It's just crazy!

  If anyone has encountered this before?  No "easy"? outside re - install TS...

  Side note: I do not touch anything in the \Program files. National Instruments\TestStand\AdapterSupport\LabVIEW

  What version of LabVIEW and TestStand do you use?

  In 2012, TestStand, this directory is mapped to:

  C:\Documents and Settings\All Users\Documents\National Instruments\TestStand 2012\AdapterSupport\LabVIEW

  Have you tried mass compiling the screws in this folder?

  I had to create a new 'TestStand - default values XX.llb"file, where XX is the last version of LabVIEW you use, but I have not seen this message before.

  Good luck

  PH

• problem with write access to truecrypt readers windows 7. The mounted drive is not writing priveliges. Read-only. Cannot change in the security permissions.

  problem with write access to truecrypt readers windows 7. The mounted drive is not writing priveliges. Read-only. Cannot change in the security permissions.

  Hi amcop4591,

  1. How is - that Mount you the drive on the computer?

  2 Di you use any third-party tool to mount the drive?

  I suggest that you remove the external drive using the disk management and check back later if you can change the permissions on the drive.

  If you change the permissions, make changes to the permissions on the drive and then mount the drive.

  Mount or dismount a drive

  http://Windows.Microsoft.com/en-us/Windows7/mount-or-dismount-a-drive

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Waveforms of writing to the worksheet to help to write on the worksheet vi

  Hello

  Problems with writing 2 waveforms of the myDAQ to a worksheet. Using the "write on the worksheet vi.' does not work as it records in the file, but when you open the file to look at the results, there is no data." I got a screenshot of used vi, unfortunately the file as an attachment could not be validated. Someone sees the problem and no solution?

  http://i50.Tinypic.com/2isil8w.jpg

  Thank you

  You need to do a little basic troubleshooting. Make a right-click on the son goes into the loop, and selection "probe". After you run the VI, the content of the probe and see if there is no data there. I had to put a delay in the loop of the acquisition or specify a number of samples to get the data in a consistent manner.

• Setup cannot write to the destination file

  I try to install software on Windows 7 that has always worked well in XP and earlier versions of Windows.  When I run the Setup on Windows 7 routine, I get:

  Setup cannot write to the destination file "C:\Program Files\Pandawave\WorldCal.exe"

  Can someone tell me how to deal with this?  It seems to be a security problem, but I have no idea what to do about it.

  Thank you

  Dan Schwartz, Tallahassee, Florida

  It is a restriction of the UAC (User Account Control). Right click on the shortcut of installation, and then click "Run as Administrator" line to work around.

• ESXi5 - problems with NFS and the data copy store

  Hello world

  I recently moved into a solution fully virtualized for my network, 3 x 5 ESXi servers running on our GigE network.

  First of all, I use all free software from VMware, so vCentre etc is out of the question.

  I have major problems when you try to copy files between:

  • NAS (NFS) to ESXi 5 host
  • ESXi host to the NAS (NFS) 5
  • And using VMware converter between ESXi 5 hosts converter Standalone

  The problem is that whenever I'm transfer between hosts I am struck with the horrible network performance. Even if I use GigE adapters and switches between my hosts I will receive no more than 12 Mbps speed of transfer real (100 Mbit/s connect?).

  On the flipside, if I use virtual guests on the same exact host I can happily transfer data between my NAS (NFS) servers with speeds between 60-150MBps ~ (1000 Mbps).

  Examples:

  Speed of 10 Mbps of transfer of ESXi_1 copy OF NFS data store share ~

  Server2008 (comments, located on ESXi_1) copy OF NFS 75MBps transfer rate ~.

  Server2011 SBS (comments, located on ESXi_2) copy OF Windows share 2008 (ESXi_1) transfer speed 120MBps. ~

  ESXi_2 copy OF NFS data store share transfer rate 5MBps ~.

  Attached (wtf.png) example:

  I copy a file that is located on our NFS share first, it's a 3 GB file to the copy within guest OS (2008), it is indicated in blue - top speed of 80MBps

  I copy the same exact NFS share for the host (datastore1), this is indicated in red - top speed of 7.5Mbps

  The third transfer/s (green) is between the customers of windows on different hosts, transfer a 6 GB file as well as a copy of the 360 MB file - transfers two happily send to GigE speeds with a peak around 40MBps

  I can reflect these results across the three servers without modification. Copies between you will be able to run well enough (not exactly 100% use of GigE) but at the moment where I try to do something to the data store it will just choke at all about a 100 Mbps connection speed.

  The final image (wot.png) confuses me beyond belief. I would try to explain what is happening here:

  • This image shows two times the same exact file transfers, except even machine PHYSICS
  • The first (red) transfer between the ESXi_2 host server and the NFS share using the browser data store and direct download - its top speed is around 8MBps
  • The second (green) transfer between a guest server 2008 running on ESXi_2, download the same file exactly at the exact location using vSphere Client. I mean the same EXACT file; It connects to the NFS drive by the data store ESXi_2 (NFS share).

  Why on earth can my comments directly download a file on a data store connected to NFS GigE clocked and yet the same exact host cannot go anywhere near corresponding to these speeds?

  As indicated in the title, the problem seems to happen whenever I use ESXi datastore browser on the host computer using vSphere Client or between browser datastore ESXi to/from an NFS share.

  No one knows what might happen?

  Is there some sort of restriction on the transfer of files between a host and shared NFS ESXi 5? Whence this bottleneck?

  Thanks in advance for all the help/ideas that guys can throw my way.

  P.S. Sorry for the wall of text, I really wanted to give as much information. as possible.

  What type of storage you have locally on the host computer?

  I have seen this problem with write-through controllers: http://wahlnetwork.com/2011/07/20/solving-slow-write-speeds-when-using-local-storage-on-a-vsphere-host/

• problem with Safari and the opening of sites

  problem with Safari and the opening of sites

  Please describe the problem in more detail?

  Try to reset the settings of Safari:

  1. open Safari

  2. click on the Safari menu at the top (to the right of the Apple logo)

  3. Select the Preferences/Privacy tab

  4. click on remove all data from the Web site

  5. close Safari.

  Remove cache Safari files:

  1. click on finder

  2. look for the menu GO to top

  3. click on GO and hold down the option key. This will show a user library folder.

  4. click library and find the Caches folder

  5. in the folder caches com.apple.Safari Ouvrezledossier

  6. move the Cache.db file Trash.

  This should solve the problem. If it does not help, try to disable the Safari extensions

  1. open Safari

  2. click on the Safari menu at the top (to the right of the Apple logo)

  3. Select Preferences

  4. find the Extensions tab

  5 disable all extensions of

  6. relaunch Safari

• Want to Phoenix 860-010: problem with fonts and the noisy fan

  I have a new machine, just a day old, and I'm having a problem with fonts.  The file Explorer, Edge and other similar programs seem to go from a very readable font that lights up in half a second or less whenever I move down on the page in these applications.  Police that results is much more difficult for me to read because of the lightness that results. I have not met this problem before.  Frankly, I don't know the source of the problem.  Is it hardware (video card) or (Windows 10) operating system software?

  Hello @PhotoGene47,

  Thanks for the quick response!

  Have you tried to see the document that I mentioned in my previous post?  If you prefer to have the Board repaired, you can consider contacting the HP support by phone for additional options.  Please use the following http://www.hp.com/contacthp and create a folder for your question and contact HP. If you do not live in the United States / Canada, please click on the link below to get contact information for your region.
  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  I hope this helps.

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Kind regards!

• Find and read the worksheet file target of target folder

  I'm trying to find and read the worksheet file target in the target folder. Help, please. Thank you.

  

  Build Path VI will solve the problem.

• I have a windows 7 Edition licenses Home premium, still a problem with my words and exlel files.

  I use a copy of the license of windows Home premium 7, still I have a problem with my microsoft words and files, words excel files tke several minutes to open, but Excel files not not oped in my laptop, before I didn't have any problem, but now it's huge. When I ask some of them on the market, they suggested me to take the 32-bit and add 64-bit. Windows, it is the only solution for the same.

  Please suggest,
  Abhijit Gohan.
    

  Try to reinstall or repair your copy of Microsoft Office:

  How to reinstall or repair Microsoft Office : Notebooks.com