write the file

Similar Questions

• Cannot write the file in the destination folder.

  Installed the new printer of brothers. PDF (file) scanning to e-mail could sweep old printer. Error code (CC3-103-00030302). Says "failed to write the file in 'Destination folder',

  Got, it works.  Here are some things I've done.  I'm sure that some of them are useless holes to leave open, but its not working.  These settings can be removed that time to identify exactly what is required to have fixed.

  Windows 7 64-bit Brother MFC-J615W network Scan to Setup

  1 open the windows firewall ports UDP 137, 54925 & 54926

  2. set the read/write for the guests and users permissions

  3. uninstall/reinstall

  4. in CC3 configuration of SCANNING has two tabs; a device and software.  You must pay attention to the directory/s you want to use.

  Now, I am very satisfied with this printer.  This is my first brother and I don't think that the last to the first impression.  I have now this printer works wirelessly with a Ubuntu Netbook Remix, a MacBook 10.5 OS and Windows 7 64-bit.

  * I am also able to scan in PDF without problem.

  See you soon

• ORA-09817: write the file verification failed

  Dear all,
  
  Enter the user name: sys as sysdba
  Enter the password:
  ERROR:
  ORA-09817: write the file verification failed.
  Linux-x86_64 error: 28: no space is available on the device
  Additional information: 12
  ORA-09945: failed to initialize the audit trail file
  Linux-x86_64 error: 28: no space is available on the device
  
  When I m trying to connect to the database I m getting this error.
  
  When I do a df
  
  + / dev/sdf 165139820 158449288 0 /u01 + 100%
  
  Its 100% can all the files I need to remove to connect to the database
  
  I tried to move adump files to another drive as / u01 player say only 100%
  
  I m using 11g it please can someone help me a this.
  
  Thank you and best regards,
  Hiroji gallot

  You should monitor your space... Do not let the problem happened just because you forgot to monitor by simple command (df - h), please mark this thread as answered.

• Error-2625 cannot write the file call node in NI_XML.lvlib:Save.vi

  I get this error when you perform a certain acquisition with a CoolSnap HQ2. The user defines its parameters, then these settings are saved in the file so that they can be easily identified later in the database. The error came to us when we did a test with 4 different parameters. We did: Laser X w / filter X; Laser X w / filter Y. Laser Y w / filter X; Laser Y w / filter Y.

  The first and the third is saved without errors, but the second and fourth receive errors.

  Error-2625 cannot write file call node in NI_XML.lvlibave.vi

  Someone has an idea, what happens? This is the vi I'm talking about.

  I forgot to mention that the name of filter attribute is 593/LP, could the "/" be the cause?

  

  Found the solution. It is indeed the "/" in the name of the filter that caused the problem. I replaced it with a '-' and everything worked

• dialog box: write the file name

  Hello everyone,

  I want to show a dialog box wich ask user write the name of the file before be registered with that name. (See attachment please)

  Thank you ALL,

  Tell him its very simple.

  

  Good luck

• Write the File.vi spreadsheet error hidden 8

  I'm having a problem with writing in the File.vi worksheet. I want to use a spreadsheet file to save temporary data to be accessed at a later date when the program closes. I write in a spreadsheet file, while the program is running, open it and it read it once the program ends, and then write anything in the file to erase all data in the file. The question that I have is during the last entry; If the spreadsheet file is hidden (I would like to be hidden, so it is not deleted, removed, or modified between the execution of program) the vi returns an error.

  error 8 open/create/replace the file in spreadsheet write String.vi-> .vi write to the spreadsheet file (LDM)

  This error does not when writing the actual data in the file only when I write an empty array to erase the file, and it only occurs when the worksheet file is hidden.

  Attached is a good example of what is trying to be accomplished LV2012

  In theory, you can use 'Set Flie Size' to set the OEF to 0.  I have never tried on a hidden file.

• Write the file size limit shared hgfs - Windows guest Linux host

  I'm running an Oracle 6.2 32-bit linux guest under a Windows XP host.  I have a shared folder between Windows and Linux comments host configuration.  The Windows host can store large files (NTFS).  I find that while I can read large files (4 Gb +) shared Linux folder I can't write large files.  Not check the exact figure, but I can not write a 2 GB file, although I can write a smaller file if the basic functionality of shared folder is there and works well.  He comes back with the error there is not enough free space if I try a large file.

  for example, I can get a DVD of 4 GB .iso file in the folder shared Linux loop and see the content but I can't write this file to the folder that is shared by the client.

  This seems to be a limitation of the VMWare tools (I use VMwareTools - 8.6.5 - 621624 to the client).

  Could not find any documentation on this limit - a few other people who have had the same problem.

  Anyone know if there is a documented limitation and if there is a work around?

  CW2 wrote: does anyone know if there is a documented limitation and if there is a work around?

  I normally don't use characteristic VMware shared folders (just to many questions over the years) instead use industry Standard actions SMB/CIFS, because I am anyway in a network industry Standard environment and suggest that he as a solution in your case, if the functionality of VMware shared folders is not offering you need/want performance.

• client_text_io does not write the file but it creates.

  Hello!
  I have a form that generates a .txt file using the webutil client_text_io function.
  This is the procedure:
  
  PROCEDURE CREA_FILE IS
  CLIENT_TEXT_IO MYFILE. TYPE_DE_FICHIER;
  OUTFILE CLIENT_TEXT_IO. TYPE_DE_FICHIER;
  MFILE VARCHAR2 (1000);
  MLINE VARCHAR2 (5000);
  NUMBER OF RESPS;
  
  BEGIN
  MLINE: = 'LINE TO WRITE... '. » ;
  MFILE: = C:\test.txt;
  OUTFILE: = CLIENT_TEXT_IO. FOPEN (MFILE, 'w');
  CLIENT_TEXT_IO.put_line (OUTFILE, MLINE |) '123 ');
  CLIENT_TEXT_IO. Fclose (outfile);
  
  EXCEPTION
  WHILE OTHERS THEN
  CLIENT_TEXT_IO. Fclose (MyFile);
  message (' ERROR: ' |) SQLERRM);
  END;
  
  He works on the OAS 10 g + 10 g of form. the file is created end, BUT I tried with forms 11g unsuccessful.
  My forms 11g are running under weblogic and RedHat server.
  Im running the application forms from my Windows XP laptop.
  
  I configured webutil as note MOS says, is the thing, the file is created, but there is no writted.
  I can open the test.txt file, but the line I tried to print is not there, the same with 10g and the file is good.
  
  Help me please.

  I have solve my problem using this structure:

  PROCEDURE CREA_FILE_TXT IS
  v_file_handle CLIENT_TEXT_IO. TYPE_DE_FICHIER;
  FPATH VARCHAR2 (150): =: CG$ CTRL. ARCHIVO;
  v_string_prov VARCHAR2 (5000): = 'FILE of PROVE. "
  BEGIN
  v_FILE_HANDLE: = CLIENT_TEXT_IO. FOPEN (FPATH, 'W');
  IF CLIENT_TEXT_IO.IS_OPEN (v_FILE_HANDLE) THEN
  CLIENT_TEXT_IO. Put_line (v_FILE_HANDLE, v_string_prov);
  CLIENT_TEXT_IO. FCLOSE (v_FILE_HANDLE);
  message ("CREATED IN :'|| RUTA);
  Synchronize;
  END IF;
  IF this is CLIENT_TEXT_IO.IS_OPEN (v_FILE_HANDLE) THEN
  CLIENT_HOST ("Notepad.exe" |) FPATH);
  ON THE OTHER
  CLIENT_TEXT_IO. FCLOSE (v_FILE_HANDLE);
  END IF;
  END;

  It seems that the clock line is necessary, I don't know why...

  Thank you all.

  Published by: Ingenio December 15, 2011 08:17

• Camileo H10 does not write the files to SD card

  Hello

  I bought a Camileo H10 in December. It's a nice cam, but sometimes I record video in HD format, the file will not be stored on the SD card.

  I tried a class 8 GB 2 and one of 16 GB class 6 SD card. This problem strongly deformed, when I record a video not the first time in the life cycle.

  Another problem is, on the videos, the audio stream is fast. When audio is played, the images run 10% longer than the audio.

  Someone knows, there is a firmware update?

  Thank you

  Stefan

  > sometimes I record video in HD format, the file will not be stored on the SD card.
  First of all you must check if the SD card is not locked SD card supports a lock that you could not format the SD card or store something on this map.
  In addition you should take a look in the user manual and need to check what SD cards are supported!

  > Another problem is on the videos, the audio stream is to fast. When audio is played, the images run 10% longer than the audio. Someone knows, there is a firmware update?

  Why you need a firmware update? Don't you think that it is a firmware issue?
  I think that this has nothing to do with the firmware or a cam problem.
  My father has a HD cam and this issue appeared also with video recording high definition.
  The problem is that your video needs to be converted and you have the right codec

• write the file wav with power button

  Hi all

  I am trying to record a wav file at a push of a button with Auto name files.

  The idea is the VI is running, display data when recording key data are saved as wav up to what the key once again. The file name is generated with the date and time automatically. The user can create as many record as he or she wants without stop the VI.

  As you can guess, I'm not a good labview programmer and I have a problem because my VI does not work properly. The return registered wav file are huge they seem to hold too much data essentially. When I play it back it sounds loop. I understand that the problem is with my VI. Believe me, I've been trying and trying without success. Could someone have a look please and let me know what the problem. I do not understand how to operate the part save my VI.

  Please find attached my VI.

  Thanks in advance for your help.

  Frédéric.

  Yes, our solutions are remarkably similar.

  Be careful to close files when you have finished writing for them - I'm not sure that you have done this. You placed a fence outside the loop that will only close the most recently created file.

  Kind regards

• ORA-09817: write the file verification failed. ORA-09945: failed to initialize one

  Hello gurus,
  
  I am getting error below when I try to connect to the DB. DB version 11.2.0.3, AIX server.
  

  sqlplus / as sysdba
  
  SQL*Plus: Release 11.2.0.3.0 Production on Mon Apr 8 13:08:39 2013
  
  Copyright (c) 1982, 2011, Oracle.  All rights reserved.
  
  ERROR:
  ORA-09817: Write to audit file failed.
  IBM AIX RISC System/6000 Error: 28: No space left on device
  Additional information: 12
  ORA-09945: Unable to initialize the audit trail file
  IBM AIX RISC System/6000 Error: 28: No space left on device

  I went to see that place that has enough space.
  

  Filesystem    GB blocks      Free %Used    Iused %Iused Mounted on
  /dev/var_opt_audit      6.00      4.75   21%   225253    16% /var/opt/oracle/audit

  I don't know what is the problem and I do not see DB process.

  At the level of the operating system, go to each of these directories and do a ls - rtl | tail and ls - rtl | head and, finally, ls-l | WC - l. That should give you an idea of what files are written last, and who is the oldest, and how they are. You can also watch the larger (and you may need to search recursively to find the real directories being written). You will need to decide what to do with them. See your system administrator and ask why she has not followed to use the space.

• "": Blu - ray device error "', '3' Code, note:" CreateStcSequence: cannot write the file of the M25. "

  I get this error message about 11 GB when burning a 22 GB Blu - ray. «Blu - ray error: "device error", the '3' Code, note: "CreateStcSequence: cannot write file M25.»» I tried almost everything as administrator, starting a new project and change the disc. I use CS6 and mad... any ideas?

  It worked for me! I built my project to a blu - ray image, then burned a disk from the image without any problems. Maybe it's that you must try then too!

• create or write the file.

  I'm trying to use this

  http://docs.PhoneGap.com/en/3.3.0/cordova_file_file.MD.html#FileWriter

  but I got the error code 1

  config. XML

  Please help me

  stuck it, when I try android out there is no problem

  Can you confirm that is constant Error Code 1?
  http://docs.PhoneGap.com/en/3.3.0/cordova_file_file.MD.html#FileError

  My guess is NOT_FOUND_ERR or SECURITY_ERR. Using the shared file system? If so, did you add this permission?

  <>ermissions >
  <>Ermit > access_sharedermit >
  ermissions >

  If it still does not work, it would be possible to publish a very basic, Hello World, example here which shows the code you are using? Ideally, a single HTML file / config.xml.

• Write the file using the file adapter

  Hello
  
  I need to write at least two lines. first column and second row headers, data. Tried to use 2 PLs but I think the first line is getting crushed by second.
  
  How can I achieve this?
  
  Pls help me.
  
  Kind regards
  Nikhil

  I don't think you need 2 links from sponsors for this. I should be able to be done. It really comes down to the xsd you create. When you make your mappings for the header just give the constants of fields for the column name

  see you soon
  James

• Write backup files as reading takes place in the event of computer failure

  Hello

  My application involves sometimes to test outdoors.  We have a PC equipment and robust data acquisition.  I'm in the Northeast, where in recent weeks were cold and we had to do a test on the outside.  Long story short, in the middle of the test the computer shut down (probably because it was too cold for the computer according to the data sheet) and I lost all the data from the sensor.  The coomputer works fine BTW when I brought it back inside.

  The reason for which the data have been lost was because the program never completed and so the function that creates the data file has a chance to run.  Now, the data acquisition card, we used is very old and obsolete.  I am trying to upgrade the equipment with components or (PCI-6221) and a box of CSC-2345 with modules for two load cells load cells.  At the same time, I am writing a LabVIEW application that improves the old, obsolete program.

  I want the application to write a file in spreadsheet with all the information of the sensor continuously as the test proceeds in the event of failure of the computer midtest.  In this way, I at least have some saved data.  I explained all this to another engineer here and he says that he cannot make this way at high sampling rates (I want to run the program at 1 kHz for 60 seconds).  His reason was that the writing on file screws up the waveforms that we measure because the file must be opened, the data gets written and then closed for each line of data points.  He argues that the resources of the computer will be linked up as it tries to write the file while the program is data acquisition and store these data in a buffer.

  So my question is: what is the recommended architecture to write a backup file as a test occurs with a high (1 kHz and 10 kHz) sample rate when the computer shuts down or some other failure?  Also, what are the limits of performance when writing data to a file within the same line as the VI 'read '?

  Thank you.

  Rate from 1 to 10 kHz are in fact rather slow. You can use an architecture of producer/consumer to save text files, and there is simply no reason to open and close files permanently. With DAQmx, you can listen directly to the disk at much higher rates.