"": Blu - ray device error "', '3' Code, note:" CreateStcSequence: cannot write the file of the M25. "

Similar Questions

• How to solve this? Blue-ray "device" error, code; 3", notes; "AS_StorageError = 97071.

  I'm on Windows 10, I get this error at 100% resulting from the burning of a reader Blu - ray yet!

  Code 3 AS_StorageError comes in several variants. You will find other reports of your 97071, but not of miracle as such. The best solution is to build an image and burn with ImgBurn.

  All of them seem to have physical storage, hard drive, or media-related questions. Keep in mind that, for Blu - ray, especially, still uses a huge amount of temporary storage.

• 907 COD not valid, cannot import ZIP file

  Hello friends,

  I'm getting "907 invalid COD unable to import ZIP file" error when installing my application on the device.

  I have also the zip file I tried cod, but when I unzip. It remains same as prior COD file. (no change)

  any solution for this?

  problem solved now

• Satellite P770 - 10 p - broken blu ray device

  Hello guys,.

  I have a strange problem for a few weeks.
  My blue ray device is not starting at all - from time to time.
  If it is not starting, it is not in the bioas and also not in windows of course.
  But that, on another day she starts perfectly without problems.

  The Toshiba Power Saver says always optical device: turn off, even if I put on in the toshiba Power Saver and power options.

  Can someone tell me where the DIF can be? Sometimes it works, sometimes not.
  Its really annoying if you can't use any cd or blu - ray...

  Thanks in advance, greet,.
  Qerildan

  It is still problematic to discuss on problems that occur sporadically.
  If the device does not appear in the BIOS there must be a connection problem.

  In my opinion you can not do much, and I think that your machine needs to be checked by the service of Toshiba. Call the nearest service provider for Toshiba, explain the situation and ask for help.

  What else can you do? Check the mechanical connection? I put t know.
  What do you think of all this?

• Device error - sense Code (5-26-00)?

  Hello world...

  Another problem with PrE8.01.  I got this error code: "device error - sense Code (5-26-00) - invalid field in parameter list - general" after media coding and compilation of burn on the disc.  I have a dvd/bluray pioneer (new) engraver who worked before (not with PrE8).  Any suggestion please?

  Ben

  I asked questions and made recommendations in your other thread, so I won't repeat them here.

  For your burning problem:

  1. Looking for an update of the firmware of your player. You described the machine as good as new, it might well be exceeded.
  2. What brand of media you try to burn on?
  3. To a DVD, use the option "burn on the record. This ends?
  4. Play the video (from step 3) in a DVD player software (VLC is good and free if you do not). This play OK?
  5. Burn the file on a DVD using a burning tool stand-a-only (ImgBurn is good and free if you do not). Make sure that you burn not higher than x 4 speed. The burn ends? He plays on a DVD player connected to a TV?

  Post back with your answers please.

  See you soon,.
  --
  Neale
  Insanity is hereditary, get you your children

• Recently I have not been able to burn a CD with Windows Media Player: I get an error message: "Windows Media Player cannot find the file."

  Hello

  I recently haven't been able to burn a CD with Windows Media Player (he worked last week, but not now). I get an error message "Windows Media Player cannot find the file. The link between the library item and its digital media file associated with may be broken. "Try to fix the link or delete the item. There is a web help option which says that to fix a link, you click on the blue icon next to the item, then click "Browse this article. But the only icon I see is a little blue triangle next to individual songs in the library pane or list, there is no icon next to the name of the playlist. Although the click with the right button on the blue triangle gives me a few options, "Browse this point" is not one of them. Does anyone have any ideas what is wrong and how can I sort it please!

  Rick

  original title: burning a CD problems

  Hello

  
  (1) what version of Windows Media Player do you use?
  (2) what is the model of your CD burner?
  (3) you have the latest drivers for the CD burner?
  (4) what type of file you are trying to burn?
  (5) you receive error codes?
  (6) what version of the operating system is installed on the computer?
  (7) we get to a particular file?
   
  
  Method 1: You can try to update the drivers of your CD burner visit the manufactures Web site.
   
  Method 2: You can try to remove the CD, and then insert another CD and try to burn another file and check if the problem persists.
  
  Method 3: You can also check out the link below:

  Windows Help and procedures: burn a CD or DVD in Windows Media Player: frequently asked questions

  I hope this information helps!

• When you try to upgrade Windows Vista to Windows 7 I get this error: "Windows could not retrieve information about the disks on this computer."

  original title: problems of Windows update/upgrade

  I'm currently trying to install Windows 7 on my desktop running Vista.

  Whenever I run the Setup it comes up with the following error: Windows could not retrieve information about the disks on this computer.
  I already put the virtual disk on auto and rebooted several times. I get the same error.
  Also, I tried to update my computer by using the windows update thinking that would help... Windows update decides to not work either! It comes up with the error: Windows Update cannot currently check the updates, because the service is not running. You may have to restart your computer.
  gain, I restarted and it still does not work.
  I am currently running Windows Vista 32 bit on my desk (I thank God for my laptop!).

  Help!

  First, run Windows 7 upgrade advisor:

  Windows 7 Upgrade Advisor
  http://Windows.Microsoft.com/UpgradeAdvisor

  Note the results and make sure to follow the steps.

  Try to install Windows 7 using the USB

  Install Windows 7 with a USB memory key
  http://www.winsupersite.com/article/Windows-7/install-Windows-7-with-a-USB-memory-key

• How to fix the After Effects error - it was not possible to analyze the shape of the mask on the Clipboard

  How can I fix the following error: it was not possible to analyze the shape of the mask on the Clipboard. I have this note when I opened in After effects.

  Mac OS X El Capitan 10.11.4 the end of 2013

  After effects CC 2015.2 version 13.7.2.3

  Thank you.

  Looks like your mask has too many paths of access or summits. Try to turn on caps lock shift before you open the ASP (project file) or before you launch AE. If this does not clear your Cache and preferences. If this does not resolve the problem, we need workflow details that let you to this error.

• I'm not able to install illustrator creative cloud CC. This is the error when I download creative cloud app. "Cannot write the registry value. "Verify permissions, and then try again.

  I'm not able to install illustrator creative cloud CC. This is the error when I download creative cloud app. "Cannot write the registry value. "Verify permissions, and then try again.

  No one can tell you anything without the info adequate system or other technical details, including the exact error message.

  Mylenium

• When Microsoft Excel loads the following error occurs: Error 1406 Setup cannot write the value in the \xlsx registry key.

  I have Windows XP on a PC, I bought at the beginning of 2009.  I have been using Microsoft Office applications with no problems until now.  When I try to open Excel, the following events occur: 1) a presentation box appears and poster - "Please wait while the window configures Microsoft Office Home and Student 2007.  Collection of the required information.   2nd) another box displays the following message: Error 1406 Setup cannot write the value in the \xlsx registry key.  Make sure you have sufficient permissions to access the registry or contact the Support Services technical Microsoft (PSS) for help.  For more information about how to contact PSS, see PSS10R. CHM.
  3rd, the next area said cancel, start over or ignore.   Retry and ignore just redisplays the same message box again.  When I click Cancel, the following error message is displayed - fatal error during installation.   I do not understand why this is happening since 1) I've been using Excel for quite a while and 2) I'm not trying to install office as it was installed on my PC when it came from the manufacturer (Dell).  Also, I have no problem with the opening of other Office programs.  I am the only user on this computer.  Help, please!  Thank you, Dennis

  Okie dokie.

  Well I dug on the web and found someone with the same problem, and they said that when they have disabled "McAfee VirusScan 8.5 Access Protection", this error has disappeared. If this applies to you, give it a whirl if you wish.

  But the best support that I found came from this website: http://support.microsoft.com/kb/838687. The jist of it is (trying to fix it yourself):
  Fix it myself to fix this problem yourself, follow these steps:

  1. Log the computer by using an administrator user account.
  2. Start Microsoft Windows Explorer.
  3. On the Tools menu, click Folder Options.
  4. Click the view tab.
  5. Under hidden files and folders, click Show hidden folders and files.
  6. Clear the Hide extensions for known file types check box, and then click OK.
  7. Open the following folder: C:\Documents and Settings\All Users\Application Data\Microsoft\Office\Data\
  8. If you are running Office 2003, right-click Opa11.dat, and then click Properties. If you are running Office XP, right-click Data.dat, and then click Properties.
  9. Click the Security tab.
  10. Click Advanced.
  11. Click the permissions tab.
  12. Click to select everyone in the list entered permissions and then click change.
  13. Click to select the full control check box.
  14. Click OK three times. If these steps do not resolve this issue, delete the Opa11.dat file or the Data.dat file in the following folder and then restart an Office 2003 program or an Office XP program:
      C:\Documents and Settings\All Users\Application Data\Microsoft\Office\Data

      If this does not work for you, I would take my installation CD< completely="" uninstall="" microsoft="" excel="" (or="" any="" other="" problems="" that="" are="" giving="" you="" this="" error),="" then="" install="" microsoft's="" windows="" installer="" cleanup="" utility="" (which="" completely="" removes="" all="" stuff="" pertaining="" to="" whichever="" program="" you="" delete,="" for="" you,="" excel)="" and="" then="" reinstall="" microsoft="" excel.="" this="" utility="" program="" is="" really="" powerful,="" and="" you="" can="" download="" your="" copy="" from="">http://support.microsoft.com/kb/290301.

      So, here are three options for you to try. I hope one works for you - let me know it to be.

  -Carson

  P.S. - KC Chiefs? Colts all the way! :)

• Error message states that Windows cannot read the Service Notification of system events. Unable to start the computer.

  Original title: System Event Notification Service does not connect.

  Computer will not start.  Error message states that Windows cannot read the Service Notification of system events.

  Hi DACL.

  ·        What is the full error you receive when you try to start the machine?

  ·        You did it all change hardware or software on your machine before this problem?

  You can restore the system to the Windows recovery environment and check if you are able to boot to the desktop. Follow the steps in this link to boot into the Windows recovery environment and select the system restore option.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  Repairs to the system of Windows recovery environment

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• have an error on my computer - Windows cannot load the locally stored profile. Possible causes of this error include insufficient security rights or a corrupt... local profile, what should I do please help

  have an error on my computer - Windows cannot load the locally stored profile.  Possible causes of this error include insufficient security rights or a corrupt... local profile, what should I do please help.

  Hi MelbaIsaiah,

  I suggest you to follow the steps in the article and check if it helps.

  Error message "Windows cannot load your profile because it may be corrupted" when you try to log on Windows XP

  http://support.Microsoft.com/kb/318011

  I hope this helps.

• Cannot read ANY book - even bought. code E_ADEPT_INTERNAL. Cannot remove the authorization/reauthorize with computer: "unable to clear permission. Please try after some time. "Tried for two weeks...

  Cannot read ANY book - even bought. code E_ADEPT_INTERNAL. Cannot remove the authorization/reauthorize with computer: "unable to clear permission. Please try after some time. "Tried for two weeks...

  Windows:

  1. Close all applications.
  2. Click Start > run.
  3. Open, type regedit in the text box and press ENTER. The Registry Editor opens.
  4. In the left pane of the registry editor, locate the following registry key: HKEY_CURRENT_USER\Software\Adobe\Adept
  5. Select the key of the follower.
  6. Choose file > export.
  7. In the export registry file dialog box, select the branch selected under export range. Enter a name and location for the backup registry key, and then click Save.
  8. Right click on the key to the follower, and then choose Remove.
  9. In the dialog box confirm the key deletion, click OK.
  10. Close the registry editor.
  11. Open Adobe Digital Editions and reauthorize.

  Macintosh:

  1. exit the Adobe Digital Editions software.
  2. Navigate to / Users / / Library/Application Support/Adobe/Digital Editions and drag the activation.dat file to the trash.
     If you use 10.7, see library access hidden files. Mac OS 10.7 and later.
  3. Open Adobe Digital Editions and reauthorize.

• I have the macbook pro. I can't open lightroom CC on my macbook pro. Messages of air - "an internal error has occurred. It cannot create the required folder.

  I have the macbook pro. I can't open lightroom CC on my macbook pro. Messages of air - "an internal error has occurred. It cannot create the required file"Please help me. I tried various solutions on the web. None of this has worked.

  Please run repair permissions from disk with disk - Apple Support utility

  ~Assani

• Blu - Ray building error: "invalid format", Code 13 - Please help to diagnose this problem!

  Hi all

  I have a yet simple project that is successfully burning a dvd, image file and the dvd folder.  Now, I want to do the same thing except build the project for a blu - ray release.  (Video files source I have are hi-def).  I don't have a blu - ray burner, but I still want to produce a blu - ray disc image file and a folder of blu - ray disc as in the future when I get a blu - ray burner, I can simply burn the image or folder on the blu - ray disc. I use Encore CS5.5 in windows 7.

  Then, I put the project of construction of blu - ray image file and I get the following error:

  "Blu - ray error:"Invalid Format", Code 13, Note:" errors in some GSP: the end time of the previous display is set on near beginning to succeed all the display, see the log for more information "."  I get the error even though I am trying to build a blu - ray folder.  I also tried this construction project on a Mac (also with CS5.5 Encore), but get the same error.  How can I fix this error, or is anyone know what could be the problem?  the menu of the dvd I have is simple: 2 menus, 1 audio stream, subtitle 1, 1 main video stream and 2 videos of little "trailer".

  (I can sand anyone track log if you want it to)

  Thank you!

  Ricky Roma

  Hi - I think I have fixed the problem.  Basically, I found that some of my subtitles were too close together and so I have separated by 5 images 'standards' apart and all built very well.  We hope in the future if anyone else has this error, they can find this message and try this solution.

  "BTW, does anyone know if the rule of subtitle ' 5 frames apart ' for subtitles adjacent is just one more thing from adobe, or all the professional authoring software require the same thing?

  Thanks for reading this post.

  RickyRoma