writes to the remote server directly utl_tcp or utl_http

Similar Questions

• Help! Save on the remote server has broken links to images

  Well, I (now) know it was a stupid thing to do - but surely there must be an easy way to fix... !?

  I usually have to 'PUT' html on the remote server files, once they have been registered locally. But I keep frustrated all dependency files you download, then... I "discovered" the 'SAVE to REMOTE SERVER' command, and this allows to save my file html directly to the server. I was asked if I wanted to update all the links - and I clicked on YES (doh!)

  Now all my images and links are broken.

  I know it's just a single page-, but it contains a number of links and images. Also, this page uses a template and the images/links from the model content in a file are also broken. (The actual model file and all the other pages of the site are okay)

  'Undo' didn't work

  Does anyone know a quick way to solve this problem?

  I'm using Macromedia Dreamweaver MX 2004

  MANY thanks in advance,

  Rich

  Go in Edition > Preferences > Site >

  Under dependent files, you must have two checkmarks.

  In this way, that you will be asked each time to say YES or NO to the dependent files.

  I hope this helps.

  Nancy O.
  ALT-Web Design & Publishing
  Web | Graphics | Print | Media specialists
  http://ALT-Web.com/
  http://Twitter.com/ALTWEB
  http://ALT-Web.blogspot.com

• Problem with opening of library saved on the remote server. Can anyone advice please?

  I saved the library on the remote server. When I try to open it, I get the following message:

  "Libraries cannot be saved to this location. . The format of the selected hard drive or network volume is not supported. Select another location. »

  Can anyone help please?

  I don't think I have made it clear that the problem is with iMovie on iMac ElCapitan 10.11.3 running. Thank you

• What are the network requirements for the remote server of the Panel?

  What are the network requirements for the remote server of the Panel?

  I tried for awhile now to set up a Control Board.  I can connect to my remote panel of computers from other computers on my local network but nowhere else.

  Whenever I use web publishing tool gives me a URL in this format: Http://Computer-Name.Corporate-Name.local:8086 / VI - nom.html apparently it means I have a local DNS server and this URL is meaningless to the public.

  When I try to connect with the Operate > Connect to... remote control, I get this error message:

  "Connection to Server remote panel...".
  "Connection refused by the server remote control specified: make sure that the LabVIEW Web server is enabled on the specified server.

  I got the same error when I tried to host a remote panel from my laptop at home, on my Wi - Fi.  Is there some network settings or firewall I'm not seting?  Would it be my server or the router or the private network?

  My goal is to be able to host remote panels of my laptop while I'm on the international scene, creating using 4 G internet mobile.  Is it still feasible?

  As he Turners on my router had to be put in place so that my Port is in the rage of transfer.  Also I had to disable DHCP.  Without that you cannot host behind a router.

  These are the instructions I put fallow:http://digital.ni.com/public.nsf/allkb/B1E9A3D78BAED949862573AD0065D4D2

• "Error 638: the remote server is unresponsive in a timely way", when I try to connect to the Internet.

  Title: "error 638: the remote server is unresponsive in a timely way." What in the world is that supposed to mean?

  I have known the above error (for 2 weeks now) whenever I try to connect to the internet via modem huawei e160. I have not installed any programs recently. I physically contacted my ISP and according to them, the modem works properly and that the problem is with my computer. A professional COMPUTER friend told me that he once experienced a similar problem and the solution in the end was re - install the operating system. I did as much with PC to get back that far. Someone please help coz it is a nightmare.

  I had the same problem. And just uncheck the 'Operator operator-assisted' Option on the "Advanced" tab in the window 'Manage settings of the map' did the job. Try it. You will surely succeed.

• Windows Media Center - not the initial download put in place data for guide "unable to connect to the remote server.

  Hello

  Looking for help on this one...

  I have a new install of windows 7 pro running, and I was not able to get the guide to download Windows Media Center.   I am up-to-date with all the updates and SP1 version running.   My video card drivers are also updated.

  I use HDHOMERUN PRIME equipment with cablecard and who receives a TV signal very well and I am able to view it in WMC.    I use Verizon FIOS and my zip code is 07452.    Before this computer, I ran the cablecard even with a ceton infinitv and had no problem Guide at all.

  It's just that I can't download the guide data.  Its just totally blank.   I receive the channels and view them, but there is NO data.      Whenever I run the TV setup the same question comes up.  Cannot download the initial configuration data due to the error of previous download.   As far as I know, there is NO error message when Windows installed... actually... I reinstalled windows completely and this has not solved the problem.    I tried to manually download the guide which did not help.   It... nothing happened when I turned 'on' and 'off' WMC in Control Panel to reinstall.  I even tried explore the ehome folder and remove the file db... but nothing is helping.

  I can't find a file mcupdate.exe light on my system - don't know if this is relevant.   When I looked in the event viewer here are some of the error messages that I see.

  Impossible to extract the EpgLineups (error: unable to connect to the remote server)
  Impossible to extract the MCEClientUX (error: unable to connect to the remote server)

  I'm starting to think it's a matter of windows.   Anyone have any ideas?

  Mark

  E-mail address is removed from the privacy *.

  On Tuesday, September 23, 2014 00:32:35 + 0000, Mark_Sap_70 wrote:
   
  > I'm starting to think it's a matter of windows.   Anyone have any ideas?
   
  See this thread
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/is-the-Media-Center-Guide-download-service-down/f0a5ae10-00ea-4635-9177-12074fa7ee81?msgId=87f3f3b5-A485-4c41-8f35-43a4e2a75d7c
   
   
   
  __________________________________________________________________________________________________
  Barb
  MVP Windows Entertainment and connected home
  My Blog - http://digitalmediaphile.com/
   
  Please mark as answer if that answers your question
   
   
   

• connect to the remote server

  Hello friend

  Pls help
  Given below to other site, ip address of the server 172.16.5.10 and public IP address 41.59.251.X, I need to create the tunnel so that my
  Server with the ip 172.17.18.41 and my public IP 41.59.251.Y must be able to communicate with the remote server which is

  172.16.5.10
  What is the way forward? my server ip address 172.17.18.41 mask 255.255.255.33

  -3des encryption
  -Md5 hash
  -Preshared authentication
  -Group 2
  Pre-shared key 66@#fgk
  -Public IP 41.59.251.X
  -ip address of the server 172.16.5.10 (he is 27 subnet)

  Is what I want to implement, help the routing between two networks and access-list for only two servers to talk to pls

  crypto ISAKMP policy 30
  BA 3des
  md5 hash
  preshared authentication
  Group 2
  ISAKMP crypto key 66@#fgk address 41.59.251.X
  Crypto ipsec transform-set STRONG esp-3des esp-md5-hmac
  JOE 30 ipsec-isakmp crypto map
  set of peer 41.59.251.X
  86400 seconds, life of security association set
  transformation-STRONG game
  PFS group2 Set
  match address 140

  access-list allow 140
  IP route

  interface GigabitEthernet0/1
  Description CONNECTION to ISP
  IP 10.17.50.1 255.255.255.252
  IP virtual-reassembly
  automatic duplex
  automatic speed
  JOE crypto card

  Joe

  En to encrypt traffic must match the access list, and it must match the list of access on the other side.

  The easiest would be to ask the person manageing the router on the other side to send you the configuration, otherwise it's just a guess how this access list must be configured.

• How to create a file of data to the remote server...

  I need to create the data to the remote server file...

  When I tried to create using the command

  create tablespace XXXC_DATA Datafile

  ' \\1XX. XX. X.XXX\TestSVR_Share\CCC\oracle\Datafiles\CCC_DATA. DBF'

  size 10 m

  autoextend on

  next 10 m

  MaxSize unlimited;

  

  I checked the local policies.

  (I am an admin user and I added 1) access this computer from the network 2) Act as part of operating system and update of local policies

  It did not work.

  so I've mapped the shared location and run ogical below command

  create tablespace XXXC_DATA Datafile

  ' Z:\TestSVR_Share\CCC\oracle\Datafiles\CCC_DATA. DBF'

  size 10 m

  autoextend on

  next 10 m

  MaxSize unlimited;

  

  Can anyone help on this.

  It does not matter if * you * have access to this shared directory. This is important if the user used to run Oracle.

  When you access the Services application in Windows (I assume you are the DB on Windows), double-click the Oracle service for the database in question and go to the tab "Log On", it is * that * the user who must have access to the directory is shared. If you have "Local System" set as a user, you will need to change this.

• invoke VMScript unable to connect to the remote server

  I have two PCs, two win 7 x 64. PC1 has powercli 5.5 build 3142196 (5.5u2?) and the other who has now updated 6.0.0.7857 (last AFAIK) via VMware PowerCLI - 6.0.0 - 3205540.exe from the downloads section.

  On PC1, I can run the script

  invoke vmscript - ScriptText '(gwmi_win32_computersystem).manufacturer - like ' * vmware * "'-ToolsWaitSecs 45 - VM VMName - guestuser guestacct - guestpassword blablabla".

  and it works very well and gives me a result.

  If I run the same command on PC1, I get the error:

  Invoke-VMScript: 16/11/2015-18:32:01 VMScript Invoke cannot connect to the remote server

  on line: 1 char: 1

  + Call VMScript - ScriptText '(gwmi_win32_computersystem).manufacturer - like ' * vm...»

  + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  + CategoryInfo: NotSpecified: (:)) [invoking-VMScript], ViError)

  + FullyQualifiedErrorId: Client20_VmGuestServiceImpl_DownloadFileFromGuest_DownloadError, VMware.VimAutomation.ViCore.Cmdlets.Commands.InvokeVmScript

  Anyone encountered this before? I see no difference in the PC it would cause and I wonder if there are logs, etc. for troubleshooting, I'm not aware of. The message is a bit lacking in detail. Probably the client must connect something.

  Thank you!

  The client when you run the Invoke-VMScript cmdlet on must actually be able to connect to the physical ESXi host on which the virtual computer runs on port 443. Are two clients on the same subnet, you have a firewall between the hosts and guests? Just try to open the ESXi host welcome page in a browser from these two clients, e.g. https://myesxihost.local/

• Select the remote server to download files.

  With the help of CS5.5 I am unable to put files on my test server, except if the remote server is selected. He said: "before using this feature, you must set up a remote server. You want to book one now? ".

  If I check the remote server, I am able to upload files to the test server, also download the remote server that is BAD, I'm just testing and redesigning the site.

  I found another thread saying to remove the site, I did; Nothing helps.

  If I do not select a remote server I'm unable to download and to remodel the site.

  How do you have on this?

  Managed to fix it I made my server under servers model > advanced > server model has been configured for PHP MySQL.

• ColdFusion CFFTP copy of the file from the remote server and save to a local folder with the same file name

  Is it possible to copy a file from a remote ftp server to a local folder, while retaining the original file name? Please note: the file name on the remote server is not always the same.

  This article from Adobe might be useful.  (I was tempted to use LMGTFY; but I do not have).

  V/r,

  ^_^

• CSS style sheet appears on the remote server when I download my Web site, but it works very well to the local server

  CSS style sheet appears on the remote server when I download my Web site, but it works very well to the local server, if anyone can help I would be grateful.

  There are major problems with this page as shown in the screenshot below.

  

  This is caused by a liberal hijacking of APDivs (aka layers) for a main page layout.  This isn't what APDivs were intended.  That's why Adobe them removed from DW.  Unfortunately, not soon enough.

  I think you're the best option is to start over with a pre-built CSS layout that doesn't contain positioned elements.

  Either way, Flash is dead now.  Most of the people cannot display Flash media more.  You can convert the HTML5 video or use YouTube to host videos now.

  Nancy O.

• Can't export virtual machines: unable to connect to the remote server

  Hello

  I'm working on vSphere client 5.1 (vCenter Server 5.1). Trying to export a virtual machine for distribution model. When I go to file-> export the template OVF..., I get the following error message:

  Can't export virtual machines: unable to connect to the remote server

  Remote not sure what/who he is not able to connect to. If I connect vSphere Web Client and navigate to the same model (or all other models), under 'All the Actions of vCenter' I don't have an option to export to the model of the FVO. But if I use a VM machine instead of a virtual machine template, I have the ability to export to the OVF, but it is grayed out.

  Am I missing any customer authorization or plugin for vShpere?

  Discovered that vSphere server had some modifications made by HIM to resolve the violation POODLE. HE had to set the ip address of the machine where export OVF will be performed. Which allowed the connection to establish vsphere client and perform an export of the FVO.

• SRM 5.5 - the remote server returned an error: (503) server unavailable, could not create SSL/TLS secure channel

  Design:

  2 vCenter VMs version 5.5 on new W2k12. x. related and the same use facilities key SSO (default installation)

  2 x fresh install of the SRM VMs version 5.5

  20 + hosts vSphere 5.5 with DR/HA configured and working. Two dvSwitches (one per site) configured with the groups of port / VLAN work

  Question:

  Installation goes well until I needed to activate the Plugin SRM in vCenter.  Plugin called "Plug-ins available" and I click on the link 'download and install '.

  I had two separate fouls on both servers vCenter, both with same errors if it is compatible.

  Errors:

  (attached file viclient-3 - 000.log)

  The request has been aborted: could not create SSL/TLS secure channel.

  (attached file viclient-3 - 000.log)

  The remote server returned an error: (503) server unavailable

  I guess that the two are linked and probably something with SSO.  Post installation on each server vCenter vCenter, at the level of the vCenter, I added the "Domain Admins" AD Group with all permissions and then properly connected and built the group with this set of credentials.

  I need help to debug this further.

  Thank you

  ************

  < < Updated > >

  Seems the features and functions are NOT present so you don't not sign in as '[email protected]' (SSO account by default for this "basic" configuration)

  But even with this connection, I have noticed that there is NO option in the webclient service, to perform the installation of a vCenter plug-in.  It does not appear in the vSphere Client (see images).

  I also found it weird that the web client to vCenter illustrates SRM roles but the traditional client does not work.

  Maybe it's a clue to the root cause of...

  Post edited by: ArrowSIVAC 2013-10-07 to provide more details and attachments

  Post edited by: ArrowSIVAC, this is related to the case of support for vmware 13384832210 This problem is solved.  Several pieces here. (1) vCenters were installed secretly with local account as own databases, and this is how I usually do things (2) MRS. servers were built as separate virtual machines, VMWare vs guides guess and documents in anticipation of your SRM installation on the same server as vCenter Documentation / Installer is not clarified that you MUST use domain for MRS accounts in the multiplayer linked site facilities and if you do not, the installation is completed without error, but resources will not work. Errors have for client plugin does not work. It was the symptom, the reason was that the SRM service did not work.  The service would not start and only an error in the Windows event log is 'vmware-dr stopped service' is because the connectivity issue of MRS to vCenter hosted the new SQL instance database SRM. The SRM database has been installed on the instance of vCenter server as vCenter database.  And just like the installation of default vCenter I chose localhost\administrator for database owner.  The database was filled with tables, but SRM has connectivity problems.   The fix for this was to add "domain\user" (called mine SRMAdmin and added as a member of domain admin), add this user in SQL in the list of database users and then promoted as the owner of SRM database and define the rights on DBO. This fixed the first issue. Second issue was that SRM installation set the DSN system identification information, but does not specify that they must also be domain based accounts.  The installation program is not not clear here and should only allow user domain\username when installing. After several attempts because of the root and installation methods different tried, how to get the installation complete and properly configure was to log on to the system AS the example domain account: domain\srmadmin = > Configuration System DSN by selecting "How should SQL Server verify the authenticity of the login ID?"  "with integrated Windows authentication', and then the installation of SRM to the"Enter Database user credentials"value"domain\srmadmin ".  Then and communication services to the vCenter SRM hosted DB database will work correctly. < See images attached benchmarks >

  attached files

• Folder on the remote server that is not recognized by Dreamweaver as part of the site

  I run the site of a school district. This includes the home pages and associated pages for all but one of our schools. School files were headed by a teacher of this school's web design. This professor has left, and I was asked to perform some updates on the site from high school up to what a new teacher was hired and able to take charge. My problem is that the folder containing all the files of high schools is one of the many issues in the Group of largest school district, the folders on the remote server, my Dreamweaver does not see. I can use Windows Explorer to find the folder and it's there. I can use a tool such as Notepad ++ to open the files and make changes. They are here and I can visit her profile. But for some reason any Dreamweaver doesn't recognize them not as part of my site. I can't 'get' file, or a synchronization because Dreamweaver does not see this folder on the remote server. I think it's a matter of Dreamweaver, but I don't know how to fix it.

  Thanks for all your suggestions. I'm home now and remembering that I'm working on the site of the House and at work, I realized that I can see the folder of the secondary school on the remote server of the House where I have Dreamweaver to connect via FTP. I can't see it on my computer at work where I connect to the remote server through a local/network connection. There may be a clue here. If I switch to a FTP connection to work, maybe I see the folder.

  UPDATE: I changed the type of connection on my computer work of local/network, FTP and high school record is now visible on the remote control. Don't know why it makes a difference, or if this will lead to new questions, but I'm good for now.