Writing math graphically with the TX 1000

Similar Questions

• problem with writing a procedure with the name of the table as an input parameter

  Hi all
  
  I am writing a procedure with the table name as input parameter:
  Here is the code
  
  create or replace procedure CEP (in_tbl in varchar2)
  as
  Start
  
  run immediately 'truncate table tlb;
  
  Insert into tbl
  
  Select a, b, c of in_tbl;
  
  end;

  user579585 wrote:
  Hi all

  I am writing a procedure with the table name as input parameter:
  Here is the code

  create or replace procedure CEP (in_tbl in varchar2)
  as
  Start

  run immediately 'truncate table tlb;

  Insert into tbl

  Select a, b, c of in_tbl;

  end;

  You will also need to use dynamic sql for insert statements:

  execute immediate 'begin insert into tbl select a,b,c from '||in_tbl||'; end';
  

• Map graphic with the driver that supports openGL3.1 or newer.

  Hello

  I installed the latest version of Autocad 2014 on Windows 7 (64 bit) and when I launched the program, asked me to update the driver for my VGA as this message below.

  

  However, when I went to the homepage of my Acer, and then looked for all the drivers/later for Windows 7 (64 bit), I has not found any drivers for graphics at all.

  

  Besides, when I installed the 2013 AutoCAD version, I didn't face graphics card update errors.

  Is my graphics card Mobile Intel (r) 965 Express chipset Family (Microsoft Corporation - WDDM1.1)
  X 3100.

  Product level 1:	Laptop
  Product level 2:	Extensa
  Product level 3:	Extensa 5220

  An excerpt from "Extensa" 5220 quick Spec:

  "Mobile Intel® GL960 Express Chipset with integrated 3D
  graphics, with Intel® Graphics Media Accelerator
  (GMA) X 3100 up to 358/3843 MB of Intel® Dynamic
  Video Memory Technology 4.0 (8 MB of system dedicated
  memory, up to 350/3763 MB of shared system memory)
  "supporting Microsoft® DirectX® 9 and DirectX® 10 ''

  You can view the document here:

  http://multi.GNT.lt/pages/brochures/Acer/EX5220qs.PDF

  As no physical card is present, it is not possible to change. Your graphics card is part of the motherboard chipset.

  Remember, your first laptop appeared ~ 7 years now - back in 2007 I believe. It can simply be a little too much trouble to wait for him to manage current requirements.

• Writing a file with the file system

  I'm trying to export a file in javascript and write it in the retentive memory.

  I use 2 WebWorks (BB10.2) and the plugin 'com.blackberry.io '.

  I am able to access the file system

  window.requestFileSystem (window. PERSISTENT, 0, {function (fileSystem)
  fileSystem.root.getFile (sFile, {create: true}, {(fileEntry) function)
  Console.log ("Cordova about to create the writer of the entry in the file");

  Console.log (JSON.stringify (fileEntry));
  fileEntry.createWriter ({function (writer)
  Console.log ("Cordova about to write to the file");

  Writer.onwrite = function (evt) {}
  Console.log ("write successful:" + fileEntry.fullPath);
  Alert (fileEntry.FullPath);
  };

  I'm sorry that my original post has seemed to be cut short.

  The problem is when the call actually:

  Writer.Write (new Blob ([surlabasedesdonneesdufabricantduballast], {type: "text/csv;})) charset = utf - 8 "}));

  I discovered also for what was causing the problem. The debugger on the pc seems to interfere with the process. As soon as I removed the breakpoints it started working.

• How to create graphics with the constructor syntax

  How you can use the XXXBuilder class to generate graphs? I have this code:

  NumberAxis xa = NumberAxisBuilder.create().lowerBound(0.0).upperBound(10.0).build();
  NumberAxis ya = NumberAxisBuilder.create().lowerBound(-10.0).upperBound(10.0).build();
  ScatterChart<Number, Number> chart = ScatterChartBuilder.create().XAxis(xa).YAxis(ya).build();

  But I get:
  error: the reference to create is ambiguous, the method create() in RegionBuilder and < X, Y > method create() in ScatterChartBuilder match
  ScatterChart < number >, table = ScatterChartBuilder.create (). XAxis (xa). YAxis (ya) infrastructure ();
  ^
  where X, Y are variables of type:
  X extends the object declared in the < X, Y > method create()
  It extends the object declared in the < X, Y > method create()
  
  How can I resolve the ambiguity?
  
  Pete
  (it's 1.7.0_06 JDK, JavaFX 2.2.0 - b21)

  Probably a bug in the ChartBuilders or the JDK.

  ScatterChartBuilder.create().build(); // does not work either.
  

  javac is unable to determine if the create() method of SceneChartBuilder or the create() method of RegionBuilder must be applied.
  The AxisBuilders arising also from RegionBuilder work because they do not identify their own obscure create with generic type information method.

  How can I resolve the ambiguity?

  New ScatterChart ;-)

• print or export created runtime of vector graphics with the intact alpha values

  I want to be able to save state generated dynamically to a SWF as a vector image. I know that I can right click on the swf file and print to PDF using the Adobe pdf printer driver. It works well, but all the alpha values are lost. Anyone know how to print a pdf or other vector format file and retain the alpha values? Pdf format it supports clearly I can save objects with alpha in Illustrator to PDF without problem values.

  Any alternative that archives this result would be welcome for example save runtime swf via actionscript in swf format or format Illustrator etc.

  Thank you

  Hi all

  Flash Pro CC 2014 (v14.0.0.110) is now available for download via the Web App Cloud and Adobe Creative site.

  We have added the function Export SVG to Flash Pro with this new version. You will now be able to export the contents of the vector of the image selected as an SVG image, which can be opened directly in a browser and even imported into Adobe Illustrator.

  Option to Export SVG are accessed through the parameters of publication as well as via the Menu file > export > export Image option.

  Alongside this, we have added several new features in this release. The complete list is available on these links:

  Overview: https://www.adobe.com/in/products/flash.html

  Whats new: https://helpx.Adobe.com/Flash/using/whats-new.html

  Release notes: https://helpx.adobe.com/flash/release-note/flash-professional-cc-2014.html

  Thank you

  Mabrouk

• Compatible with the 1000 ElitePad pens

  Pen Executive H4E45AA has worked with the ElitePad 900.  There's a new pen, #F3G73UT, which is compatible with the ElitePad 1000, but the older pen, the H4E45AA, will work with the new ElitePad 1000?

  I work for HP

  No, the Executive pen for the 900 ElitePad will not work with the ElitePad 1000.  The digitizer in the 1000 ElitePad is designed to work with the new support of function stylus point Windows 8.1 and leaves behind for compatibility with the old design of stylus.  For example, here is the reference to the characteristics of the Executive pen for 1000 ElitePad description:

  "Support for the hover of the characteristic sensitivity levels and pressure up to 256".

• With the help of NumberFormatter with graphics

  I try to use the NumberFormatter with graphics (with the HTTPService data source)
  
  The numbers are used for the x-axis or the linear axis, coming from an XMLList, i.e.
  
  "< displayName ="Project"xField="@hours mx:BarSeries ".
  
  How can I put a version formatted for @hours instead of just raw unformatted numbers? For example I want to insert a comma to show '12 000' instead of '12000 '.
  
  I have figured out how to make a function to format / change string variables, for example names etc., in a certain measure, but cannot get the numberFormatter to work.
  
  I created this function:
  
  < mx:NumberFormatter id = "numForm" useThousandsSeparator = "true" / >
  
  But I can't understand how to integrate it into the numbers in my DataGrid or on my paintings.
  
  I found a few web examples covering NumberFormatter...
  
  http://livedocs.Adobe.com/Flex/3/HTML/Help.HTML?content=charts_formatting_13.html
  http://livedocs.Adobe.com/Flex/3/HTML/Help.HTML?content=formatters_4.html
  http://blog.flexexamples.com/2007/12/13/rounding-numbers-in-Flex-using-the-NumberFormatter - class.
  
  .. but they are not access data from external sources, and I can't adapt the code for working with graphics.
  
  Any help would be much appreciated.
  
  M.

  This site is a good example to do it in a datagrid

  http://blog.flexexamples.com/2007/08/20/formatting-a-Flex-DataGrid-control-using-a-custom--Convertisseur element.

• To avoid writing code with the front-end database

  Hello
  
  I'm working on a database application using database 10 g as backend and front-end dotnet. I want to run only oracle stored procedure to select all (to avoid the hard parse and use bind variable), operations DDL and DML. just to avoid writing code database with the front-end server. Can someone give me please a little examples of:
  
  1. Select the output of the query to be returned in the result set of the stored procedure.
  
  2. DML for example of stored procedure.
  
  3. stored procedure DDL examples.
  
  using scott.emp, so that I just called the stored procedure, rather than selecting on the don, DML or DDL commands at the front end. Even though I read in the documentation, but a cup examples will help me to enter a clear concept as well.
  
  Thanks and greetings
  Girish Sharma

  Hello...

  --> Select example
  create or replace procedure get_emp (rc on sys_refcursor)
  is
  Start
  Open rc to select * from emp;
  end;

  --> Example of DML
  create or replace procedure do_dml_emp (pempid in number,
  pempname varchar2,
  Result number)
  is
  Start

  insert into emp(empid,empname) values(pempid,pempname) return empid as a result;
  exception
  while others then
  result: =-1;
  end;

  --> Example of DDL
  create or replace procedure ddl_emp (varchar2 column name,
  ColType varchar2,
  Result number)
  is
  Start
  result: =-1;
  run immediately 'alter table emp add column' | colname | ' ' || ColType;
  result: = 1;
  end;

• Manager tasks shows only 4 graphics on the performance tab when it should display 8 for 3770 K & Win7 x 64

  When I open the performance tab of Task Manager I see that 4 graphs (showing the CPU core activity) instead of the 8 that I would see with a 4 core with hyper-threading processor. I have unplugged and plugged into the CPU 8 power connector pins several times and once I could see 8 graphics for about an hour until what he returned to only 4. Since then, I don't me 8 graphics no matter what I do. I replaced the MB, CPU, memory and power separately, but he never makes no difference.

  My father has a Dell with a 3770 and his task as managing only shows 4 graphics.

  I have an Asus P8Z77 - V Pro MB, i7 - 3770K, 16 GB Corsair Memory (2x8GB) CL9, PSU Corsair HX850 gold and Win 7Pro x 64. My father has a Dell with the same processor, but different everything (he has Win 7 HP x 64).

  4 graphics that appear are for 2 cores with hyperthreading. I can tell because Aida64 says only 2 hearts are running. I also only 4 graphics with the ASUS AI Suite 2 program.

  Windows is set to mode performance and no power saving features are enabled in Windows or the UEFI.

  Can someone tell me what is happening? How can I get 8 graphics is displayed all the time?

  Thank you

  Bruce

  Hi Bruce,

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/w7itprohardware/threads

  Hope this information helps.

• 10.1.2 iMovie crashes while editing. Failed attempts to re - open. Open with the option key down key allows you to delete the preferences but contains a relative error incompatible graphics card will then appear.  With the help of El Capitan

  iMovie 10.1.2 falls down during editing of a film, usually by doing something like adding a title or a transition.  Failed attempts to restart.  Try to reboot with the option key + command allow you to remove preferences.  Then either receive an error indicating that the graphics card is incompatible or the application block requiring a force quite.  Restart or stop the iMac translates the suspended system requiring a manual stop holding down the Start button.  Restart in Safe Mode and then the normal startup will allow iMovie to load.  But after a few minutes of work with the program, it crashes and scenario again.  I use El Capitan 10.5.11 on an iMac of 2013.  I deleted the iMovie app and reloaded it, no change.  Someone has an idea for a fix?

  What are the specifications of your clips you want to change? Try to create a new user and see if FCPX is behaving.

• delays when writing with the pec in Portege M200

  I face a very obvious slow in exercising the hand writing in tablet mode.
  usually, I write "with a single note" and writing is instantly displayed in normal writing on paper.
  but when I tilt the screen to be in tablet mode, what I write is not displayed unless I finished the whole word, and display is normally extremely slow.
  Although if I tilt the screen to normal laptop mode "with the same session a note" the speed is back to normal.
  Please notify.

  Hello
  I ve tried to simulate your problem with my M200

  I couldn't see a Performance distinction between modes of Tablet PC and the PC Normal.

  Could it be that you´re by using the Tablet PC Modus in battery operation?
  Then of course as a result of the power management the M200 runs slower.

  Good bye

• Problem with the latest graphics drivers Intel 82830 M graphics Satellite 1100

  I have a 1100 Satellite with the Intel 82830 M graphics card. The latest driver is version 14.7 which I just installed - icon of graph in the right lower corner of a multicolored square changes a blue screen when you install this, and the mouseover text says "Intel(r) Extreme Graphics.

  However, since installing it, my screen freezes everytime I start a game, or if I go into display properties & change anything. A hard reboot is required. Also, the startup process takes 2 - 3 times as long since this upgrade.

  Everyone knows about this problem? Does anyone know of a solution? I've seen a few posts on other forums about this, including some say that this problem came from XP Service Pack 2. Can anyone confirm this?

  Hello

  I assume that you have installed the driver for graphics card on the Intel site and you do NOT use a graphic driver Toshiba, which has been designed especially for the use of the laptop.
  Well, Toshiba recommend that you use the drivers from Toshiba. In this case, you should try to use the recommended graphic driver that you can download from the Toshiba driver page.

• Problems with the graphics to Equium A60 driver

  Hello everyone,

  First sorry for my bad English.

  I have some problems with my graphics card driver. After a new installation, I wanted to just install the driver for the ATI Radeon 7000 (I have an Equium A60), after that, I noticed that my pc was down. The problem was because the driver, I'm sure, because after a fresh install, without the drive VGA, my laptop works, somehow... I mean, I don't know it might work if the graphics would have a clean driver better.

  I searched on the web and saw that it was not a new problem; many people have the same problem with it. Somehow, the driver of the computer is not compatible.
  Could someone help me find a solution to my problem?
  Thank you very much

  Eurytheus

  Sorry my friend, but your ad looks really amazing. Driver Toshiba of origin is not compatible with the hardware. It cannot be. It cannot be the truth!

  Your model of laptop is almost 4 years and I assume that Toshiba had enough time to react if the display driver is somewhat problematic. I recommend you to backup all your data and try to install your laptop using original recovery image. If there is no hardware problem notebook should work again well.

  Sorry, but I don't see another solution because the pilot is certainly tested and it should work.

• Problems with the graphics card on Satellite Pro M10

  Hi, this is my first post on the forum. I'm not a pro with computers or anything... the problem I have with my laptop is similar to the one in this thread:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=26849&TSTART=0

  I spent half the day trying to figure out if my graphics card is broken, but since I'm a newbie with this stuff, I'm still not sure. :(

  This is what makes my M10. I'm trying to describe the symptoms that detailed as possible, but I'm German, so please excuse my lack of words in some places.

  1. when I turn it on, the laptop goes through the BIOS and give me scrambled BACK-screens and a slightly Warped windows loading bar. There is the consistency check, marked by black bars connecting the top of the screen down. After the audit, the screen goes black and nothing happens, or the screen of will just show me consistency check, do nothing. Be that as it may, I have to turn off the power (I think) and restart the laptop.

  2. sometimes the laptop goes through the BIOS checking & conistency with a few graphical shortcomings. The office is anything but shredded when he gets to the screen of the Windows user. The static method is if serious I don't even know where is the button turn off.

  3. sometimes Notepad starts very well, with the only graphic problem being the windows loading bar. When I go into Windows, the laptop pulls me a blue screen and stops immediately.

  4. sometimes, the laptop works fine for about an hour or two. After I rebooted, I have the same problems listed above, once again.

  5. If I open Device Manager and disable the graphics card, the laptop works very well. I have to lower the screen resolution and colors, but I can watch videos on youtube and everything. Finally, the laptop gets very hot on the bottom and the screen goes crazy again, so I turn the damn thing off.

  I don't know what that means! If my graphics card is broken, the screen should be all static, ALL the time? Not just sometimes more,... could sometimes less be some sort of communication problem between the graphics card and cpu? Please help me with this!

  Another thing I'm not sure about, even after reading the thread I linked above - can I replace the graphics card or not? Everyone said something different in the other thread...

  see you soon,
  Cozmo

  Edit: maybe I will add when I got the screen scrambled and everything. I installed Civilization 4, just to check if my satellite pro can handle, and everything went well for a while. The screen then haywire and I rebuilt my whole system, but display problems did not disappear completely. They were gone for almost a month, and now they are 'back' or something.

  Hi Cozmo

  I'm not a technician but here nobody needs technical knowledge to see that there certainly is hardware problem. I also believe that this problem occurs due to the graphics card. Graphics card is part of the motherboard and it cannot be traded separately. The entire motherboard must be exchanged.

  In my opinion, you have two options: either contact the authorized service provider in your country and speak with them, what can be done, or try to get the motherboard used. If you are lucky, you can find it on eBay. I already bought several hardware components for my old Satellite P10 on eBay.

  Sorry Cozmo but I do not see any other logical solution for you.

  Good luck!