Writing rounded business rule using Calc Manager

Similar Questions

• How to migrate EAS Business Rules for Calc Manager in 11.1.2.1 (without using EPMA)

  Hi all

  for the moment, we are on 11.1.2.1 and one more late upgrade scheduled to 11.1.2.3, use Calc Manager rather than the rules Business (EAS). Therefore, I would like to upgrade to business at Calc Manager rules, but without using EPMA (we would still use the classic Planning Administration). I read several documents and sites, but I was unable to find a way to do... Does anyone have a how or documentation about my problem?

  Thank you very much

  André

  P.S.: Maybe to make it a bit clearer: I won't spend 11.1.2.1 to 11.1.2.2. I would only use Calc Manager instead of business EAS rules 11.1.2.1 and I couldn't find anything that shows how or if it is possible to migrate from the business rules to Calc Manager (without using EPMA).

  You can change the method of calculation of the Manager of Calc application. I replied to your message in the Manager area of Calc.

  Concerning

  Celvin

• Not able to open the designer of the rule in Calc Manager in the workspace

  I installed Hyperion 11.1.2.2 on Win2003 sp2. My version of IE is 7. When I try to write/modify a business rule in the calc Manager, I get a warning "your current security settings don't allow websites to use ActiveX ie7... "Your page may not display correctly. I tried every setting in Internet Explorer to get this message across, but it doesn't. All the world faces this problem and what is the solution.

  Hello

  You will probably have to have Flash plugin (Yes it's kind of ridiculous that most of us use Calc Manager just to write calc scripts), but this is probably the reason why, I came across it last month. No idea if a recent version of the Flash plug-in for Win2003.

  Or just use a browser (Firefox or IE. recent 8/9 on a client of work instead of working directly on the server

  Good luck!
  JM

• Security rules in Calc Manager vs EAS

  Maybe I'm missing something, but what happened to the ability to put safety on the rules now that we use Calc Manager for our applications of EPMA? In EAS Business Rules, we could all our privileges assigned to the rule, but now it seems that there is no security. What Miss me? Thank you.

  Push the State for planning, and then set security in planning (Administration > business security rule)

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• How do we take a scheduled backup of the business rules of calculation Manager 11.1.1.3?

  How do we take a scheduled backup of the business rules of calculation Manager 11.1.1.3?

  Hi Celvin,

  We have to implement something like the utility formdefutil for Web Forms. LCM is an option, however, and we are looking for all the utilities. Please let us know is it is

  Thanks for your help!

• rules using calculation Manager

  Hi experts,
  
  pls kindly explain these issues:
  1. which is the best way to create the rule? using calculation Manager or VBSCRIPT?
  2 list of members purpose?
  and
  3. different n/b calculate and calculate force?
  
  
  
  Thank you to
  850131

  Hi guy,
  1. which is the best way to create the rule? using calculation Manager or VBSCRIPT?
  Not so sure about this

  2 list of members purpose?
  Membership lists allow you to specify a segment of information within a dimension. You create lists of members in a VBScript file and load the file in your application. Once loaded, member lists are available for the users of the application. For example, you can select lists of members during the definition of the view in the data Explorer or in newspapers

  You can find more information in the HFM Administrator's guide

  See you soon!

  J

• Run guests from time disabled for stand-alone applications Essbase calc Manager

  Could you let me know if we could assign RTP for a business rule created through the Manager of calculation for Essbase stand-alone application (not activated EMPA)? I created a business rule in calc, Manager of a standalone version of Essbase (essentially copied the contents of a calculation script and saved in a new business rule). The rule completed successfully, however the RTP section is disabled when I tried to create a variable for this rule.

  
  

  

  Attempted to create a global variable, but could not find him under the knot, essbase. This means that by the RTP can be created only for requests that are active-EPMA? We are currently in version 11.1.2.2

  
  

  No, not in 11.1.2.2 you must be on 11.1.2.3 or higher, as says 11.1.2.2 ""execution prompt variables can be used in the planning of business rules. " "

• 11.1.2.3.700 Calc manager - cannot open business rules in IE11 but can in Firefox

  Updated 11.1.2.3.500 to 700 for the IE11 support.

  I installed the following hotfixes:

  1 20675028 - SSP

  2 20612400 - workspace

  3 20643564 - hyperion Planning

  4 20929659 - architect EPM (foundation server)

  5 21292109 - Manager of calculation

  6 20768325 - statement and analytical framework

  7. 21240419 - ADF MLR

  I deleted the directory tmp and cache on servers managed and the Planning0 and calcmgr0

  (Oracle\Middleware\user_projects\domains\EPMSystem\servers\CalcMgr0)

  History/cache deleted my Internet Explore.

  When I go to the calculation Manager and try to open any business rule of calculation Manager I receive the following informational message: "Please try to reload the component script again." When you click on 'OK' I do not see any text in the business rule. (See attachment)

  
  I can run the business rules of the application of planning successfully and I can see them under "Shared Services" and import/export business rules.

  Calculation of the Manager process runs on the server, the logs show no errors in the Oracle\Middleware\user_projects\epmsystem1\diagnostics directory

  Tried to search for the message but could not find anything about this message.

  Any suggestions?

  OK, I think I understand what is happening, I noticed a difference between the user interface in your screenshots and it seems that you disabled for calc Manager ADF.

  You will be able to confirm is that you run a report of registry and it will have a BINDOWS_ENABLED = true for the CALC_MANAGER_PRODUCT property

  If I pass the ADF to bindows so I see the same problem, is there a reason you do not run ADF mode?

  See you soon

  John

• HFM Calc Manager of rules does not appear through excerpts-> elements of the application

  Dear team,

  We have management rules defined in application consolidation HFM EPMA but during extraction through the workspace using snippets-> Application parts, few of them make their appearance, but not all.

  That's why I wonder that all Manager cal rules are run in the context of Consolidation or not. Please provide steps to check whether or not all the rules of calc manager associated with the application.

  According to my understanding, Manager of calc rules should extract through the workspace using snippets-> elements of Application please confirm if my interpretation is correct or not.

  We are om EMP 11.1.2.3

  Your immediate response is much appreciated.

  Thank you

  Hello. Check in the Calc Manager that the desired rules are rule groups that are marked for deployment. If the rules are not in a set of rules, or rules in some rulesets not marked for deployment, then the rules will be not responsible for HFM.

  Kind regards

  Eric

• Unable to deploy calc manager rule attrbuts in 11.1.2.1

  I'm unable to validate/deploy a rule of calc Manager in 11.1.2.1. This rule is also developed as a calc script and gets validated/executed successfully.
  This is a custom currency conversion script
  
  Sample
  Jan)
  IF (@ISMBR (@Attribute ("b_CNY")))
  "USD" = "Currency" / "Avg_Rate"-> "CNY";
  
  ELSEIF...
  
  ELSEIF...
  
  ENDIF
  )
  
  Do we know if this a bug known?
  
  Thank you

  It used to be a bug that @attribute could not be validated, perhaps useful to check patch to see if it is still attached.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• LCM: Basic rules Calc Manager vs planning files

  I need rule of LCM files and see the rules in 2 different locations, Foundation-> Manager of Calc and planning-> rule files. That is the right file where LCM, and what is the difference between them?

  In addition, files that were brought by the spectacle of LCM under planning-> rule files but non Foundation-> Manager of Calc. Why would it be?

  Thank you!

  FA

  To do this, you need to understand the underlying design. Unlike HBR, who acted as the repository of rules in Calc Manager, rules must be deployed at Calc Manager planning. Once the rule is deployed to planning, it (planning) maintain the copy of the rule in its repository. You can continue to make changes to your rules in calc Manager and there is no effect on the rule in planning.

  So for LCM, you will have the rules in 2 places, in Calc Manager (version may differ from what is in the schedule) and also in planning.

  So you can import via LCM planning rules and it will run without calc in Picture Manager. But if you want to change these rules and deploy it to the planning, you must import the rule via lcm in Calc Manager and redeploy to the schedule.

  Sree - mougel

• Issue business rules - cannot associate planning in environmental assessments (11.1.2.0)

  Hello
  
  I am facing a problem when I try to associate a rule of planning business in the EA. When I try to develop the planning node to find our application to associate, I don't see anything under the node of the planning.
  
  Another thing that is strange is that I do not see that planning has added to the location node under Administration on the view of the company, but when I go to the "Locations" tab on my business rule and try to add the same planning repeats, and I am not able to do.
  
  In addition, I'm unable to see my business rule in Planning and no wonder, it's because I'm not able to associate the business rule to my plan of implementation planning in EAS and the appropriate location is not added.
  
  I spend two other messages in the forum which discusses a similar problem and made sure I actually assigned access to myself. Also, I use an administrator account. I also tried to restart the services that they suggested in some messages of the forum and also in the document "Troubleshooting with Business rules Issues" on the Oracle Web site, but it did not help. I don't know what goes wrong and that is what I am missing which is continues to cause this problem.
  
  Please help me with your ideas and I would like to know how to solve this problem.
  Thank you!

  Is it EPMA then you will need to use the calc Manager, if one is your request or EPMA, classical planning are you sure that you have created the application to use business rules and not Manager Calc.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Delete the business rule on the list of planning application business rules

  Hi all
  

  
  

  It is Hyperion planning 11.1.2.3 500, Classic application.

  
  The business removed from the calculation Manager rule is not available in the calculation Manager but still available in the list of planning application business rules.

  Any suggestion is appreciated to get it removed the application too.

  Note: EPMA, to deploy the application, but not safe for the classic.

  Kind regards

  Deker P.

  Are you sure you have deployed all the rules again Calc Manager planning then the rule is removed from the planning to remove from the Manager of Calc won't be enough.

  Support documents

  How to remove Calc of Hyperion Planning and Smart View rules after their removal in the calculation Manager? (Doc ID 1983285.1)

  How to remove redundant deployed rules of calculation Manager a Hyperion Planning application (Doc ID 1568355.1)

  How to completely remove the business rules created in the calculation Manager (Doc ID 825853.1)

  How to remove business rules that have been deleted or renamed in the calculation of Planning Manager. (Doc ID 1598010.1)

  See you soon

  John

• How to undeploy deployed in planning business rules

  I'm unable to undeploy deployed on Production test management rules. Removal of the calculation Manager leaves BR in planning... is there in another option?

  Try this http://docs.oracle.com/cd/E17236_01/epm.1112/cmgr_admin/ch07s03s01.html

  "To delete a business rule or ruleset from an application after the deployment of the business rule or the ruleset, make it ineligible for deployment by clearing the check box next to its name in the deployment view. You can then perform a full deployment of demand by opening and deploy. »

  You have already deleted rule of Calc manager tries to create empty rules with the same name (if the first full deployment would not help)

  Published by: vvipirailo on June 6, 2012 10:42

• Export business rule

  Hello all-
  
  I'm trying to export business rules using the Regional service. I chose the business rule export & checked on the rule that I wanted to export. My EAS client is blocked and I don't know if it still works on it. I threw another EAS client to check if I can
  
  See anything in sessions, but I do not think that so that it shows anything in sessions if we export the rules that they are not stored in the Essbase database. Does anyone know how to follow the process of exporting the business rule? I'm on
  
  9.3.1 planning.
  
  Thanks in advance

  If there are a quite a few rules of business and dependents involved such as exporting variables can take some time.
  If you look in the Task Manager you should see the customer of EAS with CPU, I saw big exports take hours on 9.3
  I don't expect to take a long time if it is a rule

  See you soon

  John
  http://John-Goodwin.blogspot.com/