WRT160N V2 can't connect to Internet
I installed WRT160n v2 router as a replacement for my previous mut router may not have work. I use only the wired connection.
ISP - Optus merger. Laptop is DELL Vostro 1710
I can get the IP address, but cannot get internet connection.
my browser can not display page of my modem (10.1.1.1)
I've been reading about this internet forum and chat support session conducted live - nothing hepls.
Any ideas? Here's my online Liksys configuration configuration page thank you in advance,
Andriy
Firmware version: v2.0.02 build 008 27 July 2008
Checking the firmware: 720240810b4ab4250c27f00baa79acb3
Current time: not available
MAC address: 00:21:29A:F4:8 D
Host name: domain name: domain.invalid
Internet connection
Type of connection: DHCP Auto - Configuration
IP address: 58.110.117.79
Subnet mask: 255.255.255.0
Default gateway: 198.142.129.45
DNS1: 10.1.1.1
DNS2:
DNS3:
MTU: 1500
49710 days 6 hours 28 minutes 28 seconds of the term of the lease DHCP:
Hi dibbler, I install modem as a full bridge and so far it seems good. Where therre is no performance and reliablility issues, I'll keep it what.
Thank you
Andriy
Tags: Linksys Routers
Similar Questions
-
Satellite L40 - 16 d - I can't connect to internet after downgrade to XP
Hello
I have the toshiba Satellite L40 - 16 d
Intel Pentium Dual - Core Processor T2310 (1 MB of cache, 1.46 GHz, 533 MHz FSB)
2GB (1 GB + 1 GB), maximum extension: 2 GB, technology: DDR2 RAM (667 MHz)
flat hard 120 GB
Wireless NETWORK (802. 11 b / g)
Ethernet LAN, modem international V.90 (V.92 ready)I have this downgrade from Vista to XP sp2
I installed all the drivers from this site. http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp?After this downgrade, I can't connect to internet, it shows me this yellow triangle!
Either go wireless or ethernet lan communication
I have install all the drivers from the site http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?
but the problem persistsWhat can I do?
Hello!
After the downgrade, you did an update of the BIOS?
There are two available BIOS version: one for Vista and one for XP.
So I have to do an update to XP of the BIOS version.
This BIOS update adds functionality to your system.So again, check the Web from Toshiba site, download it and do the update.
Good bye
-
Hello! I have a problem with my card express 11 b/g/n wireless lan mini pci because I can't connect to internet via wifi but I can connect to the internet via cable. whenever I try to connect it repeat to myself that there is a problem with your wireless network card. I tried troubleshooting, uninstall and reinstall the program, but always the same result. I'm updating too but still the same thing. I use a windows 7 Professional on my Lenovo 412. can someone help me? Thank you!
Hello
Method 1: I suggest you to follow the instructions of the link to solve the problem of network card:
How can I troubleshoot network card?
http://Windows.Microsoft.com/en-us/Windows7/how-do-I-fix-network-adapter-problems
Method 2: Troubleshoot wired and wireless in Windows network connection problems
You can also post your question in the forum of Lenovo to get help:
-
Hello.
I was wondering if anyone can help - for some reason, I can't connect to internet xp on the desktop but can be downloaded on aol with vista basic - rang aol, they say it's the problem of microsoft... rang, but they will not help... am stuck as wanted to be able to use my office while the children play with portable... aaaaarrrrggghhh... the only thing I did recently was to remove norton and McAfee, would be possible that?
Hello
Maybe this can help, http://www.ezlan.net/debug.html
Jack, MVP-Networking. WWW.EZLAN.NET
-
After windows update yesterday I can not connect to internet
I can't connect to Internet after update last night. This happened last week too. Last week, I disabled the norton firewall and was able to connect. This week it does not work. When you try to connect to the database's data/program it states: could not connect to the database server. Please check that you have a working internet connection and that the application is configured correctly.
Hello Carise,.
Thanks for posting your question on the Microsoft community.
I would like to know some information about the problem so that we can help you better.
What is the brand and model of your computer?
Thank you for details on the issue.
This problem can occur either because of corrupt network drivers or incorrect network settings.
I would suggest trying the following methods and check if it helps.
Method 1:
Run the network troubleshooting and check.
Reference:
Using the troubleshooter from network in Windows 7
http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7If this does not help, use method 2.
Method 2:
Please use the suggestions in this article and check the issue.
Reference:
Why can't I connect to the Internet?
http://Windows.Microsoft.com/en-us/Windows/cant-connect-Internet#1TC=Windows-7I hope this information helps.
Please let us know if you need more help.
Thank you
-
Help CC can not connect to internet
All my apps updated CC and my CC very well, Connection Manager works BUT help in ANY CC request said it can not connect to internet. I would like to press F1 or click Help instead of having to open another browser window and google my question all the time.
Hello
Please see the link: cloud creative activation and troubleshooting of sign-in
Hope that helps!
Kind regards
Sheena
-
When I disable the NAT on my WRT160N I can't access the Internet
Hello
I had my WRT160N set up and great to work for months. I had a few non-cable problems and the Cable Guy split my cable and now I have a specific modem just for the internet. I can connect to the internet directly and great wireless! However, I went into my XBox 360 to play some Halo 3 and he yelled at me that I have to disable the NAT. I thought it was weird because my WRT160N is still the same piece of material and I think that's where I have disabled the NAT months ago and that he should always have this same setting. Apparently not? So I connected to it and of course it has been activated. I disabled it and now I can connect is no longer directly or wireless internet. Of course, if I set it to active NAT so I can get to the internet again. I need to disable NAT.
Don't know what to do here. Is it possible on the modem cable (Time Warner Cable) where the problem lies? HE would have a configurable parameter for the NAT?
Any suggestions would be most appreciated.
Kevin
Make the following settings for X - Box...
Open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type - 192.168.1.1 and press ENTER...
Let the empty user name & password use admin lowercase...On the Configuration tab change the size of the MTU to 1365, then click on save settings...
Click the 'Administration' tab and disable UPnP and click on save settings...
Click on the tab "Games and Applications" and then click the sub-tab "Port Range Forwarding"...
(1) on the first line in the box, type Application in ABC, in the start box, type in 53 and type in 3074 service box, leave the Protocol as and under type 192.168.1.20 ip address and check the box to enable, click on save settings once it's been...
(2) once you return to the game to the top page, click the Security tab and uncheck block anonymous Internet requests and click on save settings...
3) click on Setup and change the size of the MTU to 1452 and click on save settings... Click the status tab, and take note of DNS1 and DNS2 address...
(4) address IP, Goto settings XBox network settings and assign the following on your Xbox and select manual IP settings
IP address:-192.168.1.20, subnet mask:-255.255.255.0 default gateway:-192.168.1.1...(5) also assign addresses DNS on Xbox
Use DNS1 and DNS2 addresses you took note of the primary router as secondary DNS & DNS status tab for the xbox...(6) turn off your modem, router and Xbox... Wait a minute...
(7) plug the power to the modem first, wait a minute and plug the router power cable, wait another minute and turn on the Xbox and... test it connects...
-
I can't connect to the internet, unless I'm on top of the router. I walk 2 feet or less away and I lose my internet connection. I got the internet company come and check my router, I even got a new. It still does not connect.
I have not had this computer for a year! It is useless unless I can connect to the internet.
Can someone help me please!
Thank you.
Check the driver for the wireless communication update or uninstall the driver from Device Manager and download from hp.com
See you soon
-
I've upgraded to Firefox 8 and I can't establish an internet connection to any webpage via Firefox. I removed the Firefox program and re-installed through Internet Explorer with the same results.
One possible cause is security software (firewall) that blocks or limits Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.
Delete all rules for Firefox in the list of permissions in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.
See:
-
I can't connect to the internet. my windows is XP service pack 3. I even tried to connect my laptop computer directly to the modem and used the lan cable, but it did not work. also disabled my antivirus and my windows firewall. I don't know what to do? can anyone help?
Thank you. They look very well except that you need chipset drivers (point yellow mark next to SMB Bus controller). It is a different story though.
I'm afraid I can't offer much more inviting you to check your services and make sure that the DHCP Client is started and set to automatic.
Someone should come along and offer more help at any time now.
-
After that the virus can not connect to internet
My computer running Windows XP has been infected by a virus 'Alert system' fake who took over the office and hide all my files. I was able to restart in safe mode, run Malwarebytes and Microsoft Security Essentials to capture and remove some viruses. I was also able to display most of my files and desktop programs. (I also tried to do a system restore, but this doesn't seem to work). However, I can not connect to the INternet using Internet Explorer. I reset IE, but I can't always connect. It seems that IE starts to open the URL, but is then blocked somehow by the virus, which redirects to the default "diagnose the problem. The cables are connected and the Internet works. What other options are bypassing them that blocking and/or resettlement of IE.
The error you received seems to indicate that there is a need to reset Winsock. You could try running the FixIt program contained in this article, or the manual procedure:
"How to determine and recover Winsock2 corrupted in Windows Server 2003, Windows XP, and in Windows Vista"
<>http://support.Microsoft.com/kb/811259 >HTH,
JW -
I can see my xbox on my computer but I can't connect to the internet. I don't know what to do
Hello
Maybe this can help.
-
Reinstalled XP, now can't connect to internet via modem/router
With regard to the discussion:
BVSMITH,
I have the same problem as you did. Did you find the drivers on the xp installation cd? I have tried and may not consider the content of the cd, all is well in the list, allowing you to install.
Any additional help by anyone would be appreciated.
Tim
Hello
· You receive an error message or error code when you try to access the internet?
· What is the number and the model of the computer?
1. check the status of the device in Device Manager. Follow the steps for the same thing:
a. click on start
b. click Run, in the Run dialog box type devmgmt.msc
(c) in the Device Manager window, search the map network drive and expand the drive, double-click the sub element to check if an error message or error code is listed.
You can also check: how to troubleshoot possible causes of Internet connection problems in Windows XP: http://support.microsoft.com/kb/314095
-
Original title: can not connect to the internet on a desktop computer Windows XP Prof
I try to use your older desktop with Windows XP Prof I use Quest with an ADSL connection and that you have a wireless connection to a laptop. The office is not wireless. I connected the cable earthnet and quest tell me that I don't have "NIC" on my device manager. Anyone know how I can receive and install on a computer without internet connection? Thank you
L E K, I'm sorry, but I don't know the answers to the other questions. After you enable the NIC, can you check your service manual for an explanation of the other choices? Maybe someone else can answer these questions. Liz.
-
I can not connect to internet links in my e-mail or links in other programs as well.
It started with Windows Mail, but now I click on a link any. If I click on a link, Internet Explore rises, but cannot connect. I either get a screen problem saying to spell correctly or a window takes me to documents choose an execution file. I tried to reset Explorer and looked everywhere I can to connect to the options.
It started with Windows Mail, but now I click on a link any. If I click on a link, Internet Explore rises, but cannot connect. I either get a screen problem saying to spell correctly or a window takes me to documents choose an execution file. I tried to reset Explorer and looked everywhere I can to connect to the options.
I presume you checked if your IE is set as the default program, and he has all his faults?
Start > default programs > Set Your Default programs...t-4-2
Maybe you are looking for
-
HDD upgrade on Satellite 1800-514
HelloI m Maxuer and I have Italian m.I have a portable 1800-514 Satellite with 15 GB hard drive (model ic25n01atda04-0). Can I put HDD with another hard disk of 40 GB of equal or greater capacity.If yes which model I have to take Thank you Excused fo
-
audio line input does not work
I use a mixer of 2800 PC DAK with Philips 212 turntable connected to the line on the back of the computer. Intel motherboard integrated audio Sigma Tel. I can barely hear coming from my speakers and volume control has no effect. All other audio fu
-
Seems OK but when I want to print, select print and pge control shows a box containing the word RECORD. He said PRINT in a box. Now, I can't do the printer printing. I don't want to win, I want to PRINT. Seems that it isin prolem contro; the s Sequ
-
N2048P switch CLI questions.
Hello I received the documentation about setting up our network switch, I was able to get the IP of the switch configuration, but I have problems creating the admin at level 15 user account. Now the admin user is level 1 read-only, here is the scree
-
Link Office disappeared from my favorites in Windows 7 libraries; How to restore?
Yesterday, I inadvertently clicked in the wrong place on my screen of Windows 7 libraries and made my link strongly used for the display of my office disappear from the Favorites in the top box on the left. What should I do to restore that link offic