N2048P switch CLI questions.

Similar Questions

• BlackBerry Z30 Q10 Link Switch Z30 question

  Hello world

  I recently took my Z30 currently Q10 so basically I crossed link blackberry and used the feature of switching device, I fly over all fine except the apps that flies over does not have the entire screen of the Z30, alone takes up the same space as he did on my Q10 and I can't move applications into the empty space at the bottom of the screen. How can I fix it? I tried hard reset and factory wipe too then redid everything and no change. Also, I can't hear the noise when you type on the virtual keys now :/

  Help please!

  Remove applications from the device is App World or by pressing the app (s) in question to see the icon small basket... click on the trash to delete.

  Back to Appworld to download and install fresh for the Z30.

  For the return of keyboard, go into your settings > language and input > Feedback and the volume of your keyboard.

  If you have the main volume control to MUTE or silent profile, the sound will be silent.

• AAA GANYMEDE + accounting - CLI question by user not appear in the report of the ACS.

  Can I know why CLI cancelled by the user does not show on GANYMEDE ACS accounting report. The length of time is displayed, but I also wanted to connect what is the commands issued by the user.

  WHA is missing here?

  enable AAA authentication login VTY P1_ACS local group

  Group default AAA authorization exec local P1_ACS authenticated by FIS

  AAA authorization exec CONSOLE none

  AAA exec by default start-stop accounting P1_ACS group

  AAA commands 5 default start-stop accounting P1_ACS group

  AAA commands 15 arrhythmic default accounting P1_ACS group

  Accounting logs command is stroed in the newspapers of the administration of Ganymede.

  There is also a known issue on ver 4.1.1 and we must

  apply the ACS 4.1.1.23.5 patch to fix the problem.

  Patch for the unit is available on

  http://www.Cisco.com/cgi-bin/tablebuild.pl/ACS-Soleng-3DES

  The patch name: ACS SE 4.1.1.23.5 rollup

  Acs hotfix for windows is available on

  http://www.Cisco.com/cgi-bin/tablebuild.pl/ACS-win-3DES

  The patch name: ACS 4.1.1.23.5 rollup

  CCIE Security

• Management of distributed switch CLI?

  I have a DvSwitch.

  I want to add NEW groups of ports,

  But I don't want to use vCenter.

  I have a lot to add, to almost 800

  of the 800, 600 would be port groups with vlan simple no markings...

  the rest 200 would be with 21 .1q VLAN per port group...

  I want to script it. then place in a ssh/shell window

  can it be done?

  Hello

  You can use the powercli New-VDPortgroup command to create groups of ports on the distributed virtual switches. You must have installed for this powercli.

  Try the following command "Get-VDSwitch-name 'MyVDSwitch' |" New-VDPortgroup-name of the "MyVDPortGroup" - NumPorts 8 - VLanId 4 ".

  You can see the following link for more details. https://pubs.VMware.com/vSphere-51/index.jsp?topic=%2Fcom.VMware.PowerCLI.cmdletref.doc%2FNew-VDPortgroup.html

  Thank you

  Arun

• SD205 (switch) and VLAN

  In addition to all my switches Cisco Catalyst (successful), I have a bunch of Linksys SD205 unmanaged switches on my local network.

  I want to configure my network for VLANs, which means I have all my managed Cisco switches will change to a "Routing" configuration   This configuration works well with Cisco Catalyst switches

  Question: the SD205 can operate in this environment?  I know I can't put one of the ports on the SD205 to be 'delivery', but I would like to connect the SD205 to a port of Cisco, which is "effective", so that the devices on the SD205 can communicate to the rest of the world.

  So far, I have not crowned success, then - maybe - they won't work in a shared resource environment.  Someone at - it a definitive answer?  If they simply can't do it, I will stop wasting my time!

  Thank you

  # A unmanaged switch is not compatible 802. 1 q. It will pass any frame ethernet that was 802. 1 q tagged. The only executives who pass through a switch are unmarked, frames that is the VLAN port on the catalyst native.

  If you want to use unmanaged switches, you have to connect to a port configured in mode access, Member of a single VLAN. For example, you can configure a port on the catalyst for access VLAN 10 mode and connect a switch to that port. All devices connected to the switch unmanaged will be VLAN 10. This as you can do.

  But several VLANS: alert the unmanaged switches is impossible because all frames ethernet on the switch must not be tagged.

• Error stack N2048P

  I have 2 stacked N2048P switches. Shortly after the deployment, I started to have constantly the errors below:

  DRIVER 172.x.1.x - 2 [108576100]: broad_hpc_drv.c (4362) 8073 %% unit: 0
  CDC RX FIFO error table entry 0 39 ECC

  DRIVER 172.x.1.x - 2 [108576100]: broad_hpc_drv.c (4362) 8121 %% unit: 0
  CDC RX FIFO entry error 37 double-bit ECC

  Here are the nine switches configured by Dell. I'm not familiar enough with the operating system to solve problems. Everyone knows this? If so, how to solve it?

  Hi chanjohn01,

  The error is a memory error. You can try to update or Flash the image and see if that helps. http://www.Dell.com/support/home/us/en/19/drivers/DriversDetails?driverId=Y7V3N&FILEID=3376784553&osCode=NAA&ProductCode=networking-N2000-Series&LanguageCode=en&CategoryID=NI

  If this does not resolve the problem, try unstacking and ensuring that it is just the first member of battery that is giving the issue, the error refers to unit 0.

• Switch Cisco 2960/3560 = > recovery password and default settings with the button Mode

  Hi Experts,

  I have some confusion with the button Mode with cisco 2960/3560 switches.

  I read on many forums and articles, but where things are not clear.

  a place given 3 seconds and somewhere is given 7 or 10 seconds.

  Qus1), what is the exact time to press/hold Mode button to perform two following tasks:

  A. password recovery (according to my knowledge 3 sec) good or bad?

  Configuration of the switch (start + run) would be safe

  After the recovery of password? Yes or no

  B. factory default (according to my knowledge 10 dry) good or bad?

  I'm afraid, because if I press mode button more than 3 seconds, then

  It will delete any configuration of cisco switch. Yes or no

  Qus2) I want to recover the catalyst 2960/3560 switch password without

  Start/run configuration to lose. That is my main concern.

  Please tell me how to do this, what will be the time keeping Mode buttom

  in a few seconds?

  Qus3) which means this line

  "If the password recovery mechanism is disabled in switch

  then you will lose all the config.

  This sentence has been given on this forum url

  https://supportforums.Cisco.com/thread/140848

  KS

  Attach a terminal or PC with terminal emulation (for example, Hyper Terminal) port console switch.

  Use the following terminal settings:

  • Bits per second (baud): 9600

  • Data bits: 8

  • Parity: None

  • Stop bits: 1

  • Flow control: Xon/Xoff

  Note: For more information on the wiring and connection of a terminal to the console port, refer to connecting a Terminal to the Console Port of Catalyst switches.

  Unplug the power cable.

  The power switch and take it to the switch: command prompt:

  2900XL, 3500XL, 2940, 2950, 2960, 2970, 3550, 3560, and 3750 switches of the series, to do this:

  Press and hold the mode button located on the left side of the façade, while you reconnect the power cable from the switch.

  2960, 2970

  Release the Mode button when the SYSTEM LED flashes orange and then turns green. When you release the Mode button, the SYSTEM LED flashes green.

  3560, 3750

  Release the Mode button after about 15 seconds when the SYSTEM LED turns green. When you release the Mode button, the SYSTEM LED flashes green.

  The system was interrupted before the flash at the end file system initialization

  loading the operating system software:

  flash_init

  load_helper

  boot

  switch:

  Run the flash_init command.

  switch: flash_init Initializing Flash... flashfs[0]: 143 files, 4 directories flashfs[0]: 0 orphaned files, 0 orphaned directories flashfs[0]: Total bytes: 3612672 flashfs[0]: Bytes used: 2729472 flashfs[0]: Bytes available: 883200 flashfs[0]: flashfs fsck took 86 seconds ....done Initializing Flash. Boot Sector Filesystem (bs:) installed, fsid: 3 Parameter Block Filesystem (pb:) installed, fsid: 4 switch: !--- This output is from a 2900XL switch. Output from !--- other switches will vary slightly.

  Run the load_helper command.

  switch: load_helper switch:

  Question the dir flash: command.

  Note: Be sure to type a colon ":" after the dir flash.

  Appears in the file system of the switch:

  switch: dir flash: Directory of flash:/ 2    -rwx  1803357                  c3500xl-c3h2s-mz.120-5.WC7.bin !--- This is the current version of software. 4    -rwx  1131                     config.text !--- This is the configuration file. 5    -rwx  109                      info 6    -rwx  389                      env_vars 7    drwx  640                      html 18   -rwx  109                      info.ver 403968 bytes available (3208704 bytes used) switch: !--- This output is from a 3500XL switch. Output from !--- other switches will vary slightly.

  Type rename flash: flash: config.old config.text to rename the configuration file.

  switch: rename flash:config.text flash:config.old switch: !--- The config.text file contains the password !--- definition.

  Issue the boot command to boot the system.

  switch: boot Loading "flash:c3500xl-c3h2s-mz.120-5.WC7.bin"...############################### ################################################################################ ###################################################################### File "flash:c3500xl-c3h2s-mz.120-5.WC7.bin" uncompressed and installed, entry po int: 0x3000 executing... !--- Output suppressed. !--- This output is from a 3500XL switch. Output from other switches !--- will vary slightly.

  Enter "n" at the prompt to abort the initial configuration dialog box.

  --- System Configuration Dialog --- At any point you may enter a question mark '?' for help. Use ctrl-c to abort configuration dialog at any prompt. Default settings are in square brackets '[]'. Continue with configuration dialog? [yes/no]: n !--- Type "n" for no. Press RETURN to get started. !--- Press Return or Enter. Switch> !--- The Switch> prompt is displayed.

  At the switch prompt, type en to enter a mode.

  Switch>en Switch#

  Password recovery

  Type rename flash: config.old flash: config.text to rename the configuration file with its original name.

  Switch#rename flash:config.old flash:config.text Destination filename [config.text] !--- Press Return or Enter. Switch#

  Copy the configuration file in the memory.

  Switch#copy flash:config.text system:running-config Destination filename [running-config]? !--- Press Return or Enter. 1131 bytes copied in 0.760 secs Sw1#

  The configuration file is now reloaded.

  Replace the current passwords that you do not know. Choose a password with at least one capital letter, one number and one special character.

  Note: Replace passwords that are required. You must crush not all passwords listed.

  Sw1# conf t !--- To overwrite existing secret password Sw1(config)#enable secret !--- To overwrite existing enable password Sw1(config)#enable password !--- To overwrite existing vty password Sw1(config)#line vty 0 15 Sw1(config-line)#password Sw1(config-line)#login !--- To overwrite existing console password Sw1(config-line)#line con 0 Sw1(config-line)#password 

  Write the running configuration in the configuration file with the write memory command.

  Sw1#write memory Building configuration... [OK] Sw1#

  For factory reset:

  do not give under the control of factory reset

  Switch#copy flash:config.text system:running-config

  can I copy the running configuration to Flash

  Switch flash running-config #copy:

  Destination file name [running-config]?

  Building configuration...

  [OK]

  Switch #copy running-config startup-config

  Name of destination file [startup-config]?

  Building configuration...

  [OK]

  Review the link for more information below

  http://www.Cisco.com/en/us/products/hw/switches/ps628/products_password_recovery09186a0080094184.shtml

  Please note the useful messages.

  Concerning
  Vesta
  "Everybody is genius." But if you judge a fish by its ability to climb on a tree, he will live his entire life, believing that this is stupid. "

• RADIUS authentication for the switch using ISE

  Hi guys,.

  Someone did he do Radius Authentication for switch cli connection using ISE?

  We did it in our environment with ISE, but it is a challenge to give read-only access / Priv-1.

  If some users know the enable password, they can use and earn full privilege.

  Anyway to get around this other than to change the enable password?

  We have thousands of switches and won't change on each of them.

  If you have another method please advice.

  Thank you in advance.

  Well, you can set the "enable" function also be controlled via the AAA server with the following command:

  AAA authentication enable... This way server AAA will be checked for authentication for the secret to activate and use the local database as a last resort

  I hope this helps!

  Thank you for evaluating useful messages!

• IP Helper

  Im trying to get the IP address of the server DHCP (100.100.100.80) but he told me that it must be of the form A.B.C.D.

  It is on a N2048 switch.  Basically what Im trying to do is relay DHCP configuration of vlan 2 vlan 1.  Ports 1-24 are vlan 1 and 25-48 are vlan 2 the DHCP server is physically connected to port 1 if what counts.

  I received the same message as you did when you enter this IP to the web INTERFACE. However, the IP address works very well if enter you in the CLI. I'll have to do some more research on why the web UI behaves in this way. For now, you will need to connect to the switch CLI to use an IP address in the subnet.

  Is a common tool used to a telnet/ssh connection to the switch.

  http://www.PuTTY.org/

  When the program will be open telnet select as the connection type. If telnet was disabled and ssh enabled, and then select SSH. In the host name box, enter the IP address of the switch. Then click on the Open button.

  Once the CLI window is open you will be presented with a prompt that displays: console >, type the following commands.

  Console > activate

  Console # configure

  Console (config) # ip helper-address 100.100.100.80 dhcp

  Once this is done then issue the following command to ensure that the order is in place.

  Console (config) # show ip helper-address

  Once you are satisfied with the configuration you will need to save the configuration running in the startup configuration.

  Console (config) # end

  Console # copy running-config startup-config

  Let us know if you have any questions about this process.

• PowerConnect 6224 VLAN Routing, unable to connect out of VLAN but able to connect by entering.

  To set up a new VIRTUAL local network to separate the common workstation network and obtain new DHCP scope, I had a few questions and found advice in the post of http://en.community.dell.com/support-forums/network-switches/f/866/t/19370806.aspx?PageIndex=3 but now I find that my traffic is not going through properly so I'm starting a new thread to get help shows all of working.

  Current primary network 192.168.1.0/24 (192.168.1.200 DHCP server). Adding new perspectives to the server for 192.168.3.0/24 active.

  Gateway default 192.168.1.0/24 is 192.168.1.254 (Cisco ASA, it was set up like that when I arrived and no room to insert the dedicated router). Adding route to 192.168.3.0/24 > 192.168.1.253 (PC6224 and VLAN 1 management interface). I also added exceptions NAT asa for the 192.168.3.0 network.

  I was still having some problems of scathing to the 192.168.3.0 network from the DHCP server and I added a static route on the server for this network, bypassing the ASA for routing to the switch.

  From the DHCP server, I am able to ping 192.168.1.253, 192.168.3.254 but not a laptop that runs Windows XP configured with 192.168.3.1 address connected to port 22 of the 6224.

  The XP laptop, I am able to ping 192.168.3.254 but not 192.168.1.253 or any other address in the 192.168.1.0 network.

  The switch CLI, I am able to ping on both networks destinations.

  Here is my config of switch. I have it set to scrape factory reset so there is no buried old ACL inside.

  console #show run
  ! Current configuration:
  ! Description of the system «PowerConnect 6224P, 3.3.5.5, VxWorks 6.5»
  ! 3.3.5.5 system software version
  ! Passage mode is configured as disabled
  !
  Configure
  database of VLAN
  VLAN 2
  VLAN 2 1 routing
  output

  IP 192.168.1.253 255.255.255.0
  by default-gateway IP 192.168.1.254
  IP - domain.local domain name
  name-server IP 192.168.1.11
  name-server IP 192.168.1.200
  IP routing
  IP helper-address 192.168.1.200 dhcp

  interface vlan 2
  name 'common '.
  Routing
  192.168.3.254 IP address 255.255.255.0
  IP netdirbcast
  bandwidth 10000
  business assistance-address IP 192.168.1.11
  field of IP helper-address 192.168.1.200
  IP helper-address 192.168.1.200 dhcp
  IP mtu 1500
  output

  l2relay DHCP
  DHCP l2relay vlan 2
  !
  interface ethernet 1/g21
  switchport access vlan 2
  output
  !
  interface ethernet 1/g22
  switchport access vlan 2
  output
  !
  interface ethernet 1/g23
  switchport access vlan 2
  output
  !
  interface ethernet 1/g24
  switchport access vlan 2
  output

  
  

• Update IDSM2 5,0000 S225 to 5.1 using the application partition

  can I switch an IDSM2 (WS-SVC-IDSM2-BUN) in a 5,0000 S225 5.1 6513 by copying the partition of 5.1 application on the sensor

  [Correction to the userguide cisco]

  Chapter 10 Configuring the sensor using the CLI

  Modules and devices available

  Reimage on JOINT-2

  This section contains the following topics:

  Catalyst Software, page 10-124

  Software Cisco IOS, page 10-126

  Catalyst Software

  To reimage the application partition, follow these steps:

  Step 1 get the file from the software Center on Cisco.com and copy application partition

  it to a FTP server.

  Step 2, connect to the switch CLI.

  Step 3 start the JOINT-2 to the maintenance partition:

  cat6k > (enable) reset module_number cf:1

  Step 4 connect to the partition maintenance CLI:

  Login: guest

  Password: cisco

  Step 5 Reimage the application partition:

  [email protected] / * /# ftp://user@ftp server IP/directory update

  file access/image path

  Step 6 specify the FTP server password.

  After the application partition file has been downloaded, you are asked if you

  you want to go forward:

  The upgrade will scan the content on the hard drive. Do you want to

  Continue to install [y | n]:

  Step 7 type y to continue.

  When the application partition file has been installed, you are returned to the

  maintenance CLI score.

  Out of step 8 maintenance partition CLI and go back to the switch CLI.

  Step 9 reboot the JOINT-2 for the application partition:

  cat6k > (enable) reset module_number hdd:1

  Step 10 when the JOINT-2 has restarted, check the version of the software.

  Step 11 in the partition CLI application log and initialize the JOINT-2.

  Page 10-2, in view of the procedure, see initialization of the sensor.

  IF NOT, THEN IS IT SHORTENED 4.1 to 5.1?

  I was in the middle of editing my answer when he entered, check again. There is the question of "fact the maint.". partition must be upgraded? "and I have identified patches and GIS level to apply later.

• SG500XG-8F8T identity crisis

  We have two SG500XG-8F8T switches that have initially setup as independent switches. We tried to stack them using native stacking using ports 15 and 16 on each switch with SFP cables. They would never stack correctly. However, in trying to solve this, we have a problem. Took one of the switches on the S/N and the MAC of the other switch and little matter we don't do we get it back to its own S/N and the MAC as shown on the chassis label.

  I have unplugged all connections to the switch in question except a connection to the serial port of the machine we use it to manage and tried factory reset (both using the reset button being held for more than 10 seconds) and all the way up to 30 seconds on another attempt which resets the configuration. It is remove the startup-config. However, the switch come always return displays S/N and a MAC of the second switch.

  Basically the two switches are now reporting the exact same S/N and MAC while the installer in stand-alone mode, battery and with the one in question completely disconnected from everything on the network, including the other switch, and it will not always correctly reset to its own S/N and the Mac.

  Any thoughts on how to solve this problem?

  Hello Erik,.

  I'm really sorry for the inconvenience that you are experiencing.

  This is a rare problem, but fortunately, there is a way to fix it.

  Please call us at the:
  http://www.Cisco.com/c/en/us/support/Web/TSD-Cisco-small-business-support-center-contacts.html

  so, we can open a ticket, make a WebEx session and re-enter the SN and MAC address on the switch.

  Please note that you will need access to the switch CLI.

  Kind regards

  Milan Milanov

• Cisco SG300 / ASA 5505 intervlan routing problem

  Dear all

  I have a problem with the configuration correctly sg300 layer 3 behind the ASA 5505 switch (incl. license more security)

  The configuration is the following:

  CISCO SG300 is configured as a layer 3 switch

  VLAN native 1: 192.168.1.254, default route ip address (inside interface ASA 192.168.1.1)

  VLAN defined additional switch

  VLAN 100 with 192.168.100.0/24, default gateway 192.168.100.254

  VLAN 110 with 192.168.110.0/24, default gateway 192.168.110.254

  VLAN 120 with 172.16.0.0/16, default gateway 172.16.10.254

  Of the VLANS (100,110,120) different, I am able to connect to all devices on the other VIRTUAL local networks (with the exception of Native VLAN 1; is not the ping requests)

  From the switch cli I can ping my firewall (192.168.1.1) and all the other gateways of VLANs and vlan (VLAN1, 100, 110, 120) devices

  Asa cli I can only ping my switch (192.168.1.254) port, but no other devices in other VLAN

  My question is this. What should I change or installation in the switch configuration or asa so that other VLANs to access the Internet through the ASA. I will not use the ASA as intervlan routing device, because the switch does this for me

  I tried to change the asa int e0/1 in trunkport (uplink port switch also), to enable all the VLANS, but as soon as I do that, I can not ping 192.168.1.254 ASA cli more.

  Any help is greatly appreciated

  Concerning

  Edwin

  Hi Edwin, because the switch is layer 3, the only necessary behavior is to ensure that default gateways to the computer are set on the SVI interface connection to the switch to make sure that the switch is transfer traffic wished to the ASA.

  The configuration between the ASA and the switch must stay true by dot1q, such as the vlan all other, unidentified native VLAN tagged.

  Also, if I'm not wrong, on the SAA you must set the security level of the port to 100.

  -Tom
  Please evaluate the useful messages

• Pages: How do I create a formatted list which maintains spacing, lettering, numbering, "previous", etc.. ?

  I am a teacher of University using Pages to write an exam multiple choice. The format of the question is the following:

  1. [question]

  A. [option 1]

  B. [option 2]

  C. [choice 3]

  D. [selection 4]

  2 [issue]

  A. [option 1]

  B. [option 2]

  C. [choice 3]

  D. [selection 4]

  Pretty simple. But it can be laborious and time-consuming to create this list. Pages will be 'Start from A' for multiple choices responses. Then I write the following question and have to manually switch the question # return to «Continue from previous» In addition, I would like to automatically switch a line between choice and the next question.

  Actually, is there an easier way for automatically formatting this list without setting manually each line?

  The problem is with Pages 5.6.2.

  You can make a fairly complex style of lists in Pages ' 09, down to the styling of the numbering prefix used and save it as a hierarchical list Style and combine this with a paragraph Style.

  But in the Pages 5.6.2, like most other things, is a lost cause.

  Peter

• Pulls plug wrong Mac Pro?

  I use a Mac Pro 2012 environment; run the Mavericks OS X 10.9.5.  I was running "Disk utility" my Mac Pro is stuck in some sort of loop (I think):

  1. the Force Quit option did not work for out me of trouble.

  2. I tried pressing the switch "power", but that no longer works.

  3. I pulled the power cord from the power source.  It worked.  Then I reconnected the power cord and started my Mac Pro using the "switch".  Question: I did a lot of damage to my Mac Pro by pulling on the supply cord to stop my Mac?  Do you think I should buy and install a new hard drive?

  It is never a good idea, unless you have completely into it as you were. You left some disk problems, but there is a fair chance to run repair disk will correct them. The best thing to do is restart the SHIFT key now. The start-up will take much longer time than usual, run repair disk, you can restart normally.