WRT160N v2 resets every 30-60 minutes

Similar Questions

• Satellite P850 - 31L loses connectivity Wi - Fi every 2-5 minutes

  I fall every 2-5 minutes.
  What happened since I bought the machine regardless of network or location.

  I can usually correct with "Troubleshooting internet connection" microsoft reset of the card, but that takes a few minutes also. Sometimes I have to restart and starts all over again.

  I get more dependent on connectivity in my work, so I have to either fix or opt for another machine. Someone at - it ideas?

  Have you tried to update the driver Wlan?
  I would recommend this doing.
  The laptop seems to support the * Intel Wireless - N 2230 * card and I recommend you to download the appropriate WLan driver from the Intel Web site.

  Of course you can also visit the different router settings.
  Check channels of WLan and different standard Wlan 802.11 B / G or N

• With Windows 7 online game lag s for 1 min every 15-20 minutes. Help, please!

  Just downloaded Battle of the Immortals free MMORPG and every 15-20 minutes I have a lag of 1 min where the game slows to an almost unplayable State. First I thought that maybe my internet has strangled so I called my ISP. They ran a few test and said that everything was running at 100%... So next time, I contact the support team technique video games... They had run me a dxdiag and a program to hack... I also ran a tracer on my connection just to show them this is not not my internet... Then, they responded and said "it could be Windows, Windows Firewall, Admin, UAC, network or anti-virus settings you need to change so that they are not blocking or limiting the game." I tried everything until I even contacted them... I watched my CPU usage and prosesses and nothing no longer uses the CPU than normal usage... I have no virus and I just bought this processor so there may not be a hardware malfunction about 2 months... More 5 other online games I play run very well... I also tried setting the game as high priority in windows Task Manager... That which seemed to work for about 6 hours but now my windows task manager keeps reseting back to normal priority. I downloaded a program called Prio which is suppose to set a permanent priority... Well, this program has not completely... I also tried to run the program with the resolution of the problems of compatibility and as an administrator... Without success... I have also all the drivers for all... I have triple checked the drivers... Help, please!

  MY CPU Specs:

  AMD Athlon (TM) II X 4 820 2.80

  RAM: 8,00

  64-bit operating system

  Graphics card: Nvidia Geforce 9100

  1 Terrabyte HARD drive

  Well I think I got myself the solution...  I discovered that the game made my jump 20 c cpu temp... So when my CPU hits 50 - 54 c temp the game hits a pic gal... Currently, I have on my open cpu and a fan blowing on the one side and I had 3 hours of spike no lag... It was difficult to find a limit temp CPU specific before you start to make mistakes, but what I found said it was about 50 to 60 c Temp...

• Internet disconnects every 10-15 minutes

  I have a Qosmio G30-194 I bought in February 2008 Dubai Duty free. I have Windows XP on my laptop. I have a broadband Internet connection.

  Internet disconnects every 10-15 minutes on my Qosmio G30-194; After repair, I get the line once more, only to disconnect after 10-15 minutes.

  The system event log says "* EVENT_BROWSER_ELECTION_SENT_LANMAN_NT_STOPPE D * ' with the message" * the browser has forced an election on network %1 because a master browser was stopped *.»
  The explanation reads as follows: "* the network must be a master browser *.»

  What is worse, is there the user Action: ' * there is no user action required. "

  What am I supposed to do other than to take this action, that is, to find a solution to this problem?

  * PLEASE HELP! *

  Thanks and greetings
  Mahesh

  Have you tried to update the Wireless driver?

• Qosmio G40 - 11 d - every 2-3 minutes freeze the system

  Hardware: Computer laptop Toshiba Qosmio G40 - 11 d, bios 2008, OCZ Vertex 3 SSD
  Software: Windows 7 Professional 64-bit all updates from windows update.

  Problem:
  Every 2-3 minutes freeze the system - to stop the disc - LED disc controller turned on all the time.

  I did the following:
  1. I installed the drivers of intel (iata_cd.exe) of http://downloadmirror.intel.com/19607/a08/iata_cd.exe
  2. I ran the ocz.reg script:
  Windows Registry Editor Version 5.00

  [HKEY_LOCAL_MACHINESYSTEMCurrentControlSetservicesi aStorParametersPort0]
  "LPM" = DWORD: 00000000
  "LPMDSTATE" = DWORD: 00000000
  "MISCONDUCT" = DWORD: 00000000

  [HKEY_LOCAL_MACHINESYSTEMCurrentControlSetservicesi aStorParametersPort1]
  "LPM" = DWORD: 00000000
  "LPMDSTATE" = DWORD: 00000000
  "MISCONDUCT" = DWORD: 00000000

  [HKEY_LOCAL_MACHINESYSTEMCurrentControlSetservicesi aStorParametersPort2]
  "LPM" = DWORD: 00000000
  "LPMDSTATE" = DWORD: 00000000
  "MISCONDUCT" = DWORD: 00000000

  [HKEY_LOCAL_MACHINESYSTEMCurrentControlSetservicesi aStorParametersPort3]
  "LPM" = DWORD: 00000000
  "LPMDSTATE" = DWORD: 00000000
  "MISCONDUCT" = DWORD: 00000000

  [HKEY_LOCAL_MACHINESYSTEMCurrentControlSetservicesi aStorParametersPort4]
  "LPM" = DWORD: 00000000
  "LPMDSTATE" = DWORD: 00000000
  "MISCONDUCT" = DWORD: 00000000

  [HKEY_LOCAL_MACHINESYSTEMCurrentControlSetservicesi aStorParametersPort5]
  "LPM" = DWORD: 00000000
  "LPMDSTATE" = DWORD: 00000000
  "MISCONDUCT" = DWORD: 00000000

  The problem has been eliminated, but not quite. Now, the system stops only at idle speed... (aflter - 10-30 min)

  Let me know what I do next.

  Hey Buddy,

  Have you noticed the same behavior with preinstalled Toshiba or did it only with your new SSD HDD?

  You might have to update the firmware of the SSD. You should check the official website of OCZ if there is a newer version. If Yes, start the update firmware and then check again if it works or not.

• Skype has been fine - now his answers don't not every 2-5 minutes

  So, Skype will be open and I receive messages, I'll check them and bam, it will stop responding, sometimes when Im typing a message, sometimes when Im check a message. This happens constantly, like every 2-5 minutes. This has happened when it is updated. Can someone give me a link to an earlier version of Skype? Maybe the one before the update?

  Also, Skype is not mark messages as read unless I have send a message to the person.

  Uninstall the currently installed version of 7.17 and install the previous 7.16.0.102 using this installer version:

  http://download.Skype.com/MSI/SkypeSetup_7.16.0.102.msi

• Satellite L750-1ME - CD/DVD in every 4-5 minutes click on...

  Hello.

  I have a satellite L750-1ME.
  This is a new, I bought 2 weeks ago. All is well, but the cd/dvd-rom 'clicks' in every 4-5 minutes.
  Not open, but by a click. Why? I scan with antivir, nothing...

  It is a hardware failure or run something in the background?

  Thank you

  Hello

  Are you sure that this clicking noise comes from the CD/DVD drive?
  Maybe it s HARD drive.

  My HARD drive clicks from time to time, but it of ok I guess in my case click's product head of HARD drive so that it is moving in the right position.

• WiFi disconnects every 1-2 minutes

  Once I have signed to the internet and open a page, IE email, news, etc., my wireless connection is lost and goes back on saying wireless connection is now connected, what is happening every 1-2 minutes

  Hello

  1. don't you make changes to the computer until the problem occurred?

  2. the problem occurs in safe mode with networking?

  I suggest you try the steps mentioned below and check if it helps.

  Method 1: In the Windows wireless network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2: The problem can also be caused by your security such as anti-virus program or a firewall of Windows /Defender that can have conflicting parameters as to not not to perform certain tasks. I suggest you temporary disable antivirus and firewall and check the result again. You must activate new security that you was disabled programs.

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Hope this information is useful.

• LaserJet Pro M177FW MFP never sleeps, Calibrates every 15-30 minutes

  I have just bought a LaserJet MFP M177FW Pro and had it work. The only questions I have are:

  (1) the printer never sleeps any value I offer it to the sleep timer

  (2) the printer re - calibrated every 15-30 minutes, which is quite noisy

  I tried power walking several times and have tried to unplug the power for 30 seconds and plug in again. The problem persists.

  Can anyone provide assistance on how to sleep at work and how to get the printer to stop the calibration?

  I was actually able to solve this problem later, but none of the above helped suggestions at all.

  What seems the problem changed when the printer performed calibration. I put it to "immediately" instead of "after 15 minutes. The printer has slowed with success since the change.

  Thanks to all who offered suggestions!

• SSAudit Log is reset every day

  We have SSAUDIT enabled in the essbase.cfg file. When we look at our .alg file, it appears that audit records start over every day. For example, Monday, the first record on the .alg will read:
  
  Journal of updates of the user [pedersoa@DEV OID] starting at line [1] for a Total of [10] lines.
  
  The next day (Tuesday) the .alg file in ADDITION to the records of the previous day:
  
  Journal of updates of the user [pedersoa@DEV OID] starting at line [1] for a Total of [6] lines.
  
  In simple terms, it looks like the .alg file "RESETS" every day which makes an impossible audit over the long term. So basically what we have is a file .alg with thousands of lines of audit that restarts every day.
  
  How can I get the .alg DO NOT reset file every day?
  Thank you

  Hi Chris,

  Hope that your version of Essbase is not 11.1.2.1.102 or 11.1.2.1.103. If Yes, then this is a bug

  For your reference, new Bug 14710347: SSAUDIT RESET of NUMBERING in THE 1st ROW in the. The ALG AFTER REBOOT ESSBASE FILE

  Contact the Oracle Support for more information.

  It could be that useful...

  KosuruS
  If the above information is useful, you can mark it :)

• Service VirtualCenter 2.0.2 accident every 5-10 minutes

  I have a problem with my service of VirtualCenter 2.0.2 that crashes every 5-10 minutes.

  The VC database (MSSQL 2000, no clustred) is on a different server from the FV function. I have enough space for the DB, newspapers and backups. The VC is on a physical server. I use ESX 3.02 (62488) with 26 host into two groups.

  There is not much to go... You can consider an upgrade to 2.5 U4, the latest stable just to be sure you are not on a known problem.

  Duncan

  VMware communities user moderator | VCP | VCDX

  -

• Need help disabled account I reset every minutes

  What should I do if my account is disabled I can't reset my password every minute

  Contact Apple Customer Service and support

  1. Apple Store Customer Service at the the 1-800-676-2775 or see the online help for more information.
  2. Contact product support and tech: Contacting Apple for support and service , including the numbers of international calls.

  Apple ID is disabled - Club Apple

  Apple ID - alert "this identifier Apple has been disabled for security reasons" is displayed

• Question by E4200v1: resets every 15 minutes approximately

  After a power outage recently the E4200 router I use itself after restart every 15 minutes or so.  I tried power cycling the router, as well by changing the output that is pluged in if there is a problem with the power.  I am at a loss to what I can try to figure out what is the cause of this behavior.

  Between restarts it as router correctly, I have found no problem outside the continuos reset.  Any help or advice would be greatly appreciated.

  The failure could cause a glitch in your network. It will help restore and reconfigure the router. Also make sure you have the latest FW for the device.

• Reset every 30 minutes after loading the product key valid evaluation license key.

  OPERATING SYSTEM.  Windows Embedded Standard 8

  By the intermediary of "slui 4" to enter the OEM product key, the product key is accepted.

  By 'System', the 'activate Windows' shows "Windows is activated", product ID: 00227-20010-00864-AAOEM.

  By "slmgr /ato" cmd error: 0x80072EE7 on a computer running Microsoft Windows non-core, run 'slui.exe 0x2a 0x80072ee7 to display the error text.

  Via "slui.exe 0x2a 0x80072ee7" cmd, it showed "You can also contact Microsoft by phone to help solve this problem" and the description showed "the server name or address could not be resolved."

  In addition, under the c:\Windows\debug\wlms.txt, it showed the following every 30 minutes.

  2015-11-05 15:03:27, info WLM Windows Embedded Licensing Monitoring Service starts.
  2015-11-05 15:03:27, info WLM entering ServiceMain.
  2015-11-05 15:03:27, the status of the service Info WLM Reporting 2
  2015-11-05 15:03:27, Service Info WLM Reporting as 4 State
  2015-11-05 15:03:30, info WLM license isn't an evaluation license.  EVAL in the image of production not supported.  It stops immediately.
  2015-11-05 15:18:33, WLM the license info is not an evaluation license.  EVAL in the image of production not supported.  It stops immediately.
  2015-11-05 15:33:35, info WLM license isn't an evaluation license.  EVAL in the image of production not supported.  This computer shuts down
  2015-11-05 15:33:36, WLM Service info received control message 5
  2015-11-05 15:33:36, Service Info WLM Reporting as 3 status
  2015-11-05 15:33:36, pulled out of WLM Info event.  Stopping service.
  2015-11-05 15:33:36, Service Info WLM Reporting 1 status
  2015-11-05 15:33:36, info WLM out ServiceMain.
  2015-11-05 15:33:36, info WLM Windows Embedded Licensing Monitoring Service is out.

  Help, please. Thank you.

  I believe that the error is to tell you that you can not migrate an eval version to a production version.  I suspect that you will have to wipe and install

  The license is not an evaluation license.  EVAL in the image of production not supported.  It stops immediately.

• Firefox loses Internet every 5-10 minutes (as for example, Skype does not work), and the only way to solve this is to reset the network adapter (reset DNS and get the new IP address?)

  I click with the right button on the icon of the network adapter and press "fix." After that, I can browse sites for 5-15 minutes. But then the story repeats itself. And all of this can happen while I will have a video chat on Skype, so the internet connection is OK.

  • Try this.
  • Type in the bar of address about: config.
  • Accept the warning.
  • On the page that appears, in the filter box, type Network.http.Max - connections.
  • Replace the value 32 (which is probably the value 256 in your case).
  • Close the topic: config page.
  • Restart the browser.