LaserJet Pro M177FW MFP never sleeps, Calibrates every 15-30 minutes

Similar Questions

• HP Color LaserJet MFP M177 Pro: Problems of analysis between iMac and HP Color LaserJet Pro M177fw MFP

  Hello

  I had no wifi problems between my Imac and HP Color LaserJet M177fw MFP Pro to scan until recently - it can be related to operating system update to OSX 10.11.4 which was done yesterday however.

  I can scan is no longer docyuments from the top of the charger page - scan starts but just hangs and then I can not re - activate the scan function until I have to force it to quit.

  Can you suggest appropriate corrective measures to try please?

  Thank you very much.

  Hello

  Make sure you have the latest drivers installed:

  In the Apple menu, click about this Mac, and then software update.

  Click on the main menu store reload the Page, and then select allow for the update check completed and install any publicly traded Apple / HP update.

  Then install problems with the products HP LaserJet on OS X El Capitan of scanning HP Software Update to address documents (ADF) automatic feeder:

  http://FTP.HP.com/pub/softlib/software12/OSX/HP_Easy_Start/Essentials/S/HP-printer-Essentials-S-4_5_0.pkg

  Kind regards

  Shlomi

• LaserJet Pro M177fw MFP: confirm the fax sent

  Is there a way for the printer to "beep" when a fax is sent successfully? Right now you have to look at the screen of the printer to confirm the fax has been sent successfully. Just old habit I guess.

  Hello @WaltGrosch,

  Welcome to the forums of HP.

  I understand you wanting to your M177fw "beep" when it sends a fax successfully.

  I would like to help.

  If it's a wonderful idea, the Laserjet printer does not have this ability.

  You can configure the printer to print a confirmation page when a fax is sent successfully.

  I agree that the tone would be better.

  To set the confirmation page, you can enter the menu setup then the fax menu.

  M177fw MFP-HP Color LaserJet Pro operating manual

• Color LaserJet Pro M177fw MFP: HP Color LaserJet Pro M177fw MFP is not not color copy

  Hello, I have a HP Color LaserJet Pro MFP M177fw, when I try to copy in color mode, the printer gives me the newspaper (on the LCD screen), color copy is limited. I did not have a password for the printer. and this error is seen when you use both scanner feeder and flat bed.

  I appreciate your comments and thank you in advance for your help

  Best,

  The gesture would be to try to restore the default settings of the control panel of the printer.  Conflicting configurations on disabling color copies would be destroyed and normal again.  Resets are normally under the admin menu or the control panel service.

• HP LaserJet Pro M177fw MFP: HP LaserJet MFP M177fw scan to pc Pro

  Just bought this printer and there is no scanning office about this function. The software would not even install disc or the full download of Web site features. Error message saying fatal to 99% configuration error, then the askes of program to close and restart the computer. I installed finally just different software on the site individually. It is not much use having a printer that can not scan to pc

  Hi @keicou,

  Thanks for getting back to me.

  I don't know if you've tried or not, but I would like to uninstall software and the driver that has been installed then retry the installation of the printer.

  Here is a document of support that can help you with the uninstall - uninstalling the software of the printer (Windows).

  Here is a link to the printer software and driver download page - HP Color LaserJet Pro MFP M177 series full software and drivers. The Web page should automatically detect which version of Windows your PC is running.

  Please let me know how it goes.

  If this helps you find a solution please click the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• LaserJet pro m177fw mfp: wireless connection to install

  I have a laptop of my work that is not a hard drive software to installthe to connect wireless to the printer. I was everywhere on the hp Web site to find a link without success. How can I get the laptop wireless connected to print to this printer without having to use the disc.

  Hello

  Please download the following drivers & the software and install it on your computer:

  http://ftp.HP.com/pub/softlib/software12/COL51592/kJ-124901-3/Color_LJPro_MFP_M177_full-solution_13295.exe

  More software and tools: http://support.hp.com/us-en/drivers/selfservice/HP-Color-LaserJet-Pro-MFP-M177-series/5303438/model/5303443#Z7_3054ICK0KGTE30AQO5O3KA30R1

  Kind regards.

• LaserJet Pro M177FW MFP: Laserjet Pro MFP M177FW stuck in initialization

  I bought a LaserJet MFP M177fw Pro a few days, and during installation, he immediately found himself in initialization mode. I tried to restart the printer and reinstalling the drivers, which are correctly installed according to my computer. It is plugged directly into a wall of output, not a surge protector and I have tried unplug, wait a minute and reconnecting.  I tried to update the firmware, but the installer think that the printer is in error mode and will not go forward. I scoured the forums HP but was not able to solve problems more.

  The scanner works fine when I said to scan from the desktop, then the computer and the device is certainly speak to one another.

  In addition, the printer is supposed to make a loud click and rapid when it is turned on?

  Thank you!

  Hi @SSI_Diver,

  Thanks for providing this information. You can Contact the Support HP to inquire about the service. Check the model number and the form to receive a file number for faster assistance. Thank you.

• Color Laserjet Pro M177fw MFP: HP Color Laserjet M177fw MFP Pro cool mood after printing all pages.

  I bought Color Laserjet MFP M177fw Pro for only 3 days. From the beginning he said impression... mood of cooldown and take a long paus. This issue takes place after printing each page. I use HP Toners. And my related directly to the wall socket (Electric).

  Please help me. It is urgent for me.

  Thanks in advance.

  Hi Ryans,

  Please check private Message

  I hope this helps you!

  +++ Say thank you by clicking on the star of congratulations in the post.

  Although I am an employee of HP, I speak for myself and not for HP.

• LaserJet Pro M177FW MFP: Laserjet Pro M177FW MFP control button does not work

  I've seen other messages on how to reset the printer to try to get the touch screen to work, but none of this does not work for me. It allows to work at the time of purchase, but after all these updates, it is not.

  Is there a way to send the copy command to the printer without using this form?

  Hi @jshelby41,

  Welcome to the Forums of HP Support! I see that you are having problems with the touch screen not working not. I want to help you solve this problem. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you wish, to say thank you for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

• HP Color LaserJet MFP M177 Pro: Cannot download the software for HP Color LaserJet Pro M177fw MFP

  Hello!

  I can't download the software.  I tried several times and breaks download about a quarter of the way through (attached image).  I tried to restart my computer, updating my OS to the newest.  I read through other suggestions for blog without result.

  I also tried to download Easy Scan on the App store, but it will not find the printer / scanner.  In the meantime, I am able to print to the printer / scanner without the software.

  Help, please!

  Alex

  

  Hello.

  Try to install the following package:

  https://support.Apple.com/kb/DL907?locale=en_US

  Then add you printer in Printers & Scanners, be sure to select your printer model from the menu drop-down use.

  Then try to print and try to use HP Easy Scan once more.

  You can see any difference?

• map m177fw: hp color laserjet pro m177fw mfp

  Hello

  I have the same problem as others. the printer is cooloing up often.

  you keep sending private message - just post publicly, I do not understand. We need a quick solution,

  or PM me too fast

  Thank you

  1. When the printer is on, remove the power cable at the back of the printer for one minute.
  2. After a minute, plug in the power to the printer.
  3. See if you still have the same problem with cool constant down after doing the above.

  If you still experience this issue, the next step would be to contact the HP Support directly. You can contact the HP Support by clicking here and filling out the form below.

  Please let me know the results after following the above.

• Color LaserJet Pro M177fw MFP - scanner

  PC - Windows 7 OS on Dell can't get scanner to initialize.  Works very well on the Compaq laptop but not on Dell desktop computer.  When from the icon on the desktop, says "The JL M177 Scan HP is not found".  Really frustrating not having not working on Dell and cannot continue to go to the laptop to do scans and then send to myself to store on Dell.  Aaauuugghhhh!  Any ideas.  Cannot find drivers scanner only for her.  Doesn't even help with plugging in the USB cable.

  Heads up guys!  My smart husband solved the problem with persistence.  He kept the program installation and must have picked up small pieces as it went along because it finally worked even though he says he had not installed.  Took it 10 hours, but he finally got the Dell to recognize the Scanner.  Woohoo!

• HP laserjet pro M177fw MFP

  printer stuck on initiallising. Help.

  Hi @guy11,.

  I see by your post that the printer is locked during initialization. I can help you with this.

  What happened before this error message? (paper jam, paper changed a toner)

  I would like to do a hard reset to see if that will solve the problem.

  Let the printer and disconnect the printer cable and the wall socket for 60 seconds.
  Reconnect the power cable to the output of the printer and the wall, and not a surge protector.
  This ensures that the printer is full on and can help this situation.

  Please check your messages for additional steps to try.
  In the forum next to your handle name simply click on the envelope to see.

  Good day!
  Thank you.

• Can I disable wi - fi on a HP LaserJet Pro 100 MFP M177fw color. My place of work does not.

  My workplace allows no wi - fi to be active on the printers. Features wi - fi color HP LaserJet Pro 100 MFP M177fw can be disabled?

  Hi ltyarr,

  I understand what you want to do but you can just turn off the wireless radio, or you can install a password for the network, and then disable the wireless radio.

  I have provided the manual for the Laserjet Pro 100 color MFP M177fw. The specialized section

  Safety features of the product to the 56 page allows you to configure the wireless and password protect the network. You can disable the wireless radio and no one could access or set up a network without password.

  MULTIFUNCTION COLOR LASERJET PRO.

  Good day.

• Pro M177fw MFP stuck on initializing

  Brand new, right out of the box. Here's what I saw: the initialization is not complete, but I can tap on the Home icon. Noticed a symbol above the button of toner. Please I need your help fast. Thank you

  Hi @SangPham,

  Welcome to the Forums of HP Support!

  I understand that you are having problems getting your new HP Color LaserJet M177fw MFP Printer Pro installation. I would be glad to help and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I see that has not finished initializing and toner light is to inform you of a problem. It seems that some packing material has not been removed. Please take a second look.

  Use this guide to get instructions on how to properly load the toner cartridge in the printer: setting printer to printers HP Color LaserJet Pro M177fw multifunctional material upward.

  If the problem persists, please contact HP or put the printer in the point of sale.

  Contact HP for service in all countries except Asia-Pacific.
  What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  File number and phone number are displayed.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!