Similar Questions

• How IMAQ to convert pixel to work in the real world?

  Hello

  I wonder how IMAQ to convert pixel to work in the real world?

  See the example for vision Calibration.vi Simple, is the actual formula used by "IMAQ convert from pixel to the real world" will receive the axis (mm) calibration of the axis of the image (pixel)? What calibration information is used in the formula.

  You are looking at this thing?

  https://zone.NI.com/reference/en-XX/help/370281M-01/nivisionlvbasics/perspective_and_nonlinear_disto...

• Multisim to interface with the real world material

  Hello

  View of Lab is a completely new software for me... I'm trying to findout, is it possible to interface multisim with labview for harware reald circuit I need to design to test the operation and test the parameters of an operational amplifiers real automated using the events of the loop. Could someone help me please

  This is the response I got from the technical support of OR

  "Although it is technically possible to use Multisim and LabVIEW with real data, we do not recommend it."  Multisim is not a simulator in real time and even for a small circuit, it would take the Simulator several minutes to produce a second, a data value. Since then, Multisim is simply too slow when compare the time in the real world, your application will be not very reliable. »

• How to determine the real colors in a black and white photo?

  I don't know if I'm in the right section, but I wonder if it is possible to use an Adobe program to restore real colors in a black and white photo? I want to add color by imagining or guess; I need determine the real colors. This may not even be possible, but if this is the case, please tell me what I can use.

  Thank you.

  That's where the art comes into play when they colorize old movies.

  A lady wearing a pretty dress: is it greeen or purple?  It seems gray.

  A baby comes home from the new baby clothes cute hospital: pink or blue?  They have light gray air.

  It's a nice tie school the guys to wear: use the colors wrong on the bands, and it is in a different school.  But they are nothing more than various shades of gray.

  If there is one thing missing in a B & W photograph, every vestige of the color information.   All you have is gray.   You may need TO determine the real colors, but without a color photo to use as a reference image, you are out of luck.

• Proved the practical suggestion: physical to virtual (P2V) migration preparation and success - a guide to the real world experience.

  (Current and evolving paper)

  I propose to publish a paper on the key factors to do a P2V project run as smooth as possible and complete timely. The reason? According to me, there is a gap in the confidence of the SMB in the start-up of an operation of codification (in any form) of a Virtual Infrastructure.

  The document is not intended to be a step by step guide but to contain the following topics: by commercial considerations, operational requirements, review, target, during Migration, Communication tools and procedures P2V environment.

  This publication will be sprinkled with real-world examples of how a general text book approach doesn't always work with pointers on how to opt out of the most common misconceptions.

  Two high-pressure and successful migration (a merger and a disaster recovery / business continuity gap) will be the basis of the experience I'll shoot of.

  Comments and thoughts are valued for:

  The...

  (1) target audience.

  (2) the structure.

  (3) the style of output.

  (4) the notice of application for this document.

  Kind regards

  Darren.

  BUZZ!

• Advice for the real world test device

  I keep running into problems of developing applications of BB where my code works perfectly well on all simulators, but as soon as I do the direct product of dozens of reports to be "unable to connect" is from (or another bug) flood from a random set of devices (the last wave is of Tower owners on Sprint and of course the app works fine on the tower for the Sprint Simulator using the same operating system) I am not able to go out and buy a Blackberry for all models on the carrier, and the labor to do these tests is beyond what my company can manage anyway.

  I'm looking for is advice of some experienced developers.  What do you do to get around this?  How do you verify that your code will run on real devices?  When you get hit by a real single bug, how to solve it?

  Thank you

  ~ NN

  Agree with Simon.

  deviceAnywhere is one that comes to mind, there are at least another company that was in the penultimate a DevCon, but I don't remember his name.

  Each new customer has a new experience with networking and you slowly build your code to handle the case.  Have to say that we are lucky, because we mainly deal with businesses, so use BES connections for most.  And the United Kingdom, there are only 5 carriers, so it is easy to code a quick test and determine what APN settings to use for each.

  Debug object, a method I would recommend is to write your own journal and provide your users with an easy way to email it to you.  Indeed, offer to send when you know you have a problem.

• The real world Z30 blackBerry battery

  What is the use of the normal battery of a Z30 (can it last a full day with moderate to heavy use)? I have a Windows Phone 8, battery life is very good (was able to go more than 30 hours with moderate use). Before Android, battery wouldn't last more than 12 hours (on average), with light to moderate use.

  I get two full days of use with my Z30, and with her being on it during the night. I was not able to kill the battery in one day, no matter how hard I tried (and tried). You will NOT be disappointed with the Z30 battery... it's one of the features of the phone sale.

  See you soon.

• Experience the real world of vSAN to Production environments

  Hello

  I'm looking by putting forward a case to migrate an old HP EVA SAN company, to vSAN6 class. I'd really like some comments from those experienced with running the VSAN1 in their environments on its reliability and performance, and if they would consider worthy of a production environment VSAN6?

  Have you had a lot of pinch, or major problems with vSAN points?

  You give a target... we run in the order of 120 of average size Windows virtual machines in each of 2 data centers (which require 12 TB of storage in each ms) and would seek to 2 x 4 host VSANS loan node clusters.

  Would appreciate any input.

  Thank you

  We went with the config 'High' of Dell, with a few tweaks.  We have added 2 discs so that we had the max of 7 per disk group.  And we exchanged the Perc card a LSI 9207-8i.  Media LSI cross so we can hot swap drives when they fail.  PERC does not support RAID 0 to go down the server to share a drive.  As I said, in my rear view I would have 6 R720s instead of the R820s 3.

  Regarding the FTT, you can set per virtual machine so level 1 VMs get FTT = 2 and Test/Dev gets FTT = 1.

  Strange that you can not get them to the United Kingdom.  I guess you could just it build with your favorite retailer.  You do not have the convenience of 1 Reference, but you can get the right equipment.

  We have 2 1Gb dual port NIC for management and VM traffic goes to a stack of 3850 X Cisco switch.  We then 2 10 GB dual port NIC for vSAN goes to a stack of switch Dell 4032.  REALLY like the Dell switches, a lot of value for the price.

  Finished our about 60 k USD, but if I would have been to 6 knots, then each node would have about 35 k.  Your price sounds just for me.

  Thank you, Zach.

• SQL Plan Management - tips from the real world?

  Hi all
  
  I was wondering if anyone had any practice with SQL Plan Management in 11 GR 2? Specifically, we seek to implement this in an environment of Exadata.
  
  After reading the manual, I have a few questions:
  
  -Is it possible to stop the plan history to consume barrel loads of space SYSAUX? I know that:
  
  + "A weekly background process measures the total space occupied by the SQL Management database, and when the set limit is exceeded, the process will generate a warning in the alerts log" +
  
  That's great, but it does not stop the limit being exceeded, so I was wondering whether or not there was this ability?
  
  -How long it tends to take for the SQL plans to 'navigate' automatically? If the optimizer sees a new plan for a statement and it is good, how much time is the period of 'prove' before it implements the SQL plan? (I suspect it's as my asking ' how long is a piece of string? ', but it's a worth a try)
  
  -Has a significant performance impact whenever it collects all the plans at first?
  
  -I guess if I decide that it is not for us, I can change the setting optimizer_use_sql_plan_baselines and following the instructions in MOS 790039.1 to abandon the repository? It is not all the additional measures "clean"?
  
  Mark

  This google might be directed to some interesting things:

  kerry osborne management plan

  See the links in the Enkitec doc.

• All power back on "LabVIEW: [connected] A Real World integration Developer Guide.

  Any comments on

  "LabVIEW: Guide the developer in the real world integration [connected].
  "  ?

  IMHO, the course of LV connectivity and you know as much as the authors - perhaps more.

  Mike...

• FSX Real World Weather is not updated

  I noticed, for about 3 weeks now the real world the weather on my FSX is not updated, even if it's the connection to the server and time to load correctly. The time is the same that it was 3-4 weeks, but I'm looking on the outside and it is very different! I have cleared my history and the browser cache, deleted all of my temporary files and nothing seems to solve the problem. Now this is extremely frustrating - welcomed the help!

  Hi tombeckett2285,
   
  Please follow the steps described in this article, as this seems to be a known problem and the steps in the article should help you to solve the problem.
   
  Known issues with the Real-World Weather in Flight Simulator feature
  http://support.Microsoft.com/kb/841214
  
  Aziz Nadeem - Microsoft Support

• Real world VLSM?

  Hi guys

  I'm studying for my CCENT and need a little help. I am struggling with the concept of VSLM. I know how it works and I can set it up but I am struggling to find out when it would be used in the real world other than to the ISP.

  For example, if I had a 10 network VLAN and 200 guests by VLAN could ' t I just use the below?

  192.168.1.0/24 VLAN 1

  192.168.2.0/24 VLAN 2

  etc.

  I think small?

  Can someone give me some real world examples of when to use VLSM and why?

  Thanks in advance.

  Yes, of course if you have 200 guests, you can go with the model you specified above. World real VLSM, I can give you a base case for both routers. R1 and R2 are connected together, no other host has access to this segment because they are directly related. It makes no sense using a set of 24, which is 251 host addresses will lose, imagine a large-scale network, with many routers from point to point. Hmm, a lot of waste!

  So whereas we choose a 30, with only 2 host addresses, a subnet address and address of dissemination, and we can calve until our 24 or something else perhaps, more effectively.

  Regarding the public IP (no RFC1918) some ISPS and company go with 31, no network address, no broadcast address. Just two addresses to host. It's how tight, we now for IPv4 address space.

• Model real world observer in the CF?

  I'll put together some course material for my companions to desktop on design patterns in ColdFusion. I'm having a hard time coming up with an real realistic example of what situations would be a good candidate to be resolved by a model of an observer in a CF web app.  There are certainly many examples of how to implement the model in the CF, which is great, except that I don't really find a lot of scenarios that the examples are based off of meaning in a web application environment - many of them are based on Java examples where references to the observer/observable objects are maintained for life (session) of the application.

  In a CF web app, this seems as it would only make sense if you were dealing with Singletons for objects of the observer and the observed so that their references to exist outside the scope of a single page from loading.  However, I'm having a conceptual block to come with a pressing problem on why you need an observer as part of a single page model CF.

  I'd like to hear other devs CF come into contact with any real world examples.  I'm sure that I could probably something like LogBox refer to as an example of the behavior, but I was hoping for a very simple example that I could use, put a code in front of my developers.

  Thanks in advance!

  -Michael

  A few years ago, when I, too, was grappling with design patterns, I found a few useful items from Microsoft MSDN. One of them, the paper by Doug Purdy and Jeffrey Richter on the model of the observer, is very good and contains an example of the stock market.

  I don't see how you arrive at singletons for observers. More on that in a moment. The essence of the observer model exceeds the programming language, syntax or implementation details. All what you need to know is in the scheme of traditional patterns (which I reproduce here of Wikipedia on the model of the observer).

  

  Indeed, the diagram itself is very suggestive and can help you find examples of your own. There are 2 main roles, the observer and the object. There is a dependence as little as possible (i.e. loose coupling) between them. This allows either to change their internal mechanisms without affecting the other.

  At its most simple, with only 2 roles, the observer observes the subject. The subject has to turn standby on a dynamic resource which the observer wants to know.

  In most practical applications, there is more than one observer interested in the dynamics of resources. The subject has the responsibility to inform each of the resource, or any change observer. To be able to do so, it maintains a list of observers. Each observer has a responsibility to be notified by the subject. That's all. It is said that any system that works in this way, apply the model of the observer.

  The example of most common practice is a newspaper publisher and the subscribers. The Publisher made the object, the observer subscriber, and news from the dynamics of resources. In fact, much like Hoover became synonymous for vacuum cleaners, so too has Publisher-Subscriber become a synonym for the model of the observer.

  Let go of the need for a coupling between the observer and the object means that none of them should use shared or global variables. These variables create tighter form of coupling possible. So back to the issue of giving observer using a singleton or not. I wouldn't do it. Absolutely not. A singleton is an application-scope variable, so shared and would be pairing.

  To keep the loose coupling, it is usually recommended to implement the observer and the object as an interface. Classes representing the actual topic and concrete observer would then be the attention of implementers of the respective interfaces. Each of these concrete classes could radically change its internal structure, and the outside world would not notice. This is because the respective interface for the observer and the subject remains intact.

  Now to the Enigma of a practical example of the observer model in the context of a future ColdFusion page. In the model of the observer, the subject is of necessity an earpiece, listening on a dynamic resource object. Therefore, the ColdFusion page that represents the object must be a listener CFC. There is already an example built into ColdFusion. It's the DirectoryWatcher event gateway. Use inheritance to adapt to the CFC to include features in order to maintain a list of observers in the database. Include, for example, requests to inform observers by email whenever a change occurs in a directory.

• cRIO and 9234 modules do not work or communicate via fpga with accelerometers, fpga, connected to the real-time application is also related to shared variables related to modbus slave

  Hello

  I have a compact rio, which has a 4 way frame this chassis is the three modules of ni9234, they are related using FPGAs for application in real time, then using shared variables in the low-speed loop associated with a slave modbus to communicate with the domain controllers, the nor 9234 accelerometers linked to them with option ac coupled iepe on c modules , my problem is the real-time application seems to work well even when power loss occurs it restarts without problem and the fpga written hard disk portable bin files very well, but without an accelerometer connected I get readings of low noise as soon as I connect an accelerometer to one of the outputs 10 it just goes to a fixed number (0.03125) as soon as you unplug it again He returned to readout noise, I ran a scan on the modules and get only a spike when I connect or disconnect the accelerometer, I tested voltage at the pins on the module and I get 22 volts CC which makes it more likely that the material is not the problem, but software is perhaps the cause to hang up, I join the project and files for your perusal. I also realized a new project which, in mode directly linked scan has the module entry in the shared variable and the scenerio even once again. Help would be appretiated.

  Thank you very much

  Jason

  Whren using waveform with the 9234 acquisition, we recommend the following FPGA and RT model.

  http://sine.NI.com/NIPs/CDs/view/p/lang/en/NID/209114

  It can be extended as a datalogger with:

  http://zone.NI.com/DevZone/CDA/EPD/p/ID/6388

  or using shared variables combined with the analytical engine

  http://zone.NI.com/DevZone/CDA/tut/p/ID/9851

  The FPGA in all this, as well as the framework of RT have used successfully by 1000s of users.  I recommend giving these a try.

• Unable to determine the correct Content Type or length when connecting via HTTP

  Right now I'm developing a streaming audio application.

  And I have the resources and the sample apps u.

  Then when I open a connection and I print the content type of the page that contains the audio file

  It shows a text/plain type.

  The length is also displayed but bad as: 24.

  So basically it is not consider as an audio file.

  Next when I try a random url like http://www.google.com

  The length is always-1. (impossible to determine the length)

  The content type is correct.

  And when I pass some invalid/non-existent url, it gives a number at random. like 29 or 39.

  Suggestions/ideas?

  Thank you

  http 413 error. Take a look at this thread:

  http://supportforums.BlackBerry.com/T5/Java-development/increase-MDS-CS-limit-on-http-download-size/...