Similar Questions

• How IMAQ to convert pixel to work in the real world?

  Hello

  I wonder how IMAQ to convert pixel to work in the real world?

  See the example for vision Calibration.vi Simple, is the actual formula used by "IMAQ convert from pixel to the real world" will receive the axis (mm) calibration of the axis of the image (pixel)? What calibration information is used in the formula.

  You are looking at this thing?

  https://zone.NI.com/reference/en-XX/help/370281M-01/nivisionlvbasics/perspective_and_nonlinear_disto...

• Multisim to interface with the real world material

  Hello

  View of Lab is a completely new software for me... I'm trying to findout, is it possible to interface multisim with labview for harware reald circuit I need to design to test the operation and test the parameters of an operational amplifiers real automated using the events of the loop. Could someone help me please

  This is the response I got from the technical support of OR

  "Although it is technically possible to use Multisim and LabVIEW with real data, we do not recommend it."  Multisim is not a simulator in real time and even for a small circuit, it would take the Simulator several minutes to produce a second, a data value. Since then, Multisim is simply too slow when compare the time in the real world, your application will be not very reliable. »

• WRT1900AC: Determine the real world IP via Smart Wi - Fi?

  I have a router 1900AC. I can manage it remotely via Smart Wi - Fi (www.linksyssmartwifi.com). However, I have not discovered a way in the user interface to determine what is the IP of my router, when I'm out and about.

  You'd think something would be the State of the surface network widget frankly, or perhaps been under connectivity or Internet settings... but it's not.

  I can't find my IP 'real world' anywhere in the UI Smart Wi - Fi.

  Suggestions?

  Troubleshooting-online status-online report-Internet connection-online Internet address online

• Red Star of blackBerry Smartphones on the "my world"icon on the app world for blackberry

  I use a bb bold 9900 and have installed Blackberry world appsince long... Normally the 'my world' icon wears a red star when I upgrade to a few app waiting... I see the star, but can't find any application upgrade

  version of the 7.1.0.1033 software

  Platform 5.1.0.692

  Thanks a lot for help

  Thank you very much it worked

  René

• Proved the practical suggestion: physical to virtual (P2V) migration preparation and success - a guide to the real world experience.

  (Current and evolving paper)

  I propose to publish a paper on the key factors to do a P2V project run as smooth as possible and complete timely. The reason? According to me, there is a gap in the confidence of the SMB in the start-up of an operation of codification (in any form) of a Virtual Infrastructure.

  The document is not intended to be a step by step guide but to contain the following topics: by commercial considerations, operational requirements, review, target, during Migration, Communication tools and procedures P2V environment.

  This publication will be sprinkled with real-world examples of how a general text book approach doesn't always work with pointers on how to opt out of the most common misconceptions.

  Two high-pressure and successful migration (a merger and a disaster recovery / business continuity gap) will be the basis of the experience I'll shoot of.

  Comments and thoughts are valued for:

  The...

  (1) target audience.

  (2) the structure.

  (3) the style of output.

  (4) the notice of application for this document.

  Kind regards

  Darren.

  BUZZ!

• Z30 Z30 blackBerry battery

  Anyone know if there is a way to wrong/right to change the Z30 to minimize damage?

  1 - top (load) when possible

  or

  2 - flow as much as possible before loading

  also, is it harmful to the battery leave it plugged all the time (to load).

  You can learn a lot about the battery here

  http://supportforums.BlackBerry.com/T5/BlackBerry-PlayBook/lithium-battery-myths-dispelled/TD-p/1043...

• Advice for the real world test device

  I keep running into problems of developing applications of BB where my code works perfectly well on all simulators, but as soon as I do the direct product of dozens of reports to be "unable to connect" is from (or another bug) flood from a random set of devices (the last wave is of Tower owners on Sprint and of course the app works fine on the tower for the Sprint Simulator using the same operating system) I am not able to go out and buy a Blackberry for all models on the carrier, and the labor to do these tests is beyond what my company can manage anyway.

  I'm looking for is advice of some experienced developers.  What do you do to get around this?  How do you verify that your code will run on real devices?  When you get hit by a real single bug, how to solve it?

  Thank you

  ~ NN

  Agree with Simon.

  deviceAnywhere is one that comes to mind, there are at least another company that was in the penultimate a DevCon, but I don't remember his name.

  Each new customer has a new experience with networking and you slowly build your code to handle the case.  Have to say that we are lucky, because we mainly deal with businesses, so use BES connections for most.  And the United Kingdom, there are only 5 carriers, so it is easy to code a quick test and determine what APN settings to use for each.

  Debug object, a method I would recommend is to write your own journal and provide your users with an easy way to email it to you.  Indeed, offer to send when you know you have a problem.

• Cannot remove the shortcut from the App World for blackBerry Smartphones

  I have a Blackberry Curve 8330 and install Blackberry App World yesterday. I decided to remove it, so I went to the Options > Advanced Options > Applications, highlighted and selected delete. Then I rebooted my Blackberry as he asked, saying that the app would disappear. The app has been removed from my list of requests under the Options menu, but again, the shortcut is displayed on my desk and takes me to the screen "Download App World" when I click on it.

  I can't figure out how to remove the shortcut because it is more listed in my applications. What I just hide or y at - there a way to remove it? Any ideas?

  Thanks in advance!

  What is left is just a shortcut to the installation link for AppWorld.

  Just hide it

• Replacing the screen LCD Z30 blackBerry for Z30

  I can't find the support Web site of the spare parts for my 30 Z in the Blackberry.ca. I am looking to buy a replacement screen LCD for my BlackBerry 30 Z if possible or any company that sells official part, I can do it myself, I just want to buy, thanks

  As Leslie said, eBay and Amazon have them, I've seen them for $45 - $70 each.

  Make sure that you don't get the Verizon version, you want the GSM model which is more common.

  I replaced mine and helped a friend with a replacement, it is a very simple process to remove the 8 screws and using a pry tool to open the back, disconnect the ribbon cable and then turn everything above.

  Good luck.

• Version of the restore software Z30 blackBerry 10.2.1.2102 a downgrade to prove if the camera back is defective.

  Dear community,

  Having just bought recentlly the Z30 once connected to the internet immediately, he went for an upgrade of software to 10.2.1.2102.I then continued to test all the features on the phone to see that my rear camera did not work. I immediately jumped on a forum and found there are others who have experienced a few problems too. I thien tried in vain to reload the software, soft and resets hard have been applied, but to no avail. I have no idea whether or not the rear camera is defective. Then I tried the BBVE and it failed the test of the camera back. Incidentally when rear camera mode it says mode scren failed, camera not found or flash failed. I then need ot a hardware reset in FLIGHT by applying the flight towards the top and the low UNLIMITED to perform a reset which releases all of the applications in use.

  I also read that there could be problems with the memory card so I removed this option to eliminate the problem.

  Not sure if there are defective batches of stock out there but I bought my phone on ebay and he said: PRD-52977-013 manufactured in Mexico 5110913.

  I don't know if the machine worked before the software load went in asking so therefore how to recharge the old version of the software to a version where I can see if the device works or not.

  p.s. The phone I bought was sim free and I use it on the Vodafone UK network and the box was sealed if the seller would have no prior knowledge of the handset, as it was purchased New.

  Thank you

  Allan

  I think you're right. The problem is with the hardware. I see nothing else to try, diagnostics say camera problem. Maybe the seller may exchange it?

• Experience the real world of vSAN to Production environments

  Hello

  I'm looking by putting forward a case to migrate an old HP EVA SAN company, to vSAN6 class. I'd really like some comments from those experienced with running the VSAN1 in their environments on its reliability and performance, and if they would consider worthy of a production environment VSAN6?

  Have you had a lot of pinch, or major problems with vSAN points?

  You give a target... we run in the order of 120 of average size Windows virtual machines in each of 2 data centers (which require 12 TB of storage in each ms) and would seek to 2 x 4 host VSANS loan node clusters.

  Would appreciate any input.

  Thank you

  We went with the config 'High' of Dell, with a few tweaks.  We have added 2 discs so that we had the max of 7 per disk group.  And we exchanged the Perc card a LSI 9207-8i.  Media LSI cross so we can hot swap drives when they fail.  PERC does not support RAID 0 to go down the server to share a drive.  As I said, in my rear view I would have 6 R720s instead of the R820s 3.

  Regarding the FTT, you can set per virtual machine so level 1 VMs get FTT = 2 and Test/Dev gets FTT = 1.

  Strange that you can not get them to the United Kingdom.  I guess you could just it build with your favorite retailer.  You do not have the convenience of 1 Reference, but you can get the right equipment.

  We have 2 1Gb dual port NIC for management and VM traffic goes to a stack of 3850 X Cisco switch.  We then 2 10 GB dual port NIC for vSAN goes to a stack of switch Dell 4032.  REALLY like the Dell switches, a lot of value for the price.

  Finished our about 60 k USD, but if I would have been to 6 knots, then each node would have about 35 k.  Your price sounds just for me.

  Thank you, Zach.

• SQL Plan Management - tips from the real world?

  Hi all
  
  I was wondering if anyone had any practice with SQL Plan Management in 11 GR 2? Specifically, we seek to implement this in an environment of Exadata.
  
  After reading the manual, I have a few questions:
  
  -Is it possible to stop the plan history to consume barrel loads of space SYSAUX? I know that:
  
  + "A weekly background process measures the total space occupied by the SQL Management database, and when the set limit is exceeded, the process will generate a warning in the alerts log" +
  
  That's great, but it does not stop the limit being exceeded, so I was wondering whether or not there was this ability?
  
  -How long it tends to take for the SQL plans to 'navigate' automatically? If the optimizer sees a new plan for a statement and it is good, how much time is the period of 'prove' before it implements the SQL plan? (I suspect it's as my asking ' how long is a piece of string? ', but it's a worth a try)
  
  -Has a significant performance impact whenever it collects all the plans at first?
  
  -I guess if I decide that it is not for us, I can change the setting optimizer_use_sql_plan_baselines and following the instructions in MOS 790039.1 to abandon the repository? It is not all the additional measures "clean"?
  
  Mark

  This google might be directed to some interesting things:

  kerry osborne management plan

  See the links in the Enkitec doc.

• All power back on "LabVIEW: [connected] A Real World integration Developer Guide.

  Any comments on

  "LabVIEW: Guide the developer in the real world integration [connected].
  "  ?

  IMHO, the course of LV connectivity and you know as much as the authors - perhaps more.

  Mike...

• FSX Real World Weather is not updated

  I noticed, for about 3 weeks now the real world the weather on my FSX is not updated, even if it's the connection to the server and time to load correctly. The time is the same that it was 3-4 weeks, but I'm looking on the outside and it is very different! I have cleared my history and the browser cache, deleted all of my temporary files and nothing seems to solve the problem. Now this is extremely frustrating - welcomed the help!

  Hi tombeckett2285,
   
  Please follow the steps described in this article, as this seems to be a known problem and the steps in the article should help you to solve the problem.
   
  Known issues with the Real-World Weather in Flight Simulator feature
  http://support.Microsoft.com/kb/841214
  
  Aziz Nadeem - Microsoft Support