Satellite A110-275 restarts after a stop on the current

Similar Questions

• Cannot start my Satellite A110-275

  Hello

  I had one laptop Satellite A110-275. After the first days, when I bought someone spilled a glass of water. I send the laptop on a center here in Canada they have change the motherboard. Laptop worked for several months and a few weeks ago are starting to make me a problem such as:
  I start it and everything seems ok all lights are blue lit, I hear when the beginning of the video card fan and nothing appears on the screen.

  In the past after a few opening and closing laptop computer started but now its saying DEAD leds.
  Could be the processor or even once the motherboard? I already changed the 2 GB memory and nothing.
  Could someone help me with some ideas?
  Thanks in advance.

  Processor A110 - 275 Intel Core Duo T2400 satellite clocked at 1.83 GHz 2 GB of 533 MHz DDR2
  Thank you

  Hello Marina

  Please don't get me wrong, but I don't think there is that you can only do about it.
  Of course, there is a serious hardware problem, probably with the motherboard. I don't know which component is troublemaker, but if your computer laptop doesn't react at all, it can be electronic power supply.

  It may be the CPU. It may be the motherboard, but you must understand that it is not possible to provide an accurate diagnosis on this path. What you need is a professional help. Laptop must be controlled by diagnostic tools and it can be done in only authorized service. Contact them and explain the situation.

• Satellite A110-180 - fan starts but stops after a few seconds

  Hello

  I have a Toshiba Satellite A110-180 and when I turn on the computer, the fan turns on but it stops in a few seconds and starts again in a while and stops again and starts... Then the laptop gets heat quickly.

  I bought the laptop about 5 years ago, so I think the problem is the fan or the circuit that controls the fan. Can someone who has had the same problem make sure that the fan is the problem?

  The fan part number is ATZHG000500. Does anyone know if a fan with P/N ATZHG000100 is compatible with my laptop, or if I can use another fan?

  Thanks for your help,

  Hey Wiley,

  First of all it of normal that the fan starts and after a few seconds, or 1 minute stops. Depending on the programs you run again the departure of fan after a few seconds or minutes. So, theoretically, it of normal what is happening.

  But if your laptop is almost 5 years old, you should try to clean. So I can recommend jet of compressed air. This could blow out the dust from the cooling fans. It is very cheap but very useful.
  Check it!

  In addition, I think that the thermal paste should be renewed a technicians authorized laptop can help you and answer if the other fan part number fits in your laptop. :)

• Satellite A110-275: more a low-memory graphics card after BIOS 1.30 update

  Hello

  I am the owner of:
  Satellite A110-275
  Part number: PSAB0E-00T00TEN
  graphics card intel gma 945 up to 128 MB.

  Recently, I updated the bios of 1.20 to 1.30 and after reboot, I lost 64 megabytes of 'graphics card capabilities.
  After bios update, my computer is much lower. Why? How can one get 128 MB of memory on my intel gma 945?

  also s it is possible to manually change a file and configure gma 945 capacities up to 256 MB? I have a lot of ram and I could use it for games, now I can use only 8 to 64 MB.

  Concerning
  Piter

  Hello Pit

  I posted my opinion that I don't think there could be a problem in your second topic.
  As far as I know the laptop came with graphics card Intel shared memory. 8-128 MB of memory could be chosen.

  To my knowledge the Intel driver graphics card automatically controls the value of memory sheared. If need more than MB of graphics card memory so it will be assigned automatically.

  PS: In my opinion it is not possible to select 256 MB because the hardware does not support.

• Satellite A110 - BIOS password after update BIOS interruption

  Hello

  I have a Satellite A110, I did a flash update using the Phoenix utility within windows XP. Upgrade flash my office, I need to disconnect the battery to be placed to restart the laptop. After that whenever I try to turn on the laptop it ask me a password on the BIOS but I never put a password in the BIOS.

  How can I please?

  See you soon,.

  David

  Hello David

  I believe that no one here can say with certainty what was happen exactly after the update of the BIOS. The fact is that the BIOS password can be removed by service provider only. Contact the nearest service provider and explain the situation.

  I'm sure they can know what was happen exactly and help you remove the BIOS password.

• Satellite A110-275: can I use FAT32 instead of NTFS with recovery CD?

  Satellite A110-275
  Can I use the file system fat32 instead of ntfs disk recovery system.

  Hello

  Well, on the Toshiba Recovery CD you will find only the ghosts.
  This ghost files contains image with all the files and data from HARD drive.
  I guess that the image was made on NTFS.

  I think it s not able to change the file system on the HARD disk without formatting or losing data on this HARD drive.
  If you want to change the FAT32 file system, you must format the HDD to FAT32.

  But I put t know why you want to do. It makes no sense to me.
  In my opinion, the NTFS system is more powerful than FAT32

• Satellite A110-275 - is it compatible with Windows 7 or not?

  Hello

  I would like to know, is the Satellite A110-275 for computer laptop windows 7 compatible? I can't see this series in the Web of Toshiba site "Download Windows 7 drivers".

  If not, is it possible, that it could be made compatible?

  Thanks for your help.

  Raja

  Hello

  To be honest, I don't know if it's compatible, but as I know that most Vista drivers work fine with 7 too.

• Re: Impossible to turn on the Satellite A110-275

  Hello

  I was using my laptop 100% fine last night and this morning it just will not light. I plug it into the "connected" light comes on as usual but the battery charging light does not work and the power button does nothing... Help?

  Any ideas would be appreciated, as I like my XP Satellite A110-275.

  Hi iam12volt

  Sometimes this happens to other laptops as well... In most cases, remove the battery for 5 minutes, can do the trick. (disconnect the power cable as well)

  See you soon

• PSL40E xp restarts after a stop only on the power supply current

  Uncheck the automatically restart in the system failure section
  Disable wake up LAN
  Disable installation
  SP2 or sp3, same problem
  Install any drivers
  knowledge microsoft (Roxios Easy CD...) same problem, restart after a stop

  Bios Flash, SM bios for vista and win 7, but not for xp on page drivers toshiba...

  This occurs when the LAN cable is connected to your laptop only?

• Satellite A110-275: digital recording of cassettes

  I have a Sat Pro A110-275. Nothing else added. Can someone tell me how I can use it to record tapes to a digital format? What should I buy material additionl / software?

  See you soon

  Kilfinnan

  Hello

  Are you sure it's a Satellite Pro A110-275 and not Satellite A110-275?
  I found only a Satellite A110-275!

  In addition the tapes you want to turn into a digital format?
  VHS or audio only?

  As far as I know this device supports only a tv out port. In this case, you are only able to send a signal to TV but do not receive all the signals.
  In my opinion you will need a 3rd party card PCMICA or any device which is capable of receiving video or audio signals (to jack)

• The computer was restarted after a bugcheck. The bugcheck was: 0x00000001 (0 x 0000000000000000, 0 0000000000000001, 0x00000000742d2e09, 0xfffff8800aa00b60).

  Computer BSOD'd 2 x today.  The event log States:

  The computer was restarted after a bugcheck. The bugcheck was: 0x00000001 (0 x 0000000000000000, 0 0000000000000001, 0x00000000742d2e09, 0xfffff8800aa00b60).

  LEAPC_INDEX_MISMATCHERREUR (1)
  This is an internal error in the kernel. The most common reason to see this
  error checking is when a file system or a driver has several mismatched
  visits to disable and re-enable the TTB. The data key item is the
  Thread-> CombinedApcDisable field. It's two separate 16-bit
  the SpecialApcDisable and the KernelApcDisable fields. A negative value
  either indicates that a driver has disabled APC normal or special
  (respectively) without reactivation; a positive value indicates that
  a driver allowed normal or special APCS (respectively) too many times.
  Arguments:
  Arg1: 00000000742d2e09, address of function or worker system call
  Arg2: 0000000000000000, thread-> ApcStateIndex
  Arg3: 0000000000000001 (thread-> SpecialApcDisable < 16)="" |="" thread-=""> KernelApcDisable)
  Arg4: fffff8800aa00b60, call type (system call 0-, 1 - routine worker)

  Debugging information:
  ------------------

  TRIAGER: Could not open the file of triage: e:\dump_analysis\program\triage\modclass.ini, error 2

  FAULTING_IP:
  + 0
  00000000' 742d2e09?              ???

  DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT

  BUGCHECK_STR: 0X1

  Nom_processus: ccSvcHst.exe

  CURRENT_IRQL: 0

  LAST_CONTROL_TRANSFER: from fffff800032841a9 to fffff80003284c00

  STACK_TEXT:
  fffff880 '0aa00928 fffff800' 032841a 9: 00000000'00000001 00000000' 742d2e09 00000000'00000000 00000000'00000001: nt! KeBugCheckEx
  fffff880 '0aa00930 fffff800' 032840e0: 00000000'00001 c 48 00000000' 0780e0a8 00000000' 0780e970 00000980'00000018: nt! KiBugCheckDispatch + 0 x 69
  fffff880 '0aa00a70 00000000' 742d2e09: 00000000'00000000 00000000'00000000 00000000'00000000 00000000'00000000: nt! KiSystemServiceExit + 0 x 245
  00000000' 0780e9b8 00000000'00000000: 00000000'00000000 00000000'00000000 00000000'00000000 00000000'00000000: 0x742d2e09

  STACK_COMMAND: kb

  FOLLOWUP_IP:
  NT! KiSystemServiceExit + 245
  fffff800'032840e0 4883ec50 sub rsp, 50 h

  SYMBOL_STACK_INDEX: 2

  SYMBOL_NAME: nt! KiSystemServiceExit + 245

  FOLLOWUP_NAME: MachineOwner

  MODULE_NAME: nt

  Nom_image: ntkrnlmp.exe

  DEBUG_FLR_IMAGE_TIMESTAMP: 5684191c

  FAILURE_BUCKET_ID: X64_0x1_SysCallNum_4_nt! KiSystemServiceExit + 245

  BUCKET_ID: X64_0x1_SysCallNum_4_nt! KiSystemServiceExit + 245

  These accidents were related to the corruption of memory (probably caused by a driver).

  Run these two tests to check your memory and find which driver is causing the problem.  Launch auditor.  You don't need to run memtest again unless the auditor is not the cause, or you want to.

  If you are overclocking anything reset by default before running these tests.
  In other words STOP! If you don't know what it means that you're probably not  
  
  
  
  
  1-Driver Verifier (for full instructions, see our wiki here)
  
  2-Memtest. (You can learn more about running memtest here)

  Former pilot who need update

  dne64x.sys (Cisco VPN driver since 2008)

  If you continue to plant I remove Symantec and using MSE instead

  Symantec is a common cause of BSOD.

  
  
  I remove and replace it with Microsoft Security if you are using Windows 7 and if you win 8 or higher, use the built-in Defender.
  
  http://us.Norton.com/support/kb/web_view.jsp?wv_type=public_web&docURL=20080710133834EN
  http://www.Microsoft.com/security_essentials/

  Use it to Norton 360 http://Symantec.pcperformancetools.com/Norton-360-how-to-uninstall.html 

• The computer was restarted after a bugcheck. The bugcheck was: 0x000000d1 (0 x 0000000000000002, 0 x 0000000000000001, 0 x 0000000000000018, 0xfffff88005254d16)

  Hello Microsoft,

  Nice day!

  Laptop to our head of service stops automatically. I checked with the other posts, some are the same, but can't find the bug error we encounter. Please check the below error code

  The computer was restarted after a bugcheck. The bugcheck was: 0x000000d1 (0 x 0000000000000002, 0 x 0000000000000001, 0 x 0000000000000018, 0xfffff88005254d16). A dump was saved in the: C:\Windows\MEMORY. DMP. Report ID: 23025-071714-01.

  Event ID: 1001

  The dump file is shared on SkyDrive. The URL is

  https://onedrive.live.com/redir?RESID=A21E1CFD1B8F0B96%211092

  Thank you very much!

  Kind regards

  Sidney Mendoza

  Hi Sidney,

  The attached file of the DMP is to bug checking DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1) .

  This indicates that a kernel-mode driver attempted to access pageable memory with a high IRQL.

  A driver tried to access a pageable (or that is completely invalid) address while the IRQL was too high. This bug check is usually caused by drivers who used a wrong address.

  BugCheck D1, {18, 2, 1, fffff88005254d16}

  Argument 1 is 0000000000000018 indicating completely invalid memory was referenced. We don't even need check, we can tell just by looking at her that he isn't a valid address in any way.

  3: kd > k
  Call child-SP RetAddr site
  fffff880'031fd608 fffff800'034 d 7169 nt! KeBugCheckEx
  fffff880 '031fd610 fffff800' 034d5de0 nt! KiBugCheckDispatch + 0 x 69
  fffff880'031fd750 fffff880'05254 d 16 nt! KiPageFault + 0 x 260
  fffff880'031fd8e0 fffff880'05257722 athrx + 0x18d16
  fffff880 '031fd930 fffff880' 05256cac of the athrx + 0x1b722
  fffff880 '031fd9c0 fffff880' 052ddb8b of the athrx + 0x1acac
  fffff880 '031fda00 fffff880' 052e4d61 of the athrx + 0xa1b8b
  fffff880 '031fda30 fffff880' 052634 to 7 the athrx + 0xa8d61
  fffff880 '031fda90 fffff880' 0523d9fa of the athrx + 0x274a7
  fffff880 '031fdac0 fffff880' 016ae9b6 of the athrx + 0x19fa
  fffff880 '031fdb00 fffff800' 034e230c ndis! ndisInterruptDpc + 0x1b6
  fffff880 '031fdb90 fffff800' 034cf8ca nt! KiRetireDpcList + 0x1bc
  fffff880'031fdc40 00000000 00000000' nt! KiIdleLoop + 0x5a

  We can see the pilot who attempted to access invalid memory was athrx.sys , which is the Atheros network card driver.

  3: kd > .trap fffff880'031fd750
  NOTE: The frame trap does contain not all registers.
  Some registry values can be set to zero or incorrect.
  rbx Rax = 0000000000000000 = 0000000000000000 rcx = fffffa8006a01030
  RDX = fffffa8006be3440 rsi = 0000000000000000 rdi = 0000000000000000
  RIP = fffff88005254d16 rsp = fffff880031fd8e0 rbp = 0000000000000000
  R8 = 0000000000013601 r9 = 0000000000000000 r10 = fffff80003462000
  R11 = 0000000000000000 r12 = 0000000000000000 r13 = 0000000000000000
  R14 = 0000000000000000 r15 = 0000000000000000
  iopl = 0 nv up ei ng nz na po nc
  athrx + 0x18d16:
  fffff880'd 05254 16 c7401800000000 mov dword ptr [rax + 18 h], 0'00000018 ds:00000000 is?

  We can see on the statement, we do not have, we didn't move a pointer in the rax register. Rax sucks because of all the x 64 non volatile registers are regarded as garbage, as well as their context is not registered in the hotpath kernel.

  ----------------------------

  1. make sure that all the network drivers (especially Atheros) are up-to-date.

  2 remove and reinstall McAfee with Microsoft Security Essentials for purposes of troubleshooting temporary, as it may very well cause conflicts NETBIOS:

  Removal of McAfee- http://service.McAfee.com/FAQDocument.aspx?ID=TS101331

  MSE- http://Windows.Microsoft.com/en-us/Windows/Security-Essentials-download 

  Kind regards

  Patrick

• The computer was restarted after a bugcheck. The bugcheck was: 0x000000f4 (0 x 00000003, 0x8ba289b8, 0x8ba28b24, 0x82c63df0).

  Original title: windows 7 starts more than 18 minutes take it please help

  It's a copy of errors

  Log name: System

  Source: Microsoft-Windows-WER-SystemErrorReporting

  Date: 03/10/2012 09:19:24

  Event ID: 1001

  Task category: no

  Level: error

  Keywords: Classic

  User: n/a

  Computer: iqraa

  Description:

  The computer was restarted after a bugcheck.  The bugcheck was: 0x000000f4 (0 x 00000003, 0x8ba289b8, 0x8ba28b24, 0x82c63df0). A dump was saved in the: C:\Windows\MEMORY. DMP. Report ID: 100312-800425-01.

  The event XML:

   

     

      1001

      0

      2

      0

      0

      0 x 80000000000000

     

      5848

     

     

      System

      IQRAA

     

   

   

      0x000000F4 (0 x 00000003, 0x8ba289b8, 0x8ba28b24, 0x82c63df0)

      C:\Windows\MEMORY. DMP

      100312-800425-01

   
  Hello
   
  Did you of recent changes to the computer before the show?
   
  Bug Check 0xF4: CRITICAL_OBJECT_TERMINATION: This indicates that a process or thread crucial to system operation has unexpectedly is released or ended.
   

  Refer to this link: http://msdn.microsoft.com/en-us/library/ff560372%28VS.85%29.aspx

  Question: Several processes and threads are necessary to the functioning of the system. As they are completed for some reason, the system can no longer function.

  In order to solve the problem in a better way, one must look the discharges with the debugging tools for Windows.

  Please, start Windows Explorer and navigate to the C:\Windows\Minidump folder. Then, copy the files to your desktop, zip dmp dmp all in one zip archive and download the zipfile to your SkyDrive folder [1] public and post a link here.

  If you do not see the dmp files, make sure that your Windows is correctly configured to generate shocks.

  See this link for more information.

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  http://support.Microsoft.com/kb/254649

  I would recommend also refer to this article for more information and troubleshooting on blue screen errors.

  Resolve stop (blue screen) errors in Windows 7:   http://windows.microsoft.com/en-US/windows7/Resolving-stop-blue-screen-errors-in-Windows-7

• The computer was restarted after a bugcheck. The bugcheck was: 0 x 00000116

  Hello

  I recently got a new PC, initially, I installed the Windows 10 and it worked quite well apart from crashing just by playing a game. Thought that accidents were due to Windows 10 I uninstalled Windows 7 from my old office and installed on the new desktop.

  Same problem with Windows 7, if I play Tera Online at some point which seems to be random, the system hangs, I get a black screen and press the power button for four seconds for the computer to shut down properly because it is not responding to something else.

  Interesting to note that other games (like Batman Arkham Knight) will work perfectly.

  The error that appears in the Windows Event Viewer is:

  The computer was restarted after a bugcheck.  The bugcheck was: 0 x 00000116 (0xfffff880060f9128, 0xffffffffc000009a, 0xfffffa800710f4e0, 0 x 0000000000000004). A dump was saved in the: C:\Windows\MEMORY. DMP. Report ID: 071415-8174-01.

  Download link for the dump

  Thank you for the help, I used the Debugging Tools for Windows to read my memory dump that led me to believe the error is caused by nvlddmkm.sys which seems to be among the NVIDIA drivers. This track seems to me the solution because I need to underclock my graphics card. This seems to have solved the problem, so I'll try to find a solution in other ways that the Microsoft Community as sounds more like a problem of material or at least a NVIDIA issue.

• The computer was restarted after a bugcheck. The bugcheck was: 0x0000003b (0xfffff880113022ec, 0xfffff88008266950, 0x00000000c0000005, 0 x 0000000000000000).

  The beginning of this month, I have built me a new platform game and installed Win 7 HP. everything worked very well at 18. I was just browsing the internet, and all of a sudden my computer froze for a second, then went to the BSOD. Inside, I saw that it was a "memory dump". He did 3 times the same day where I just internet browsing. Upset A, looked autour online and I've seen where people have said that it could be caused due to the update software. So I updated what he needed and then with my day. Well, it happened earlier this morning. I decided to look in my event viewer and see if I could find what is the problem. I found a mistake:

  The computer was restarted after a bugcheck.  The bugcheck was: 0x0000003b (0xfffff880113022ec, 0xfffff88008266950, 0x00000000c0000005, 0 x 0000000000000000). A dump was saved in the: C:\Windows\MEMORY. DMP. Report ID: 072414-16614-01.

  So I decided to call Microsoft and their solution to the problem was "reinstall Windows! Reinstall Windows! "WHAT! REINSTALL WINDOWS! It will take me 2 DAYS to get my computer to the way I want it with all my programs, movies, music. I know that there is another solution to this problem. I want to know the cause of the BSOD. So I was reading around and I've seen where people would say upload the file to dump memory to Skydrive and someone will look into it to find a problem. Well, I downloaded the .dmp file to my Onedrive and I hope and pray someone can read and help. (https://onedrive.live.com/redir?resid=E4B0911EE97A02C1 107 & authkey =!) AAR8h7CfZxBp7aw & ithint = the file % 2cdmp) I initially thought it was a problem of RAM because he said that it was a picture of 'memory '.

  Help, please.

  Thank you!

  Original title: Blue Screen of Death on the new computer. Help, please

  Update of these older drivers may help.

  Update Corsair Link the software to version 2.6.5214 Installer
  http://www.Corsair.com/en-us/support/downloads

  BELKIN F7D4101 Play Wireless USB Adapter firmware update

  http://www.Belkin.com/us/support-article?articleNum=4726