Similar Questions

• WRT610N does not connect using PPPoE

  Hi, I have a WRT610N I plugged my modem Navini and it entered my user name and password as usual.  The router connects to the internet using PPPoE.  I went back to my previous router which is a WRT300N and that works fine without problem.  I've upgraded to the WRT610N due to the additional features it has and I am very disappointed that I can not connected.   I also upgraded to the new cabinet, but it solved the problem.  Can someone help me solve this problem.  Any advice on this matter would be appreciated.  Thank you...

  The Internet is light on the router? You can change the cable connecting the Modem to the router then it reboot? Go to the router configuration page and do it on PPPoE then choose keep alive time redial at 20 and save it. Return to the situation and see if you get this error. If you have already updated its firmware, its possible that this is a hardware problem. Replaced this if its still under warranty.

• WRT610N does not appear as a computer

  I'm trying to map to disk storage USB on the router.

  Operating system is Vista 64

  WRT610N appears under Network Infrastructure, but not as "computer." Search for "WRT610N" as stated in the manual can't find router. Any ideas?

  As you have tired the steps that I mentioned in my Post. Then try a 2nd setp IE. you have a Windows Vista 64-bit OS installed on your computer...

  You need to click on start - run - and in the execution of the field type (\\192.168.1.1) if 192.168.1.1 if the IP address of your router and click OK and it invites you to enter the user name and password, you must enter the username and password you created on your router to the storage drive. (By default the username and password is "admin" "admin") and click Ok. This allows you to view the folder in which you created on your storage space, you need to right-click on it and select "Map network drive" and click on finish, it will map the drive on your computer. Once done, you will be able to access the storage drive.

• Router WRT610N does not appear in my network places.

  
  
  

• WRT610N v1 - Wi - Fi and Wireless does not. Fried?

  Howdy... I think that my router is fried.  Unable to access this router wireless.  Wireless name appears on my PC (an office, 1 HP laptop HP) 2, but none connects.  Wired connection does not work also, but I can't connect to the internet if connected directly to the cable modem.

  Do I have to reset everything (page of the router, etc.) ... or it is fried.

  If it was just question wireless, I'd understand reset of the router.  But its also the wired connections does not, so that's why I think its something more sinister.

  Thank you

  OK - I think I found the solution to the intermittent wireless connection.  Changed the channel on the 2.4 GHz from 6 to 11, and I did have a problem with the WiFi since (typing wireless now).

  Thanks to Saber-toothed for help on this global problem.

• WRT610N - FTP works does not correctly

  Hello

  I installed the latest firmware, b 02, 10. It's a total mess with FTP, it does not work correctly:

  -I can't share the whole disc and see the files with windows Explorer

  -J 'have a lot of files in a folder of 2' 500 and 1000 only appear in windows Explorer!

  -by transfer ftp, router hangs up

  ...

  I use windows XP, FileZilla Client and the latest version of each driver or program. I tried to format the drive (NTFS btw), restart the router, restore the default settings (with the web admin button). ...

  It seems I have to wait a few months to use the router as advertised! It's a scandal!

  OK, finally I got it back working again:

  -format the HD and giving him a short name ("external")

  -Reset by webUI

  -flash

  -new reset by webUI

  -new configures the router

  I managed to share the same directory ftp and external drive, which is the directory root named "external".

  As expected, the speed is still poor, and some bugs are still new: in a dir I have 2000 + files in the windows Explorer that they are not all shown (about 1000).

  This router is my biggest disappoinement in the material ever.

• HTTPS access to the router does not work with Firefox 33.0

  HTTPS access to the router Linksys wrt610n has worked so that Firefox 32.0.3 the dd - wrt software of this router is self-signed certificate with the public key RSA = 512 bits (Yes, it's too short today). From Firefox 33.0 and whose 34, 35, 36-access https does not work. It is desirable to restore https behavior as in Firefox 32.0.3 (with warning and ability to do security exception). Please see the attachment with a https query result in different versions of Firefox.
  Thank you.

  Hello, make suggestions to the https://support.mozilla.org/en-US/questions/1038487 help in your case?

• Logitech Vid does not connect

  WRT610N Version 1 Firmware 1.00.03 B15. Vista x 64. Webcam Logitech Orbit AF running Logitech Vid link tanks that when I remove the router of the network. When I reconnect the router, the connection fails. Vid needs ports 9000-9005 for UDP traffic. I therefore set up simple Port Forwarding for 9000. No change. I have configured the Port Range Forwarding ports 9000-9005. No change. I set up QoS for ports 9000-9005. No change. I have reset the router and restore the configuration. No change. Logitech Vid still does not connect. I looked in the Forums about this, but there is no discussion on this one. Please notify. Thank you!

  Thank you! It's the best way to start, and I executed everything before I started this thread. The following did finally work, but the explanation needs confirmation. After some research, I went to the Administration: advanced features: SIP ALG: and check the radio button for people with disabilities. I read that SIP of Linksys functions can cause checksum errors in SIP packets. Which can be seen in Wireshark, but checksum errors are visible after the action above, hence the need for another test. Among all the upgrade and coordinate reboot and restart it, by clicking the off button is the only action that makes the difference. I also removed the following experimental port configurations I tried earlier: configure ports 9000-9005 in Applications and games. That's what I see right now.

  Thanks again!

• iPhone 7 more buttons outside does not

  I've had my iPhone 7 + for about 2 weeks now. Every once in awhile all buttons outside to stop, volume up/down, power, home. The home button will still record and push and give the sensation of taptic and touchID works. The phone itself still works and I can answer texts and which do not use notifications.

  The couple spent time he did, he came upon her in about 4-5 minutes, however it was about half an hour and still nothing. I want to restart my phone, but the switch does not work.

  Has anyone seen this issue or know how to fix?

  Thanks in advance.

  I just experienced the same problem on my iPhone 7, I think it's a bug in iOS, but I am using iOS 10.0.2. Power + button low Volume allowed me to turn it off then turn it back on... Apple please fix this bug!

• App store, Safari and iTunes does not connect to the Internet after installing macOS Sierra

  App store, Safari and iTunes does not connect to the Internet after installing macOS Sierra

  After upgrade 'OS X El Capitan' to "macOS Sierra" window only empty "App store" and page "Safari" made its appearance, no error message shows. store "iTunes" and "Dictionary" does not connect too.

  But Google chrome works well.

  So have you tried the next steps in your original post that Safari does not work after installing macOS Sierra:

  (1) x OS: "Unable to connect" or "unable to connect to the App Store. An internet connection is required"- Apple Support

  2) Advanced the steps to correct the problems with the iTunes Store - Apple Support connection

• Safari does not work after installing macOS Sierra

  Safari and apple store does not work after installing macOS Sierra

  Alas, my crystal ball is in the shop for cleaning, so you will need to provide more details on what "doesn't work" and above all error messages. First of all, let's start the App Store. Provide as much information as possible for those of us who do not sit on your shoulder.

• My iPad Apple 3rd generation wifi + his cell phone does not work

  MY 3rd generation Apple iPad, wifi + cell

  model number MD408LL/a

  Serial number DM * VGL

  THE SOUND DOES NOT WORK

  < personal information under the direction of the host >

  All sounds, or simply notification and sounds apps (for example do music and videos app still have sound)? If notifications and apps you have notifications on mute: on the iPad side switch - Apple Support ? If the sounds in all applications which have tried for example soft-reset/reboot of the iPad, insert/remove the headphones?

• After recent, iPhone, 6, update, Windows, Explorer, does not work, see, iPhone

  I installed the latest update required for my iphone ios 6 a few days ago, and now when I try to download pictures from my iphone to my PC (via USB connection), the PC does not see the iphone.   iTunes sees it yet, but windows Explorer does not work.  It seems that some setting has been broken through the update of ios.  A way to solve this problem?

  Restart the computer and the iPhone. Unlock the iPhone before connecting it to the computer. Any change?

  TT2

• iPhone 7 more telephoto camera does not

  Is anyone having problems with iPhone 7 more telephoto does not activate. I'll go to the camera application and press the 2 x zoom feature, but it appears to be not to activate the camera of 56mm at the front. I cover the lens with my finger, the camera on the right side and the iPhone always displays an image despite me concealing one of the cameras teo. I can't activate the second camera. It seems to only be zooming digitally. I'll do this outside and he'll only digitally zoom when I hide the second lens.

  Im having this same problem. I heard from someone that he could not work until the next software update... but I have no idea and have not found anything in the online help. If someone else gets to know how.

• Contact ID battery fast draining iPhone 5s does not

  5s fast drainage and Touch ID sinice 10.0.2 iOS iPhone battery update does not

  Restarted the iPhone since the update yet?

  1. Press and hold the sleep/wake button until the Red slider appears.
  2. Drag the slider to turn off your device completely off.
  3. Once the device turns off, press and hold the sleep/wake button again until you see the Apple logo.