Logitech Vid does not connect

WRT610N Version 1 Firmware 1.00.03 B15. Vista x 64. Webcam Logitech Orbit AF running Logitech Vid link tanks that when I remove the router of the network. When I reconnect the router, the connection fails. Vid needs ports 9000-9005 for UDP traffic. I therefore set up simple Port Forwarding for 9000. No change. I have configured the Port Range Forwarding ports 9000-9005. No change. I set up QoS for ports 9000-9005. No change. I have reset the router and restore the configuration. No change. Logitech Vid still does not connect. I looked in the Forums about this, but there is no discussion on this one. Please notify. Thank you!

Thank you! It's the best way to start, and I executed everything before I started this thread. The following did finally work, but the explanation needs confirmation. After some research, I went to the Administration: advanced features: SIP ALG: and check the radio button for people with disabilities. I read that SIP of Linksys functions can cause checksum errors in SIP packets. Which can be seen in Wireshark, but checksum errors are visible after the action above, hence the need for another test. Among all the upgrade and coordinate reboot and restart it, by clicking the off button is the only action that makes the difference. I also removed the following experimental port configurations I tried earlier: configure ports 9000-9005 in Applications and games. That's what I see right now.

Thanks again!

Tags: Linksys Routers

Similar Questions

  • Webcam from Logitech (2) does not not - impossible to install the software

    I tried two webcams from Logitech.  #1 webcam installed OK, but the sound did not work.  The video worked fine.  I went to properties, downloaded drivers, went the whole 9 yards, no noise.

    Try to work with Webcam #2 (Quick Chat) and get this message when I run the software: this program is blocked due to compatibility issues.  Found the drivers and downloaded.  Yet once the vid does not have the audio type argument.  Realtek HD audio installed in Device Manager.

    According to the box, Quickcam Chat is compatible with Windows Live Messenger.  Not one of these webcams does not work and I wonder why?

    If none of the Logitech webcams works with Windows?

    Operating system: Win7 64 bit

    Webcam model # V - UAP42

    * Frustrating *.

    If anyone knows WHAT the webcam works with Win7?

    Talk to Logitech support and it seems none of these work with Win7 64 bit.  Does anyone have recommendations for webcams that work with Win7?

    Hello

    Thank you for joining Microsoft Community where you will find all the necessary information on Microsoft products!

    You can't seem to get its model V-UAP42 number using Quickcam Chat camera.

    I imagine the frustration you feel when you are unable to get sound using a device.

    The problem may occur if the driver is not compatible.

    On the Logitech site, it seems that different software are available by Quickcam Chat camera.

    See the site:

    http://Logitech-en-AMR.custhelp.com/app/answers/detail/A_ID/3428/section/Troubleshoot/CRID/405/lt_product_id/281/tabs/1, 3,2,4, 5/cl/we, fr

    I suggest you to install the driver for LWS 1.1 x 64 with Vid on the site mentioned above.

    If the problem persists, try to install the drivers in compatibility mode.

    See the site:

    Make older programs in this version of Windows

    http://Windows.Microsoft.com/en-in/Windows7/make-older-programs-run-in-this-version-of-Windows

    I hope this helps. If the problem persists, or if you have problems of Windows in the future, let us know and we would be happy to help you.

  • Peripheral USB does not connect to the guest operating system

    Hello

    I installed VMware Server 2.0 on windows server 2K 3 Enterprise. I also installed a new guest OS win 2 k 3 standard.

    My question: during the attempt of USB connection in the comments, it does not connect. It shows the error like: "an error occurred while trying an operation connecting an USB device between the host and the guest. Please check the Device Manager of Windows for the current state of the USB devices attached to the host. "in the events.

    but the usb device works fine in the host operating system win 2 company 3 k. the log shows that:

    16:23:58.671 Jan 08: vmx | USB: Device connection 0 x 400000409306545

    16:24:43.578 Jan 08: vmx | VMXVmdbLoadUsbDevices: New series of 0 USB devices

    16:25:03.421 Jan 08: vmx | USBG: CONNREQ: corresponding request head after 123675 ms for the name: Toshiba\ DataTraveler\ 2.0 vid:0930 pid:6545 path: 1/4/4 speed: high family: storage

    16:25:03.421 Jan 08: vmx | Msg_Hint: msg.usb.win32.connectionError (sent)

    16:25:03.421 Jan 08: vmx | An error occurred while trying an operation connecting an USB device between the host and the guest. Please check the Device Manager of Windows for the current state of the USB devices attached to the host.--


    explored in the vmware communities but in vain.

    Roline

    See the entries related to USB in my computer FAQ - link is in my signature

    ___________________________________

    VMX-settings- Workstation FAQ -[MOA-liveCD | http://sanbarrow.com/moa241.html]- VM-infirmary

  • App store, Safari and iTunes does not connect to the Internet after installing macOS Sierra

    App store, Safari and iTunes does not connect to the Internet after installing macOS Sierra

    After upgrade 'OS X El Capitan' to "macOS Sierra" window only empty "App store" and page "Safari" made its appearance, no error message shows. store "iTunes" and "Dictionary" does not connect too.

    But Google chrome works well.

    So have you tried the next steps in your original post that Safari does not work after installing macOS Sierra:

    (1) x OS: "Unable to connect" or "unable to connect to the App Store. An internet connection is required"- Apple Support

    2) Advanced the steps to correct the problems with the iTunes Store - Apple Support connection

  • Messages does not connect to the Yahoo IM account?

    Messages app v9.2, currently works very well with my Google account and iMessage, also worked with my Yahoo Messenger account, but recently (today?) does not connect to it.

    I know that Yahoo has made changes to their Instant Messaging System. This change affected only Messages?

    Hello

    I can't connect either (I didn't realize that I do not use)

    However going on the Yahoo Site and change the password does nothing.

    With the help of their option 'insecure Apps' does nothing no more (there was an email saying I was using access to messaging through an unsafe application - but I have not used their messaging service for a very long time.)

    It does say read more suggests, is not Mail (after OS X 10.9 is OK)

    He does not on access to their e-mail service.

    There is no option in Messages to try to activate disable SSL you can with AIM or Jabber accounts

    I have looked in the help (a little) but still found nothing.

    20:49 Tuesday. October 4, 2016

     iMac 2.5 Ghz i5 2011 (El Capitan)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro (Snow Leopard 10.6.8) 2 GB
     Mac OS X (10.6.8).
     iPhone and iPad (2)

  • iPhone 5 sec Bluetooth does not connect

    My 5s Bluetooth iphone works fine one day, the next day it does not connect to my Boise, helmet or Fitbit.   My Bluetooth is on, I have it enabled or disabled and you have rebooted my phone.  I have updated to IOS 10.0.2.

    I was able to pair with my ipad.

    Hello

    Try the procedure described in this article to support > get help to connect a Bluetooth device accessory with your iPhone, iPad or iPod touch - Apple Support

  • Bluetooth does not connect on iOS 10 and sierra OS

    I just bought an iphone 7, Apple Watch 2 and I updated my computer to sierra yesterday.

    I wanted to do the auto unlock with my watch, but my phone does not connect to the Mac with bluetooth. He wants to connect and the phone is displayed in the bluetooth settings, it says on my phone to pair if the numbers are the same, and then he "fails to connect. so im lost and I can't use my watch.

    I have reset my watch (by unpairing), iphone (by resetting all settings) and rebooted my computer.

    It seems that the "it just works era" is over for apple.

    If misery loves company, I'm here!  Just posted my new iphone 7 + setting BLUETOOTH is not 'discover' one of my devices (in 2015 Lexus and Bose radio/speakers).  In addition my iPad and iPad air are also not 'discover' devices!  I think that this happened once I installed the latest ios 10.0.2 software on all my devices.  Please reply if you receive some 'advice' from someone in the "know"!  Thank you!

  • I just got a new modem (Arris SB6190) and now my Airport Extreme does not connect.  It worked fine with the previous modem (a rented one TWC).  Help!

    I just got a new modem (Arris SB6190) and now my Airport Extreme does not connect.  It worked fine with the previous modem (a rented one TWC).  Help!

    Always recommended to reset the airport back to settings by default and then set up again whenever you have a new modem or change your Internet Service provider.

    Turn off the new modem for at least 30 minutes. More is better.

    Perform a hard reset on the AirPort Extreme, then it turned off.

    Make sure that the Ethernet cable connects the modem to the "O" on the AirPort Extreme WAN port

    After the power of the modem 30 minutes down, turn on the modem and let it run for at least 5 minutes by itself.

    Then, turn on the airport and let it run a few minutes

    Set up AirPort Extreme again

    Important note... There are many reports of problems with the modem Arris SB and airports. Both are great products, but they do seem to work perfectly together for some users.

  • Thunderbird does not connect with the server

    Another recent problem is Thunderbird does not connect with the server. I don't know if sent mail will go out, but I know I'm nothing receive. My internet connection works well for FF or another browser. I checked my settings and they seem OK. I checked the default settings in Win10x64 and they are correct. Any ideas?

    Although windows 10 is new for us all. How do solve you. I have other solution with very similar issues.

  • IMAP e-mail accounts does not connect

    Just recently my iCloud, Gmail and Outlook IMAP accounts does not connect through the app Apple Mail on my MacBook Pro running 10.11.6. I get a popup error message and exclamation points appear next to each account that States the unable to connect to the server application. IPhone & iPad with the same accounts are fine, just my Macbook Pro has this problem. Connection Internet is fine. Suggestions?

    Please read If you cannot send or receive e-mails on your Mac - Apple Support.

  • Does not connect with the e-mail server after update.

    Thunderbird ran an auto update yesterday. Then it just stopped working. It does not connect with the Comcast email server. An error message appears "Unable to connect" and "the connection was refused when attempting to contact live.mozilla.messaging.com. I don't want to uninstall and reinstall for fear of losing my emails and address book. How can we get Thunderbird set, there is no tool in the toolbar to enable the debugging and correction of program errors.

    I use Thunderbird version 38.1.0.

    Thank you.

    The problem solved itself, Thunderbird has just started working. I followed the thread suggested by Christ1 and found none of it applied. No malware, no browser, no certificate error security block. I did, however, in Thunderbird, under Tools/Options/General uncheck the button for "When Thunderbird launches, show the Start Page in the message box." I do know that if this helped, Thunderbird still do not access Comcast mail for hours after that, even with several stops and restarts.

    Until the next problem...

  • My UK 6s iPhone does not connect to the network in Germany?

    My UK 6s iPhone does not connect to the network in Germany?

    'The network '? Which network? WiFi or cell phone? And what have you already tried to get connected?

  • After that put 36.0.1 to date, does not connect to internet

    After update, don't be loading not pages. Does not connect to Comcast. Computer restarted from scratch, reset modem and router - nothing works. I tried Safe Mode early, did not work. Internet Explorer works fine. Mail works fine.

    There is no error message when the update has been loaded.

    It is a terrible 'update '! How can I fix it?

    IQ140 said

    After update, don't be loading not pages. Does not connect to Comcast. Computer restarted from scratch, reset modem and router - nothing works. I tried Safe Mode early, did not work. Internet Explorer works fine. Mail works fine.

    There is no error message when the update has been loaded.

    It is a terrible 'update '! How can I fix it?

    Update: I indeed found firewall was the issue (the first time with updates of Firefox). I tried uninstalling and reinstalling, but that no longer works.
    Then I opened the application window of Norton Security (looking for information of firewall). I don't actually change or click on what to Norton. I decided to try to install again. This time, when I hit "Run" instead of "Save", the small window Norton popped up saying downloading is safe. Then he installed and opens very well.

    It may be a quirk of Norton? Or by choosing run rather than save (and running after registration)?

  • Hello my iPhone 6plus does not connect to the network on the upper left side of the screen it ust say research

    Hello my iphone 6plus does not connect with the network on the upper left side of the screen it say research

    Have you ever tried troubleshooting mentioned in this article?

    If you cannot connect to a cellular network or cellular data - Apple Support

  • Yahoo mail does not connect to the server on one of my accounts

    Yahoo mail does not connect to internet

    Hello Curt,.

    Thank you for asking your question here in Apple Support communities. Seems that Yahoo does not connect on your iPhone 6s. I understand not email how important is for everything these days. I will try to suggest a few things you can do to test one we hope to get this up and ongoing run as you expect.

    The first thing we want to make sure is that all your data is safe. You can perform a backup to iCloud or iTunes. Use this article to help with this: backing up your iPhone, iPad, and iPod touch.

    Once your data is safe, try under Troubleshooting in this Apple support article: get help with Mail on iPhone, iPad and iPod touch.

    If you have any question, you may want to try this reset: If your iPhone, iPad or iPod touch connects to a Wi-Fi network. Use the section titled still not 'connect?' and follow the steps to reset the network settings. This brings the network settings to factory default. Then, you can try your email.

    If your Yahoo email account is an IMAP account, you can check the settings here: Apple Mail search parameters, then you can delete the account and set up again. This article should help you with that. Follow the steps described in the article, but remove account, then you can add the account of the rest of the instructions. Set up an e-mail account on your iPad, iPhone or iPod touch.

    Thanks again and have a great day.

Maybe you are looking for

  • How can I synchronize tasks on my local machine with google?

    Is it possible and if so the synchronization of tasks I create in Thunderbird Lightning on my local pc, with tasks online on google?

  • Tecra R840 stop energy eco-mode

    I use a Toshiba R840 with Windows 7 64 bit. Recently, I am facing a problem with the laptop stops down while it is on the eco power mode. Suddenly the FAN will begin to run at maximum speed and the mouse cursor gets stuck after computer power laptop

  • SuperDrive for MacBook Pro 13 inch

    I need to replace the drive in my MBP, since then, I'd like to get something more current, what should I look for in a player that fit and work?

  • URLStream BB10 memory leak

    I use this code to download large files from server. It works very well on PlayBook OS (I can upload a few files of concerts), but when I use it in the same application on BB10, it crashes after about 300 MB download. I noticed that it crashes becaus

  • 32-bit operating system and 64-bit

    Hello Can someone explain the difference between the 32-bit operating system and 64-bit? I am running with 32-bit win7 butHow about 64 - bit? Does it mean that 64-bit is more advanced? Thanks in advance.;-) Klyde