WRT610N does not connect using PPPoE

Similar Questions

• tnsping kcp5 is ok, but does not connect using netservicename

  Dear Sir.

  We tried the trial version 10.0.5

  On the computer of Client 32 bit (XP and Windows 7) this PL Sql Developer works very well if we connect to 32-bit Oracle or Oracle Server 64 - Bit Server.

  We tried this on Windows Server 2008 64-bit (Machine formatted fees)-> installed Oracle 11 g 64-bit Standard Edition Version-> it works very well for the database on the server, as well as through client machine using netservice.

  Now, we have installed PL SQL worm 10 on Server 2008 (64-bit)-> customer request 32-bit install-> we installed 32 bit Oracle 11 g-> (full) Client created by using the new net service 32 Bit Client-> Net (kcp5) configuration utility-> we are able to

  tnsping kcp5 to the server physically level but also at the level of the customer in the machine.

  But when we connect with system/manager@kcp5-> it does not work at the level of the client as well the machine Server

  This installation of oracle 11g 32 Bit 64 Bit 2008 Server client has created this problem which worked very well.

  We have no "need to install 32-bit Oracle client 11g Oracle in Windows 2008 (64-bit server), but since it was held by Pl SQL Developer-> this, installed us.

  Please advise as what to do now.

  Kindly find attached three jpg files as below: -.

  (a) Test_Server_Services.jpg-> various Services running at the level of the Windows Server 2008 (64-bit)

  (b) kcp5 tnsping Test_Client1.jpg (netservice Testing which is OK at the level of the server, as well as at the customer level)

  (c) Test_client2.jpg connection system/manager@kcp5 that gives

  The error ORA - 12514 TNS Listener does not currently of service requested in connect descriptor

  Concerning

  Suresh BB

  ORA-12514 ALWAYS only occurs due to a problem on the Server DB system.

  One of the causes of this problem are when the Oracle database is broken & needs to be started.

  A remote client send a request to the listener by asking to be connected to a specific service.

  If/when the listener knows nothing about this service, the receiver responds with ORA-12514

  view the results from the OS controls following two:

  lsnrctl status

  lsnrctl service

  Because each request to connect to the listener gets connected, listener.log file will contain a line with 12514 as status code.

  * This line contains valuable debugging information. So after this line & surrounding lines.*

  for additional debugging suggestions read the URL below:

  http://edstevensdba.WordPress.com/2011/03/19/ora-12514/

• vSphere client using the name Netbios on ESXi host does not connect using the credentials of a Windows session

  I have 3 ESXi 5.5 hosts, all connected to a single server vCenter, where we try to authenticate directly to the host by using the windows logon credentials. I have installation of the Administrators group of ESX and filled with the admin accounts that I want to be able to authenticate to the host. The Netbios name of the domain is tstdomain (for example) where the domain name is tstdomain.com. If I connect directly to a host and check the checkbox 'Use Windows Session Credentials', the vSphere client will default by using the Netbios name of tstdomain\adminusername and the connection will fail indicating that the username and/or password is incorrect. If I enter the domain name of tstdomain.com\adminusername, I am able to connect to the host without error.

  Does anyone know how get past that this matter have the vSphere client uses the domain name or to use the Netbios name and connect with the credentials to active directory? I looked by editing the file/etc/hosts and checked that the SPN of the host is correct in active directory with the command hostname setspn - l, with no luck on one. I also tried to change the field of research for the Netbios name of tstdomain rather than the tstdomain.com domain name, also did not work.

  Thanks in advance for your suggestions on how to correct the problem.

  Seems that this issue was due to a slow network and the connection timeout when you try to talk to the domain controller. I am able to connect with windows creds now, but the connection is very slow. I increased the default period of 30 to 60 seconds to help work around the problem.

• Speco DVR8TL250 does not connect using Windows 7.

  I have a Speco DVR8TL250 that I can access it remotely using Windows XP and Windows Vista computers. I'm unable to access the recorder using Windows 7.

  Any help would be greatly appreciated.

  Hi dbad_dgood,

  Welcome to the Microsoft Answers Forum!

  ·         Please provide us with the exact error message or the error code that you receive when you try to connect the 8TL250 DVR?

  ·         The device is getting detected in Device Manager?

  To check if the device is detected in Device Manager, do the following:

  i. click on start, type devmgmt.msc and then on enter.

  II. research the name of the device

  According to my research, the device is not compatible with Windows 7. You can check out the link below and check if the device is compatible with the version of the operating system installed on your computer: http://www.microsoft.com/windows/compatibility/windows-7/en-us/default.aspx

  You try to install the drivers in compatibility mode. Steps to follow:

  i. right click on the driver

  II. click Properties

  III. click on the Compatibility tab

  IV. Select run this program in compatibility mode and select windows vista

  Link for reference below: make older programs run in this version of Windows

  If the problem persists, you should contact the manufacturer of the driver, because there is no upgrade or patch for Windows 7.

  Thank you, and in what concerns:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Treo 750 WM5 Internet Explorer does not connect using ActiveSync cross

  
  

  Very late update:

  Whenever I have improved my Treo 750 to WM6, I found in the PROGRAMS "Proxy Manager", which is nothing else that a box to select 'Force AT & T proxy'.

  Whenever I have an ActiveSync connection via Bluetooth with my laptop connected to the internet, I simply non - select the "Force AT & T Proxy" and any use of the program (IE, Google Maps, email send & receive, etc.) the ActiveSynce Passthough.

  Message is about: Treo 750 (Cingular)

• iPod touch will not connect using bluetooth

  New iPod Touch model MKJ02LL/A does not connect using Bluetooth

  Try to connect again redfish Bluetooth music receiver model RF-BTR315

  and

  Radio in Toyota Camry

  Sometimes (after restarting the iPod of parts and the music receiver) the music receiver will appear but then not pair.

  It never connects to the Camry.

  Redfish and Toyota says that they are compatible with your iPod model and its iOS?

  Ry, you can:

  -Reset the device iOS. Nothing will be lost

  Device iOS Reset: Hold down the On / Off button and the Home button at the same time for to

  ten seconds, until the Apple logo appears.

  -Reset the car system and the device of redfish

  . - Reset network settings: settings > general > reset > reset network settings

  -Restore from backup. See:

  iOS: how to save

  Restore your device from an iCloud or iTunes backup - Apple Support

  -Restore factory settings/new iOS device.

• Why my hotspot does not connect to my iPhone6? I just used it on right Friday night before I downloaded the 9.2 IOS... Anyone having problems?

  Why my personal hotspot does not connect to my iPhone6? I just used it on right Friday night before I downloaded the IOS 9.2 update... Anyone else having problems?

  http://www.application.Update/9.0.2

• I use MSN Explorer to my email. It does not connect and I get error code ox80072eff

  I use MSN Explorer to my email.  It does not connect and I get error code ox80072eff.  What can I do to fix this?

  Hi JoshKimbell,

  Please see the next Windows Live Forums thread:

  http://windowslivehelp.com/thread.aspx?ThreadId=c51f5e01-f5c4-4ec5-B470-8b0058f5f980

  If you continue to have problems, please repost your question on the following link:

  http://windowslivehelp.com/forums.aspx?ProductID=1

  Thank you!

• I have a new router and the computer windows 7 If using WAP wireless encriptación. I also want to use my old laptop which has XP then does not connect.

  I have a new router and the computer windows 7 If using WAP wireless encriptación. I also want to use my old laptop which has XP then does not connect. I was told by the router (Belkin) manufacturer support there is a MS download XP patch so it will connect to my new wireless network. Where can I get it and what it is labeled?

  original title: wap encriptación

  Hello

  Maybe this can help.

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=3914

• My laptop has not been used for a year and now does not connect to wireless internet?

  My wife's cell phone has recently been repaired (power Cable plug damage) and has been missing for a year. We both used my laptop which connects to the internet just fine. The laptop connects to the network but does not connect to the internet. I tried all suggestions that our Windows Diagnostics, as well as other ideas for myself but had no chance. The continuous diagnostic message to read "cannot communicate with primary DNS 194.168.4.100 server. My only thought is that perhaps because of the amount of time it has been used as the network driver can be updated, although I don't know how to upgrade without connecting to the net?

  Hello

  Follow the suggestions and then check:

  Method 1.

  Let us reset TCP/IP and check.
  To reset TCP/IP stack to go to this article and follow the instructions.
  http://support.Microsoft.com/kb/299357
  
  Method 2.
  Step 1.
  1 connect to your router (by typing 192.168.0.1 or 192.168.1.1 in the address bar) and connect. Check your user manual or documentation if you don't know the references of logon.
  2. make sure that you are in Setup-> basic configuration category.
  3. scroll down until you see "DHCP Server" - if it is disabled, select 'enable '.
  4 enable DHCP if you want, you can change the number that starts the DHCP IP setting. (This is optional)
  5. use the DNS servers provided by your ISP. There are many DNS servers out there. It is preferable to use your ISP if possible.
  6. scroll and click 'Save Settings'.

  Step 2.
  1. click on start and then Control Panel.
  2. go to network and sharing Center and then click on change adapter settings.
  3. right click on the connection to the Local network and select Properties.
  4. Select Internet Protocol Version 6, and then click Properties.
  5. select Obtain DNS server automatically an address and press Ok.
  6. choose obtain an IP address automatically.
  7. repeat the steps for Internet Protocol version 4 as well.

  See also:

  Network adapter problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems Using event logs Windows Network Diagnostics to troubleshoot network http://windows.microsoft.com/en-US/windows-vista/Using-Windows-Network-Diagnostics-event-logs-to-solve-network-problems

  Network connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• Laptop does not connect to the internet, office. Both use the same router. Tried troubleshooting, does not. Help!

  I have a desktop computer and a laptop. Both use the same router. The laptop does not connect to the network, but the office has no problem. My wireless adapter on the laptop is on, I tried troubleshooting. I tried to turn it off for 30 seconds then restart him. But nothing is resolved the problem. Any ideas would be helpful! Thank you

  Hello

  Maybe this can help.

  These steps and tell us where is the breaking point.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  Make sure that if there is Wireless Utility a utility vendor is not running with the native Windows wireless utility.

  ----------------

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible set up the firewall correctly, otherwise totally uninstall and get rid of its remaining processes that permit the own local network traffic flow.

  If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  ---------------------------

  Stack TCP/IP work should look like.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.

  The physical address is MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.

  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  ---------------------------------------------------

  A message in the small window that says connected wireless doesn't means that you are really a valid functional connection.

  Above everything is OK, you must be able to connect to the router.

  Connection to the router means that you can enter the IP of the router base in an address bar in one go, being able to connect and configure the router menus see.

  If it doesn't connect to the router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security.

  Enable security wireless after you eat to make a functional connection.

  
  

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• HP EliteBook 8440p does not connect to the external monitor using VGA! Help!

  As you can read by the title, this computer does not connect to an external monitor using VGA.

  It will be not just to record all monitors in the control panel.

  Can I change the resolution, change the color, etc.. But it will pick up any display.

  -This computer has a HDMI port.

  -The Windows key and pressing P make the ring of little blue loading appear for a microsecond before nothing appears.

  -VGA cable is brand new, double male, directly connected to my Panasonic Viera 32 ''.

  -In the properties of this computer is giving an error code that this computer has no drivers. (Code 28)

  After a repair, he says "device Base system has not a pilot.

  Can someone direct me to the corresponding pages for drivers or instructions? Any help would be appreciated.

  There is probably a combination of keys specific to your model that enables / disables the VGA port on and outside.  Look in high ranking a key with a marking saucy that some how is supposed to look like a monitor.

• Application does not connect to the server using WAP2.0

  Hello

  I used following code to get the suffix of the url that is required to connect to the application server using WAP2.0

         if(CoverageInfo.isCoverageSufficient(CoverageInfo.COVERAGE_DIRECT))
          {
                  //WAP 2.0
              String uid = null;
              ServiceBook sb = ServiceBook.getSB();
              ServiceRecord[] records = sb.findRecordsByCid("WPTCP");
              for (int i = 0; i < records.length; i++) {
                  if (records[i].isValid() && !records[i].isDisabled()) {
                      if (records[i].getUid() != null &&
                          records[i].getUid().length() != 0) {
                          if ((records[i].getCid().toLowerCase().indexOf("wptcp") != -1) &&
                              (records[i].getUid().toLowerCase().indexOf("wifi") == -1) &&
                              (records[i].getUid().toLowerCase().indexOf("mms") == -1)   ) {
                              uid = records[i].getUid();
                              break;
                          }
                      }
                  }
              }
  
              if(uid!=null)
              {
                  if(AppConfigurations.DEBUG)
                      System.out.println("Connected using direct WAP2.0....");
                  return ";ConnectionUID="+uid;
              }
          }
  

  I am same ConnectionUID as present in this complete book in Options in the device.

  Even application does not connect to the server using WAP2.0.

  Let me know what other things should I check to make application to connect to the server using WAP2.0.

  My phone is BB 8900 and OS 4.6.1

  WAP connection will pass through the gateway of the carrier.  This gateway can oppose your respect, or might be trying to optimize the data, or can display a login page for you.  Try the same URL that you use in your program, directly with the WAP browser on the device and see if that runs through effectively.

• I had to use restore on itunes on my ipod and now it shows on my list of computer peripherals, but does not connect with itunes.

  I had to use restore on itunes on my ipod and now it shows on my list of computer peripherals, but does not connect with itunes.

  Original title: ipod

  You may be better to ask on the Apple Support Forum - https://discussions.apple.com/thread/1577894?start=0&tstart=0 (example)

  See also - http://support.apple.com/kb/TS1363

  It will be useful.

• Dreamweaver (on Windows 7) does not connect to the server, IIS (v7) using "FTP over SSL/TLS...". »

  I am weather evauating to buy Dreamweaver CS6...

  Trial of Dreamweaver CS6 (on Windows 7) does not connect to the IIS server (v7) using "FTP over SSL/TLS (explicit encryption).  I have a NEW Godaddy SSL certificate installed on the IIS server.

  On the connection between States Dreamweaver: "server certificate expired or contains invalid data."

  I tried:

  -ALL Dreamweaver Server configuration options

  -L' use of multiple certificates (I tried 2048 and 4096-bit Godaddy SSL certificates)

  -Make sure the certificate "issued to the"domain name is my domain name. "

  I am able to connect without a problem with Filezilla, Filezilla equivalent affecting 'explicitly require FTP over TLS.  I can connect both using Microsoft Expression web.

  This has been discussed previously. I recommend reading my old thread for details:

  http://forums.Adobe.com/thread/889530

  But to make a long story short, Godaddy is incorrectly signed SSL certificates on shared servers.  The servers/ips/domains and the certificate do not match.  So DW and many other tools fail authenticate with Godaddy SSL connections.  Some users have stated that other tools FTP, such as Filezilla as you mentioned, bypass and automatically change your connection to insecurity, but DW is very picky.  Once you modify encryption against zero, the connection will be accepted.  Best solution is if you want a certificate SSL correctly signed move to another host because Godaddy refuses to admit that they are wrong with SSL certificates on their sites.  These warnings will appear also to your users if you have a store saying the SSL certificate does not match the domain/ip and this can make users checking in a very nervous showcase.