WRT610N Wireless will restart whenever I connect a Sirius SL100
Hi all
I just bought a 610N to replace my old 54G. I updated the firmware and January and set up the band of 2.4 GHz with WPA-TKIP and set to B/G only. Whenever I tell my Sirius SL100 to connect to internet for dissemination, the wireless radio on the router all comes down for a minute or two. It wasn't a problem, that I got with my 54G. I tried this with the burst in and out parameter.
Is there a setting I can change to make it work? I don't know how all things Sirius radio may cause the router to reboot. I used wireless with my Wii, Macbook Pro and PC without problem.
Thanks for any help,
-BigBot
Thank you understand suggestions. After I have reset the router; I noticed that Sirius has been working with 2.4 GHz unencrypted. When I changed to WPA-TKIP, it stopped working. So I tried to change to WPA2-AES (parameter caused my 54G to freeze every 40 minutes), and all devices are working properly (alothough the router is slower). Is there something non-standard with the implementation of WPA-TKIP?
Thanks for your help,
-BB
Tags: Linksys Routers
Similar Questions
-
blue screen / memory_management/Restart - whenever I connect the external hard drive
whenever I plug in the external that I get a screen blue with the message of management of the memory/500 GB, Ive done scan memory which was ok, booted in safe mode it still did. I did the sfc/scannow and message were found corrupted files that he couldn't fix it, tried to disable the antivirus then plug externally and he always has. It's windows 8 on a touchscreen ASUS all-in-one, is only 6 months and after 3 weeks, I was stuck with the constant blue screen at startup until it my tech had to wipe and reinstall windows and that day he said it was an update that he didn't like. When I plug a 32 GB key it works fine, but with external it restarts every time and on startup it sends a report to microsoft, so why microsoft will not send me a fix... Help
whenever I plug in the external that I get a screen blue with the message of management of the memory/500 GB, Ive done scan memory which was ok, booted in safe mode it still did. I did the sfc/scannow and message were found corrupted files that he couldn't fix it, tried to disable the antivirus then plug externally and he always has. It's windows 8 on a touchscreen ASUS all-in-one, is only 6 months and after 3 weeks, I was stuck with the constant blue screen at startup until it my tech had to wipe and reinstall windows and that day he said it was an update that he didn't like. When I plug a 32 GB key it works fine, but with external it restarts every time and on startup it sends a report to microsoft, so why microsoft will not send me a fix... Help
Thanx got fixed, had a boyfriend of work come and he found the answer on page 3, it was the USB driver had to be removed and reinstalled with the right pair on the ASUS website
-
How can I configure my Internet XP connection so that it will automatically connect to my WiFi (wireless) without asking me the password whenever I connect?
original title: automatic Wifi connectionHello
By default, Windows XP attempts to connect to networks without wires in the following order:
- Available networks that are in the list of network preferred (by order of registration)
- Preferred networks in the list proposed (by order of registration)
- Other networks according to selected advanced settings
Check out these articles and check if that helps:
To connect to an available wireless network
To set up automatic wireless network configuration
5 steps: how to set up your network wireless home
http://www.Microsoft.com/athome/organization/wirelesssetup.aspx
-
Mr President, whenever I connect to internet on my laptop using idea NET setter dongle it says the bad pool caller and will restart and reboot... Here is the link to dupmp files https://onedrive.live.com/redir?resid=97d7886e9c3f12c6 mini! 104 & authkey =! AEE9bFVyH3uOKNg & ithint = % 2czip
Hello
Bugcheck 1000007E, {ffffffffc0000005, fffff8028a66f060, fffff8801b01b5c8, fffff8801b01ae00}
WARNING: Unable to verify timestamp for ewusbwwan.sys
ERROR: Module load completed but symbols can be loaded for ewusbwwan.sys
Probably caused by: ewusbwwan.sys (ewusbwwan + 2bb5)ewusbwwan.sys dated 31/05/2011 driver Huawei Technologies Co.. Your USB dongle driver
or a device attached to it.BugCheck C2, {b, fffff8029f4f8380, 0, fffff8029f4f8b90}
WARNING: Unable to verify timestamp for c:\windows\system32\drivers\ewusbnet.sys
ERROR: Module load completed but symbols can be loaded for c:\windows\system32\drivers\ewusbnet.sys
Probably caused by: c:\windows\system32\drivers\ewusbnet.sys (ewusbnet + 2353)c:\windows\system32\drivers\ewusbnet.sys Ditto pilot.
This driver update.
Resolution of the blue screen in Windows 8/8.1 errors
http://Windows.Microsoft.com/en-CA/Windows-8/resolve-Windows-blue-screen-errorsCheck with HP Support, their drivers and documentation online and ask in their forums
on known problems. Updated BIOS, drivers of low level chipset and on-board major
and drivers of separate devices (see methods of updating driver below).BiosVersion = F.03
BiosReleaseDate = 07/09/2012
SystemManufacturer = Hewlett-Packard
SystemProductName = PC HP Pavilion Sleekbook 14
Family = 103C_5335KV G = N L = CON B = HP S = PAV X = Null
SystemVersion = 087F1000003B5900000310100
SystemSKU = C0P30PA #ACJ
BaseBoardManufacturer = Hewlett-Packard
BaseBoardProduct = 18F9
BaseBoardVersion = 82,12HP support/troubleshooting & drivers
http://welcome.HP.com/country/us/en/support.htmlContact HP
http://welcome.HP.com/country/us/en/contact_us.htmlHP forums
http://h30434.www3.HP.com/PSG/-----------------------------------------------------------------------------------------------------
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded: run DriverView - set the VIEW to hide
Microsoft drivers - update those without drain in their names. (Also update BIOS and)
low level chipset drivers.)-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now click on
Driver update (this can do nothing as MS is far behind the certification of drivers) - then right
Click on - uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmWindows 8/8.1 - hardware and drivers
http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-8Windows 8/8.1 - Why Windows is not find my device?
http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-deviceWindows 8/8.1 - what happens if a device is not installed correctly
http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly----------------------------------------------------------------------------------------
Tests of memory intercept all errors such as memory do not match (possible even for sticks
seemingly identical) and when the faster memory is placed in system behind the slower memory.
So it is best to Exchange also sticks in and out to check for those, even if all the tests of memory do not
show a problem.To test the RAM here control - run 4 + hours or so.<-- best="">-->
www.memtest.orgFor the Windows Memory Diagnostic tool.
WinKEY + W - type in the search-> memory box - find the top Memory Diagnostics tool
list - and follow the prompts.How to run the tool in Windows 7 Memory Diagnostics (and 8/8.1) - in Windows 8 8.1
the name is "Windows Memory Diagnostic".
http://www.SevenForums.com/tutorials/715-memory-diagnostics-tool.html======================================================
After doing ALL the updates you can and if the problem persists, run DriverVerifier.
(Remember to use the methods Windows 8 posted at the top of the first answer above).Driver Verifier can help find some BSOD problems:
Using Driver Verifier to identify issues with Windows drivers for users advanced
http://support.Microsoft.com/kb/244617How to solve the problems of driver in Windows Vista or 7.
http://www.WinVistaClub.com/T79.htmlUsing Driver Verifier
http://msdn.Microsoft.com/en-us/library/ff554113 (v = VS. 85) .aspxHow to use Windows drivers check Manager to solve problems and identify the Driver questions
http://www.YouTube.com/watch?v=_VwIDD9xngMDriver Verifier
http://www.techsupportforum.com/2110308-POST3.htmlUsing Driver Verifier
http://www.faultwire.com/solutions/using_driver_verifier.phpHow to use Windows drivers check Manager to solve problems and identify the Driver questions
http://www.YouTube.com/watch?v=_VwIDD9xngMYou can disable the driver verifier
http://support.Microsoft.com/kb/244617WINDOWS key + X - RUN - type-> auditor/reset press ENTER to disable
BlueScreenView lets you know if there is a driver specified in the error message. Also check with
MyEventViewer at the blue screen.If DriverVerifier creates a minidump upload it and post the link here so we can analyze.
I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
hardware device
my wireless network is displayed with a cross and will not let me connect saying settings for this network do not match the requirements of the networs and it is a hidden network how to make it visible again :(Hello
What operating system installed on the computer?
Note: Look for errors in the network card device manager.
Method 1: Follow the article mentioned below, if you are using Windows 7 operating system.
Using the troubleshooter from network in Windows 7
http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7
Method 2:
He looks at the IP address and other parameters are not set correctly, I suggest you contact your Internet service provider or provider router wireless to help on this.
For more information, follow the below mentioned article:
Set up a wireless router:
http://Windows.Microsoft.com/en-us/Windows7/set-up-a-wireless-router
Follow the below mentioned articles and see if they help you:
Set up a wireless network:
http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network
Wi - Fi and in Windows network connection issues:
Wireless network card: frequently asked questions:
http://Windows.Microsoft.com/en-us/Windows7/wireless-networking-frequently-asked-questions
-
Panel Display control for CM1415fnw says that it will not allow for wireless (WiFi) network card while connected to the wired Ethernet cable. Was able to get the printer to activate the network WiFi once the Ethernet cable has been disconnected. and there he has disabled the connection once again Ethernet has been reconnected.
How this printer can be configured to allow both wireless and wired print 802.11?
Thank you.
Hi CM1415fnw_help,
You can't the connected printer Ethernet & Wireless at the same time. The only option is to connect the printer USB & Ethernet or USB & wireless. It is not possible to have two networks connected at the same time. Let me know if you need help.
-
Original title: I have Windows Vista home basic. Whenever I try to connect to the internet I get the error "Windows has encountered a critical problem and will restart automatically in a minute. Please save your work now' and the computer restarts
This started happening a few days ago. I tried to run the software anti-virus and 3 different registry cleaners and nothing helped. I use a mobile internet USB and when I tried to run safe mode with networking of the device was not recognized.
Does anyone have an idea on how I can fix this?
This is the Win32/Trojan.Shutdowner virus and rootkit causes this error. I think that it is the solution: download and burn the ISO image of kav rescue ofhttp://rescuedisk.kaspersky-labs.com/rescuedisk/updatable/kav_rescue_10.isoon CD. Make a start of full system scan from the disc that you created. Remove infections all found, including this stupid annoying rootkit, and you're done! At least it worked for me!
-
Creative cloud tells me I am disconnected and will not let me connect. I tried quiting and restarting the program. I tried to configure the automatic detection of the local network settings. I also tried to delete the opm.db. Still does not work.
Hello
You can refer to the Thread -: error "You have been disconnected" whenever I try to connect to the creative desktop application cloud
Also try:- cloud creative connection errors
Hope this helps!
-
Firefox has turned very slowly on my Mac (version 10.6.8). Very, very slowly. In addition, whenever I connect I get a "403 forbidden" message for my websites favorite, my email, etc. How can I fix it?
I tried to open Firefox without Add - ons and that did not help at all.
I also uninstalled MacKeeper, but which did not help either.
Hello
I'm glad to hear that your problem has been resolved.
If you have not already the case, please mark this thread as solved by the solution of marking.
This will help other users experience similar problems helps to find faster and more efficiently.I hope that you will continue using our products and we thank you for contacting the Mozilla Support.
-
can not get rid of an address in search by subject line - rises whenever I connect
Whenever I connect to Mozilla to search - a previous address as I did a search on "1234 Broadway" - pop ups and I cannot get rid of it. Very annoying.
Also - every time i do a new search some ad pops up and I have to go back and resend. This is a new thing - it used to just take me straight to what I was search for. Its so annoying I use Yahoo instead.
The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
Note: This will make you lose all the Extensions, open Web sites and preferences.To reset Firefox, perform the following steps:
- Go to Firefox > help > troubleshooting information.
- Click on the button 'Reset Firefox'.
- Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
- Firefox opens with all the default settings applied.
Information can be found in the article Firefox Refresh - reset the settings and Add-ons .
This solve your problems? Please report to us!
-
Help! I NEED to connect my iPhone5s to the stereo, but it has only one usb port and whenever I connect it, it connects? Is there a setting I need to change on my phone? Help, please
You will need something like that and a micro USB to USB cable
http://www.Apple.com/shop/product/MD820AM/A/lightning-to-micro-USB-adapter
-
Whenever I connect my iPad or iPhone to my iMac, I get this message asking me if I want to update. I fell for it once, but once the update has been completed, and it was restarted, I got the prompt again.
I thought that maybe it was something with my phone until I plugged an iPad (brand new) and got the same thing. Both devices are to 9.2.1. The two calls to update.
Any suggestions?
February 2016 - https://discussions.apple.com/thread/7470196 - device wants to update to iOS 9.2.1 but he already has.
and: https://discussions.apple.com/message/29859259#29859259
-
All of a sudden Satellite A200 will restart
Hi all, I have a laptop Toshiba Satellite A200 and I have questions with her re-starting all the time.
I have re-installed windows 7 and each time I do any work, all of a sudden the laptop will restart.The problem would be a bad battery?
It is not easy to say whether this issue has something to do with the battery.
This happens on the battery only, or supply even when the adapter is connected to your laptop? -
Since the installation of El Capitan, my streaming to my Audioengine DAC D2 cut after 12 minutes (the default duration of sleep). It will restart by pressing the space bar. When I change the duration of sleep, the cut outs are becoming more frequent and intermittent. Help?
I checked the wifi and changed frequency (new modem, frequency change made no difference). The Board battery seems fine - all updates well. My computer is an iMac (2011), 3.1 GHz Intel Core i5, 8 GB 1333 MHz DDR3, with a new AMD Radeon graphics card. I recently installed a State strong 1 TB SATA drive and fitted with a LaCie Porsche 4 to USB for backup and a 4TB disk storage RAID LaCie drive.
I'm frustrated, having to come in my computer since my living room every 12 minutes to continue to listen to Spotify on my stereo system.
My guess is there a bug in the software of sleep in El Capitan, which disrupts his (I've tried different USB ports connect the Audioengine sender and same thing).
Should I go back to Yosemite?
Turiteaguy
First of all, 10.11.3 OSX just came out. Try this.
-
Original title: Microsoft puts obstacles for users of email accounts
Whenever I connect to a Microsoft account that it requires a security code by sending an e-mail. This different e-mail are not yet accessible on the same PC. This overprotection caused the great disadvantage to us using his accounts. We are unable to access your account to a fine pressing it puts obstacles requiring security codes. We, the owners of the authentic product become more impatient because after payment of money costs a fortune he must face a form of punishment by Microsoft. Under the name of the protection of the accounts, he can't harass us in this way. If our money has been paid without value? This bad trend of Microsoft should soon change. Microsoft itself cannot meet in person the degree of convenience we know trying to connect to their accounts.
You realize that * you * would allow the "two-step verification", you're talking about, huh? ;-)
If you don't like it, turn it off.
http://www.eightforums.com/tutorials/35740-Microsoft-account-two-step-verification-turn-off.html
-It has always been and will always be a compromise between comfort and security, and as more and more of everyday life become digital and floating out there on the hard drives of others - these measures are necessary.This isn't just a question of Microsoft in many ways: you have activated the feature that supposedly you cause disadvantages and may turn off and Microsoft gives you just a way to help protect your identity and your information in response to the current state of reality.
Maybe you are looking for
-
computer, I took the hard drive was an emachine with Windows XP home. I had another computer in a place away from giving old IBM computers with no working or deleted hard drives. I put the hard drive of the computer and now its wanting a product key
-
Vista will not print works wireless but wired through router
I have 2 wireless modem ATT DSL wire connected to a firewall server / print wireless Netgear FM114P ProSafe and a router 3Com to increase the number of connections. I have a Vista laptop that allows to print everything wired through my 3Com router co
-
What is the return policy if I buy the Sony 54 "KDLV4100?
I'm about to go to bed and don't want the chance to have to wait for hours on the phone to see what is the return policy on this TV. I am interested because I think the purchase of tv. I've looked everywhere and could not find anything on the dell si
-
Do not install manually reboot is no necessary
Hello I manually install a library package that contain bitmaps. I am able to download and install the cod file, but when I save the new module, the isResetRequired() method returns false. Then I launch the application, but no image is displayed. The
-
Hello Two questions please. Can someone please shead light on what DSR / DTR is, what about the Bluetooth? In the BluetoothDemo.SSPScreen, there are 3 menu items: "Get DB", "DSR on", "off DSR. What are these for and why I would DSR on or off? During