Vista will not print works wireless but wired through router

Similar Questions

• Computer Vista will not print to Deskjet 930c on home network

  Our three computers (Vista is A, B, and C are XP) are connected to a wired network of private home.  Computer A has a Canon printer that is shared and all 3 computers can print to that very well.  Recently, we re-gasket a printer HP DeskJet 930C to computer B (via USB) and shared.  Computers, B and C can be printed on the HP very well.

  But, even if A computer can see the printer, it will not print.  He seems to accept the print command and sometimes a dialog box flashes on and so quickly as it cannot be read, but nothing prints.

  I worked through the Microsoft article "File and sharing printers in Windows Vista" at http://technet.microsoft.com/en-us/library/bb727037.aspx#mainSection and you don't see anything that solves the problem.  I ran the doctor of printing & scanning HP and who wrote the 930C is installed but not connected.  According to the website of HP, Vista has the correct driver.  I have uninstalled and installed the printer from computer A, but it still does not work.

  So I called HP Support, and they said that I had done all the right things, and "it must be a registry problem.  This seems unlikely to me, and I don't know where to look in the registry.

  Any ideas or solutions?

  Hello

  Windows XP sharing can be done automatically in XP or operating systems, XP does not host the drivers for the newer Vista operating systems and so you will have problems with some models.

  To manually add the shared printer, follow these steps:

  1. install the printer locally in following second method: connecting the cable in parallel below:

  http://support.HP.com/us-en/document/c01655752

  2. go into your PC host (computer B), right click my computer and select Properties.

  Find the name of computer on this screen.

  3. go in Control Panel > printers and faxes.

  Right-click on the printer and select Properties.

  Open the tab end hand note the share name

  Note: I would say keeping the name of sharing as simple as possible (e.g., 930C)

  4. go to your Vista machine and open Control Panel > printers.

  Click with the right button on the 930c configured in step 1 and select Properties.

  Open the Ports tab.

  Click Add a new port.

  In this list, select Local Port.

  Set the local port in the form of \\Computer B Name\Printer share name (for example \\PC-P\930c).

  Confirm the changes and check any change.

  If you have still any question, I would say that the printer is connected to the Vista machine, then share it with the XP PC and check for any changes that should run more easily from my experience.

  Shlomi

• Laptop will not print WORD document but print Excel and e-mail.

  Related topics did NOT address my problem.  My wireless laptop has been networked with my office and my printer and worked fine until about a month.  I suddenly couldn't print anything from my laptop.  My daughter downloaded the drivers updated for me and now I can print emails and spreadsheets Excel very well.  However, my laptop to the printer IS STILL NOT print WORD documents.  Can you help me?

  Hi Linda Faye,

  Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to Microsoft Office, and would be better suited to the office community. Please visit the link below to find a community that will provide the support you want.

  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Hope the above information helps.

  Kind regards.
  Nicolas Mathieu
  Visit ourhttp://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• m127fw: M127fw will not print (USB / wireless)

  Hi all

  First of all, please excuse my English, this is not my main language

  I'm out of ideas... We used to be on Mac and everything worked fine. We changed our computer to a Windows 10 machine and printer no longer print. Here's my situation:

  We use an HP m127fw laser MFP. The drivers have been installed correctly. When you send a print job, the windows print job queue is displayed in the taskbar but is empty. I tried to uninstall the driver, the registry cleaning (deleted all folders/keys in connection with HP products) and all, can not solve my problem. When I launch HP doctor to find the problem, it says no, and print a test through it page!

  Please note that I also restore the printer to factory settings (network and printer)

  Here, let me show you some screenshots:

  -Doc HP could not find any problem and is able to print a test page.

  

  -If I try to print a Windows test page, I get this: (and if I click Yes and let windows search for the problem he returned just tell me there is no problem with the printer...)

  

  -By the State of the HP printer and alert; only, it hangs and does not even print.

  

  -From Microsoft office. no error message, nothing, just the printing job queue to burst in the bar of tasks and empty (please see bottom right on the screen).

  

  Here's a final picture of my printers and devices:

  

  I did all those captures being configuration screen wireless but I get the same problem when I'm plugged in USB...

  Has anyone had the same problem before? Can someone help me?

  Thank you for your time, it's really appreciated.

  Found the solution to the problem. Thanks to user CLETjB - searched for the same question but on different OS and got

  To resolve this problem, you must change the user rights access in your TEMP folder located in X:\Users\YourUserName\AppData\Local\ and set it to allow all users. To do this, simply right-click on the Temp folder, go to the Security tab, select each name of groups or users (authenticated users, system administrators, users), click on edit and put them in Total control (sorry, I'm really not sure of the English term); Apply, restart and PRINT!

  Posting it here in case someone else runs into the same problem.

  Bye!

• My M177fw MFP shows paused and will not print, either wireless or with USB

  I try to print wirelessly with my printer HP MFP M177fw.  It shows "ready to print", but does nothing.  If I delete this print job, it shows "printer paused".

  Hi joanieo,

  By your post, I see that you are unable to print to a USB connection or wireless.
  I can help you with this problem.

  I'd do a power reset to see if that will solve the problem.

  When the printer is still lit, disconnect the power cable from the back of the printer.

  Then, disconnect the power cable from the wall outlet.

  Wait 10 seconds and reconnect the power cable to the wall outlet first, then the back of the printer and turn on again.

  Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector)

  For the USB connection, have the printer connected directly to the computer. (not a hub or a docking station)

  It should not be more then 6 feet. Make sure it is a 2.0 and not a 3.0 cable. Also check the ports on the computer, they are 2.0.

  Try and print a self-test on the printer hardware to see if it is a hardware or software problem.

  Print a Configuration report.

  What is the IP address?

  Try to print from the computer.

  If you're still having problems, then go through the steps described in this document provided, to see if she will help solve this problem.

  "Printer is off-line" Message appears on the computer and the HP printer does not print.

  Printing and scanning doctor could solve the problem automatically.

  Please provide detailed results if you're still having problems.

  What operating system do you use? How to find the Windows Edition and the Version on your computer.

  Let me know the results of printing and scanning doctor. (error messages, printed test page)

  Good day!
  Thank you.

• HP Officejet Pro 8600 Mac pro with 10.8 OS that will not print/scan wireless

  I have the printer configured for wireless network, but it does not print or scan outside while connected via usb.  What I am doing wrong?

  WOW, it was as simple as that.  It worked

• Printer HP Officejet 4620 on Windows Vista will not print

  Hello. It is a replacement printer sent me after the motherboard on my first brought to stop working 2 months. The replacement printer is installed, but it stopped printing. He did print test pages when I first put in place, but when I go to print a standard Microsoft Word 2007 document, I get the flashing box that says: "the printer is ready. Click OK to continue. The flashes of the box, but when I hit okay, nothing happens and the print queue of the printer says "delete." I ran the HP scan and fix, and he reported that everything was going well. The machine still does not print!

  If you can't get the program to uninstall, then it may be a problem with the way that the Windows operating system treats the registry keys.  Is there a Fixit program provided by Microsoft that allows programs that cannot be installed or uninstalled.  Please click the link below and use this utility to help the uninstall process.

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall/

  Let me know if this can help,

  Jason

• Laptop running Win Vista will not print wireless connection

  I have a problem I'm trying to print on a printer of all-in-one HP Photosmart 2575 of my laptop.  The laptop is running Windows Vista and connect to the network using a Linksys WRT54G2 router is using.  The printer is connected by Ethernet cable to my desktop (Windows XP), and it prints fine.  No matter what I do to print via the wireless router, nothing happens except that the print output only goes to print that and sits down.

  I down loaded the software HP2575 of Vista and updates directly from the HP site.

  Six days ago, when I first installed everything on the new laptop, I did a test print very well.

  Computer portable printer is configured to print documents Spool and using the Port "Dot4_001 HP Device.  In addition, it has the value "share this printer."

  I tried a test and connected the laptop to the printer using a USB connection, and that runs just OK.  Wireless internet works fine for web connections.

  So, what have I done wrong

  I finally solved the problem. I don't know why it works this time.

• Photosmart Plus B210a will not print on the Windows XP computer, but works on the Windows 7 computer

  I just got a Photosmart Plus B210a printer. I was able to install it using the wireless for my Dell Dimension 3000 3 GHz computer with Windows XP 32-bit SP3. He will answer analysis, but it will NOT print, it doesn't matter what I do. I have a Netgear wireless router. I tried the Dell connected directly to the router using a USB of Netgear WG111v3 USB adapter and cable. No impression whatever the configuration.

  On the other hand, I was able to make the printer work with an Athlon II X 4 630 with Windows 7 Professional 64 bit AMD machine. Everything works independently to know if the machine is connected directly to the router Netgear or using the above USB adapter.

  How can I make work B210a with my Dell with Windows XP? Is this a problem XP because Windows 7 has worked perfectly, but Windows XP would only scan.

  Subsequently, I deleted all initially loaded B201a software. At the printer detects the network, then reloaded the software from the CD. The printer then worked fine. What a relief. Perhaps the problem I had previously was linked to my trying to use the USB port when the printer originally did not work.

• just installed wireless com-cast, printer works well, but now I can not fax.

  just installed wireless com-cast, printer works well, but now I can not fax. When I do a fax of the SEZ of reading test, "no phone" I tried the direct link 'wall of fax' (or printer) I lose my phone connection?

  Tuesday, October 9, 2012 17:30:39 + 0000, Dimas_888 wrote:

  just installed wireless com-cast, printer works well, but now I can not fax. When I do a fax of the SEZ of reading test, "no phone" I tried the direct link 'wall of fax' (or printer) I lose my phone connection?

  You must connect to the terrestrial telephone line - outlet. But
  You can buy cheaply something that fits into the wall
  taking current and made the two simple output Sockets.

  Ken Blake, Microsoft MVP

• HP 8600; Printer says it is ready for wireless printing, but will not print my documents. It prints all the pages of the test very well. What I am doing wrong?

  Printer says it is ready for wireless printing, but will not print my documents. It prints all the pages of the test very well. What I am doing wrong?

  Contact HP support.
  http://h10025.www1.HP.com/ewfrf/wc/pfinder?cc=us&DLC=en&LC=en&tool=&query=8600#n251

• My hp c4500 Wireless will not print. Troubleshooting says my printer is not communicating with the router.

  MY hp c4500 wireless printer will not print. Troubleshooting says my printer is not communicating with the wireless router. I've checked everything. Unable to find the answer.

  Hello

  As OEM HP is responsible for the good operation of the printer and their drivers. Check with
  HP support, their documentation online and drivers and ask in their forums.

  Good luck, you need to update or reinstall the latest driver.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  =============================================

  The main issue is probably the drivers, but these can help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• 7525 photosmart all-in-one: printer says wireless, but do not print

  We moved our headquarters to a new location in the House. After you reconnect all devices, the printer seems to work (in his view).  Network test results "spent." When I opened a doc and tried to print, it would not, telling me printer was not in the network. Enter new password for ISP provider crossed wireless configuration. Still not printing.

  I uninstalled and reinstalled the printer. Still will not print. I disabled Norton Internet Security where he was blocking the process. I downloaded Team Viewer so that my son could see if he could help me, but couldn't connect to it to use it. I tried to download HPPrint and doctor to Scan, but it will not download. Any ideas?

  Hi there @MI_OHlady.

  Welcome to the forums

  I understand that you have moved your location of printers and it is not printing via wireless network.

  You mentioned that the print and Scan Doctor will not download, and this could be a problem on the computer or with the internet connection. Could try to use another web browser and try to download and run the printing and scanning Dr. again? I would like to know what are the results of the tool.

  Also, try to make copies of the front of the printer and let me know if they work, or if you see errors.

  I hope to hear from you

• My laptop Sony VAIO with Vista will not connect and stay connected to my wireless internet.

  My laptop Sony VAIO with Vista will not connect and stay connected to my wireless internet.  All other laptops in the House are perfectly.  Internet disconnects, says local only, then reconnects constantly making internet hard work.

  Hi Tinkerbellfancolorado,

  1. When is this last work fine?
  2. Do you receive an error message or error codes?
  3. Recent changes on the computer?

  There could be several causes for this problem.

  Try starting with these methods.

  Method 1

  Step 1

  1. Open Network Diagnostics by right-clicking the network icon in the notification area, and then click diagnose and repair.
  2. Make sure that all cables are connected (for example, make sure that your modem is connected to a working jack or cable phone connection, either directly or through a router).
  3. Reset your modem and router. Remove the power cord from the modem or router, wait at least 10 seconds, then plug in the modem and/or router back.

  Step 2

  Another reason may be windows disable your network adapter to save power. Turn off the power saving option in the properties of the network (wired network only cards) card:

  1. Open network connections by clicking the Start button, clicking Control Panel, clicking network and Internet, click network and sharing Center, and then clicking manage network connections.
  2. Right-click on the connection and then click Properties. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  3. On the Networking tab, click Configure.
  4. On the power management tab, clear the allow the computer to turn off this device to save power option, and then click OK.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Method 2

  Temporarily disable the firewall, and check the status.

  NOTE: To re-enable the firewall after check you the status. If you are connected to the Internet or a network during the time that your /firewall antivirus software is disabled, your computer is vulnerable to attacks.

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  Hope that was heloful.

  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think

• HP 7612: I have a 7612 Officejet from HP that worked wireless but now does not work. When I try to

  I have a 7612 Officejet from HP that worked wireless but now does not work.  When I try to open the Network Setup Wizard a message indicating "wireless communication has been disabled. Can someone please?

  Thank you!

  hhmenar

  Hey @hlhmenar,

  Welcome to the Forums of HP Support!

  I understand that you are experiencing some problems with the wireless settings is disabled on your Officejet Wide Format e-all-in-one printer. I can help you with that.

  I'll send you some instructions describing how to do a factory reset on your printer. If you check your Inbox of forum you should see happens shortly.

  Please let me know the results after following the above. If you can run the wireless setup, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.