WRVS4400N with AG300 and VPN connections
I bought a WRVS4400N router hoping to add wireless and VPN capability at a remote office LAN. I want to be able to establish a VPN connection from my PC to the central office to the WRVS4400N to remote desktop, access and administer systems at the remote office. Remote desktop systems is unnecessary access to systems to the central office.
Before you deploy the WRVS4400N to remote desktop, I'm stable and by configuring it to our central office.
Our central office is a router Linksys AG300 and ADSL service for Internet connection. It works well and I don't want to change it.
I have connected the WRVS4400N to our central office LAN and it has an IP address on its WAN port assigned by the DHCP server on the AG300.
What I do not understand how to establish a VPN connection to a system on the Internet at the WRVS4400N on the local network. I have a laptop with the QuickVPN software installed. If I connect my laptop to the AG300 (i.e. the same switch as the WAN port on the WRVS4400N) I can establish a VPN connection to the WRVS4400N but if I connect to my laptop to the Internet (via my ADSL service at home), I am unable to set up the VPN. I don't know how to configure the AG300 so that the VPN from my laptop reaches the WRVS4400N.
I transfer ipsec enabled on the AG300, but this does not seem to run the VPN with the WRVS4400N.
Can someone tell me what I need to do?
Is there some other DSL modem I could use that facilitates the connection? There is another DSL modem (I don't know make/model until I visit the site) used in remote desktop, but I could replace it if I knew that the replacement work.
Update: I got it to work. See https://supportforums.cisco.com/thread/2108785 for the advice that has been most useful.
The essential steps have been before the ports indicated in this article (and UDP 500) to the WRVS4400N and I dropped a bit of the MTU (do not know if this was really necessary). Now I can establish connection QuickVPN, except when the Windows Firewall interferes.
Hello
Thank you for posting. In the AG300, transmit the following ports to the IP address of the WAN WRVS4400N port: 443, 500, 4500, 60443. This allows you to establish a QuickVPN for the WRVS4400N using the WAN IP of the AG300.
Tags: Cisco Support
Similar Questions
-
How to configure NAT for Hyper-V on laptop with wifi, wired and vpn connectivity
Me, as I suspect a lot of people, I have a laptop with WiFi connection, cable connection and VPN connection (Cisco AnyConnect), which
also uses a virtual adapter (activated when active). I searched for some time a way to be able to move to
Hyper-V in VirtualBox. Blocker full for me is the need for a lot of my virtual machines to be able to connect to the
Internet through 'the connection active' in the way that VirtualBox and VMWare Workstation/Player through their NAT feature.
I'm not a networking wait, but after looking around, can't seem to find something that is simple enough for me to configure,
with a minimum of resources, which allows me to connect a Hyper-V virtual network via a simple NAT device adapter
all three potential network connections - most seem to not assume that one connection out of the machine, which of course does not
me what I want.
Three questions:
1. is there a Windows application available that an adapter (like loopback) internal which acts as a real NAT device to one of the surfaces
external access via the active network connections and through the Windows Firewall and any other antivirus, components etc. for
the road to (i.e. behaves like a "normal app" inside Windows for internet access)? It would be the best option, because it would be
"always there" when I run virtual machines
2. display of my lack of knowledge around this feature, don't RRAS (and I know that this is not an option "minimum contact") allow you to
Connect an internal network adapter to several external network adapters?
3. on the Linux/OpenBSD various base/NAT routers, are everything that allow several external adapters and who are
relatively easy to set up (by an independent expert of the network)?
Really, we could do with this feature for Hyper-V on the desktop, but willing to work around him, if there is a way to at least the
use virtual machines, once it is easy to install.
Hello
The question is more suited in the TechNet forums. So I would say you mention the link and send the request in this forum for better support.
http://social.technet.Microsoft.com/forums/en-us/w8itpronetworking/threads
For any information related to Windows, feel free to get back to us. We will be happy to help you.
-
error on the remote desktop and VPN connections
Unable to connect using desktop remote or VPN. remotes can't find the computer at home on the network and the VPN gives me an 800 error code. I used the remote desktop, but it says my work computer isn't on this network and the VPN connection fails. We checked everything using remote assistance, but it becomes too hard and not responses. Help!!!!!!!!!!!!!!!!!!!
Hello
Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public.
Please post your question in the TechNet Windows XP category.
Here is the link:
http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads
I hope this helps.
Thank you, and in what concerns:
Shekhar S - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly. -
HTTPS with Wifi and 3G connections
Hello
I have a code to open a connection https using Connector.open ().
I check for the MDS coverage and, if not true to add deviceside = false to the URL I check for BIS support and add deviceside = false and ConnectionType = mds public, otherwise I check to support DIRECT and add deviceside = true.
It was everything works very well if you use a SIM card with BB internet services activated. Even though it was not a mobile connection but Wifi available it would connect via Wifi (that I found on other forums it seems to manage it's "free").
However, I got a problem when you use an Orange SIM card with no active internet service. Even if there is Wifi available it wouldn't connect. I then added '= wifi interface' and 'deviceside = true' for the URL and it connects via Wifi.
This is my code
if( _mdsSupport ) { name = name.concat( ";deviceside=false" ); } else if( _bisSupport ) { name = name.concat( ";deviceside=false;ConnectionType=mds public" ); } else if (_directSupport) { name = name.concat( ";deviceside=true" ); } else { name = name.concat( ";interface=wifi;deviceside=true" ); } return Connector.open( name, mode, timeouts );
My problem is that when I use a SIM card with no internet service at all or with the 3G, they both return with _directSupport (IE. CoverageInfo.COVERAGE_DIRECT is enough) but then none of them will ever connect if I have the network of mobile telephony, Wifi, or both.
With the SIM card with no internet service I expected to return CoverageInfo.NONE and try and connect via Wifi.
With the SIM with 3G, I expected him to come back with CoverageInfo.DIRECT but it does not connect successfully.
Please can someone help explain this? I tried it on a Curve 8900 and the Torch 9800.
Thanks for any help.
Hi Peter,.
I managed to get all this work on Friday. Thanks for your other thread with information on making connections. Between your phone and the demo app he began finally to all the senses. Still do not know why this is all handled by the API!
I have test to try, and then sign in using BES and BIS, then Wifi, WAP and finally direct TCP, but you're right that I have need information about AFN to define.
Thanks again for your help. Your son has been invaluable.
-
problem with Ezvpn and VPN from Site to Site
Hello
I want to set Ezvpn and VPN Site to another but the problem is that the EasyVpn that would only work at the Site to the Site does not at all
I have set up 1 card for two VPN with different tagged crypto
I had execlude the traffice to NOT be natted to, and when I remove the Ezvpn site to another work well
crypto ISAKMP policy 100
BA aes
md5 hash
preshared authentication
Group 2
!
crypto ISAKMP policy 10000
BA aes 256
preshared authentication
Group 5
key address 123456 crypto isakmp (deleted)ISAKMP crypto client configuration group easyvpn
easyvpn key
domain ezvpn
pool easyvpn
ACL easyvpn
Save-password
Split-dns cme
MAX User 9
netmask 255.255.255.0
!Crypto ipsec transform-set esp - aes 256 esp-sha-hmac vpn
Crypto-map dynamic easyvpn 10
Set transform-set dmvpn
market arriere-route
!
!
address-card crypto easyvpn local Dialer1
card crypto client easyvpn of authentication list easyvpn
card crypto isakmp authorization list easyvpn easyvpn
client configuration address card crypto easyvpn answer
easyvpn 100 card crypto ipsec-isakmp dynamic easyvpn
easyvpn 1000 ipsec-isakmp crypto map
defined by the peers (deleted)
Set transform-set vpn
game site addressinterface Dialer1
the negotiated IP address
IP mtu 1492
NAT outside IP
IP virtual-reassembly
encapsulation ppp
Dialer pool 1
PPP authentication chap callin pap
PPP chap hostname
PPP chap password
PPP pap sent-name to user
easyVPN card cryptoDSL_ACCESSLIST extended IP access list
deny ip 100.0.0.0 0.0.0.255 101.1.1.0 0.0.0.255
deny ip 100.0.0.0 0.0.0.255 70.0.0.0 0.0.0.255
IP 100.0.0.0 allow 0.0.0.255 any
refuse an entire ip
easyvpn extended IP access list
IP 100.0.0.0 allow 0.0.0.255 70.0.0.0 0.0.0.255
IP extended site access list
IP 100.0.0.0 allow 0.0.0.255 101.1.1.0 0.0.0.255Best regards
The sequence number of card crypto for the static mapping crypto (site to site vpn) should be higher (ie: sequence number must be lower) than the ezvpn (map dynamic crypto).
In your case, you must configure as follows:
map easyvpn 10 ipsec-isakmp crypto
defined by the peers (deleted)
Set transform-set vpn
game site addressmap easyvpn 150 - ipsec-isakmp crypto dynamic easyvpn
Hope that solves this problem.
-
WRT160NL connection with n and USB connection problem
Hi guys,.
I have the Linksys WRT160NL router and I have two fundamental problems with that:
1. I have a laptop HP with n on its wireless card connection. (it's an HP probook 4720 s). So I know that this laptop has ability. n I have the most recent driver vor he 3.1.18. The thing is that my Linksys router does not transmit sound wireless n, just g...
What should I do to make it work with n as well?
2. the second issue is that the USB connection is working in a very strange way. I have attached an ADATA with USB 3.0 HDD external, even. He works in 2.0.
I have a lot of WAV files on it and when I stream to my receiver files pay with much intrerupptions, break ups. MP3 work very well.
I don't know what to do to solve this 2 problems... Maybe someone could help me...
Thank you
Try changing some settings on the router wireless.
Connect the computer to the router with the Ethernet cable. Open the router configuration page. Go to the wireless tab and the manual value configuration view. Change the channel to 11 wireless. Make sure that the network is set to mixed. Save the settings.
Go to wireless security sub tab and change the wireless WPA2 with AES security mode. Save the settings.
Click the tab under advanced wireless settings change the tag to 75 interval, RTS threshold and fragmentation to 2304. Save the settings. Now try to connect to the network again.
-
Dell Latitude E6520 2 separate monitors with HDMI and VGA connection.
Hello
Is it possible to connect 2 external monitors to this model and (with the laptop screen) have 3 monitors altogether? Someone set up hardware hes like that before? It works and is ok with this configuration nvidia card?
Or is it only the opportunity to work with 2 monitors a time?
Any help would be great.
Hi all
I want to give back to the community a 100% working way additional conecting 2 moniors (maybe more even with docking station) and have 3 screens working altogether (2 outside and 1 notebooks).
3 things are needed:
-Intel HD graphics driver
-Nvidia driver
-Active Optimus in the bios
(set up in this order: activate optimus, install intel hd, install nvidia)
Make sure that the drivers are properly installed. Download driver intel hd dells site driver nvidia and the nvidia site.
As a result, it is possible to assign 1 monitor to the nvidia graphics card and other intel hd grapgics card 2. Then, it looks like this in config nvidia:
This works 100% :)!
Now, he is trying to connect as much as possible :).
Hope this help anyone!
-
IPP with Ezvpn and VPN Clients
Hello
I have a 5585 ASA running on 8.4. I have it set to accept the ezvpn NEM mode clients and then push the routes through IPP in the OSPF via redistribution on a list sheet road. Now I came with a second condition of the addition of VPN Clients to the same firewall. In the current configuration if I activate customers, they will push the 32 routing updates in the routing table makes a table long enough and I don't want to do that. What I understand of the redistribution of static route is that:
(1) road should be static in the routing of ASA, inserted through IPP table or manually added
(2) my redistribution list will allow all the roads that fall within the specific subnet.
If I have a 192.168.1.0/24 defined in the ACL of redistribution, a route in this 24 will be added to the routing table. Please refer to the sample configuration:
In the example of config is the road added to the list redisttribution/24 network but if you examine the output at the end of the document, a 32 road has been inserted in the router's routing table.
I want to keep Ezvpn with IPP clients and at the same time to have VPN Clients running without IPP. Would appreciate any help in this!
Thank you
Sylvana
Route-synthesis is only possible if for OSPF routers ABR/ASBR. I wasn't talking another ospf process, but on another area ospf.
if I add summary-address for only my client vpn pool (10.10.0.0/16) will my other routes for ezvpn stop being advertised or will they continue to be advertised as before and only VPN Pool would be summarized?
If you select the summary for 10.10.0.0/16 only that the network will be sumarized. Why would another announcement due to the synthesis of 10.10.0.0/16 cease?
-
Compatibility problem - Windows 7 with WS7 and HP Connection Manager 3
Hi all
I hope someone can help me. I have the following configuration:
Laptop HP 8530w
HP un2400 builtin Broadband Modem UMTS
Windows 7 Professional x 64
VMWare Workstation 7
My problem is that the HP Connection Manager 3 for the HP un2400 doesn't work anymore after installing VMWare Workstation 7. I'm unable to connect to a UMTS network because the connection manager think, for vmnet1 and vmnet8 virtual network cards are online an internet connected.
I tried to disable the virtual networks through the VMWare Network Editor. I can't disable the adapter, but when I apply the settings, the GUI is suspended.
I need to uninstall the HP connection manager. After that, I am able to disable the cards.
But ultimately I need for my work, the vmnet1 + 8 adapters on the host and Manager of HP connections.
Does anyone have similar problems?
Thanks for your help
Kind regards
Chris
Well,.
I did some more tests. I changed the startup type of the service USB arbitration for the delayed start.
It works for me. Active delayed start the connection manager load the firmware of WWAN cards before USB arbitration service is embarrassing. The only condition is that the connection manager must be loaded at windows startup.
Kind regards
Sander
-
problem with windows 2003 vpn servers. and xp pro clients vpn using bridge nic
I have installed 2 guests windows 2003 on 2 laptops. both are configured with 1 CC of backend and frontend 1 nat/vpn server that has 2 interfaces, a bridge and one configured for host only.
I configure nat on both servers windows 2003 rras and vpn services and have them connected to my local network. they are able to access internet, ping between them and other computers on the network, as well as the host systems on which they run.
the problem is that I am not able to connect to the vpn servers remotely from inside a guest virtual machine. I wanted to try a vpn site-to site between the guests 2 windows 2003, but the operation failed.
I then tested customer to type of a guest virtual computer pro xp vpn server. It is also a failure.
but I discovered that if I initiate a VPN from any one of the host computer system laptop or another computer on the physical network I am able to connect to the vpn servers I have set up.
I wish I could have these laptops to operate normally and
time to time be able to turn on virtual machines with vpn
servers and test as dfs things and replication active directory as if
they were running 2 separate real-world offices. the two laptops have invited Setup for 192.168.0.0 networks with subnet mask 255.255.255.192. each host that it supposed to be running a 1 subnet for the popular virtual machine with the servers vpn/nat connect together the 2 sites.
laptop computers are running xp pro and vista ultimate as the host systems. I'm only using the windows firewall but also tested with them disabled vpn connections. also launches the service ipsec on laptops to secure internal lan traffic, I have also tested with two guests with disabled ipsec.
is there something I'm missing here with the installation of the vmware bridge network?
Oh I forgot to mention, I test using pptp and ms-chap v2
I managed to do work by unchecking the tcp/ip settings and the microsoft file sharing on the bridged NIC resaeau.
now it works very well but who explain to me why it cannot work when you are using the same network as the host card. they all have two different ip addresses and mac addresses. but something seems to be in conflict
-
Once the VPN connection is established, cannot ping or you connect other IP devices
Try to get a RV016 installed and work so that people can work from home. You will need to charge customers remote both WIN XP and MAC OS X.
Have the configured router and works fine with the VPN Linksys client for WIN XP users. Can connect, ping, mount the shared disks, print to printers to intellectual property, etc.
Can connect to the router fine with two VPN clients third 3 for Mac: VPN Tracker and IPSecuritas. However, once the connection is established, cannot ping the VPN LinkSYS router or any other IP address on the LAN Office. Turn the firewall on or off makes no difference.
Is there documentation anywhere that describes how the LinksysVPN for Windows Client communicates so these can be replicated in 3rd VPN clients from third parties for the Mac in OS X?
The connection with IPSecuritas and VPN Tracker is performed using a shared key and a domain name. It is not a conflict of IP address network between the client and the VPN 192.168.0.0/24 network.
VPN Tracker and IPSecuritas are able to connect to the routers CISCO easy VPN with no poblem.
Any ideas on how to get the RV016 to work for non-Windows users?
We found and fixed the problem, so using VPN Tracker or current IPSecuritas on OS X people have access to the LAN via the RV016 machines. The "remote networks" in the screen BASE in VPN Tracker has been set on the entire subnet: 192.168.0.0/255.255.255.0 the in the RV016 has been set to the IP of 192.168.0.1 to 192.168.0.254 range. Even if the addresses are essentially the same, without specifying the full subnet in the RV016 has allowed the connection to do but prevented the VPN client machine to connect because the RV016 would pass all traffic to the Remote LAN. Change the setting of 'local group' in RV016 settings in the screen "VPN/summary/GroupVPN', 'Local Group Zone' for the subnet 192.168.0.0/24 full solved the problem.
-
How to start the VPN connection when windows is running
Original title: trouble with automatically the VPN connection
Hi, I want to have my VPN connection to start automatically when windows is running.
Simple version:
I tried various different methods, including; Paste the shortcut in the startup folder and adding the task in the Task Scheduler.I have the same problems with both methods. Just the VPN starts automatically... I have to run it manually whenever I turn on the computer or wake up sleep mode.Does anyone know other methods finally a solution for the other two methods?In the version of the depth of the problems:Method of Task Scheduler: I get argument is not valid, it is even after I have successfully created the task and click OK. The task will not work, and also by some strange reason, my VPN password is not get recorded on my connection more. So now, I need to manually start the connection and type in the password. (I click on save the password whenever this does not work, when the task is active...)Shortcut to the startup directory: Simple and easy... It simply doesn't get it. I followed the steps very carefully and I'm 100% sure that I did it the right way...
These links have good information on how to open a VPN connection to the Windows dΘmarrage
http://www.dariancabot.com/2010/11/15/automatically-connect-to-VPN-at-Windows-startup/
http://www.Buchatech.com/2011/04/configure-Windows-to-automatically-connect-to-VPN/
-
Coming out of the IPSec VPN connection behind Pix535 problem: narrowed down for NAT-Associates
Hello world
Previously, I've seen a similar thread and posted my troubles with the outbound VPN connections inside that thread:
https://supportforums.Cisco.com/message/3688980#3688980
I had the great help but unfortunatedly my problem is a little different and connection problem. Here, I summarize once again our configurations:
hostname pix535 8.0 (4)
all PC here use IP private such as 10.1.0.0/16 by dynamic NAT, we cannot initiate an OUTBOUND IPSec VPN (for example QuickVPN) at our offices, but the reverse (inbound) is very well (we have IPsec working long server /PP2P). I did a few tests of new yesterday which showed that if the PC a static NAT (mapped to a real public IP), outgoing connection VPN is fine; If the same PC has no static NAT (he hides behind the dynamic NAT firewall), outgoing VPN is a no-go (same IP to the same PC), so roughly, I have narrowed down our connection problem VPN is related to NAT, here are a few commands for NAT of our PIX:
interface GigabitEthernet0
Description to cable-modem
nameif outside
security-level 0
IP 70.169.X.X 255.255.255.0
OSPF cost 10
!
interface GigabitEthernet1
Description inside 10/16
nameif inside
security-level 100
IP 10.1.1.254 255.255.0.0
OSPF cost 10
!
!
interface Ethernet2
Vlan30 description
nameif dmz2
security-level 50
IP 30.30.30.30 255.255.255.0
OSPF cost 10
!
permit same-security-traffic inter-interface
permit same-security-traffic intra-interface......
Global interface 10 (external)
Global (dmz2) interface 10
NAT (inside) 0-list of access inside_nat0_outbound
NAT (inside) 10 inside8 255.255.255.0
NAT (inside) 10 Vlan10 255.255.255.0
NAT (inside) 10 vlan50 255.255.255.0
NAT (inside) 10 192.168.0.0 255.255.255.0
NAT (inside) 10 192.168.1.0 255.255.255.0
NAT (inside) 10 192.168.10.0 255.255.255.0
NAT (inside) 10 pix-inside 255.255.0.0Crypto isakmp nat-traversal 3600
-------
Results of packet capture are listed here for the same PC for the same traffic to Server VPN brach, the main difference is UDP 4500 (PC with static NAT has good traffic UDP 4500, does not have the same PC with dynamic NAT):
#1: when the PC uses static NAT, it is good of outgoing VPN:
54 packets captured
1: 15:43:51.112054 10.1.1.82.1608 > 76.196.10.57.443: S 1763806634:1763806634 (0) win 64240
2: 15:43:54.143028 10.1.1.82.1608 > 76.196.10.57.443: S 1763806634:1763806634 (0) win 64240
3: 15:44:00.217273 10.1.1.82.1608 > 76.196.10.57.443: S 1763806634:1763806634 (0) win 64240
4: 15:44:01.724938 10.1.1.82.1609 > 76.196.10.57.60443: S 2904546955:2904546955 (0) win 64240
5: 15:44:01.784642 76.196.10.57.60443 > 10.1.1.82.1609: S 2323205974:2323205974 (0) ack 2904546956 win 5808
6: 15:44:01.784886 10.1.1.82.1609 > 76.196.10.57.60443:. ACK 2323205975 win 64240
7: 15:44:01.785527 10.1.1.82.1609 > 76.196.10.57.60443: P 2904546956:2904547080 (124) ack 2323205975 win 64240
8: 15:44:01.856462 76.196.10.57.60443 > 10.1.1.82.1609:. ACK 2904547080 win 5808
9: 15:44:01.899596 76.196.10.57.60443 > 10.1.1.82.1609: P 2323205975:2323206638 (663) ack 2904547080 win 5808
10: 15:44:02.056897 10.1.1.82.1609 > 76.196.10.57.60443:. ACK 2323206638 win 63577
11: 15:44:03.495030 10.1.1.82.1609 > 76.196.10.57.60443: P 2904547080:2904547278 (198) ack 2323206638 win 63577
12: 15:44:03.667095 76.196.10.57.60443 > 10.1.1.82.1609:. ACK 2904547278 win 6432
13: 15:44:03.740592 76.196.10.57.60443 > 10.1.1.82.1609: P 2323206638:2323206697 (59) ack 2904547278 win 6432
14: 15:44:03.741264 10.1.1.82.1609 > 76.196.10.57.60443: P 2904547278:2904547576 (298) ack 2323206697 win 63518
15: 15:44:03.814029 76.196.10.57.60443 > 10.1.1.82.1609:. ACK 2904547576 win 7504
16: 15:44:06.989008 76.196.10.57.60443 > 10.1.1.82.1609: P 2323206697:2323207075 (378) ack 2904547576 win 7504
17: 15:44:06.990228 76.196.10.57.60443 > 10.1.1.82.1609: 2323207075:2323207075 F (0) ack 2904547576 win 7504
18: 15:44:06.990564 10.1.1.82.1609 > 76.196.10.57.60443:. ACK 2323207076 win 63140
19: 15:44:06.990656 10.1.1.82.1609 > 76.196.10.57.60443: P 2904547576:2904547613 (37) ack 2323207076 win 63140
20: 15:44:06.990854 10.1.1.82.1609 > 76.196.10.57.60443: 2904547613:2904547613 F (0) ack 2323207076 win 63140
21: 15:44:07.049359 76.196.10.57.60443 > 10.1.1.82.1609: R 2323207076:2323207076 (0) win 0
22: 15:44:17.055417 10.1.1.82.500 > 76.196.10.57.500: udp 276
23: 15:44:17.137657 76.196.10.57.500 > 10.1.1.82.500: udp 140
24: 15:44:17.161475 10.1.1.82.500 > 76.196.10.57.500: udp 224
25: 15:44:17.309066 76.196.10.57.500 > 10.1.1.82.500: udp 220
26: 15:44:17.478780 10.1.1.82.4500 > 76.196.10.57.4500: udp 80
27: 15:44:17.550356 76.196.10.57.4500 > 10.1.1.82.4500: 64 udp
28: 15:44:17.595214 10.1.1.82.4500 > 76.196.10.57.4500: udp 304
29: 15:44:17.753470 76.196.10.57.4500 > 10.1.1.82.4500: udp 304
30: 15:44:17.763037 10.1.1.82.4500 > 76.196.10.57.4500: udp 68
31: 15:44:17.763540 10.1.1.82.4500 > 76.196.10.57.4500: udp 56
32: 15:44:18.054516 10.1.1.82.4500 > 76.196.10.57.4500: udp 68
33: 15:44:18.124840 76.196.10.57.4500 > 10.1.1.82.4500: udp 68
34: 15:44:21.835390 10.1.1.82.4500 > 76.196.10.57.4500: udp 72
35: 15:44:21.850831 10.1.1.82.4500 > 76.196.10.57.4500: udp 80
36: 15:44:21.901183 76.196.10.57.4500 > 10.1.1.82.4500: udp 72
37: 15:44:22.063747 10.1.1.82.1610 > 76.196.10.57.60443: S 938188365:938188365 (0) win 64240
38: 15:44:22.104746 76.196.10.57.4500 > 10.1.1.82.4500: udp 80
39: 15:44:22.122277 76.196.10.57.60443 > 10.1.1.82.1610: S 1440820945:1440820945 (0) ack 938188366 win 5808
40: 15:44:22.122536 10.1.1.82.1610 > 76.196.10.57.60443:. ACK 1440820946 win 64240
41: 15:44:22.123269 10.1.1.82.1610 > 76.196.10.57.60443: P 938188366:938188490 (124) ack 1440820946 win 64240
42: 15:44:22.187108 76.196.10.57.60443 > 10.1.1.82.1610:. ACK 938188490 win 5808
43: 15:44:22.400675 76.196.10.57.60443 > 10.1.1.82.1610: P 1440820946:1440821609 (663) ack 938188490 win 5808
44: 15:44:22.474600 10.1.1.82.1610 > 76.196.10.57.60443: P 938188490:938188688 (198) ack 1440821609 win 63577
45: 15:44:22.533648 76.196.10.57.60443 > 10.1.1.82.1610:. ACK 938188688 win 6432
46: 15:44:22.742286 76.196.10.57.60443 > 10.1.1.82.1610: P 1440821609:1440821668 (59) ack 938188688 win 6432
47: 15:44:22.742927 10.1.1.82.1610 > 76.196.10.57.60443: P 938188688:938189002 (314) ack 1440821668 win 63518
48: 15:44:22.802570 76.196.10.57.60443 > 10.1.1.82.1610:. ACK 938189002 win 7504
49: 15:44:25.180486 76.196.10.57.60443 > 10.1.1.82.1610: P 1440821668:1440821934 (266) ack 938189002 win 7504
50: 15:44:25.181753 76.196.10.57.60443 > 10.1.1.82.1610: 1440821934:1440821934 F (0) ack 938189002 win 7504
51: 15:44:25.181997 10.1.1.82.1610 > 76.196.10.57.60443:. ACK 1440821935 win 63252
52: 15:44:25.182134 10.1.1.82.1610 > 76.196.10.57.60443: P 938189002:938189039 (37) ack 1440821935 win 63252
53: 15:44:25.182333 10.1.1.82.1610 > 76.196.10.57.60443: 938189039:938189039 F (0) ack 1440821935 win 63252
54: 15:44:25.241869 76.196.10.57.60443 > 10.1.1.82.1610: R 1440821935:1440821935 (0) win 0#2: same PC with Dynamic NAT, VPN connection fails:
70 packets captured
1: 14:08:31.758261 10.1.1.82.1073 > 76.196.10.57.443: S 820187495:820187495 (0) win 64240
2: 14:08:34.876907 10.1.1.82.1073 > 76.196.10.57.443: S 820187495:820187495 (0) win 64240
3: 14:08:40.746055 10.1.1.82.1073 > 76.196.10.57.443: S 820187495:820187495 (0) win 64240
4: 14:08:42.048627 10.1.1.82.1074 > 76.196.10.57.60443: S 3309127022:3309127022 (0) win 64240
5: 14:08:42.120248 76.196.10.57.60443 > 10.1.1.82.1074: S 1715577781:1715577781 (0) ack 3309127023 win 5808
6: 14:08:42.120568 10.1.1.82.1074 > 76.196.10.57.60443:. ACK 1715577782 win 64240
7: 14:08:42.121102 10.1.1.82.1074 > 76.196.10.57.60443: P 3309127023:3309127147 (124) ack 1715577782 win 64240
8: 14:08:42.183553 76.196.10.57.60443 > 10.1.1.82.1074:. ACK 3309127147 win 5808
9: 14:08:42.232867 76.196.10.57.60443 > 10.1.1.82.1074: P 1715577782:1715578445 (663) ack 3309127147 win 5808
10: 14:08:42.405145 10.1.1.82.1074 > 76.196.10.57.60443:. ACK 1715578445 win 63577
11: 14:08:43.791340 10.1.1.82.1074 > 76.196.10.57.60443: P 3309127147:3309127345 (198) ack 1715578445 win 63577
12: 14:08:43.850450 76.196.10.57.60443 > 10.1.1.82.1074:. ACK 3309127345 win 6432
13: 14:08:44.028196 76.196.10.57.60443 > 10.1.1.82.1074: P 1715578445:1715578504 (59) ack 3309127345 win 6432
14: 14:08:44.058544 10.1.1.82.1074 > 76.196.10.57.60443: P 3309127345:3309127643 (298) ack 1715578504 win 63518
15: 14:08:44.116403 76.196.10.57.60443 > 10.1.1.82.1074:. ACK 3309127643 win 7504
16: 14:08:47.384654 76.196.10.57.60443 > 10.1.1.82.1074: P 1715578504:1715578882 (378) ack 3309127643 win 7504
17: 14:08:47.385417 76.196.10.57.60443 > 10.1.1.82.1074: 1715578882:1715578882 F (0) ack 3309127643 win 7504
18: 14:08:47.394068 10.1.1.82.1074 > 76.196.10.57.60443:. ACK 1715578883 win 63140
19: 14:08:47.394922 10.1.1.82.1074 > 76.196.10.57.60443: P 3309127643:3309127680 (37) ack 1715578883 win 63140
20: 14:08:47.395151 10.1.1.82.1074 > 76.196.10.57.60443: 3309127680:3309127680 F (0) ack 1715578883 win 63140
21: 14:08:47.457633 76.196.10.57.60443 > 10.1.1.82.1074: R 1715578883:1715578883 (0) win 0
22: 14:08:57.258073 10.1.1.82.500 > 76.196.10.57.500: udp 276
23: 14:08:57.336255 76.196.10.57.500 > 10.1.1.82.500: udp 40
24: 14:08:58.334211 10.1.1.82.500 > 76.196.10.57.500: udp 276
25: 14:08:58.412850 76.196.10.57.500 > 10.1.1.82.500: udp 40
26: 14:09:00.333311 10.1.1.82.500 > 76.196.10.57.500: udp 276
27: 14:09:00.410730 76.196.10.57.500 > 10.1.1.82.500: udp 40
28: 14:09:02.412561 10.1.1.82.1075 > 76.196.10.57.443: S 968016865:968016865 (0) win 64240
29: 14:09:04.349164 10.1.1.82.500 > 76.196.10.57.500: udp 276
30: 14:09:04.431648 76.196.10.57.500 > 10.1.1.82.500: udp 40
31: 14:09:05.442710 10.1.1.82.1075 > 76.196.10.57.443: S 968016865:968016865 (0) win 64240
32: 14:09:11.380427 10.1.1.82.1075 > 76.196.10.57.443: S 968016865:968016865 (0) win 64240
33: 14:09:12.349926 10.1.1.82.500 > 76.196.10.57.500: udp 276
34: 14:09:12.421502 10.1.1.82.1076 > 76.196.10.57.60443: S 3856215672:3856215672 (0) win 64240
35: 14:09:12.430794 76.196.10.57.500 > 10.1.1.82.500: udp 40
36: 14:09:12.481832 76.196.10.57.60443 > 10.1.1.82.1076: S 248909856:248909856 (0) ack 3856215673 win 5808
37: 14:09:12.527972 10.1.1.82.1076 > 76.196.10.57.60443:. ACK 248909857 win 64240
38: 14:09:12.529238 10.1.1.82.1076 > 76.196.10.57.60443: P 3856215673:3856215797 (124) ack 248909857 win 64240
39: 14:09:12.608275 76.196.10.57.60443 > 10.1.1.82.1076:. ACK 3856215797 win 5808
40: 14:09:12.658581 76.196.10.57.60443 > 10.1.1.82.1076: P 248909857:248910520 (663) ack 3856215797 win 5808
41: 14:09:12.664531 10.1.1.82.1076 > 76.196.10.57.60443: P 3856215797:3856215995 (198) ack 248910520 win 63577
42: 14:09:12.725533 76.196.10.57.60443 > 10.1.1.82.1076:. ACK 3856215995 win 6432
43: 14:09:12.880813 76.196.10.57.60443 > 10.1.1.82.1076: P 248910520:248910579 (59) ack 3856215995 win 6432
44: 14:09:12.892272 10.1.1.82.1076 > 76.196.10.57.60443: P 3856215995:3856216293 (298) ack 248910579 win 63518
45: 14:09:12.953029 76.196.10.57.60443 > 10.1.1.82.1076:. ACK 3856216293 win 7504
46: 14:09:12.955043 76.196.10.57.60443 > 10.1.1.82.1076: 248910579:248910579 F (0) ack 3856216293 win 7504
47: 14:09:12.955242 10.1.1.82.1076 > 76.196.10.57.60443:. ACK 248910580 win 63518
48: 14:09:12.955516 10.1.1.82.1076 > 76.196.10.57.60443: P 3856216293:3856216330 (37) ack 248910580 win 63518
49: 14:09:12.955730 10.1.1.82.1076 > 76.196.10.57.60443: 3856216330:3856216330 F (0) ack 248910580 win 63518
50: 14:09:13.019743 76.196.10.57.60443 > 10.1.1.82.1076: R 248910580:248910580 (0) win 0
51: 14:09:16.068691 10.1.1.82.500 > 76.196.10.57.500: udp 56
52: 14:09:16.227588 10.1.1.82.1077 > 76.196.10.57.60443: S 3657181617:3657181617 (0) win 64240
53: 14:09:16.283783 76.196.10.57.60443 > 10.1.1.82.1077: S 908773751:908773751 (0) ack 3657181618 win 5808
54: 14:09:16.306823 10.1.1.82.1077 > 76.196.10.57.60443:. ACK 908773752 win 64240
55: 14:09:16.307692 10.1.1.82.1077 > 76.196.10.57.60443: P 3657181618:3657181742 (124) ack 908773752 win 64240
56: 14:09:16.370998 76.196.10.57.60443 > 10.1.1.82.1077:. ACK 3657181742 win 5808
57: 14:09:16.411935 76.196.10.57.60443 > 10.1.1.82.1077: P 908773752:908774415 (663) ack 3657181742 win 5808
58: 14:09:16.417870 10.1.1.82.1077 > 76.196.10.57.60443: P 3657181742:3657181940 (198) ack 908774415 win 63577
59: 14:09:16.509388 76.196.10.57.60443 > 10.1.1.82.1077:. ACK 3657181940 win 6432
60: 14:09:16.708413 76.196.10.57.60443 > 10.1.1.82.1077: P 908774415:908774474 (59) ack 3657181940 win 6432
61: 14:09:16.887100 10.1.1.82.1077 > 76.196.10.57.60443: P 3657181940:3657182254 (314) ack 908774474 win 63518
62: 14:09:16.948193 76.196.10.57.60443 > 10.1.1.82.1077:. ACK 3657182254 win 7504
63: 14:09:19.698465 76.196.10.57.60443 > 10.1.1.82.1077: P 908774474:908774740 (266) ack 3657182254 win 7504
64: 14:09:19.699426 76.196.10.57.60443 > 10.1.1.82.1077: 908774740:908774740 F (0) ack 3657182254 win 7504
65: 14:09:20.060162 10.1.1.82.1077 > 76.196.10.57.60443:. ACK 908774741 win 63252
66: 14:09:20.062191 76.196.10.57.60443 > 10.1.1.82.1077: P 908774474:908774740 (266) ack 3657182254 win 7504
67: 14:09:20.063732 10.1.1.82.1077 > 76.196.10.57.60443:. ACK 908774741 win 63252
68: 14:09:20.063900 10.1.1.82.1077 > 76.196.10.57.60443: P 3657182254:3657182291 (37) ack 908774741 win 63252
69: 14:09:20.064098 10.1.1.82.1077 > 76.196.10.57.60443: 3657182291:3657182291 F (0) ack 908774741 win 63252
70: 14:09:20.127694 76.196.10.57.60443 > 10.1.1.82.1077: R 908774741:908774741 (0) win 0
70 packages shownWe had this problem of connection VPN IPsec from the years (I first thought it is restriction access problem, but it does not work or if I disable all access lists, experience of yesterday for the same restriction of the access-list shows longer than PC is not the cause). All suggestions and tips are greatly appreciated.
Sean
Hi Sean, please remove th lines highlighted in your pix and try and let me know, that these lines are not the default configuration of the PIX.
VPN-udp-class of the class-map
corresponds to the list of access vpn-udp-acl
vpn-udp-policy policy-map
VPN-udp-class
inspect the amp-ipsec
type of policy-card inspect dns migrated_dns_map_1
parameters
message-length maximum 768
Policy-map global_policy
class inspection_default
inspect the migrated_dns_map_1 dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the http
inspect the netbios
inspect the rsh
inspect the rtsp
inspect the skinny
inspect sqlnet
inspect sunrpc
inspect the tftp
inspect the sip
inspect xdmcp
inspect the pptp
inspect the amp-ipsec
permit same-security-traffic inter-interface
permit same-security-traffic intra-interface
IP verify reverse path to the outside interface
Thank you
Rizwan James
-
WHS 2011 and by connecting a Win7 without matching username and the name of the user directory
Working with 2011 and by connecting a Win7 computer server said, are there computer autour or difficulty of connection of said work even if the user name and the directory of the user do not match? I think that's the question when connecting computers and I was wondering if there is no work around.
Hello
-Are computers in the domain environment?It is better suited for the IT Pro TechNet public. Please ask your question in the Forum on TechNet Support. You can follow the link to your question:
http://social.Microsoft.com/forums/is/whs2011/threadsHope this information helps. -
Hub and VPN talked about with WRVS4400n installation problems
Background
4 networks currently connected via VPN with 3 routers RV042 and 1 Netgear FVX538
Central office is 192.168.20.0 has 4 tunnels
local groups on each tunnel are 192.168.0.0 / 255.255.0.0
remote groups all numbers are 'real' network IE: 192.168.30.0 / 255.255.255.0
Offices are set up with tunnels one above hub
local groups 'true' network IE number: 192.168.30.0 / 255.255.255.0
Group remotely on all of these branches is 192.168.0.0 / 255.255.0.0
The Netgear and RV042 router "warn" network number 'conflicts' on groups BUT allow to configure tunnels. All networks can ping all networks and life is great...
Enter the problem
2 branches no longer connect as needed wireless and more of the VPN. Bought 2 WRVS4400n router v2 and tried to set up tunnels. Routers are complaining about the groups the remote and being on the same network and the pop - up will not allow the creation of tunnel.
Is their any way to force the WRVS4400n to accept the remote group or am I stuck with their back or creating a full mesh?
Thank you
Kurt
Kurt,
This feature, or the limitation of the WRVS440N, depending on your point of view, cannot be disabled. In an effort to make this feature more "user friendly" for small businesses, the interface allows you to use what he thinks are invalid parameters. For the moment, there is no way to 'wrong' or bypass the verification of the validity of the section local vs remote subnet.
Thank you
Darren
Maybe you are looking for
-
Resets default zoom when you open a new tab
I use Firefox 23 on Ubuntu. It was recently updated. The new behavior is not desired. Here's what's happening. I open a page http://www.foobar.com I have set my level of zoom with ctrl ++ or view > > Zoom > > ZoomI opened a link from this page in a n
-
Cannot start the ms exchange system attendant service
Hi, im having a hard time to troubleshooting why MSExchangeSA does not start... It says "attendant Microsoft Exchange System on Local computer started and then stopped. Some services stop automatically if they have no work to do, for example, the se
-
Wireless Service disabled with error 0x8000FFFF: catastrophic failure
My laptop has developed the following error after deleting files Apple of the system: Wireless disabled failed with error 0x8000FFFF: catastrophic failure. Network card status: media disconnected. HTTP, HTTPS, FTP connectivity: Passive FTP: error 120
-
original title: Vista to Win 7 networking issue. I have a Vista laptop that I am trying to use with a desktop running Windows 7. I try to use the file and printer sharing. I have no problem with internet connections through my U-Verse gateway. I a
-
I am currently using a program called profile (for tax purposes) and am forced to save/send my file in PDF format. I can't save a file in PDF format, although I have Adobe Acrobat installed. When it goes to print screen, it freezes and finally opens