WS-Security and proxy service: failed to add the identity security token

Similar Questions

• % CABLE_MODEM_HWIC-3-CONTROL_PLANE_FAIL: RBCP failure: failed to add the service ACE flow - type Ethernet not supported

  Hi all...

  I think % CABLE_MODEM_HWIC-3-CONTROL_PLANE_FAIL: RBCP failure: failed to add the service ACE flow - type Ethernet not supported

  on my 1841 which is currently set to L2L via internet cable. Anyone seen this before? I can't find anything on Cisco related to this.
  The tunnel rises and I got the same configs using DSL except interfaces are different. Thank you...
  My configs are below:
  crypto ISAKMP policy 10

  BA 3des

  md5 hash

  preshared authentication

  Group 2

  # address a.a.a.a isakmp encryption key

  ISAKMP crypto keepalive 20 periodicals

  !

  life crypto ipsec security association seconds 28800

  !

  Crypto ipsec transform-set esp-3des esp-md5-hmac xform

  Crypto ipsec df - bit clear

  !

  10 VPN ipsec-isakmp crypto map

  the value of a.a.a.a peer

  Set transform-set xform

  PFS group2 Set

  match address CRYPTO_ACL

  !

  interface cable-Modem0/1/0

  no ip address

  Bridge-Group 1

  Bridge-Group 1 covering-disabled people

  !

  interface BVI1

  IP address 98.x.x.x 255.255.255.224

  IP virtual-reassembly

  VPN crypto card

  Hello DialerString,

  I fear that the ACL is not related to the question, so I expect not to see anything in the debug output

  Hope to help

  Giuseppe

• ORA-01994: GRANT failed: failed to add the users to the public password file

  Snoussi,
  
  our applications 11.5.10.2 and db 9.2.0.6 whenever I'm in the process of grant dba privileges to rman user sys, I get the below error
  
  ORA-01994: GRANT failed: failed to add the users to the public password file
  
  I created the password file and I've changed remote_login_passwordfile = NONE for remote_login_passwordfile = EXCLUSIVE lock
  in initSID.ora then I bounced DB but its showing again.
  
  
  SQL > show the distance parameter
  
  VALUE OF TYPE NAME
  ------------------------------------ ----------- ------------------------------
  real chain of remote_archive_enable
  remote_dependencies_mode string TIMESTAMP
  remote_listener chain
  Remote_login_passwordfile string NONE
  REMOTE_OS_AUTHENT boolean FALSE
  remote_os_roles boolean FALSE
  SQL >
  
  Here is my information in initSID.ora file.
  
  ----------------------------------------------
  #############################################################################
  #
  # END OF THE CBO SETTINGS SECTION
  #
  #############################################################################
  
  
  #---FIN OF REQUIRED OPTIMIZER PARAMETERS-
  
  #
  # Client settings.
  #
  Remote_login_passwordfile = EXCLUSIVE lock
  #EMOTE_LOGIN_PASSWORDFILE = exclusive lock
  IFile=/U05/Oracle/visdb/9.2.0/DBS/VIS_linux2_ifile.ora
  [oracle@linux2 dbs] $
  
  Published by: HumanDBA on June 9, 2009 04:06

  Danny,

  Do you use a spfile to start the database? If Yes, then you must change this setting in the spfile so (issue "show the spfile parameter' to check).

  Kind regards
  Hussein

• Failed to add the shared member

  Hello
  I get the following error message when I'm loading members at my request of essbase. I chose option 'Allow duplicate Shared Members'.
  Any suggestions to fix this please (without renaming shared members)?
  
  Error message: failed to add the shared member (CM): a duplicate member is in outline, but it is in another dimension.
  
  Concerning
  
  Chandra

  You can only add members with the name or alias from another dimension, even if the names of the members in double is enabled. I do not recommend this. This problem often arises because you have the same name in several dimensions. Like other having to product and customer and division. We generally get around it by prefixing or suffixing the names in a dimension with something like prod others, cust-other, div-others. Pourriez you either prefix the entire generation by using the prefix option in the rule of load or for some names of members by using the option to replace the rule of lod

• How to set the name of the author and where I find all of the debug option token during the race or the creation of the application on QNX IDE?

  How to set the name of the author and where I find all of the debug option token during the race or the creation of the application on QNX IDE?

  Here is the error

  Failure of deployment: Info: request shipment: install and launch
  Info: Action: install and launch
  News: Native debugging: on
  Info: File size: 219949
  Info: Installing com.example.UIBB10AppTest1.testDev_B10AppTest15dd51c62...
  Info: Treatment 219949 bytes
  actual_dname:
  actual_id:
  actual_version:
  result::failure 881 the application author does not match the author token of debugging

  The author information is located in the bar - descriptor.xml in the tab "General". But the information must be defined automatically. In addition, you must install the token debug on your device.

  If everything is configured properly there is only one problem that happened to me. I had several chips debugging Momentics. I had to remove all chips debugging and leave alone the I want to use. Perhaps, you have also several debugging chips installed in Momentics. This seems to be a bug in Momentics who can't handle several chips debugging.

• Firefox cannot load a secure website and refuses to either continue with manual approval or fails to add the exception while it confirms the certificate as being valid.

  When you click on the link below, firefox will move the site but a notification that it cannot check the secure connection to the user. Technical details the certificate is not valid (no other useful information here) and the button "get out me of here ' reveals a screen where there is a message saying the certificate is valid and is not necessary to add an exception. All buttons are greyed out and thus preventing access to the site. No overrule or any other method works, so we (= society) are forced to use another browser to access our suppliers e-learning environment. I tried to change the two flags in topic: config, but apparently those who are depricated because they affect behavior. (browser.ssl.override_behavior and browser.xul.errorpages.expert_bad_cert) - edit: apparently the link falls. Here is the link: https://wbt.progress.com/

  There is an intermediate certificate missing (GlobalSign organization Validation CA) who is not sent by this server.

  • http://www.Networking4all.com/en/support/tools/site+check/

  If Firefox has not saved it to move to another site in the past, then you will get the error unreliable.

  • http://www.GlobalSign.com/support/intermediate/organizationssl_intermediate.php

• Can't remember password option not fails to add the site to the list of Exceptions

  In Firefox 24.0, I visit a Web site and enter the name of user and password. Popup asks me if I want to remember the password. I select never save password for this Site. I logout and log back plug-in software component. After you have entered the name of user and password, I still wonder if I want to remember password.

  Privacy tab: always use incognito mode is disabled

  Security tab: when I click on Exceptions, there is nothing displayed in the popup window

  How can I get FF to add the site to the exceptions list so that it stops to ask if I want to remember password whenever I visit your site?

  Figured it out. Seems the https sites are treated differently in the newer versions of the FF. To the left of the address in the address bar is a key. When I click the button, it asks if I want to remember the password. If I choose to never remember the password, it will then add the site to the exceptions list.

  I of course can't see anything on this new feature when I searched the support before entering my question. Is there a web page that I forgot?

• Failed to add the network printer

  Hello
  
  We have a client that connects to our ERP system to print orders.  They connect through a VPN site-to-site and then access our system through an RDP connection to a server 2008R2 instance.  The printer is a HP LaserJet 4100tn
  
  When I first set up in the spring I was intending to use the easy print with the redirect to printer driver to print orders.  However exceptionally slowly printed orders and I was not able to determine why.  Instead I've implemented their LaserJet as a local printer on our desktop server remotely using a HP LaserJet 4100 Series PCL6 driver.  It worked perfectly, and they have been printing without problem until yesterday.
  
  Yesterday for some reason any printer stopped working.  On our Remote Desktop server, it appeared as grayed out with an exclamation mark above.  I did the following diagnosis:
  
  > They can print from their own local office it
  > They changed and turn it on again
  > I can ping the printer from our server OK
  > I can get on the web interface of the printer OK from our server
  > Restart our server remote desktop
  > Turn off the Windows Firewall on the Remote Desktop server
  
  I therefore decided to remove the printer and add it again.  I go through the configuration wizard Windows printer usual choosing to do a new TCP/IP port, but when I put the IP address of the printer in Windows says that it is not the printer on the network (photo attached).
  
  I tried to delete the printer port which has been associated with this printer and remove the driver but Windows still won't "see" the printer.
  
  I am able to configure this printer on other servers from RD (2003 and 2008) and I also tried setting up on an old XP box, I had to hang out without problem.  Curiously, it seems only that this server is the only one that I can not set up the new even if it can ping the printer OK.
  
  I found a troubleshooting printer HP hereWeb page but who was no help, and the software does not work on Windows Server versions.
  
  Don't know what to do next!

  This was solved by changing the IP address of the printer

  After changing the IP address, I was able to add the printer to the server OK.

  I wasn't able to find out why this is the case, but guess it is some incorrect IP or the information stored in the registry.

• BlackBerry Smartphones transfer between Yahoo mail and Gmail service by default for the calendar

  Nice day

  I'm abandoned on the use of Yahoo Mail after 13 years.  I get expired and are having login problems and some of my messages have forwarded to my BlackBerry.  So I opted to use Gmail as my primary email provider and it has worked fine until now.

  I use the Outlook calendar on my phone and sync it with my Torch 9800 using the USB connection.  If I delete my Yahoo Mail as a sevice of default for the calendar, contacts and Messaing list and select Gmail as my default service how convert all my calendar and contacts with Gmail profile.  In fact, don't know if my list of contacts would be affected since I do not see the association from the list of contacts to my Yahoo Mail currently.   If I delete my Yahoo profile would be deleted my events or would they are transferred in the default calendar profile?  Or do I just sync it again with my vision and my events will be transferred to the Gmail profile after selecting the Gmail as my default service for the calendar and the contacts list.  I hope I explained this correctly.  I also have a profile on Facebook timeline showing birthday reminders, which I am trying to remove, but it is another problem.

  I want to do it right the first time and will not accidentally delete my events and contacts list.

  Thanks in advance.

  Prior to do any make a full backup of the device.

  I think that you can solve this problem by Gmail, default service. Then in the calendar app, go to Options. On the screen, enter the letters M O V E. Who should move all the events of the calendar by default. It's been a while since I've done it, though.

• Failed to add the key to unlocking C90

  My apologies in advance if this has been addressed.

  Press release by e-mail from TAC... downloaded and installed TCNC7.3.0.8cb420c

  Diagnostic reports lack the release key, click on "add the unlock key valid."

  .. .field for adding release button nowhere to be seen...

  What missed?

  Thanks in advance intelligent people.

  You used the wrong software version of TC, you used TCNC watching your orginal post and the screenshot, one where you requested the release key shows that you use the TC without the "NC".

  TC software uses encryption.

  Software TCNC does not use encryption.

• Failed to add the key to unlocking a Cisco C60

  The codec has been upgraded to TC 6.2.1 and it keeps giving an error-

  CRITICISM:

  Valid unlock key

  Key missing for TC6.2.1.69d401c release. The system will not be able to make all the calls. Please Add a unlock key valid.

  When I add the key to liberation, it is said

  Added unlock key.

  A

  reset

  It takes to the unlock key is taken into account.

  I rebooted the device and I did it a couple of times already, but he came back with the first error - no release key.

  any ideas?

  Lavanaya-

  I looked at your serial number (https://cisco.com/go/license) and noticed that the software is TCNC, which as described Martin does not support encryption.  You can check which version of the software you downloaded to the codec, you can check by going to the maintenance > Software Upgrade on the web interface of codec.  You should see something like the following: software version is TC6.3.0.3d8e7d1.  You can also look on the codec itself if you have direct access to the information system.

• Failed to add the custom library group object?

  I recently upgraded computer and reinstalled Livecycle on my new computer. On the new computer, in Livecycle, when you try to add a custom library of objects, object I get the following message:

  "Cannot add the object"name"to the Group of the library."

  I checked and made sure that in the properties of the group, all items "allow objects...". "are checked. The location of the libraries are in my file C:\Program Files (x 86) \Adobe\Acrobat 10.0\Designer 9.0\EN\Objects\ . Any idea what's going on? It will be a huge setback for me! I have to update the custom very often my objects.

  Thanks in advance.

  All of a sudden it just started working. Don't know what happened.

• Failed to add the menu item «Edit adjustment...» "action

  Hello

  I have an action in which I want to change an existing adjustment layer. I can't save the menu item «Edit adjustment...» "in the drop down palette layers.

  To add the step, I tried the following steps:

  1. Select the adjustment layer thumbnail icon
  2. Select «Insert Menu Item»... "in the menu palette flyout
  3. Choose "Edit settings...". "in the menu of the layers palette (how the window insert a Menu item" Menu item: layers: change the setting ")
  4. Press the OK"" button.

  This adds nothing to the action; usually, hit OK adds the menu item.

  I'm doing this right? Is this a known bug? As a solution, can someone point me to action with the step of "Edit settings...". "already in there? Thank you.

  Photoshop CC 2015.1.2 (20160113.r.355 x 64)

  Mac OS X 10.11.3

  I think that you make it harder than it is.  Just record the action and adjust the adjustment layer, you add during the recording of the action.  When did you record the action you should see that there two steps were recorded for the adjustment layer, you added during the recording of the action. "Do adjustment layer" and "current adjustment layer Set.  Insert a stop message with continue after the "make the adjustment layer ' step and check activate the dialog box in step"Set current adjustment layer".»  Layer when allowed by using the action, you can uncheck the walk of the stop.

  

• WS 2012 and NAS backup failed to prepare the backup image

  Hello

  I'm trying to back up some of my data to Windows server 2012. I am using LG - 250GL Buffalo NAS.

  I use the scheduled backup option, but it is unable to prepare the backup image, error code is "0x807800C5", event id 517."

  However, if I rename my folder name, and then it creates the folder and with successful backup my data, only problem is that it is said version is not compatible. Once again, if I change the name of the folder, it's OK, but I can't do that everyday manually, everything save automatically at certain time.

  I tried to find a solution, but nothing works.

  Maybe my NAS is a bit too old and is not compatible with the version of 2012.

  What are my options? Should I buy new SIN or is it fixable somehow?

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• Failed to add the service to the grey button vRA 6.2 Catalog Management-Add

  Hello

  I have published action plan, and now I need to publish it on our catalog, I am creating a service (Administration -> catalog -> Services Management ), but the + Add button is grey, I am connected with the role of Manager/Director of Group Business.

  any help would be appreciated.

  Please see att.

  Kind regards

  Preet

  The client administrator must be able to create the repair within catalog management. While business group Admin can make management of catalog objects to the title of existing services but don't get creative features, is why your BG Admin to add gray button.

  Are you sure that the name of user and password that you used is associated to customer Administrator role?

  To do this, you can do is compliant, wide system ([email protected]) tenant in default url administrator connection.

  Select your tenant in the list and edit, check in the third tab allows you to see if the account that you refer as tenant Admin is added under the customer Administrator role or if you are using groups to assign roles, please make sure that the user account is a member of the right-wing group.