WUSB600N does not work on Windows 7 Ultimate - even with the drivers of the site

Similar Questions

• UNC paths does not work in Windows 7 command prompt of the Samba server to a Linux server

  The following command works fine in Windows XP, Windows 2003, etc., but does not work in Windows 7:

  dir \\myhist\myshare

  In Windows 7, it fails with "the system cannot find the file specified."

  Is this a bug or is it a 'work-around '?

  Windows 7 has a different layout of Windows Explorer, then Windows XP and Windows 2003...

  1. go to Windows Explorer and look for the folder

  2. at the top, copy the path, and then try again.

  --
  Gina Whipp
  Microsoft MVP (access)

  Please post all responses on the forum where everyone can enjoy.

• CS2 does not work on Windows 10 that I entered the serial number provided, but I get an error

  I entered the serial number provided on the CS2 activation set up the link. He said that there is an error. Acrobat 7 does not work on windows 10

  Hello

  Yes, Acrobat 7 is not compatible with Windows 10. It may or may not work on Windows 10.

  .

  Thank you!

  Shivam

• my password does not work on windows vista. I get the message user profile service has no logon

  My password does not work. I get the message user profile service has no logon. Help please.

  Hello

  You can try the following.

  Shut down the laptop.  Tap away at f8 that you start the laptop to enter the Windows Recovery Console.  Use the arrow keys to select Safe mode and press ENTER.  If windows will load in this mode, on the Start Menu, click principally made programs, click Accessories, click System Tools and run the system restore.  Choose a restore point at least 24 hours prior to the issue of logon and then proceed to the restoration.  When you are finished, Windows will restart as normal in order to check if you can now connect correctly.

  Another option if the above does not help is as follows.

  Shut down the laptop.  Tap away at f8 that you start the laptop to enter the Windows Recovery Console.  Use the arrow keys to select "Start using last good known Configuration" and press ENTER.

  Kind regards

  DP - K

• IncrediMail Plus does not work in Windows 8 PRO, even in compatibility mode

  Since the installation of Windows 8 PRO my incredimail Plus program e-mail does not work even in different compatibility modes.

  IncrediMail (Perion) technical support is worse than useless and aren't even not respond to requests for advice or assistance

  I found a post on their forums date dated 1/12 Nov: http://forums.incredimail.com/viewtopic.php?t=11167#p42981 indicating

  Please note that IncrediMail 2.5 version is now fully compatible with Windows 8.

  Note: This version uses IMAP technology so that you can experience problems when importing the old backup files.

  No mention of how to get around that.
  

• Task Scheduler does not work on Windows 7 Ultimate

  I tried to start planning the task on Windows 7 Ultimate. The Scheduler tasks window and the message will then appear that "the Task Scheduler service is not available. Task Scheduler will attempt to reconnect to it.

  After clicking on OK button the Task Scheduler app stays on, but I'm not sure it works...

  Services applet shows this "Task Scheduler" service started and in automatic mode.

  Any help would be greatly appreciated!

  Thank you for your solution. In fact, I found a easier:

  1. backup tasks under folder C:\Windows\system32\Tasks

  2 remove all the tasks in the C:\Windows\system32\Tasks folder

  3. then add tasks one by one.

  I found this task under M:\Backup\Task backup\Microsoft\Windows\Media Center called mcupdate_scheduled, the message appears. Given that I do not care much for Media Center I does not simply restore this task

  Thank you!

• Update does not work for Windows Vista Ultimate Edition

  During the 2 days Windows Update fails on my laptop, with Vista Ultimate fully patched and updated on 04/07/09. I can't find anything that was instaled in recent days, with the exception of a definition for Windows Defender update, that could cause this problem. Here's what the error log when WU fails:

  Signature of the problem:

  Problem event name: APPCRASH

  Application name: svchost.exe_wuauserv

  Application version: 6.0.6001.18000

  Application timestamp: 47918b 89

  Fault Module name: Cabinet.dll

  Fault Module Version: 6.0.6001.18000

  Timestamp of Module error: 4791a63d

  Exception code: c0000005

  Exception offset: 00005891

  OS version: 6.0.6002.2.2.0.256.1

  Locale ID: 1033

  Additional information 1: 2fe6

  More information 2: 41a941e929968708854a18a13efb2228

  Additional information 3: 2d 09

  Additional information 4: 9e6f6eb1fb900af63ef99522d1da56b0

  A weird symptom of the accident, is that it also disables Aero.

  Hello Epa80,

  I hope you do well. This problem may occurbecause files (BITS) Background Intelligent Transfer Service status are corrupt. This problem stops the host process for Windows Services.  For more information about this error and how to resolve this problem, follow the steps described in this article below:

  http://support.Microsoft.com/kb/939159

  Please follow the steps and let me know if it works.

  I hope that solves your problem.

  Thank you.

• Bluetooth does not work in windows 8 64-bit in the sony vaio sve15123cn model

  I have laptop sony vaio e series. Bluetooth doesn't work does not correctly. Please send me suggestions.

  Hi Lovedeep,

  1. what exactly is the problem with Bluetooth?

  2. are you referring to any Bluetooth device?

  3 have there been recent changes made on the computer before the show?

  I suggest you follow these methods and check if it helps.

  Method 1: Run the troubleshooter of material and check out la.

  a. press the keys Windows + C on your keyboard to show the charms.

  b. type Troubleshooting , and then click solving problems under settings.

  c. now, type Hardware Troubleshooter in the option Search .

  d. click convenience hardware store to run the troubleshooter.

  Method 2: Check if the Bluetooth support Service is started.

  a. press the Windows key + R, typeservices.mscand press ENTER.

  b. right-click on the service namedBluetooth support Service.

  c. check to see if it is started, otherwise click Start.

  Please post back with the results and we will be happy to help you further.

• Qosmio F50-126 - Subwoofer does not work in Windows 7

  My subwoofer does not work in Windows 7.
  I installed the audio driver Dolby Digital... Basically controls the bass.

  That didn't activate it because I don't think the pulse of air, that I used to get under Vista. What driver am I missin?

  I don't have this model laptop but it will be interesting to know if you have that you compared the sound settings in Vista and Win7?
  Can you change anything to make box works properly?

  AFAIK there is no special driver for subwoofer features.

• Rich Textbox example does not work in Windows 7

  In the past, I use the example of the Rich Textbox (\samples\userint\activex\richTextxbox.prj) in Windows XP (CVI 2010 SP1).

  Now, I noticed that this example does not work in Windows 7 64 bit because the ActiveX is not registered on the system (see error.jpg).

  This control is not installed by CVI IDE itself?

  How can I get this example to work on my Win 7 64 bit machine?

  Hey Vix

  It seems that the Rich Textbox control component provided by one of the VB Runtime is more included by default with Windows 7.

  I was able to manually record using Regsvr32 ActiveX control as described in the following Microsoft KB.

  I managed to download the ActiveX control needed here and there, you must copy the .ocx for the ActiveX control in your C:\Windows\SysWOW64 directory. Open an administrator command prompt and run "REGSVR32 RICHTX32. OCX'.

  SysWOW64 is the "Windows on Windows" emulation directory which is used for the execution of 32-bit controls in a 64-bit environment.

  I realize this isn't the best solution by making the deployment of applications a little more complicated, another solution would be to use another control ActiveX RTF like the one here: http://www.lebans.com/richtext.htm.

  Thank you

• Cisco Anyconnect VPN does not work in windows 7 64 bit

  Hello
  I found that the cisco anyconnect (version 3, any series) does not work in windows 7 (64-bit).
  The vpn is connected, but there is not any internet access.

  I tried to solve the problems of:

  -Disabling the firewall.

  -disable the anti-virus etc.

  But while I tried using with 32 bit, it works very well.

  Also, I found that there is not a specific version of anyconnect vpn for only 64-bit.

  Do any body have the idea how to solve this problem, either it's a bug of cisco vpn itself?

  Certainly, you just need to install a later version of AnyConnect.  You need a Cisco, for example a SmartNet maintenance contract, to download the new versions.

• Satellite A505-s6970: Toshiba Service Station does not work on Windows 7

  Hey guys I need your help,

  I installed windows 7 ultimate on my toshiba Satellite A505 s6970 and I downloaded all the drivers from http://www.csd.toshiba.com/ and I installed all.

  When I open the Device Manager, 3 devices are not installed (Base-2 system device / / 1-Unknown device).
  Then I installed toshiba service station (Windows Vista / 7 32-64 bit because my windows is 64) it will search for and automatically download all necessary devices, but it does not work on windows 7, it worked perfectly in windows vista.

  Also the eco utility does not work, and the media touch buttons work just fine, but without giving that voice tone.

  Thanks for your help

  Hello

  To be honest I have no experience with this tool.
  I m using Tempro.

  However, I guess that Toshiba service station was not tested and not designed for Win 7 at the moment.
  You may need to wait for the next update that works correctly with Windows 7.

  You must understand that the Windows 7 drivers have been released in Beta version, it would mean that the final version would be released in the near future
  In my opinion, you should take a look from time to time on the Toshiba page we.
  I noticed that each new day pilot is released and released.

• I installed Windows XP on my new computer (with Windows 7 PRO), but my USB does not work on Windows XP. It works fine on Windows 7

  I installed Windows XP on my new computer (with Windows 7 PRO), but my USB does not work on Windows XP. It works fine on Windows 7.

  Hello

  And much more: (XP mode requires professional, Ultimate or Enterprise).
  

  Get all the benefits of Windows 7 and continue to take advantage of your investments and more
  business and productivity programs that require a PC running Windows XP.

  Note: Windows XP Mode requires a download.
  http://www.Microsoft.com/Windows/Windows-7/features/Windows-XP-mode.aspx

  Windows XP mode
  http://www.Microsoft.com/Windows/Virtual-PC/Download.aspx

  Windows XP Mode is supported through Technet

  TechNet - Forums - Windows 7 virtualization
  http://social.technet.Microsoft.com/forums/en/w7itprovirt/threads

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Jet 7 Tablet 5709: HP Jet 7 touch screen does not work in Windows even if it works in the BIOS menu advanced starup

  Less than two months ago, I upgraded my HP Jet Windows 7 to 10. Over time some questions popped up (random apps that could not be opened, etc.) so I decided to do a full reset, deleting the files from the user. Once the 'install' process is complete he brought me to the initial configuration for Windows 10 screen, asking me my keyboard and language preference. He would not accept any contact entry. I rebooted it and he went to the advanced configuration where I could use the touch screen to do a complete reset. That has not changed anything. I found the info on the HP website and did a reset of the BIOS. That has not changed anything. I got an OTG cable, but was not able to get a keyboard work. I did, however, get a mouse works and has managed to create a new user and login. However, the touchscreen does not work in Windows. I was able to get into the settings and looked at the Device Manager settings. There was only a mouse driver listed under Human Interface. I also noticed a number of question marks in the subtopic of the processor drivers.

  I was able to use the OTG cable to try to re - install Windows 10 from a USB key. When a similar initial settings (language, keyboard) screen broke, I couldn't use the touchscreen. Later, I created a USB with Windows 8.1 thinking he might have a better chance. The same problem. He does not touch inputs. And with a key USB installed via the OTG cable, I can't launch a mouse at the same time.

  It is strange that I have not the problem in the BIOS or advanced startup options. It seems that there is a corruption somewhere, but how do I fix?

  Hello Moronihah,

  You did a clean install (delete all files and programs) the 2nd time you reinstalled Windows 10?

  That's what you need to do first.

  Then, you have to go to the HP website and install the drivers on your USB.

  Above all, you need to include the Goodix Touch Controller Driver and pilot, allowing Malta G-Sensor.

  HP Software and Driver Downloads

  You're using a hub 4 ports with your OTG cable? Which will allow you to use the mouse, the keyboard and the entire USB drive.

  

• Touch screen does not work in Windows XP - Portege 3505

  Hey

  Anyone know why the touch screen on my portege 3505 does not work in windows xp?

  A lot of cheers

  Steve

  and no one knows what you have done or installed on your laptop?

  Sorry about that, but who need to know that? Have you changed something on your laptop >
  Did you install a new OS? Have you used the Toshiba recovery image?