X1Carbon initial start-up: hung during the installation of SugarSync / activation

Similar Questions

• HP T610 more: HPDM deployment for t610 image more crashes during the installation of the new initial start of the image

  We are working on the update of our thin clients HP T610 more.  Update us the thin clients in the last image of the OS WES7P and also update to IE11 and Citrix receiver 4.4.

  We use HPDM 4.6.4

  We have successfully several T610s and update the image of the OS and related software with no problems.  We are then able to use the 4.6.4 to successfully shoot HPDM and image of these thin clients updated in the master repository.

  We then create a task to deploy the new image to several thin clients.  We configure the task to use the imagery being cached, and then run the task.  HPDM then successfully deploys the image for thin clients.

  Customers accept the image cache and once the image is fully downloaded they restart to deploy the image.   After the restart, the image unfolds and decompresses correctly, then the thin client, start the original installation of Windows.

  But for 90% or more of these newly imaged thin clients that they get hung up during the installation of Windows (usually during the message that windows is written to the Registry).  Once the thin clients get hung at this stage they are inaccessible and unrecoverable by HPDM and must be copied via USB.

  We believe that the issue is somehow related monitors are connected to thin clients.  If isolate us completely thin clients monitors, then deploy an image the new image is OK.  HPDM reports that the image has been deployed successfully.  If we then go back to thin clients and reconnect the monitors of the thin client is updated and the screen seems to be in standard vga mode low resolution.  A restart of the thin client then recognizes and sets the appropriate screen resolution, and the thin client is good to go.

  What is normal sound monitors must be separated to deploy a new image?

  Thanks for any idea or thougts.

  From the point of view HPDM, disconnect monitor is not required when you deploy the image. Personal thought is that there is a compatibility problem between the display driver, graphics card and the system. Installing Windows intend to write a default registry value based on connected monitor (maybe display settings), for some reason, he was stuck. I'm not the driver or the operating system that you are an expert, I would say that you submit a ticket to HP for additional troubleshooting.

• My MacBook froze during the installation of the update at El Capitan and now I am unable to connect to any except the screen of the guest user. There was a message of panic, and somewhere in there, he said no set of OS. I tried to start without danger, it

  My MacBook froze during the installation of the update at El Capitan and now I am unable to connect to any except the screen of the guest user. There was a message of panic, and somewhere in there, he said no set of OS. I tried to start without danger, it does not work either.

  This general situation may be similar to what is mentioned in this sequel to thread of the CSA

  and if the remedy is to use instructions; detailed and I hope they are correct...

  Re: Restart fails after installation of El Capitan help!

  Or you can try and see on the repair of the system and then if your disk utility can

  See the Macintosh HD, as a boot volume, you could restart from OS X Recovery to

  the Mac system, to see if this solves the problem. There may be more than one cause.

  You could try and boot into OS X Recovery, utilities out there, and other options are available.

  • OS X: on OS X Recovery - Apple Support

  This example uses a special partition on the hard drive of recovery which is not in the

  same disc that the Mac OS X section; However if your hard drive is missing, these other

  items may also be at risk. You must have and maintain backups of your duplicate content

  on the external storage drives closed; In addition, a Time Machine backup helps to restore.

  • Apple OS X and Time Machine tips:

  http://pondini.org/OSX/home.html

  • Tips for OS X - using HD recovery:

  http://pondini.org/OSX/RecoveryHD.html

  {Using the utility disc and other tools can be done from the boot OS X Recovery volume

  Beware of the fact these tools can also delete or reformat your content; wiping.}

  Don't know what to say; you could see visiting an Apple store with genius if

  There is an official store. Usually for best time planning you would contact them for an appointment.

  • Make an appointment at an Apple Retail Store Genius Bar
  • Find an Apple authorized service provider
  • https://locate.Apple.com/country - Apple - find places - selector of country (if outside the U.S.)

  Or if there is no official retail Apple Store with genius, the following suggestion would be to contact

  a service provider authorized Apple, an independent specialist who is qualified in the repair of Apple.

  In any case...

  Good luck & happy computing!

• root.sh failed during the installation of RAC11.2g

  Dear,

  I try to install RAC 11.2 (version of the grid Infrastructure is 11.2.0.1) on both nodes of linux (OS version is 2.6.39 - 400.215.10.el5uek Oracle Linux 5.11)

  SELinux + Firewall is stopped, ASM works fine (listdisks and querydisk has my drives correctly), ping between two nodes on public and private IPs is OK, the hosts file, configured for good.

  Owner of the DSO is grid user, and this user is the same used during the installation of the grid infrastructure.

  # /sbin/modinfo oracleasm
  filename:       /lib/modules/2.6.39-400.215.10.el5uek/kernel/drivers/block/oracleasm/oracleasm.ko
  description:    Kernel driver backing the Generic Linux ASM Library.
  author:         Joel Becker <[email protected]>
  version:        2.0.8
  license:        GPL
  srcversion:     28484D2A43A6D981AAB9246
  depends:        
  vermagic:       2.6.39-400.215.10.el5uek SMP mod_unload modversions 
  parm:           use_logical_block_size:Prefer logical block size over physical (Y=logical, N=physical [default]) (bool)
  

  Installation was fine, no errors or warnings until running root.sh, the result was:

  
  

  # /opt/app/grid/product/11.2.0/grid/root.sh
  Running Oracle 11g root.sh script...
  
  The following environment variables are set as:
      ORACLE_OWNER= grid
      ORACLE_HOME=  /opt/app/grid/product/11.2.0/grid
  
  Enter the full pathname of the local bin directory: [/usr/local/bin]: 
     Copying dbhome to /usr/local/bin ...
     Copying oraenv to /usr/local/bin ...
     Copying coraenv to /usr/local/bin ...
  
  
  Creating /etc/oratab file...
  Entries will be added to the /etc/oratab file as needed by
  Database Configuration Assistant when a database is created
  Finished running generic part of root.sh script.
  Now product-specific root actions will be performed.
  2015-04-20 17:06:03: Parsing the host name
  2015-04-20 17:06:03: Checking for super user privileges
  2015-04-20 17:06:03: User has super user privileges
  Using configuration parameter file: /opt/app/grid/product/11.2.0/grid/crs/install/crsconfig_params
  Creating trace directory
  LOCAL ADD MODE 
  Creating OCR keys for user 'root', privgrp 'root'..
  Operation successful.
    root wallet
    root wallet cert
    root cert export
    peer wallet
    profile reader wallet
    pa wallet
    peer wallet keys
    pa wallet keys
    peer cert request
    pa cert request
    peer cert
    pa cert
    peer root cert TP
    profile reader root cert TP
    pa root cert TP
    peer pa cert TP
    pa peer cert TP
    profile reader pa cert TP
    profile reader peer cert TP
    peer user cert
    pa user cert
  Adding daemon to inittab
  CRS-4123: Oracle High Availability Services has been started.
  ohasd is starting
  acfsroot: ACFS-9301: ADVM/ACFS installation can not proceed:
  
  acfsroot: ACFS-9302: No installation files found at /opt/app/grid/product/11.2.0/grid/install/usm/EL5/x86_64/2.6.18-8/2.6.18-8.el5uek-x86_64/bin.
  
  CRS-2672: Attempting to start 'ora.gipcd' on 'node01'
  CRS-2672: Attempting to start 'ora.mdnsd' on 'node01'
  CRS-2676: Start of 'ora.gipcd' on 'node01' succeeded
  CRS-2676: Start of 'ora.mdnsd' on 'node01' succeeded
  CRS-2672: Attempting to start 'ora.gpnpd' on 'node01'
  CRS-2676: Start of 'ora.gpnpd' on 'node01' succeeded
  CRS-2672: Attempting to start 'ora.cssdmonitor' on 'node01'
  CRS-2676: Start of 'ora.cssdmonitor' on 'node01' succeeded
  CRS-2672: Attempting to start 'ora.cssd' on 'node01'
  CRS-2672: Attempting to start 'ora.diskmon' on 'node01'
  CRS-2676: Start of 'ora.diskmon' on 'node01' succeeded
  CRS-2676: Start of 'ora.cssd' on 'node01' succeeded
  CRS-2672: Attempting to start 'ora.ctssd' on 'node01'
  CRS-2676: Start of 'ora.ctssd' on 'node01' succeeded
  
  DiskGroup DATA creation failed with the following message:
  ORA-15018: diskgroup cannot be created
  ORA-15130: diskgroup "DATA" is being dismounted
  
  
  Configuration of ASM failed, see logs for details
  Did not succssfully configure and start ASM
  CRS-2500: Cannot stop resource 'ora.crsd' as it is not running
  CRS-4000: Command Stop failed, or completed with errors.
  Command return code of 1 (256) from command: /opt/app/grid/product/11.2.0/grid/bin/crsctl stop resource ora.crsd -init
  Stop of resource "ora.crsd -init" failed
  Failed to stop CRSD
  CRS-2673: Attempting to stop 'ora.asm' on 'node01'
  CRS-2677: Stop of 'ora.asm' on 'node01' succeeded
  CRS-2673: Attempting to stop 'ora.ctssd' on 'node01'
  CRS-2677: Stop of 'ora.ctssd' on 'node01' succeeded
  CRS-2673: Attempting to stop 'ora.cssdmonitor' on 'node01'
  CRS-2677: Stop of 'ora.cssdmonitor' on 'node01' succeeded
  CRS-2673: Attempting to stop 'ora.cssd' on 'node01'
  CRS-2677: Stop of 'ora.cssd' on 'node01' succeeded
  CRS-2673: Attempting to stop 'ora.gpnpd' on 'node01'
  CRS-2677: Stop of 'ora.gpnpd' on 'node01' succeeded
  CRS-2673: Attempting to stop 'ora.gipcd' on 'node01'
  CRS-2677: Stop of 'ora.gipcd' on 'node01' succeeded
  CRS-2673: Attempting to stop 'ora.mdnsd' on 'node01'
  CRS-2677: Stop of 'ora.mdnsd' on 'node01' succeeded
  Initial cluster configuration failed.  See /opt/app/grid/product/11.2.0/grid/cfgtoollogs/crsconfig/rootcrs_node01.log for details
  
  

  
  

  I found the rootcrs_node01.log file:

  2015-04-20 17:06:20: Removing "/etc/rc.d/rc3.d/S96ohasd"
  2015-04-20 17:06:20: Removing file /etc/rc.d/rc3.d/S96ohasd
  2015-04-20 17:06:20: Failure with return code 1 from command rm /etc/rc.d/rc3.d/S96ohasd
  2015-04-20 17:06:20: Failed to remove file: 
  2015-04-20 17:06:20: Creating a link "/etc/rc.d/rc3.d/S96ohasd" pointing to /etc/init.d/ohasd
  2015-04-20 17:06:20: Removing "/etc/rc.d/rc5.d/S96ohasd"
  2015-04-20 17:06:20: Removing file /etc/rc.d/rc5.d/S96ohasd
  2015-04-20 17:06:20: Failure with return code 1 from command rm /etc/rc.d/rc5.d/S96ohasd
  2015-04-20 17:06:20: Failed to remove file: 
  2015-04-20 17:06:20: Creating a link "/etc/rc.d/rc5.d/S96ohasd" pointing to /etc/init.d/ohasd
  2015-04-20 17:06:20: Removing "/etc/rc.d/rc0.d/K19ohasd"
  2015-04-20 17:06:20: Removing file /etc/rc.d/rc0.d/K19ohasd
  2015-04-20 17:06:20: Failure with return code 1 from command rm /etc/rc.d/rc0.d/K19ohasd
  2015-04-20 17:06:20: Failed to remove file: 
  2015-04-20 17:06:20: Creating a link "/etc/rc.d/rc0.d/K19ohasd" pointing to /etc/init.d/ohasd
  2015-04-20 17:06:20: Removing "/etc/rc.d/rc1.d/K19ohasd"
  2015-04-20 17:06:20: Removing file /etc/rc.d/rc1.d/K19ohasd
  2015-04-20 17:06:20: Failure with return code 1 from command rm /etc/rc.d/rc1.d/K19ohasd
  2015-04-20 17:06:20: Failed to remove file: 
  2015-04-20 17:06:20: Creating a link "/etc/rc.d/rc1.d/K19ohasd" pointing to /etc/init.d/ohasd
  2015-04-20 17:06:20: Removing "/etc/rc.d/rc2.d/K19ohasd"
  2015-04-20 17:06:20: Removing file /etc/rc.d/rc2.d/K19ohasd
  2015-04-20 17:06:20: Failure with return code 1 from command rm /etc/rc.d/rc2.d/K19ohasd
  2015-04-20 17:06:20: Failed to remove file: 
  2015-04-20 17:06:20: Creating a link "/etc/rc.d/rc2.d/K19ohasd" pointing to /etc/init.d/ohasd
  2015-04-20 17:06:20: Removing "/etc/rc.d/rc4.d/K19ohasd"
  2015-04-20 17:06:20: Removing file /etc/rc.d/rc4.d/K19ohasd
  2015-04-20 17:06:20: Failure with return code 1 from command rm /etc/rc.d/rc4.d/K19ohasd
  2015-04-20 17:06:20: Failed to remove file: 
  2015-04-20 17:06:20: Creating a link "/etc/rc.d/rc4.d/K19ohasd" pointing to /etc/init.d/ohasd
  2015-04-20 17:06:20: Removing "/etc/rc.d/rc6.d/K19ohasd"
  2015-04-20 17:06:20: Removing file /etc/rc.d/rc6.d/K19ohasd
  2015-04-20 17:06:20: Failure with return code 1 from command rm /etc/rc.d/rc6.d/K19ohasd
  2015-04-20 17:06:20: Failed to remove file: 
  2015-04-20 17:06:20: Creating a link "/etc/rc.d/rc6.d/K19ohasd" pointing to /etc/init.d/ohasd
  2015-04-20 17:06:20: The file ohasd has been successfully linked to the RC directories
  
  

  
  

  What did I miss?

  
  

  Kindly advice...

  Best regards
  

  Hello

  It seems some problems with the drive carrier

  Create DiskGroup DATA failed with the following message is displayed:

  ORA-15018: diskgroup cannot be created.

  ORA-15130: diskgroup 'DATA' is currently disassembled

  Check below link, seems a similar question:

  ASM error in root.sh createdisk

  Thank you

  Monowar

• ERROR: An error occurred during the installation of assembly component / ERROR: load capacity of third-party installer Adobe_Lightroom_x64.msi failed with exit code: 1603

  During the Installation of LR, I get an error message. Initially, I didn't have enough space for the installation on the boot partition drive. However, now, it should be enough and I rebooted the computer, a couple of times, so I guess that the temporary installation files have been deleted.

  Now, however every time I try to reinstall the software I get the following messages:

  ------------------------------------------------------------------------------------------ ------------------------------------------------------------------------------------------ ---

  ERROR: An error occurred during the installation of Assembly component {6435B7C0-E0C8-3EA2-91AE-7640034EAFCE}. HRESULT: 0 X 80070002.

  ERROR: Install payload MSI failed with the error: 1603 - Schwerwiegender Fehler bei der Installation.

  MSI error message: an error occurred during the installation of Assembly component {6435B7C0-E0C8-3EA2-91AE-7640034EAFCE}. HRESULT: 0 X 80070002.

  ERROR: installer of third party Adobe_Lightroom_x64.msi payload failed with exit code: 1603

  ------------------------------------------------------------------------------------------ ------------------------------------------------------------------------------------------ ---

  Given that the PS has been installed without problem I refrain from uninstalling the creative cloud and start over.

  Any tips?

  THX

  Claasd5335054 these errors can be found in the event viewer.  It is available through the Administrative Tools Control Panel.

• During the installation of recovery that it off

  I recently baught a new laptop computer from a friend and I so wanted to restore factory settings. I inserted the disc and went through the adjustment, and he began to restore. At halfway through the process of close to 50% turns off/on overheating. It tells me to insert the disc starts, which I did not, and now I don't know what to do because it does not start without it.

  What can I do and where can Iget a new?

  Please answer ([email protected])

  Thank you!!

  Hello

  I think the solution to this problem is quite easy. If the computer turns off during the installation of recovery you need to do this installation once again, I think that because some files are missing, etc.

  Then boot from the recovery disc and try again.

  By the way: it would be interesting to know which laptop, you have exactly. If it overheat, try to clean it using the jet of compressed air. ;)

• During the installation of Windows 7 or 8.1 using a USB stick - get the message "cannot be installed, it is a GPT.

  Hello

  During the installation of Windows 7 or 8.1 using a USB stick - get the message "cannot be installed, it is a GPT partition.

  I have 64 bit install discs for Win 7 and Win 8.1. These two install on my desktop in duel boot. I made a Flash DRIVE of each disk so I can install it more quickly.

  Problem: I get the cannot install because it is a GPT partition.

  Y at - there no way to make these 2 USB sticks work?

  Thank you, Brad

  Make sure you create your media recovery HP or USB Flash Recovery discs before you edit or change anything.

  Your computer does not have Microsoft's Downgrade rights and you must buy a copy of Windows 7 with a valid Microsoft COA and product key.

  The screenshots below is from a laptop HP 15 t-j100... options and the configuration on your computer screens may differ.

  You will need to DISABLE "Secure Boot" and ENABLE "Legacy Support" in the "Configuration of the BIOS start-up secure" on the settings page similar to what is shown below, until you try to install Windows 7.

  

  After you save the changes, the computer will ask you to confirm the changes... Accept the changes by typing the four digit code and press the ENTER"" key.

  

  If you install Windows 7 from a USB and see a message of "load a driver - a required CD/DVD drive device is missing", it's because as 'System Configuration' > 'Config USB3.0 in pre-start' is set to 'Enabled '. This should be set to 'Auto '.

  

  In addition, as the factory hard drive is partitioned as TPG, you must start using the internal CD/DVD UEFI or UEFI-Key/key USB to install Windows on a GPT-partitioned disk. Turn on or restart the computer and press "F9" or "ESC", then "F9" when prompted. Select the source of boot UEFI you use and you press "ENTER".

  

  I suggest using Windows 7 SP1 for the best installation experience. If the DVD does not start as UEFI, you may need to use a USB Flash drive (can ask "Quick start" DISABLING in BIOS) as the installation media. Please note that some computers may not recognize a valid active UEFI USB Flash drive if it is formatted in NTFS and may require only a FAT32 formatted USB Flash drive. You should be able to make a FAT32 formatted Windows 7 installation USB Flash drive using Rufus, UNetbootin, Universal USB Installeror WiNToBootic. I like Rufus, because it contains options for 'Plan of GPT partition for UEFI computer' and 'FAT32'.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• Error 1935.An error occurred during the installation of Assembly component {98CB24AD-52FB-DB5F-A01F-C8B3B9A1E18E}. HRESULT: 0X800736CC.

  Following error message encountered when installing SSO64 bits on Windows Server 2008 R2 Standard 64-bit edition.

  Error 1935.An error occurred during the installation of Assembly component {98CB24AD-52FB-DB5F-A01F-C8B3B9A1E18E}. HRESULT: 0X800736CC.
  [12:40:34 of Info] List MessageBox with text: Error 1935.An error occurred during the installation of Assembly component {98CB24AD-52FB-DB5F-A01F-C8B3B9A1E18E}. HRESULT: 0X800736CC. Return code: 1

  I tried to reinstall VC ++ 2005 SP1 Redistributable, but it did not work.

  I tried to rename a folder for vc ++ in the winsxs folder, but without permission to do so.

  Here's the Setup log:

  = Recording started: 01/03/2012-12:40:11 Build type: SHIP UNICODE 5.00.7600.00 appeal process: C:\Users\SA_KPN~1\AppData\Local\EBZ28334.tmp\Setup.exe =.
  MSI (c) (C0:58) [12:40:11:525]: Resetting cached policy values
  MSI (c) (C0:58) [12:40:11:525]: value of strategy Machine 'Debug' is 0
  MSI (c) (C0:58) [12:40:11:525]: * RunEngine:
  Product: SSO x64\SSO64\SSO64.msi
  Action:
  Command line:
  MSI (c) (C0:58) [12:40:11:525]: Client and UI is none or basic: full installation running on the server.
  MSI (c) (C0:58) [12:40:11:525]: grabbed execution mutex.
  MSI (c) (C0:58) [12:40:11:525]: Cloaking enabled.
  MSI (c) (C0:58) [12:40:11:525]: attempt of activation of all disabled privileges before calling install on server
  MSI (c) (C0:58) [12:40:11:525]: meter is incremented to disable the stop. Counter after increment: 0
  MSI (s) (C AC:3) [12:40:11:525]: running the installation inside the multi-package transaction \SSO x64\SSO64\SSO64.msi
  MSI (s) (C AC:3) [12:40:11:525]: grabbed execution mutex.
  MSI (s) (AC:64) [12:40:11:525]: Resetting cached policy values
  MSI (s) (AC:64) [12:40:11:525]: value of strategy Machine 'Debug' is 0
  MSI (s) (AC:64) [12:40:11:525]: * RunEngine:
  Product: SSO x64\SSO64\SSO64.msi
  Action:
  Command line:
  MSI (s) (AC:64) [12:40:11:540]: meter is incremented to disable the stop. Counter after increment: 0
  MSI (s) (AC:64) [12:40:11:540]: value of strategy Machine 'DisableUserInstalls' is 0
  MSI (s) (AC:64) [12:40:11:540]: meter is incremented to disable the stop. Counter after increment: 1
  MSI (s) (AC:64) [12:40:11:540]: SRSetRestorePoint is ignored for this transaction.
  MSI (s) (AC:64) [12:40:11:540]: disable the stop against the decrement. If counter > = 0, will be denied the stop.  Counter after decrement: 0
  MSI (s) (AC:64) [12:40:11:540]: Note: 1: 1402 2: HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer 3:2
  MSI (s) (AC:64) [12:40:11:571]: file will have the applied safety of OpCode.
  MSI (s) (AC:64) [12:40:11:587]: disable the stop against the decrement. If counter > = 0, will be denied the stop.  Counter after decrement:-1
  MSI (s) (AC:64) [12:40:11:587]: STRATEGY of RESTRICTION SOFTWARE: Verifying package--> 'SSO x64\SSO64\SSO64.msi' against the software restriction policy
  MSI (s) (AC:64) [12:40:11:587]: STRATEGY of RESTRICTION SOFTWARE: SSO x64\SSO64\SSO64.msi has a digital signature
  MSI (s) (AC:64) [12:40:21:603]: STRATEGY of RESTRICTION SOFTWARE: SSO x64\SSO64\SSO64.msi is allowed to run at the level of authorization 'unlimited '.
  MSI (s) (AC:64) [12:40:21:603]: dialogue of end not activated
  MSI (s) (AC:64) [12:40:21:603]: original ==> SSO x64\SSO64\SSO64.msi packing
  MSI (s) (AC:64) [12:40:21:603]: we're running out of ==> C:\Windows\Installer\1ebf5f91.msi package
  MSI (s) (AC:64) [12:40:21:619]: APPCOMPAT: replacements of compatibility mode properties found.
  MSI (s) (AC:64) [12:40:21:619]: APPCOMPAT: looking for entry with ProductCode '{F89B22BC-2768-4237-B300-5CFA52D9AC84}' appcompat database
  MSI (s) (AC:64) [12:40:21:619]: APPCOMPAT: no matching ProductCode found in the database.
  MSI (s) (AC:64) [12:40:21:619]: MSCOREE already loaded, using the loaded copy
  MSI (s) (AC:64) [12:40:21:619]: value of strategy Machine 'TransformsSecure' is 1
  MSI (s) (AC:64) [12:40:21:619]: value of strategy Machine 'DisablePatch' is 0
  MSI (s) (AC:64) [12:40:21:619]: value of strategy Machine 'AllowLockdownPatch' is 0
  MSI (s) (AC:64) [12:40:21:619]: value of strategy Machine 'DisableLUAPatching' is 0
  MSI (s) (AC:64) [12:40:21:619]: value of strategy Machine 'DisableFlyWeightPatching' is 0
  MSI (s) (AC:64) [12:40:21:619]: APPCOMPAT: looking for entry with ProductCode '{F89B22BC-2768-4237-B300-5CFA52D9AC84}' appcompat database
  MSI (s) (AC:64) [12:40:21:619]: APPCOMPAT: no matching ProductCode found in the database.
  MSI (s) (AC:64) [12:40:21:619]: transformations are not secure.
  MSI (s) (AC:64) [12:40:21:619]: PROPERTY CHANGE: adding MsiLogFileLocation property. Its value is ' C:\Users\acc\AppData\Local\Setup(030112 124011) .log.
  MSI (s) (AC:64) [12:40:21:619]: command line: ADDLOCAL = froot, server, SSOMMC, Admin, Pwdsync INSTALLDIR = c: Files\Enterprise Single Sign - dans\ FILESINUSEERROR = CURRENTDIRECTORY=C:\Users\acc\AppData\Local\EBZ28334.tmp CLIENTUILEVEL = 3 MSICLIENTUSESEXTERNALUI = 1 CLIENTPROCESSID = 3776
  MSI (s) (AC:64) [12:40:21:619]: PROPERTY CHANGE: adding PackageCode property. Its value is '{824AA89B-CCCC-4D40-A6D3-71DF21FEE110} '.
  MSI (s) (AC:64) [12:40:21:619]: Product Code passed to Engine.Initialize: "
  MSI (s) (AC:64) [12:40:21:619]: the Product Code of the table of properties before transformations: "{F89B22BC-2768-4237-B300-5CFA52D9AC84}".
  MSI (s) (AC:64) [12:40:21:619]: the Product Code of the table of properties after transformations: "{F89B22BC-2768-4237-B300-5CFA52D9AC84}".
  MSI (s) (AC:64) [12:40:21:619]: unregistered product: first start installation
  MSI (s) (AC:64) [12:40:21:619]: product {F89B22BC-2768-4237-B300-5CFA52D9AC84} is not supported.
  MSI (s) (AC:64) [12:40:21:619]: MSI_LUA: invites of credentials not required, the user is an administrator
  MSI (s) (AC:64) [12:40:21:619]: PROPERTY CHANGE: adding ProductState property. Its value is '-1'. '.
  MSI (s) (AC:64) [12:40:21:619]: entering CMsiConfigurationManager::SetLastUsedSource.
  MSI (s) (AC:64) [12:40:21:634]: value 'SearchOrder' user policy is 'nmu '.
  MSI (s) (AC:64) [12:40:21:634]: adding new sources is allowed.
  MSI (s) (AC:64) [12:40:21:634]: PROPERTY CHANGE: adding PackagecodeChanging property. Its value is '1 '.
  MSI (s) (AC:64) [12:40:21:634]: Package name extracted from package path: 'SSO64.msi '.
  MSI (s) (AC:64) [12:40:21:634]: package be registered: "SSO64.msi."
  MSI (s) (AC:64) [12:40:21:634]: Note: 2 1: 2262: AdminProperties 3:-2147287038
  MSI (s) (AC:64) [12:40:21:634]: Machine policy value 'DisableMsi' is 1
  MSI (s) (AC:64) [12:40:21:634]: value of strategy Machine 'AlwaysInstallElevated' is 0
  MSI (s) (AC:64) [12:40:21:634]: "AlwaysInstallElevated" user policy value is 0
  MSI (s) (AC:64) [12:40:21:634]: product installation will be high because the user is admin, and the product is to be installed by computer.
  MSI (s) (AC:64) [12:40:21:634]: the product '{F89B22BC-2768-4237-B300-5CFA52D9AC84}' is running with elevated privileges: product is affected.
  MSI (s) (AC:64) [12:40:21:634]: PROPERTY CHANGE: adding ADDLOCAL property. Its value is "froot, server, Admin, SSOMMC, Pwdsync.
  MSI (s) (AC:64) [12:40:21:634]: PROPERTY CHANGE: adding INSTALLDIR property. Its value is "C:\Program Files\Common Files\Enterprise Single sign-dans\ '."
  MSI (s) (AC:64) [12:40:21:634]: PROPERTY CHANGE: adding CURRENTDIRECTORY property. Its value is 'C:\Users\acc\AppData\Local\EBZ28334.tmp '.
  MSI (s) (AC:64) [12:40:21:634]: PROPERTY CHANGE: adding CLIENTUILEVEL property. Its value is '3'.
  MSI (s) (AC:64) [12:40:21:634]: PROPERTY CHANGE: adding MSICLIENTUSESEXTERNALUI property. Its value is '1 '.
  MSI (s) (AC:64) [12:40:21:634]: PROPERTY CHANGE: adding CLIENTPROCESSID property. Its value is "3776".
  MSI (s) (AC:64) [12:40:21:634]: value of strategy Machine 'DisableAutomaticApplicationShutdown' is 0
  MSI (s) (AC:64) [12:40:21:634]: MANAGER of REBOOT: disabled by the property MSIRESTARTMANAGERCONTROL. Windows Installer uses the built-in functionality of FilesInUse.
  MSI (s) (AC:64) [12:40:21:634]: PROPERTY CHANGE: adding MsiSystemRebootPending property. Its value is '1 '.
  MSI (s) (AC:64) [12:40:21:634]: TRANSFORMS property is now:
  MSI (s) (AC:64) [12:40:21:634]: PROPERTY CHANGE: adding VersionDatabase property. Its value is "200".
  MSI (s) (AC:64) [12:40:21:634]: SHELL32::SHGetFolderPath returned: C:\Users\acc\AppData\Roaming
  MSI (s) (AC:64) [12:40:21:634]: SHELL32::SHGetFolderPath returned: C:\Users\acc\Favorites
  MSI (s) (AC:64) [12:40:21:634]: SHELL32::SHGetFolderPath returned: C:\Users\acc\AppData\Roaming\Microsoft\Windows\Network shortcuts
  MSI (s) (AC:64) [12:40:21:634]: SHELL32::SHGetFolderPath returned: C:\Users\acc\Documents
  MSI (s) (AC:64) [12:40:21:634]: SHELL32::SHGetFolderPath returned: C:\Users\acc\AppData\Roaming\Microsoft\Windows\Printer shortcuts
  MSI (s) (AC:64) [12:40:21:634]: SHELL32::SHGetFolderPath returned: C:\Users\acc\AppData\Roaming\Microsoft\Windows\Recent
  MSI (s) (AC:64) [12:40:21:634]: SHELL32::SHGetFolderPath returned: C:\Users\acc\AppData\Roaming\Microsoft\Windows\SendTo
  MSI (s) (AC:64) [12:40:21:634]: SHELL32::SHGetFolderPath returned: C:\Users\acc\AppData\Roaming\Microsoft\Windows\Templates
  MSI (s) (AC:64) [12:40:21:634]: SHELL32::SHGetFolderPath returned: C:\ProgramData
  MSI (s) (AC:64) [12:40:21:634]: SHELL32::SHGetFolderPath returned: C:\Users\acc\AppData\Local
  MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: C:\Users\acc\Pictures
  MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Administrative of Directors
  MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup
  MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start start\program
  MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu
  MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: C:\Users\Public\Desktop
  MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: Menu\Programs\Administrative C:\Users\acc\AppData\Roaming\Microsoft\Windows\Start of Directors
  MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: C:\Users\acc\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Startup
  MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: C:\Users\acc\AppData\Roaming\Microsoft\Windows\Start start\program
  MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: Menu C:\Users\acc\AppData\Roaming\Microsoft\Windows\Start
  MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: C:\Users\acc\Desktop
  MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Templates
  MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: C:\Windows\Fonts
  MSI (s) (AC:64) [12:40:21:650]: Note: 1: 2898 2: MS without Serif 3: MS without Serif 4: 0 05:16
  MSI (s) (AC:64) [12:40:21:650]: MSI_LUA: the MsiRunningElevated of the parameter property to 1 because the installation is already running high.
  MSI (s) (AC:64) [12:40:21:650]: PROPERTY CHANGE: adding MsiRunningElevated property. Its value is '1 '.
  MSI (s) (AC:64) [12:40:21:650]: PROPERTY CHANGE: adding privileged property. Its value is '1 '.
  MSI (s) (AC:64) [12:40:21:650]: Note: 1: 1402 2: HKEY_CURRENT_USER Software Microsoft MS Setup (ACME) \User Info 3:2
  MSI (s) (AC:64) [12:40:21:650]: PROPERTY CHANGE: adding USERNAME property. Its value is 'KPN '.
  MSI (s) (AC:64) [12:40:21:650]: Note: 1: 1402 2: HKEY_CURRENT_USER Software Microsoft MS Setup (ACME) \User Info 3:2
  MSI (s) (AC:64) [12:40:21:650]: PROPERTY CHANGE: adding COMPANYNAME property. Its value is 'KPN '.
  MSI (s) (AC:64) [12:40:21:650]: PROPERTY CHANGE: adding a DATABASE property. Its value is 'C:\Windows\Installer\1ebf5f91.msi '.
  MSI (s) (AC:64) [12:40:21:650]: PROPERTY CHANGE: adding OriginalDatabase property. Its value is "SSO x64\SSO64\SSO64.msi.

  ..............................

  ................................

  Property (S): GPTSupport = 1
  Property (S): OLEAdvtSupport = 1
  Property (S): ShellAdvtSupport = 1
  Property (S): MsiAMD64 = 6
  Property (S): Msix64 = 6
  Property (S): Intel = 6
  Property (S): PhysicalMemory = 3840
  Property (S): VirtualMemory = 4312
  Property (S): AdminUser = 1
  Property (S): MsiTrueAdminUser = 1
  Property (S): LogonUser = acc
  Property (S): UserSID = S-1-5-21-1305377269-4159824490-449157577-297538
  Property (S): UserLanguageID = 1033
  Property (S): ComputerName = W1613
  Property (S): SystemLanguageID = 1033
  Property (S): ScreenX = 1024
  Property (S): ScreenY = 768
  Property (S): CaptionHeight = 19
  Property (S): BorderTop = 1
  Property (S): BorderSide = 1
  Property (S): TextHeight = 16
  Property (S): TextInternalLeading = 3
  Property (S): ColorBits = 32
  Property (S): TTCSupport = 1
  Property (S): Time = 12:40:37
  Property (S): Date = 01/03/2012
  Property (S): MsiNetAssemblySupport = 2.0.50727.4927
  Property (S): MsiWin32AssemblySupport = 6.1.7600.16385
  Property (S): RedirectedDllSupport = 2
  Property (S): MsiRunningElevated = 1
  Property (S): The privilege = 1
  Property (S): Name of USER = KPN
  Property (S): COMPANYNAME = KPN
  Property (S): basis of DATA = C:\Windows\Installer\1ebf5f91.msi
  Property (S): OriginalDatabase = SSO x64\SSO64\SSO64.msi
  Property (S): UILevel = 2
  Property (S): MsiUISourceResOnly = 1
  Property (S): Preselected = 1
  Property (S): ACTION = INSTALL
  Property (S): AccountAuthenticatedUsers = authenticated users
  Property (S): AccountCreatorOwner = CREATOR OWNER
  Property (S): AccountPowerUsers = power users
  Property (S): AccountUsers = Users
  Property (S): ROOTDRIVE = D:\
  Property (S): CostingComplete = 1
  Property (S): OutOfDiskSpace = 0
  Property (S): OutOfNoRbDiskSpace = 0
  Property (S): PrimaryVolumeSpaceAvailable = 0
  Property (S): PrimaryVolumeSpaceRequired = 0
  Property (S): PrimaryVolumeSpaceRemaining = 0
  Property (S): INSTALLLEVEL = 1
  Property (S): Complus_XML_Data =

  Property (S): SOURCEDIR = SSO x64\SSO64\
  Property (S): SourcedirProduct = {F89B22BC-2768-4237-B300-5CFA52D9AC84}
  Property (S): ProductToBeRegistered = 1
  MSI (s) (AC:64) [12:40:37:260]: Note: 1: 1708
  MSI (s) (AC:64) [12:40:37:260]: product: Microsoft Enterprise Single Sign-On - the Installation operation failed.

  MSI (s) (AC:64) [12:40:37:275]: Windows Installer installed the product. Product name: Microsoft Enterprise Single Sign-On. Product version: 6.0.0245.0. Product language: 1033. Manufacturer: Microsoft Corporation. Installation success or error status: 1603.

  MSI (s) (AC:64) [12:40:37:275]: see clean files/packages, if there
  MSI (s) (AC:64) [12:40:37:275]: MainEngineThread returned 1603
  MSI (s) (C AC:3) [12:40:37:275]: sequence number number for this installation system restore.
  = Logging stopped: 01/03/2012 12:40:37 =.
  MSI (s) (C AC:3) [12:40:37:275]: strategy user 'DisableRollback' is 0
  MSI (s) (C AC:3) [12:40:37:275]: policy value 'DisableRollback' Machine is 0
  MSI (s) (C AC:3) [12:40:37:275]: meter is incremented to disable the stop. Counter after increment: 0
  MSI (s) (C AC:3) [12:40:37:275]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3:2
  MSI (s) (C AC:3) [12:40:37:275]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3:2
  MSI (s) (C AC:3) [12:40:37:275]: disable the stop against the decrement. If counter > = 0, will be denied the stop.  Counter after decrement:-1
  MSI (s) (C AC:3) [12:40:37:275]: restoration of the environment variables
  MSI (s) (C AC:3) [12:40:37:275]: object to destroy RemoteAPI.
  MSI (s) (C AC:3) [12:40:37:275]: end of thread Custom Action Manager.
  MSI (c) (C0:58) [12:40:37:275]: disable the stop against the decrement. If counter > = 0, will be denied the stop.  Counter after decrement:-1
  MSI (c) (C0:58) [12:40:37:275]: MainEngineThread returned 1603
  = Recording stopped: 01/03/2012 12:40:37 =.

  Hello Philippe Gupta.

  Since the question you posted is on a Windows Server 2008-based computer, the question would be better suited on the TechNet support forum. Then I suggest you to post the question on the following link.

  http://social.technet.Microsoft.com/forums/en-us/newThread

• Internal Error 2908 {182C2188-3F15-CE6C-1FC2-23A0CB4637D1} during the installation of a program

  Hi all

  I need help please. I get 3 errors when you try to install a program and I will include all of the below 3. Please help me get rid of this headache. Thank you.

  This is the first...

  Internal Error 2908. {837EE547-6D3B-7124-817B-A0DDC38CDA99}

  When I select OK I then get this one

  Internal Error 2908. {182C2188-3F15-CE6C-1FC2-23A0CB4637D1}

  If I hit OK once again I get a different error...

  Error 1935. "An error occurred during the installation of assembly ' vdFramedControl, Version ="6.1.60117.0", Culture ="nuetral", PublicKeyToken ="54EAC14E23C9EE53", ProcessorArchitecture = x 86." Please see Help and support for more information. HRESULT: 0X8002802F.

  It drives me crazy and I don't know what to do. Thanks in advance for any help that you could provide.

  Hi KelMil,

  1 Windows operating system you are using?

  2. what software are you trying to install?

  Method 1:

  You can consult the following thread link and try the steps Diana D December 1, 2010 and check if it helps.

  Error 1935.An error occurred during the installation of assembly ' Microsoft.VC80.ATL,.

  Method 2:

  You can also try to give permission for the two above mentioned registry keys. Check for multiple entries, registry keys, and give permission to all keys.

  a. click Start, type regedit in the search box and press on ENTER.

  b. click on edit and select find and type the copy and paste the registry key: {837EE547-6D3B-7124-817B-A0DDC38CDA99} and click Next.

  c. right-click on the key component and select permission.

  d. click Add, type everyone and click ok.

  e. Select group or the user name one by one and check the complete control of the area for all.

  f. click apply, click Ok.

  g. check for multiple entries for the key. If one is present, then repeat the steps above to give perimmision to all keys.

  Note: You must give permission to the {182C2188-3F15-CE6C-1FC2-23A0CB4637D1} key by following the steps mentioned above.

  h. restart the computer and check.

  Important: The above mentioned steps show you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, follow the steps from the link below:

  Back up the registry

• An error occurred during the installation of microsoft install (MSI)

  Original title: an error occurred during the installation of microsoft install "during the installation of the Simulator professional siemens step 7.

  at the beginning of the installation process of professional Simulator of Siemens step 7 it told me to install MS for the installer; After agreeing to install it I have faced this problem as shown in the link

  http://Desmond.imageshack.us/Himg689/scaled.php?server=689&filename=13910106.jpg&RES=landing

  Hey Sheriff,

  -The program-specific question is?

  I would suggest trying the following steps and check if it helps.

  Method 1: Check if the Windows Installer Service is present and running on your computer.

  a. click Start , click RUN.

  b. in the run line, typeservices.msc and press to enter.

  c. find the Windows Installer Service.

  d. right-click on it and click on Properties.

  e. set Startup type to Automatic , and then Start the service.

  Try to install the software once again and check.   If the Windows Service install is not present or it cannot be started, then follow method 2.

  Method 2: Follow the steps in the Microsoft Article virtue and check following.

  "Windows Installer service could not be accessed" error when you try to add or remove a program in Windows XP or Windows Server 2003 http://support.Microsoft.com/kb/315346  

  For reference:

  Error message "the Windows Installer service is not be available" when you try to install Office

  http://support.Microsoft.com/kb/324516

  Let us know the results.

• During the installation and activation of google chrome, I lost my taskbar

  Original title: Google Chrome

  during the installation and activation of google chrome, I lost my taskbar. How can I reinstall my taskbar?

  Hi Frank,.

  1. do you receive any error messages?

  2. have you restarted the computer once installed google chrome?

  3. not this problem occurs when you run a specific program or out of order?

  This problem can occur for the following reasons:

  • Auto-hide the taskbar has been selected for the taskbar and Start Menu Properties.
  • Your user account settings are corrupt.

  Method 1: Make sure that the hide option automatically is not selected for the taskbar

  To determine if the hide option automatically is not enabled for the taskbar and Start Menu properties, follow these steps:

  a. press CTRL + ESC.

  b. If the Start menu is displayed, click on the Start menu and then click Properties.

  c. click on the task bar , clear the Auto-hide the taskbar option and then click OK.

  If the problem persists, you can proceed to method 2.

  2 method: Recycle Explorer.exe

  Try to recycle Explorer.exe by opening the Task Manager (you can use Ctrl + Shift + Esc), selecting explorer.exe in the list and choosing end process.

  Now go to the file menu, choose new task and type in Explorer in the Open box. Press on enter and explore should restart itself.

  Check whether the taskbar is visible now.

  Hope this information helps. Provide more information so that we can help you.

• Receive error message "cannot find volume of extraction" during the installation of products of microcoft"

  When I download... NET or windows install it downloads fine but when I click Run to install I get "cannot find volume of extraction" make sure you have the right permission. This does.nt occur on all facilities but it is in the Sub microsoft windows update installs and direct installs the Center.ce to download just started a few weeks ago and I tried everything in my power to correct without result.

  * original title - what is and solution to "cannot find volume of extraction" during the installation of products of microcoft? *

  Hi howardchampion,

  Please see the thread with a similar problem and fix possible:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_install/i-am-trying-to-install-Microsoft-Silverlight-and/920f7b7a-E926-47B5-acc4-e8dfbc548696

  I hope this helps!

• "The expected Version of the product is not found on the system" error message during the Installation of Service Pack 3

  During the installation of Microsoft Service Pack 3, I get the message "The expected Version of the product is not found on the system."

  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717

  How to troubleshoot an installation fails on Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950718

  How to obtain the latest Windows XP service pack
  http://support.Microsoft.com/kb/322389

  Downloads of SP3: -.

  Windows XP Service Pack 3 - file to Image CD ISO-9660:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=2FCDE6CE-B5FB-4488-8C50-FE22559D164E&displaylang=en

  Windows XP Service Pack 3 for developers network installation Package and the professionals (unique facilities for the PC can use the same file)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5B33B5A8-5E76-401F-BE08-1E1555D4F3D4&displaylang=en

  How do you know if you are running a 32 bit / X 86 or 64-bit computer

  1. Click Start.

  2. Do right click my computer and then click Properties.

     • If you don't see "x 64 Edition" in the list, then you are running 32-bit Windows XP.

     • If "x 64 Edition" is listed under system, you are running the 64 bit version of Windows XP.

• Cannot install this hardware. An error occurred during the installation of the device

  Can someone please HELP ME - I get the following error message: cannot install this hardware. An error occurred during the installation of the device. They system cannot find the specified file.

  I am not able to connect any hardware. It started all of a sudden. I can't connect my mouse so it before I'm not able to use my computer.  He did the same thing when I put in a USB key, there was the same error message.

  If something is damaged? How can I resolve this - pleaseeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee.

  Looks like you may have a virus or other malware. Get your updated antivirus program and start safe mode.  Note that some viruses can hide from your normal antivirus program, so you really need to scan mode without failure.  To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode.  Then run a complete system scan.
  Microsoft has suggestions and offerings to
  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus
  Moderator Forum Keith has a few suggestions along this line to
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3
  If that suits him fine. If this is not the case, use system restore to go back to an earlier date at the beginning of the problem.  To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore.  Click on the box that says show more restore points.
  You can check the corrupted system files.  Open an administrator command prompt and run SFC if the above does not help. Click START, and then type sfc in the search box, right-click to SFC. EXE, then click on run as administrator. Then from the command prompt, type sfc/scannow.
  Finally if all else fails, you can look at the rather cryptic system event log.  To make, click Start-> Control Panel-> administration-> event viewer tools.  Once in Event Viewer system log-click and scroll entries looking for these "error" with indicator see if you can find guidance on where the problem may be.
   
  I hope this helps.  Good luck.

• I am trying to install windows xp from the disk, but it hangs during the installation process. no error code. It just hangs. What is the cause and what is the solution?

  I am trying to install windows xp from the disk, but it hangs during the installation process. no error code. It just hangs. What is the cause and what is the solution?

  Hello

  1. at what stage of the installation, the computer crashes?

  2. what operating system was installed on your computer prior to this?

  If you have the similar problem as mentioned in these links, you can follow these links and check if the problem persists:

  Windows XP Setup stops responding (hangs) during the "Preparing Installation" phase

  Windows XP does not meet the Message "Setup starts Windows XP"

  Hope the helps of information.