problem Audio ban X200t with Windows 7

Similar Questions

• problems of xbox 360 with windows xp sp3 wireless receiver

  problems of xbox 360 with windows xp sp3 wireless receiver

  Hi Frank Lucas.

  (1) if it works well before?

  (2) remember to make changes?

  (3) you get an error message?

  You can see the steps outlined in the article below

  Troubleshooting your Xbox 360 Controller for Windows

  http://support.Microsoft.com/kb/908888

  You can also post your query on Xbox Forum

  http://forums.Xbox.com/

• Problems of simple pass with Windows 8.1

  I just bought a HP ENVY TouchSmart m7-j010dx Notebook PC running Windows 8.0 about 5 days ago. I was able to configure Simple Pass, scan and add numbers and associated passwords. Then I upgraded to Windows 8.1. Now, I am unable to open SimplePass, add extra finger scans, or change the settings since the last update to Windows 8.1.

  I tried to re - install the program as a function of repair. It works by welcoming and accepting a fingerprint at the opening. When I click on the program in my Start menu as it begins to open, load databases, then disappears.

  I then uninstalled Pass Simple and re-installed after you download it again from HP at this link:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-122818-1 & CC = US & DLC = in & LC = in...

  During the installation, there was a message needed me true API (x 64), which found the program installation and re-installed and then installed http://ftp.hp.com/pub/softpaq/sp63001-63500/sp63224.exe

  After you have reinstalled successfully Simple version 6.0.100.276, I rebooted my computer. However, the program is still not fully functional. I still can't open SimplePass, add extra finger scans, or change the settings. I am able to connect to Windows with a fingerprint, but he didn't ask me for analyses when I connect to different web sites.

  I'd appreciate the help. Thank you.

  See you soon,.

  Ectophile

  This message is for everyone who has problems SimplePass with Windows 8.1.

  Christopher of Jeff, executive relationship at the Head Office of Hewlett - Packard Company contacted me personally after I had tried for 5 five months get HP to fix this. I submitted to a team climbs HP Case Manager, who offered me the following options:

  # 01 Fix my computer free of charge. This shipment of the machine to them and the possability that I could lose data if they need to restore the operating system. I would be also without the computer.

  # 02 Give me a free 3 year warranty extension on my current computer which includes a home service on some components, but not the motherboard and cover against accidental damage.

  # 03 Give me an equivalent model new HP laptop computer with extended warranty of 3 years including in-home services and coverage against accidental damage. For this, restoring them my old computer AFTER transfer of programs and data to the new machine files. It was suggested that I go to the HP online store and browse the available templates. They also indicated that they would be willing to make minor improvements if my exact specifications are no longer available.

  I am sure that these same choices could and should be available to ANYONE who also had these same problems very frustrating and annoying. After all, we all paid an additional amount for software and SimplePass fingerprint scanning equipment and are entitled to expect that it works with all versions of Windows 8.

  If, as I have, you have also made several attempts to get this problem resolved by HP, Best Buy, Microsoft, or any other third party, without success, try to contact Jeff Christopher directly at [email protected].

  I hope that this could finally solve this problem, and everyone gets the same fair and equal treatment that was offered to me.

  I must also congratulate HP to finally take a step upward, appropriating and goes the extra mile to resolve this problem. Accordingly, my view of HP and my loyalty to them, increased considerably.

  See you soon,.

  Joel

• Problem of Bluetooth device with windows 7 ultimate 32 bit (AND NOT the PHONE NOKIA)

  Hi, I have a compaq presario THAT CQ 61 pre-installed with windows vista home premium. I add a bluetooth headphone iluV i212 & worked with windows vista. When I installed windows 7 for the first time, he also worked but when I reinstalled windows 7 ultimate, yet, it does not & windows needs drivers for this helmet. So please provide me with the latest driver bluetooth for my laptop in order to solve this problem. Thank you

  You can install this driver and check... ftp://ftp.HP.com/pub/SoftPaq/sp43501-44000/sp43930.exe

• Problems of Internet connection with Windows CE 6.0

  original title: frustrated

  I have a netbook with windows ce 6.0 and I tried each troubleshooting method that could think about my internet provider which is clear. The problem is when I'm at work I can use wifi there without any problem, but at home I can't all internet so the end result is clear wireless telling me that they do not support windows this. I know I'm not the only one with windows this or the one trying to get on the internet.

  Hello

  ·          You use a router to connect to the internet?

  ·          If Yes, have you tried if internet connection work when it is connected through an Ethernet cable?

  Question suits you best in the MSDN forums.

  http://social.msdn.Microsoft.com/forums/en/category/EmbeddedWindows

  Diana

  Microsoft Answers Support Engineer

• driver problem audio 2310er HP dv3 (windows 7 32 bit)

  There is no sound after you install IDT Audio Driver, which was downloaded from the Support page of HP & drivers for my laptop and operating system, but the mute switch still works (turning red when cut and white otherwise).

  Sound works well with drivers of high-definition audio by default in windows, but in this case the 'secret' button changes color.

  PS sorry for my English =)

  Hello

  If you have used this driver on the right?

  If this is not the case, uninstall your current driver and install what I posted above.

  Reach:

  Panel-> Manager devices-> Audio, video and game controllers

  Click with the right button of your mouse on your IDT audio card it and choose Properties. Then, go to the ' Details ' tab and paste hardware ID here. This way we will know what it is.

  Below, an example of how you do it:

  
  
  

• Split HP 13 x 2: Audio/video issues with Windows 10

  I'll start by saying that before the Windows 10 update, everything works perfectly.  After the update, I tried to watch a video on youtube and found that the video would not play properly, it would freeze and jump back more and more, and the sound was essentially just a humming noise.

  Since the problem started I tried to reset the PC, reinstall all the drivers I think (I had to do anyway after resetting the PC because there is no sound afterwards) and generally tinker with settings as far as I can find.  I discovered that this problem only occurs with microsoft browsers, doesn't happen in chrome or firefox, and the same audio problem is present with Candy Crush.  I should also say that he has no problem playing music, Pandora works great.

  Audio and video work perfectly well if I run a bluetooth speaker, but through the computer speakers or headphones, and it starts buzzing and start/stop.  Yesterday, I found that when I took off the passage of the tablet to the computer (it's a 2 in 1) audio began to work very well.  Thinking it was a problem with additional hard drive in the keyboard, I unchecked the option to activate the disc for the drive cache, allowing to solve the problem temporarily until I rebooted the computer, and now he is back not working not not and is no longer works in the mode of just Tablet even after the passage of the disk caching on for additional drive which makes very little sense to me.

  At this point, I'm completely confused.  All updates have been downloaded and applied of HP and Microsoft, I can find.  I hope someone has an answer! Thank you.

  Oddly enough, the following solution does not work a few weeks ago, but now, at least for me. Solved my problems of video playback as well.

  https://www.YouTube.com/watch?v=jWoIYi1LTPA

• How can I get audio to work with Windows 7?

  I just reinstalled by copy of first 4 Elements in a new machine running Windows 7. There is no sound when I play the old avi with sound files or if I capture new video with sound. How can I fix?

  Running Windows 7 64 bit in mode 32-bit will probably not solve the problem. Windows 7 automatically slides when even in 32-bit compatibility mode when you run 32-bit programs. The biggest problem is that if your 64-bit audio drivers are compatible with the program.

  Then all first, make sure you have the latest audio drivers. If your computer uses the RealTek drivers, visit the RealTek website and get the latest series of pilot hi-def audio.

  When this is done, we will focus only on the DV - AVI captured from your miniDV via FireWire. Your other reviews may have other issues. You say you can play them in Media Player and they sound but in Premiere Elements they do not?

  If Yes, go to the first Edition items menu and select Preferences / Audio material. Click ASIO settings button and then make sure that the ASIO settings are correct for your speaker configuration.

• External Toshiba HDD problem. Something wrong with Windows I think.

  Toshiba ALU 3.5 "1.5 TB external HARD drive problem
  Hello!

  I'm having a problem with a new external HARD drive, I bought a couple of months.

  The HARD drive is recognized by Windows XP as a disk 3,5 '' HARD, but then he invites for drivers and never.
  They say drivers should be on the HARD drive itself, but my computer does not access the drive and never
  He attributes a letter or anything like that.

  The disc works on all the other computers I've tried with. My computer is since 2006, so maybe
  It is an age problem. I do not know.

  I drive came as FAT32 and I tried to format it in NTFS, but it does not work.

  I have completely updated the DELL drivers (bios, chipset, etc) and Microsoft (SP3/etc), then it cannot be a problem of drivers, it can?

  MORE DETAILS:

  Hey guys, it seems that the problem is more complicated. Here are two other discoveries that later, I did:

  I accidentally uninstalled a USB root hub, and all of my usb devices stopped working. I had to read on how to re - install, and most of the people, said that Windows should do it by itself. There can be no. So the next thing I did was uninstall all the USB controllers, on the assumption that Windows XP should reinstall automatically thereafter. Windows did not have this too!

  Although Windows has detected something, it does not recognize as a controller and have not installed the drivers for them. I had to manually tell Windows to look in C:/windows\system32\drivers and C:/Windows/c:\windows\servicepackfiles/i386 to each controller. It was tiring.

  I finally reinstalled all my usb controllers and my webcam works well again. But has not fixed the problem HARD drive.

  This is related somehow the problem of HARD drive, because I plugged my hard drive to a friend's computer and tried to put my computer on a USB key. Guess what, the USB is noticed by windows, but not recognized or installed in 'my computer '. The same story!

  I must tell you that in early December, I removed an old Go 700 Siemens drive of my system without "Safely uninstall" and it crashed HARD drive. Now, I realize that this accident probably missed my copy of windows, or my computer. I'm not sure of that... ?

  I believe that all these problems are related. It seems centered on the ability of Windows to detect large storage via USB devices. My webcam, for example, works very well.

  Well, I'm always working hard to solve this problem, but if you have any ideas, please let me know!

  All the best,
  M.

  It seems that you have already started the discussion on the same issue in another thread:
  http://forums.computers.Toshiba-Europe.com/forums//message.jspa?MessageID=198714

  Please don t create several threads on the same topic and follow the first thread to avoid misunderstandings!

• Printing problem on deskjet 4510 with windows 8.1

  I bought a new deskjet 4510 and have installed via usb on my desktop running windows 8.1. This isn't the impression through products of ms office word, excel etc. and either through wordpad. I can print Notepad files and pdf via adobe reader software.

  I tried HP print and scan doctor who did not find any problem with the printer and print a test page.

  I tried uninstalling and reinstalling, setting the printer wireless to the top but could not do print.

  I looked at the help on this forum and also tried selective installation, disabling all services except when starting microsoft services, but the problem remains.

  Help, please.

  Hey @rshri7869.

  Welcome to the Forums of HP Support!
  
  I understand that you meet your HP Deskjet printing problems in advantage 4510 series e-all-in-one printer to your computer Windows 8.1. You have included a large number of useful information in your post, so thank you. After reviewing the troubleshooting you have already finished, I came to the conclusion that what you feel is a conflict of driver on your computer Windows 8.1. To fix this please follow the steps below.

  How to add another driver:

  1. Open the Start screen (by selecting the windows start button in the lower left corner or by selecting the "Windows" button at the bottom left of your keyboard to the left of the 'Ctrl' key
  2. In the start screen, type "Devices and printers"
  3. If the option devices and printers automatically fills, click settings at the top right and then click on devices and printers.
  4. In the devices and printers folder right click on your series Deskjet 4510 and left click on printer properties
  5. Left click on the Advanced tab
  6. Left-click on new driver
  7. When the new window driver opens just hit 'next' until you see a list of manufacturers on the left and a list of printers on the right.
  8. Select HP as the manufacturer on the left
  9. DeskJet 9800 select the printer on the right. If Deskjet 9800 is only select "Windows Update" at the bottom left and once the update has been completed, you will be able to select Deskjet 9800.
  10. After selecting Deskjet 9800 hit next complete the new driver Wizard
  11. Under the printer properties window, select 'Apply' but do not hit OK
  12. Select the general tab
  13. Rename your printer in HP Deskjet 4510
  14. Click OK
  15. Finally, right-click on your Deskjet 4510 series once more and click on Printing Preferences
  16. Left click on the paper/quality tab
  17. Left click on the dropdown 'Normal' for the print quality down to the right and change its normal fast
  18. Press apply and OK
  19. Try to print!

  Please let me know if the steps I have provided to resolve your problem. Good luck!

• security problems of online game with windows 7

  I haw problem with online games for a long time since I have windows 7 64 bit

  Perfect World internatyional recognize only 1 GB RAM 6 GB. Tried compability mode tried to run it as administrator nothing worked :(

  What could be the reason for this?

  Hello Rudions,

  Thank you for visiting the Microsoft answers community.

  There are a few things that could cause the problem you are experiencing.

  Compatibility, network, video are the areas that must be addressed. On the website of Perfect World Entertainment, I was able to locate troubleshooting for their games for each of these areas, as well as the simple troubleshooting steps for their games successfully under Windows 7. Please visit their website for more information on all these areas. Then go to the Technical Support on the left navigation pane.

  Hope this helps

  Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problem running Battlestations Pacific with Windows 7 Home Premium

  I just buy Battlestations Pacific and tried to load it on my laptop ASUS G72GX under Windows 7 Home Premium.  The game seems to load correctly, the shortcut will appear in the Games folder; However, when he tries to run the screen goes black, the cursor shows that the program is "pending" then I get spilled on the desk with a message that the program has stopped running and the computer will try now Windows to solve the problem, after a minute or so, I get a message that there is currently no solution and the program is to be arrested.  I uninstalled and reinstalled the program, I tried to use troubleshooting compatibility to run it under Vista and XP (Service Pack 2) mode and it does not work.  I have loaded the game on my sons office that works under XP (Service Pack 2) and it loaded and ran without any problems.

  Hi Hank53,

  Welcome to Microsoft Answers Community Forums.

  Your game software is not listed in the Compatibility Center Windows 7 you can find here. Please see this link here for frequently asked Questions and measures to address if the product you are looking for is not.

  Please check with the software vendor for technical support regarding the program running on Windows 7, here is the link for the help - http://support.eidosinteractive.com/

  Alternatively, you can try to lower the resolution of the game screen to support your monitor display settings and increase hardware acceleration in Windows 7 to check if it solves your problem.

  To increase the acceleration hardware under Windows 7, please see the steps below.

  1. Click Start-> Control Panel-> appearance and personalization.

  2. under customization, click on adjust the screen resolution.

  3. in the display settings dialog box, click the Advanced Settings button.

  4. in the monitor Properties dialog box, click the Troubleshooting tab.

  5. click on the change settings button.

  6. in the Security dialog box, click on continue.

  7. move the hardware acceleration slider to up to the increase of hardware acceleration.

  8. click on OK.

  9. restart Windows.

  Help hope this information.

  Kind regards

  Arona - Microsoft technical support engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Rise of the problem of the nations with windows 7

  I want to play my favorite game, but because I changed my windows from XP to Windows 7 I can not play... I read read and read a lot of topics how to run... nothing helped me not... all the time I try to start the game it shows me this:

  http://img218.imageshack.us/f/asdgx.PNG/

  Can U help me?

  If you do not see the picture telling me to transfer it to another site. And I ask again once... can someone help me?

• problem installing SQL server with windows vista

  SQL server system configuration checker cannot be executed due to wmi configuration error:2147749907(0x80041013)

  I get this error when trying to install sql express 2005 on windows vista home and professional. Please let me know what is the cause of this error and the solution.very urgent please. Thanks in advance

  Hello Sisi reddi, welcome.

  You can try a solution that worked before on S2k3.  Try this on affected systems:

  1. click on START
  2 type "notepad" (without the quotes) and press enter
  3 copy and paste the following text in Notepad:

  LETTER
  CD %windir%\system32\wbem
  Mofcomp.exe cimwin32.mof
  Regsvr32 /s wbemupgd.dll
  Regsvr32 /s wbemsvc.dll
  Wmiprvse/regserver

  4. click on file > save as
  5. change the drop-down list (file type) to "all files".
  6. name the file sqlfix.bat, and then save it to your desktop
  7. from there, right-click on the file and choose "Run as Administrator". If it works that way, you can also open it WITHOUT choosing run as administrator and see what happens.

  8. now try to install SQL 2 k 5

  Let us know,

  Thank you!

• Does anyone have problems using Dreamweaver CS5 with Windows 7?

  I just started using Dreamweaver and thought I could import the source code of a HTML newsletter template I had and just update with the new text and images. I started a new HTML page, any source code in the workspace, and then began to be updated. However, all I get is code when I try to get a preview of the file in the design view or a web browser. What I am doing wrong? I have attached a CAP to screen what I see.

  Thanks to anyone who can help!

  I have started a new HTML page, imported the source code in the workspace

  You stick it in Design view?  Show us the first 10 lines of code in Code view, please.