Xerox Phaser 3150 Printer Laser

Similar Questions

• Fuji Xerox Phaser 3121 Printer Laser

  My Fuji Xerox Phaser 3121 Laser printer does not work with win7 64 bit.

  Device Manager indicates that the device drivers are not installed and no
  drivers are provided by xerox for win7 in compatibility with microsoft
  the article clearly says that the device is compatible and no additional software
  is required for the mentioned printer http://www.microsoft.com/windows/compatibility/windows-7/en-us/Details.aspx?type=Hardware&p=Fuji%20Xerox%20Phaser%203121%20Laser%20Printer&v=Fuji%20Xerox&uid=&pf=14&pi=7&c=Printers%20%26%20Scanners&sc=Laser%20Printers&os=32-bit
  which is not true in my case. What should I do?

  Hello

  You can use the Xerox Phaser 3124 driver which is compatible with the Phaser 3121.

  It is also provided by Win 7 that no additional software is necessary

  Your

  Ahmed

  MCTS, MCSA, MCP

• one by the xerox phaser 7300 printer will work with El captain

  One by the xerox phaser 7300 printer to become compatible with the captain.  Xerox shows no current drivers available?

  I think that the support dropped for Phaser 7300 Xerox about 10.6.8. If the generic postscript driver is not good enough for you consider trying the Gutenprint drivers:

  http://GIMP-print.sourceforge.NET/MacOSX.php

  I don't have access to a Phaser 7300 so I can't comment on the way in which these solutions work, but IME, Gutenprint drivers are usually pretty good.

  C.

• I am running Windows 7 Home premium but not able to install my Xerox Phaser 3117 printer due to the unavailability of the appropriate driver

  I'm on Windows 7 Home premium, but could not install my Xerox Phaser 3117 printer due to the unavailability of suitable to my lenovo driver all in a desktop pc. Help, please.

  Sandip Mitra.

  There are drivers Windows 7 here:

  http://www.support.xerox.com/support/phaser-3117/downloads/enza.html?operatingSystem=win7x64&fileLanguage=en_GB .

  Make sure that get you drivers 32 or 64-bit according to your version of the Windows.

  * To see if you're running 32-bit or 64-Bit Windows click:

  Start-> Control Panel-> system

  Then look at where it says, "System Type".

• Xerox phaser 6250dp will print not real PC

  I recently had to reinstall my Xerox Phaser 6250DP printer.  Since then I have printer is not printing from my computer and print only the Xerox from the printer menu.  What else should I do to fix this?  Thank you.

  Hello

  1 have had any changes made to your computer before this problem?

  2. what operating system do you use?

  3 - is a network printer or a local printer.

  4. what happens when you try to print?

  I suggest you try the methods mentioned below and check if it helps:

  Method 1:

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

   

  Method 2:

  Install a printer

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  I suggest you go to the Xerox support page for your printer

  http://www.Office.Xerox.com/printers/color-printers/Phaser-6250/SPRT-enus.html and download everything you need for your printer and your version of Vista.  Then read the articles about how install and configure the printer (unlike many other devices, printers are not intuitive and are picky about the way in which they are installed and will not work if not done according to the instructions).

  Hope this information is useful.

• Como instalo xerox phaser 3116 windows 7 x 64 en una

  Hola quien me can help I need instalar una xerox phaser 3116 en una Máquina con windows 7 x 64 y no hacerlo desde is black the pagina del manufacturer no hay don't para esta version esta Máquina windows disks. AYUDAAAAAAAAAAAAAAAA! Gracias

  This forum is English only.  The forum you want is the forum 'Hardware and drivers' Spanish Windows 7 available here: http://answers.microsoft.com/es-es/windows/forum/windows_7-hardware.

  The personal Laser Fuji Xerox Phaser 3116 printer is WIndows 7 64 bit compatible.   See http://www.microsoft.com/windows/compatibility/windows-7/en-us/Details.aspx?type=Hardware&p=Fuji%20Xerox%20Phaser%203116%20Laser%20Printer&v=Fuji%20Xerox&uid=&l=en-US&pf=0&pi=0&s=phaser%203116&os=64-bit.  In other words, it will install and works without any additional software driver.  Windows 7 contains a driver for it.

• the printer Xerox Phaser 3010 every time I do a draw it prints no and it show that the printer is paused

  help - please I have the xerox Phaser printer 3010 whenever I do a draw it does not print and it shows that the printer is paused it happened he was working? I tried to cancel and restart, troubleshooting, but nothing worked it keep suspended how change that? Help, please!

  Hello

  1. have there been recent changes to the computer before the show?

  2. the problem occurs when printing on all applications?

  I suggest to follow the steps provided and check if it helps.

  Method 1:

  Problems printing and printing errors.

  http://support.Microsoft.com/mats/printing_problems/en-us?EntryPoint=lightbox

  Method 2: Printer in Windows problems.

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Hope this information is useful.

• Windows 7 is not recognizing the printer driver Xerox Phaser 8560MFP

  I tried to install a printer driver for the printer Xerox Phase 8560MFP network on a computer using Windows 7 64 bit professional.  I downloaded the correct driver according to Xerox - a X-GPD_PS_x64Driver.  After selecting the right printer on the network and find the driver has been installed on my hard drive, however, Windows indicates that the driver is not found.  Xerox said that this may be a problem with Microsoft.  Y at - it bugs that I need to know or you have a suggestion on how I can fix this?
  

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Try to download the drivers from the website below

  http://www.support.Xerox.com/support/Phaser-8560MFP/downloads/enus.html?OperatingSystem=Win7x64&fileLanguage=en

  Chyeck the link on how to install the printer network below

  http://download.support.Xerox.com/pub/docs/8510MFP/userdocs/any-OS/en/user_guide_en.PDF

• Xerox Phaser 6300 toner cartridge failure

  Xerox Phaser 6300 toner cartridge - cyan toner cartridge failure (almost nine toner).  Printer turned, fired cartridge, cartridge put back in & locked & printer turned on - still had the cyan cartridge failure.  Put in another cartridge cyan who works well - no problems.  It was yesterday.

  Today - released the right cartridge cyan - turned printer printer unplugged waited 10 minutes - put off by "has no cartridge' yesterday - connected to the printer, switched back & still had failure of the cyan cartridge.  Put in the right cartridge & everything is fine.
  Compare the two cartridges - they both have exactly the same.
  Any suggestions?  Thank you!

  Contact Xerox support.

• problems with Xerox Phaser 3124 in window XP system

  Hi, I use Xerox Phaser 3124, but recently it suddenly does not work on my Windows XP and I could not print at all. I tried reinstalling the driver, but to no avail. the system do not allow the installation of the driver. I also tried to restore to an earlier date, but strangely the system do not allow me to restore also. can someone help me on this issue. Thank you.

  Hello

  · What is the error message that you receive when you try to print?

  · Were there any changes made on the computer before the show?

  Try the steps from the link: printer in Windows problems: http://windows.microsoft.com/en-us/windows/help/printer-problems-in-windows

• Xerox Phaser 3110 driver for windows 7

  Please I need a driver for printer Xerox Phaser 3110 Driver under Windows 7 x 64.

  I only in Windows XP

  Hello

  Unfortunately, Xerox Phaser 3110 driver for Windows 7 is not available, but you can download the driver from the link for Windows XP and installing the driver in compatibility mode, and check if the problem persists:

  http://www.support.Xerox.com/support/Phaser-3110/downloads/eneg.html?OperatingSystem=WinXP&fileLanguage=en_GB

  If the problem persists, contact Xerox Phaser 3110 manufacturer for assistance:

  http://www.Xerox.com/about-Xerox/contact-us/eneg.html

• Xerox phaser 7800

  I have a Xerox phaser 7800 DX with the additional bins etc., fantastic printer but I am wondering do I need a RIP for best results or can I print directly from CC of Illustrator and Photoshop cc?

  Thank you very much for any comments received in advance.

  Dan

  I print mine without an external RIP...

• 7520 new stuck in the installation phase. Print head move load ink cartridges

  I'm stuck in the new phase of printer configuration. After running through the commissioning of questions and I opened the cover to charge the ink cartridges and the print head did not move. I ran across several reset process... Unplug the printer. Wait 60 seconds and plug it in again. Browse the configuration... Unplug the printer... more.

  This printer does not seem to be any cartriages.

  Hey JohnTT,

  Sometimes, these printers come with packaging that holds the printhead completely to the right at the gas station.  This avoids damage to the product during shipping.  You see all plastic parts orange that it may contain in place or Blue Ribbon?

  So, have you tried the carriage to the right hand?  Can it be moved or is it blocked?

  If the printer still will not release the print carriage after the power cycles and move it by hand, then I suggest you return the product and return to the retailer of purchase or by calling the HP Technical Support to see about a replacement.  The phone number for the USA / Canada residents is 1-800-474-6836.  If you are not in this region, click here.

  I hope this helps.

• Drivers for HP P1005 printer laser window 8 64-bit

  The pilots were suppose to be at the end of 2012. Help, please. HP P1005 printer laser window 8 64-bit.

  Hello

  Have you tried to use the 64 bit Windows 7 software?  This should work for your printer under 64-bit Windows 8.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063 & LC = on & CC = US & DLC = in & sw_lang = & Product = 3435676

  I am an employee of HP.

• When I open a program on my laptop, a window appears which says Xerox phaser.

  When I open a program on my laptop computer, a window pops up that says Xerox phaser... .of know what it means, and I tried to fix it but I'm at a stop point... pointers?

  and all the icons changed

  original title: what is Xerox phaser?

  Hello

  What is the brand and model of the computer?

  Method 1:
  You can try to boot into safe mode with network and try to run a Microsoft sacfety scanner.
  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode
  Run a Microsoft security scanner to make sure that the computer is free from virus infection:
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  WARNING:
  If you run the antivirus program that is infected by the virus scan will get deleted. Therefore, reinstall the program. Also, if files and folders are affected by the virus, while they might even get deleted.

  Method 2:
  You can try to start in safe mode and perform a disk check.
  Safe mode:
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
  Select safe mode with command prompt.

  In the command prompt window, type the following command and press enter Chkdsk /R and Chkdsk /F

  Method 3:
  If the steps above does not help you then I suggest you to contact the manufacturer OEM (OEM) for the Windows Vista installation disc to run the utility chkdsk from the recovery Windows (WINRE) environment and check if that helps you solve the problem.

  Follow the steps below to start the computer using the WINRE and run the chkdsk utility.
  a. Insert the Windows Vista installation disc.
  b. restart your computer.
  c. If prompted, press any key to start Windows from the installation disc.
  Note: If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings. For more information, see BIOS: frequently asked questions.
  d. choose your language settings, and then click Next.
  e. click on repair your computer.
  f. Select the operating system you want to repair, and then click Next.
  g. on the System Recovery Options menu, select command prompt.

  h. type the command chkdsk C: /f /r and press enter