XFDF file is not created in the C drive of the system.

Similar Questions

• File are not accessible by the system

  There is, I had restored my computer using suite recovery of my computer.  I backup all before starting the process.  After when the process was done and I had everybody works very well, I went to remove my files of backup for the space, but I have a really stubborn file/folder.  I'm going to remove it and I get a message saying that the file is not accessible by the system.  From there, I tried going through safe mode to delete, taking possession of the records, using prompt command to remove and even using Unlocker.  None of these methods was able to remove this darn folder.  Now, I don't know what to do next.  If unlocker failed to remove the folder, then I don't think that there many options remain outside to wipe the drive.  and it's something I don't want to do.  So, I ask, what should I do next?

  Picture of the Error Message

  Photo of properties of "folders".

  Hi ShoaJo,

  Error code 14, you can see the article mentioned and check.

  Explanation of error codes generated by Device Manager in Windows XP Professional

  http://support.Microsoft.com/kb/310123

  I hope this helps.

• error message when removing a program "an installation support file could not be installed, the system cannot find the file specified" _

  Try to delete a file from the Program Neighborhood Agent, so I can load a different version.  When I try to remove the program through the Control Panel, it says "an installation support file could not be installed, the system cannot find the file specified."

  Hello rarif, welcome.

  I recommend that you try and that you use the Windows Installer Cleanup Utility (WICU).

  1. go in:
  http://download.Microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe

  2. download the utility and install it
  3 run the utility from START > all programs > Windows Installer Cleanup...

  4. find the program you want to uninstall, then remove the
  5. next, restart your computer

  Let us know if this helps,

  Thank you! Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Message error "the file is not accessible by the system.

  I'm trying to reinstall HP C7280 complete installation of windows 7 64-bit Phoosmart.

  I downloaded the latest form of Web site installation package, but when I try to install it I get the message "the file cannot be accesed by the system.

  The file is C:\Program Files\HP\ (988329F4-A1A1-4D51-803C-EF2725A97627) \gup\auto. When I look at the file I can find it in the right place. Can anyone help?

  Try right click on the Setup files and select run as administrator.  Who should avoid permissions issues.  Let me know what happens.

• response file is not created for silent installation

  Trying to create a response to a silent installation file. From page 15 of the Installation and the Administration of PDF:
  
  Example: ' < location of the Setup file > \setup.exe "/ r /f1" < location of the answer "
  "file > \setup.iss.
  
  Fact that, but no setup.iss after running through the installation. Did a search on the C drive too, but found nothing.
  
  It is for the Developer Version 3.5.1 esp2 PUK.
  
  Our environment is Windows XP Service Pack 2.
  
  Anyone know why the answer file is not created as the directions indicate? Thank you.

  Hi Jason,

  I might have an idea on why it does not work.

  When you run setup.exe you see a menu option which indicates that following:

  Read me (see the Upgrade Guide)
  Read me (see the Setup Guide and Administration
  Installation (installation of the Oracle User Productivity Kit 3.5.1...)

  If so, you need to get out of this configuration. Then in the source (CD-ROM or the location of the installation), browse to the UPKTool folder, there you will see a file named setup.exe, it is the executable that is launched when you click on the button install.

  In any case, to create a response file, you will need to run this setup.exe, so when you run at a command prompt, you should have something like this:

  / F1/r 'D:\UPKTool\Setup.exe' "C:\\setup.iss"

  I mentioned the C drive instead of drive D because I assume that D is a CD-ROM drive otherwise you can place it on any place.

  I hope this helps.

  Kind regards
  Ray

• If I copy and paste a comment in a pdf when I create a comment copied xfdf file is not included.  Is it possible to add these comments copied to the xfdf file?

  If I copy and paste a comment in a pdf when I create a comment copied xfdf file is not included.  Is it possible to add these comments copied to the xfdf file?

  Hi Steve Whipple.

  This link (Acrobat Help |) Import and export comments ) seems relevant to your query. Please let me know if it allows you to export xfdf file comments.

  Kind regards

  Rahul Tyagi

• Cannot import the EXHD catalog to new mac error message: Parent folder does not allow for files to be created in the breast of this

  I have an old mac in 6 years that the battery exploded so I bought a new mac (Macbook Pro 13, 2015, running OS X El Capitan). I have an external hard drive that I backed up my LR5 the catalog and raw files on my old Mac. On my new mac, I have my EXHD plugged and the LR5 (of membership cloud of Adobe) running. I'm sailing LR5 to open the catalog on my EXHD do, essentially, on all my edits on my photos on my new computer. I get the attached message that it does not bc the parent folder does not allow for files to be created in the breast of the it.

  What should I do?

  Old mac still works so I was wondering if I could try to save the catalog on a USB (its about 4 GB) and rather than the new mac. Or try to save the EXHD catalog in a different way or something.

  Thank you very much!

  

  I copied the EXHD catalog to my new Mac desktop computer and then sailed LR5 catalog on my desktop. WORKED LIKE A CHARM!

• DG broker configuration file not created at the backup site

  Hello
  
  I try to configure dataguard for db (10.2.0.1) primary, standby is created as stby
  
  I configured a third node to the observer, I did the TNS entires and verified connectivity
  
  When I expressed
  
  ALTER system set dg_broker_start = True scope = both;
  
  on both nodes, the configuration files have been created at the primary site
  
  SQL > show parameter DG_BROKER_CONFIG
  
  VALUE OF TYPE NAME
  ------------------------------------ ----------- ------------------------------
  dg_broker_config_file1 string C:\ORACLE\PRODUCT\10.2.0\DB_1\
  DATABASE\DR1PRIMARY. A3
  dg_broker_config_file2 string C:\ORACLE\PRODUCT\10.2.0\DB_1\
  DATABASE\DR2PRIMARY. A3
  
  
  I checked the
  
  but the stby node
  
  SQL > show parameter DG_BROKER_CONFIG
  
  VALUE OF TYPE NAME
  ------------------------------------ ----------- ------------------------------
  dg_broker_config_file1 string C:\ORACLE\PRODUCT\10.2.0\DB_1\
  DATABASE\DR1STBY. A3
  dg_broker_config_file2 string C:\ORACLE\PRODUCT\10.2.0\DB_1\
  DATABASE\DR2STBY. A3
  
  There is no config file even though the parameter gives suggests that it had been created
  
  how I created these files
  
  without them I won't be able to add stby on the watcher node

  The config seems mostly OK. Suggest you add another roll forward Eve sign in primary and standby, then switch connects to the primary and see what you get errors.

• Firefox worked, today has not started with the error the version of this file is not compatible with the version of windows you are using.

  Computer is Windows 7 Ultimate 64 bit. Firefox has work fine for over a year on this computer. Nothing has been changed or updated updated except Windows update indicates that it installed updates on August 19. I had computer week before because only out of town, back entrance and began August 18, but Firefox has worked that day. Does not use FF again until today. Today August 22, firefox does not start, shortcut icon changed program not there. Exe in the folder when you click Poster error message says the version of this file is not compatible with the version of Windows, I am running. Exe of Firefox shows created on 20 August. I suspect the update, Windows or FF but lean towards windows, which was spent, who broke things. I noticed that IE 10 updates, updates of .NET framework and the malicious software removal tool have been installed. I tried to restart the computer, has not set. Tried to run as administrator, did not work. I don't want to uninstall FF, at least have to because of all the things I have here, bookmarks, last past passwords, etc..

  Hello

  Some Firefox problems can be solved by performing a clean reinstall. This means that you remove Firefox program files (not the profile folder, where the bookmarks are stored) and then reinstall Firefox. Please follow these steps:

  Note: You can print these steps or consult them in another browser.

  1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
  2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
  3. Remove the Firefox installation folder, which is located in one of these locations, by default:
     • Windows:
       • C:\Program Files\Mozilla Firefox
       • C:\Program Files (x 86) \Mozilla Firefox
     • Mac: Delete Firefox in the Applications folder.
     • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
  4. Now, go ahead and reinstall Firefox:
     1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
     2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

  Please report back to see if this helped you!

  Thank you.

• "This version of this file is not compatible with the version of Windows you are using. Check your computer's system information to see if you need a x 86 (32 bit) or x 64 (64-bit) version of the program.

  Hello

  I seem to be having problems when you try to install a program on my Windows 7 that allows to launch on my Windows XP and Windows Vista. I used the tool to solve compatibility problems and selected these settings in the CONFIGURATION file, but nothing seems to work the error message I get is as follows:

  "This version of this file is not compatible with the version of Windows you are using. Check your computer's system information to see if you need a x 86 (32 bit) or x 64 (64-bit) version of the program, and then contact the software publisher. »

  Is it possible to set my computer to allow this program to run successfully? Any solution would be greatly useful.

  Hello Rdforbe,

  The problem is a software that was created for Windows 95, 98, and Windows XP has no way to work correctly with an operating system that didn't even exist when the software was written. However, the error message you get normally means that you have a 32-bit software that you are trying to install on a 64-bit system.

  To find out if your computer is running 32-bit Windows or 64-bit, follow these steps:
  System opened by clicking on the button start , by clicking on the Control Panel, click System.
  Under system, you can view the system type. This will describe if you have 32-bit or 64-bit.

  You can also try compatibility mode.

  If the program is not compatible, then you try to install and run the program in compatibility mode.

  Use the following steps:

  (1) right click on the program

  2) click Properties

  3) click on the Compatibility tab

  (4) select run this program in compatibility mode and select Windows Vista or other operating system, the program has been run successfully.

  Check out the link here: make sure to run older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  If you are running Windows 7 Professional or Ultimate version, install Windows Virtual PC and Windows XP mode (http://www.microsoft.com/windows/virtual-pc/default.aspx) and run your software in Windows XP.

  If you run Windows 7 Home Premium, try VirtualBox (www.virtualbox.org) or VMware Player (www.vmware.com), or any other software virtualization part 3^rd and install a separate copy of Windows XP (family or professional edition) for this purpose. You can find the virtualization software free that will run on Windows 7 Home Premium.

  I hope this helps.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Signature keys: author.p12 file is not created

  I'm running the installation program to sign my BB10 app, but the author.p12 file is not created

  barsigner. CSK and barsigner.db the file is created, but author.p12 file is not created.

  While creating the files, the control interface gives the result:

  Info: CSK file created.

  Error: null

  Thanks in advance

  Work under WIndows?
  Delete barsigner.csk, barsigner.db of C:\Users\User\AppData\Local\Research In Motion file and try again

• Error message: "the version of this file is not compatible with the version of Windows that you are using", when you try to run an old ms - based back program in Win-7 Ultimate 64 bit.

  Original title: program compatibility Application Applications App Apps game games Legacy Crash crashes Hang hangs

  I get this message when you try to run an old MS-DOS - based program in Win-7 Ultimate 64-bit.

  "The version of this file is not compatible with the version of Windows you are using. Check your computer system information to see whether you need a x 86 (32 bit) or x 64 (64-bit) version of the program and then contact the software publisher. »

  I understand that I am under a 64 bit OS, but is it possible to get this program to run? I was wondering if anyone has tips :)

  Hi Bcopeland,

  Thanks for posting your question in the Microsoft Community.

  Based on the information, you are trying to install and use an old ms - dos program based in Windows-7 Ultimate 64-bit.

  The problem is a software that was created for Windows 95, 98, and Windows XP has no way to work correctly with an operating system that didn't even exist when the software was written. However, the error message you get normally means that you have a 32-bit software that you are trying to install on a 64-bit system.

  You can check the compatibility of the program with Windows 7, in the Compatibility Center.

  Compatibility Center

  If the program is not compatible, then you try to install and run the program in compatibility mode.

  a. click right on the program.

  b. click Properties.

  c. click on the tab compatibility.

  d. Select run this program in compatibility mode and select Windows Vista or whatever to use the system, the program was executed successfully.

  Here is an article that gives you more information on this:

  Make older programs in this version of Windows

  If the problem persists, you can get in touch with the software vendor to see for the latest version of the program to use the same system of 64-bit Windows 7.

  Hope the helps of information.

  If you need assistance in the future to resolve any issues related to Windows, post your query and we will be happy to help you.

• "The service user profile Service has no logon. User profile cannot be loaded. "and new users are not created in the registry, that is it please help

  I am trying to create new users on my computer windows 8 but it dosent open, I get a message "the service user profile service has no logon. User profile cannot be loaded. "and new users are not created in the registry, that is it please help

  I had the same problem.  Get the «user profile service has no user of logan...» "I tried everything I found online and nothing has worked.  Then I reinforced to the back and looked at the whole picture.  It turns out that it wasn't a computer after all problem but a question of the user.  Under folder C:/users/default in the end I managed to delete all subfolders except appdata.  So when you went to create a new user he could not find the correct files to copy to the new profile to store information in.  To ensure that I had a correct records back into the C:/users/default folder, I went on another computer and just copy paste the new default folder from another computer in the folder users on my computer and erased mine.  Of course I could create my comments and new users account once again.  Finally.

• A PDF file does not print on the new HP printer

  I recently added a printer HP CM1415fnw in my office and I can't print any PDF documents. Word and Excel print very well. Why?

  Well, the point is moot, because the true culprint was my lame OS

  (Vista), so my laptop is in the shop getting Windows 7... Thank you for all

  your advice!

  Bill@VT http://forums.adobe.com/people/Bill%40VT has created the discussion

  "Re: PDF files does not print on the new HP printer.

  To view the discussion, visit:

  http://forums.Adobe.com/message/4558299#4558299

• ODB file is not created

  I have two portable devices that produce both the same error. one is windows mobile 5 the second is windows mobile 6.1
  
  When I download and install an application the odb file (obs, the file data of two files and) are not created. even in the demo of transport which is published on the mobile server when downloaded
  in the Pocket and properly installed, odb files are not created. I tried to create my own application, create the tables in the software library, snapshots, etc. sequences, then then I published and downloaded to the terminal. odb database was not created.
  
  Please assist.thank you for your time
  
  PSI do not know if it has to do with my error
  If I choose the Packaging Wizard to create a sql query records only in some .sql files sql statements that implement the database?
  If so how can I run from my pocket computer.
  
  
  Published by: user2955130 on Sep 17, 2009 07:41
  
  Published by: user2955130 on Sep 17, 2009 07:41
  
  Published by: user2955130 on Sep 17, 2009 07:42
  
  Published by: user2955130 on Sep 17, 2009 07:42

  for the first question, the database file does not is downloaded, because when you created a new user, that it worked, my guess would be that the user does not instantiate correctly.

  In mobile manager > data synchronization > publications > users you should see a list of users associated with the application, and there is a flay to show if the user is successfully instantiated. If it is NOT, then there is a problem with the user being added to the publication, perhaps in data binding specified which create subsets of parameters.

  The database if you
  Select * from c$ all_client_items where clientid = then you should see all Articles in the publication for publication-, if you not, yet once something does not.

  If everything seems to be ok, then turn on the trace of the synchronization on the user in mobile manager and look at the logs generated, they tend to point you to the problem

  Regarding the access violation, for MSQL for conscli data do not change the user or password, simply connect (name of user and password is actually System/Manager, which is the default). for a database application, the user names is still system, but the password is the password for user

  so, if you have a user test1, password pass1
  for conscli - Manager/system
  application - system/pass1