XML over HTTP

Similar Questions

• Taking over Http in Blackberry

  Hello

  How to reach the socket on the connection Http (SOHT) connection in Blackberry devices?

  Help, please

  My understanding of this is not an outlet running over an http connection.  Who uses an http request to transfer the payload to the device rather than using a power outlet.  So, these are some alternative mechanisms, treated differently on the server and the device, not the layers of alternative communication.

  A difference between a socket connection and http is connection - socket is continuous, http is not.  You will see from here:

  http://www.operamini.com/Help/FAQ/#http-socket

  If Exchange you it for an http connection, you lose the connection continues. This confirms, as far as I'm concerned, that Opera mini did not use the socket over http.

• ODIInvokeWebservice for ssl over http

  Hi all

  I am tempted to invoke a Web service that is ssl over http from the studio of ODI and receive error below.

  I use the ODI Version is: Build ODI_11.1.1.7.0_GENERIC_130302.2156

  Measures have already tried:

  1. Service SOAP-UI successfully tested.
  2. WSDL is available on the browser.
  3. Tried to test after configuration proxy http server in ODI ide with details of the appropriate proxy server (a similar setup as in step 1 and step 2).
  4. Tried the update of ide.conf with VM options below
     1. AddVMOption - Dhttps.proxyHost = www-proxy.uk.oracle.com
     2. AddVMOption - Dhttps.proxyPort = 80
     3. AddVMOption - Dhttp.proxyHost = www-proxy.uk.oracle.com
     4. AddVMOption - Dhttp.proxyPort = 80

  I am getting below error:

  1. com.sunopsis.wsinvocation.SnpsWSInvocationException: com.sunopsis.wsinvocation.SnpsWSInvocationException: unable to connect

  at com.sunopsis.wsinvocation.client.WebServiceFactory.getParserIstance(WebServiceFactory.java:95)

  at com.sunopsis.wsinvocation.client.WebServiceFactory.getParserIstance(WebServiceFactory.java:126)

  to com.sunopsis.graphical.wsclient.RequestWsPane$ 17.doInBackground(RequestWsPane.java:1669)

  to com.sunopsis.graphical.tools.utils.swingworker.SwingWorker$ 1.call(SwingWorker.java:240)

  at java.util.concurrent.FutureTask.run(FutureTask.java:262)

  at com.sunopsis.graphical.tools.utils.swingworker.SwingWorker.run(SwingWorker.java:278)

  at oracle.ide.dialogs.ProgressBar.run(ProgressBar.java:655)

  at java.lang.Thread.run(Thread.java:744)

  Caused by: com.sunopsis.wsinvocation.SnpsWSInvocationException: unable to connect

  at oracle.odi.wsinvocation.client.impl.jaxws.OdiJaxwsParserImpl.setWsdlUrl(OdiJaxwsParserImpl.java:163)

  at com.sunopsis.wsinvocation.client.WebServiceFactory.getParserIstance(WebServiceFactory.java:89)

  ... 7 more

  Caused by: javax.net.ssl.SSLException: message unrecognized SSL, plaintext connection?

  at sun.security.ssl.InputRecord.handleUnknownRecord(InputRecord.java:671)

  at sun.security.ssl.InputRecord.read(InputRecord.java:504)

  at sun.security.ssl.SSLSocketImpl.readRecord(SSLSocketImpl.java:927)

  at sun.security.ssl.SSLSocketImpl.performInitialHandshake(SSLSocketImpl.java:1312)

  at sun.security.ssl.SSLSocketImpl.writeRecord(SSLSocketImpl.java:702)

  at sun.security.ssl.AppOutputStream.write(AppOutputStream.java:122)

  at java.io.BufferedOutputStream.flushBuffer(BufferedOutputStream.java:82)

  at java.io.BufferedOutputStream.flush(BufferedOutputStream.java:140)

  at org.apache.commons.httpclient.HttpConnection.flushRequestOutputStream(HttpConnection.java:828)

  at org.apache.commons.httpclient.HttpMethodBase.writeRequest(HttpMethodBase.java:2116)

  at org.apache.commons.httpclient.HttpMethodBase.execute(HttpMethodBase.java:1096)

  at org.apache.commons.httpclient.HttpMethodDirector.executeWithRetry(HttpMethodDirector.java:398)

  at org.apache.commons.httpclient.HttpMethodDirector.executeMethod(HttpMethodDirector.java:171)

  at org.apache.commons.httpclient.HttpClient.executeMethod(HttpClient.java:397)

  at org.apache.commons.httpclient.HttpClient.executeMethod(HttpClient.java:323)

  at oracle.odi.wsinvocation.client.impl.jaxws.OdiJaxwsParserImpl.setWsdlUrl(OdiJaxwsParserImpl.java:126)

  ... 8 more

  This looks like a bug to me. IDE seeks to communicate via SSL on regular connection.

  There is no reserved space in the IDE to provide details of SSL proxy.

  Please let me know if someone is facing this problem.

  Thank you guys.

  Obtained after application of Patch 16301360 patch available on work support.

  Concerning

  Vivek

• Plugin to support MS Exchange Server receive emails via RPC over HTTPS

  Hi all

  I have small problem, in our field in the future Exchange is only open for communication via HTTPS.

  At the same time, POP3 and IMAP are turned off.

  Is there a plugin that allows to use RPC over HTTPS to the reading emails?

  Michael

  Problem solved with the workaround: http://davmail.sourceforge.net/

• Muse in the preview is not working. Doesn't have a prior view. Cannot establish a connection over HTTP. How can I fix? Antivirus protection does not block. Firewall disabled

  Muse in the preview is not working. Doesn't have a prior view. Cannot establish a connection over HTTP. How can I fix? Antivirus protection does not block. Firewall disabled

  Sorry I forgot to paste the link in the previous answer,

  Here's the link - Preview fails in muse

  Kind regards

  _Ankush

• Failed to start the computer over HTTP: Error 1000

  I'm testing an upgrade from version 2.9 to 2.10 so I can upgrade our 6.0u2 ESXi hosts to solve the problem of multiple appstacks slow attachment.  However, I get this error on half of my offices.  I tried both 2012R2 and for the administration server 2008R2.  It is installed with local SQL.  Desktop computers are Windows 7, floating pool linked clone.  Looks like that in the beginning it shows a "HttpInitializeRequest: status response 200 Manager (2 bytes) ': OK ' but try again"computer startup on HTTP failed: Error 1000 ".  Once virtualization fails is disabled and no appstacks cling.

  I have logs from two desktop computers, a successful failure:

  In case of failure:

  [19:24:58.937 2016-03-25 UTC] [svservice:P828:T856] OnCreateSession called (CF 000000000036, 50, Params 0000000000F6E840, context 0000000000000000 manage the ID from Session 1)

  [19:25:01.862 2016-03-25 UTC] [svservice:P828:T312] Computer (Microsoft format) UUID: F6A62A42-87FE-778B-EA05-F56BBADBCD04

  [19:25:01.862 2016-03-25 UTC] [svservice:P828:T312] Computer (VMware format) UUID: 422aa6f6-fe87-8b77-ea05-f56bbadbcd04

  [19:25:01.862 2016-03-25 UTC] [svservice:P828:T312] Initialize the HTTP session

  [19:25:01.871 2016-03-25 UTC] [svservice:P828:T312] Initialize the HTTP connection

  [19:25:01.871 2016-03-25 UTC] [svservice:P828:T312] Shuffing 1 Manager (s)

  [19:25:01.892 2016-03-25 UTC] [svservice:P828:T312] IsDomainJoinedComputer: NetGetJoinInformation() success, BUSINESS domain name and type is 3

  [19:25:01.921 2016-03-25 UTC] [svservice:P828:T312] Seed URL: / pre-startup? name = svservice & to uuid = 422aa6f6-fe87-8b77-ea05-f56bbadbcd04 & to status = 0 & osver = 6.1.7601 & to sp = 1.0 & suite = 256 & product = 1 & to arch = 9 & proc = 1 & to agentver = 2.10.0.871U & area = SOCIETY & to workstation = AV210TSTPA01 & machinesid=S-1-5-21-2909739094-3781615540-3712082287

  [19:25:01.921 2016-03-25 UTC] [svservice:P828:T312] [0] access appvtest.COMPANY.com:80 via HTTP (attempt 1)

  [19:25:02.301 2016-03-25 UTC] [svservice:P828:T312] HttpReadAllAvailableData: Error 0 in WinHttpQueryDataAvailable: dwSize 0

  [19:25:02.301 2016-03-25 UTC] [svservice:P828:T312] HttpInitializeRequest: Response Manager status 200 (2 bytes): OK

  [19:25:02.301 2016-03-25 UTC] [svservice:P828:T312] LogonMount: agent: 0 Manager: 0 or to attach the volumes

  [19:25:02.347 2016-03-25 UTC] [svservice:P828:T312] IsDomainJoinedComputer: NetGetJoinInformation() success, BUSINESS domain name and type is 3

  [19:25:02.358 2016-03-25 UTC] [svservice:P828:T312] Computer start URL: / computer startup? name = svservice & uuid = 422aa6f6-fe87-8b77-ea05-f56bbadbcd04 & status = 0 & osver = 6.1.7601 & sp = 1.0 & suite = 256 & product = 1 & arch = 9 & proc = 1 & agentver = 2.10.0.871U & area = COMPANY & workstation = AV210TSTPA01 & seed = 1 & machinesid=S-1-5-21-2909739094-3781615540-3712082287

  [19:25:02.358 2016-03-25 UTC] [svservice:P828:T312] [0] access appvtest.COMPANY.com:80 via HTTP (attempt 1)

  [19:30:01.666 2016-03-25 UTC] [svservice:312] WinHttpReceiveResponse the timeout of waiting for response

  [19:30:01.666 2016-03-25 UTC] [svservice:P828:T312] Retrying in 5 seconds (expected 300 seconds on 300 max)

  [19:30:06.662 2016-03-25 UTC] [svservice:P828:T312] Abandonment of application HTTP after having exceeded the time limit (300 seconds)

  [19:30:06.662 2016-03-25 UTC] [svservice:312] Failed to start the computer over HTTP: Error 1000

  [19:30:06.662 2016-03-25 UTC] [svservice:P828:T312] HttpComputerStartupThread: failure (starting the computer)

  Successful operation:

  [19:24:58.843 2016-03-25 UTC] [svservice:P820:T852] OnCreateSession called (Session ID 1, 00000000003CFB60, Params 0000000000F4E880 0000000000000000 context handle)

  [19:25:01.251 2016-03-25 UTC] [svservice:P820:T560] Computer (Microsoft format) UUID: 72F62A42-0EF6-DBCA-0BE1-DF5682A376C5

  [19:25:01.251 2016-03-25 UTC] [svservice:P820:T560] Computer (VMware format) UUID: 422af672-f60e-cadb-0be1-df5682a376c5

  [19:25:01.251 2016-03-25 UTC] [svservice:P820:T560] Initialize the HTTP session

  [19:25:01.262 2016-03-25 UTC] [svservice:P820:T560] Initialize the HTTP connection

  [19:25:01.262 2016-03-25 UTC] [svservice:P820:T560] Shuffing 1 Manager (s)

  [19:25:01.265 2016-03-25 UTC] [svservice:P820:T560] IsDomainJoinedComputer: NetGetJoinInformation() success, BUSINESS domain name and type is 3

  [19:25:01.584 2016-03-25 UTC] [svservice:P820:T560] Seed URL: / pre-startup? name = svservice & to uuid = 422af672-f60e-cadb-0be1-df5682a376c5 & to status = 0 & osver = 6.1.7601 & to sp = 1.0 & suite = 256 & product = 1 & to arch = 9 & proc = 1 & to agentver = 2.10.0.871U & area = SOCIETY & to workstation = AV210TSTPA02 & machinesid=S-1-5-21-2909739094-3781615540-3712082287

  [19:25:01.584 2016-03-25 UTC] [svservice:P820:T560] [0] access appvtest.COMPANY.com:80 via HTTP (attempt 1)

  [19:25:02.039 2016-03-25 UTC] [svservice:P820:T560] HttpReadAllAvailableData: Error 0 in WinHttpQueryDataAvailable: dwSize 0

  [19:25:02.039 2016-03-25 UTC] [svservice:P820:T560] HttpInitializeRequest: Response Manager status 200 (2 bytes): OK

  [19:25:02.039 2016-03-25 UTC] [svservice:P820:T560] LogonMount: agent: 0 Manager: 0 or to attach the volumes

  [19:25:02.161 2016-03-25 UTC] [svservice:P820:T560] IsDomainJoinedComputer: NetGetJoinInformation() success, BUSINESS domain name and type is 3

  [19:25:02.180 2016-03-25 UTC] [svservice:P820:T560] Computer start URL: / computer startup? name = svservice & uuid = 422af672-f60e-cadb-0be1-df5682a376c5 & status = 0 & osver = 6.1.7601 & sp = 1.0 & suite = 256 & product = 1 & arch = 9 & proc = 1 & agentver = 2.10.0.871U & area = COMPANY & workstation = AV210TSTPA02 & seed = 1 & machinesid=S-1-5-21-2909739094-3781615540-3712082287

  [19:25:02.180 2016-03-25 UTC] [svservice:P820:T560] [0] access appvtest.COMPANY.com:80 via HTTP (attempt 1)

  [19:25:03.111 2016-03-25 UTC] [svservice:P820:T560] HttpReadAllAvailableData: Error 0 in WinHttpQueryDataAvailable: dwSize 0

  [19:25:03.111 2016-03-25 UTC] [svservice:P820:T560] HttpInitializeRequest: Response Manager status 200 (34 bytes): START COMPANY\AV210TSTPA02$

  [19:25:03.112 2016-03-25 UTC] [svservice:P820:T560] HttpComputerStartupThread: managed (starting the computer)

  [19:25:03.112 2016-03-25 UTC] [svservice:P820:T560] LogonMount: agent: 0 Manager: 0 or to attach the volumes

  Just curious, it's someone else is seeing this with 2.10 and if you have, how solve you this problem?

  If you are using some kind of power management on the VDI? It seems as if the machine is unable to reach the HTTP Appvolumes service for any reason any newspaper which shows success connects withion a fraction of a second if the server doesn't seem to be to busy.

  Maybe you try to join an appstack that has some sort of firewall inside rule?

• Mixed content: the page at... has been loaded over HTTPS, but asked a stylesheet unsecured

  Hello

  Whenever I export my site, I've got this wrong:

  Mixed content: the page to ' https://UK.globalgig.com/index.html "was loaded over HTTPS, but asked a untrusted style sheet" http://fonts.googleapis.com/CSS?family=Maven%20PRO '. This request has been blocked; the content should be served over HTTPS.

  How should I do?

  Thank you.

  Lisa

  Hello Lisa,.

  You get this error because your site domain name is https:// and the section of your site called a style sheet for a font, a path not https:// ('http://fonts.googleapis.com/css?family=Maven%20Pro'.)

  To avoid this, you need to make sure that the url of the link that points to the stylesheet of the police has also https:// inside. If you have entered this code manually and then change the code and upload it to the server. Where the code is generated via a widget and then contact the developer of the widget to the correction of the code.

  I can see that the two ("http://fonts.googleapis.com/css?family=Maven%20Pro".)  and ("https://fonts.googleapis.com/css?family=Maven%20Pro".) are links to work with the same information, so it should not be issue after updating to https://

  
  

  
  

  Kind regards

  Vivek
  

• JMS over HTTP, HTTP tunneling, imqhttp, Glassfish, Open MQ

  Hello
  
  I want to run JMS over HTTP, because of the firewall.
  
  My environment:
  
  -Windows 7 64 bit
  -Java EE 6 SDK (Glassfish 3, java_ee_sdk-6u4-jdk7-windows - x 64 .exe installer)
  
  Following the instructions (Guide of Administration of Oracle GlassFish Server Message queue, support HTTP/HTTPS), I did as follows:
  
  1 - editing default.properties (in my D:\usr\Glassfish3\mq\lib\props\broker\default.properties folder) by adding 'httpjms' to imq.service.activelist, so I have:
  
  # List of active services, launched at startup
  IMQ.service.activelist = JMS, admin, httpjms
  
  2 - updated the server.policy file (in my case D:\usr\Glassfish3\glassfish\domains\domain1\config\server.policy) by adding at the end:
  
  give the code "file:${com.sun.aas.installRoot}/glassfish/domains/domain1/applications/imqhttp/-" {}
  
  permission java.net.SocketPermission «*»,
  'connect, accept, resolve';
  
  };
  
  3 - I don't, then using the Glassfish administration Console (listening on port 4848), deployed the application packaged in the WAR (the WAR file from D:\usr\Glassfish3\mq\lib) imqhttp.war file, by using "imqhttp" as the name of the context root.
  
  4.-j' I then invoke URLS http://127.0.0.1:8080/imqhttp/tunnel and get the following back:
  
  HTTP tunneling servlet ready.
  Servlet start time: Wed Jul 04 19:28:01 CEST 2012
  Accepts the brokers on port TCP connections: 7675
  Total available brokers = 1
  List of Broker:
  Antec:imqbroker
  
  Important: I had to restart everything, including Windows to get the broker in the broker list.
  
  ...uh !!???!! .. .it just shows that the validation to the groups of discussion and sharing are awesome... yesterday, I couldn't this work, I had nothing in my list of broker and a bunch of exceptions when you try to post a message... I swear to you that I restarted Glassfish several times... now it works very well, and in the meantime, the only thing that I did is restart the PC...
  
  In any case, I keep the post, it might be useful to someone.
  
  Subsequently
  
  Varus

  The new broker imq.service.activelist property setting take effect, if the jms BUILT-IN (default) service is used, the GlassFish server needs to be restarted; otherwise, the broker process must be restarted. If the JMS (INTEGRATED mode) in the GlassFish server service has not been started (because of GlassFish JMS lazy init - default), run "asadmin jms-ping" will start the broker integrated into GlassFish server.

• How can I have my partner over HTTPS messages

  My partners want to send messages over HTTPS and I can't see what follows in one of the threads. It is good even for HTTP (S) or the HTTP protocol?
  
  "or cannot create channel listen HTTP." There is a channel to listen to HTTP to default you should use-
  
  http://hostname:soa_server_port/b2b/httpReceiver or http://hostname:soa_server_port/b2b/transportServlet
  
  Your remote TP may publish documents to the URL above.
  "
  
  Thank you
  Vincent

  Vincent,

  It is true for HTTPS as well. The partner must validate documents on the url (if SSL is enabled on the server of SOA)-

  https://hostname:soa_server_port/b2b/httpReceiver or https://hostname:soa_server_port/b2b/transportServlet

  If you use any off-loader SSL for your front door, then the host and the port will change accordingly.

  Kind regards
  Anuj

• Problem with large XML files over HTTP segmented analysis

  I am trying to isolate a bug introduced when the JRE in Java 7u51 use 7u71 without changing the codes. The problem seems to be very similar to: Bug ID: JDK-8027359 XML parser returns incorrect results of analysis.

  Further investigation showed that it was also introduced in the same versions (7u71) where this patch has been applied. Unlike this bug, my XML is marked as version 1.0. He also seems to be with only large XML, the order of 10 MB files or more.

  Is the closest I've been able to reduce it down to the code uses JAXB to disrupt a flow which tells me that the debugger is an org.apache.http.com.EofSensorInputStream / org.apache.http.impl.io.ChunkedInputStream. The exception I get is not consistent, but usually appears from pieces are replaced or mixed, with result the letters appearing in the attributes that are actually numbers, or like the following, where an attribute "testAttribute" gets partially crushed by the end of a timestamp that was in another section of the XML file.

  javax.xml.bind.UnmarshalException
  - with linked exception:
  [javax.xml.stream.XMLStreamException: ParseError at [row,col]:[1,98748]
  Message: Attribute name "testAttribu00Z" associated with an element type "testElement" must be followed by the ' = ' character.]
    at com.sun.xml.internal.bind.v2.runtime.unmarshaller.UnmarshallerImpl.handleStreamException(UnmarshallerImpl.java:421)
    at com.sun.xml.internal.bind.v2.runtime.unmarshaller.UnmarshallerImpl.unmarshal0(UnmarshallerImpl.java:357)
    at com.sun.xml.internal.bind.v2.runtime.unmarshaller.UnmarshallerImpl.unmarshal(UnmarshallerImpl.java:334)
  Caused by: javax.xml.stream.XMLStreamException: ParseError at [row,col]:[1,98748]
  Message: Attribute name "testAttribu00Z" associated with an element type "testElement" must be followed by the ' = ' character.
    at com.sun.org.apache.xerces.internal.impl.XMLStreamReaderImpl.next(XMLStreamReaderImpl.java:598)
    at com.sun.xml.internal.bind.v2.runtime.unmarshaller.StAXStreamConnector.bridge(StAXStreamConnector.java:181)
    at com.sun.xml.internal.bind.v2.runtime.unmarshaller.UnmarshallerImpl.unmarshal0(UnmarshallerImpl.java:355)
    ... 6 more
  
  
  

  A code here which seems to reproduce if you can connect to an XML server that returns a large segmented XML file:

    SchemeRegistry registry = new SchemeRegistry();
    registry.register(
                  new Scheme("http", 80, PlainSocketFactory.getSocketFactory()));
    HttpClient client = new DefaultHttpClient(new BasicClientConnectionManager(registry));
    String url = "http://someUrlReturningAlargeChunkedXML";
    HttpGet method = new HttpGet(url);
    HttpResponse response = client.execute(method);
  
    InputStream inputStream = response.getEntity().getContent();
  
    XMLStreamReader responseReader = factory.createXMLStreamReader(inputStream);
    JAXBElement<JaxBObjectOfResponse> wot = unmarshaller.unmarshal(responseReader, JaxBObjectOfResponse.class);
  
  
  

  There is no error if you connect using URL.openStream () to the same service. If I read bytes directly and write to a file, there is no error. The error occurs only when I try to disrupt it is great and I use Java 7u71 (or later). It can be constantly repeated with the jsp webapp I use, but did not show the error when I used the same code with a Wikipedia dump XML file.

  How can I unmarshal differently to avoid this problem? Or, how can I best isolate the bug so it can be sent to the appropriate bugs system?

  Seems to be related to this bug, which will be fixed in 7u80 and others (in April?).

  http://bugs.Java.com/bugdatabase/view_bug.do?bug_id=8059327

  Tests with the final version in early 7u80 showed it fixed my related question.

• TargetNamespace XML with https. Are there issues in a url https on the targetNamespace, including?

  Hi all!

  A small question;

  Is it really important on a targetNamespace if I place a https rather than an http url address?

  say for example:

  " xmlns =" https://my.customer.com/webapp "

  "targetNamespace ="https://my.customer.com/WebApp"

  It is because the WebApp client is on a secured therefore the Web application on this URL so I wanted to know if it really matters in the end or it is just a reference?

  Is it really worries?

  Kind regards!

  Hello

  the targetNamespace attribute is for the identification and the determination of the scope and it doesn't really matter if a resource exists at that location or not. It must be unique when it is used with other xml files. So in your case, https should not ask any questions.

  Kind regards

  SAI

• RH10 > WebHelp > Table of contents/Glossary/Search does not work in IE9 over HTTPS

  We have recently upgraded from RH8 RH10 and almost immediately met (seems to be) an old question.

  Use Adobe TCS 4.0, we create our content in FrameMaker 11, then link to Robohelp. After you generate Webhelp, we tested the output from a local computer. Everything worked as expected.

  Then we checked the files in Microsoft TFS and hosted the Webhelp on an HTTPS server. However, when we tested the output using Internet Explorer 9 and 23 of Chrome, we found that:

  1. Table of contents does not appear.
  2. Glossary (which we renamed acronyms) does not appear.
  3. Research does not (from the quick search or tab "Search" bar).
  4. SWFs (since Adobe Captivate) inserted in the subjects not appearing or play.

  We do not have a clue, but I guess that would not have worked either. I have attached the screenshots you can see the problem:

  

  Adobe previously released a fix for the file whutils.js RH8 and RH9, used to be hosted here: https://Acrobat.com/#d=WqbdTq-2R79ToU08-zfBEw (link now broken). I guess it's a similar problem with a similar fix. I will file a bug report, but I wanted to see if the community had any quick fix since we are on time.

  You can see the full history of forum here: http://forums.Adobe.com/thread/822754?TSTART=0

  So after the commitment of our development team, we have solved the problem at the moment.

  We had two new variables with our process for this version:

  1. For the first time using TCS4 (prev 2.5)
  2. First check files in directly to Microsoft TFS using the Control Source of Visual Studio (previously zipped WebHelp, posted to SharePoint, sent the link to the developers).

  It turns out that the second variable is the culprit here. HR is off the hook for now. For unknown reasons, Visual Studio has been excluding logging files (without notice). Once we performed an additional step (click with the right button on the Visual Studio directory > add items), he picked up the missing files and everything worked as expected in the staging / QA environment.

  The missing file was WebHelp > resource > resource_.xml.js.

  Next step on our end is to test the integrated HR > TFS Source control. (We have no thought) we did not have enough time to test the published WebHelp directly to TFS using the plugin HR 10 - don't know if it would make a difference or not. We will test correctly between releases and see if it works or not.

  Very, very strange but that Visual Studio behave like that on such a simple, every day version control procedure. My dev team is baffled - and these guys are good enough to make it a real rarity.

• Need help getting A value in My App using xml/php http request

  I know that maybe this isn't the place to ask questions about php, but I thought that people may have encountered a similar problem and I'm getting desperate basically my application's data is stored in a mysql database table, and what I have to do is to get the value of auto increment of this table in my application via an http request. I'm doing a php file that gets this value and displays this value in the xml format, but I'm terrible at creating php to do such things and just get the constant errors. Can someone take a look at this and help me to tweak it so it does what I want it please? The table in question is called links and the line/field/column in the table I'm after is called linkid. This is the next value of auto-increment this line printed in xml format, that's what I want. Here is the php so far:-

  <?php 
  header("Content-type: text/xml"); 
  $host = ""; 
  $user = ""; 
  $pass = ""; 
  $database = ""; 
  $linkID = mysql_connect($host, $user, $pass) or die("Could not connect to host."); 
  mysql_select_db($database, $linkID) or die("Could not find database."); 
  $tablename   = "links";
  $next_increment  = 0;
  $qShowStatus   = "SHOW TABLE STATUS LIKE '$tablename'";
  $qShowStatusResult  = mysql_query($qShowStatus) or die ( "Query failed: " . mysql_error() . "<br/>" . $qShowStatus );
  $row = mysql_fetch_assoc($qShowStatusResult);
  $next_increment = $row['Auto_increment'];
  echo "next increment number: [$next_increment]"; 
  ?>
  

  Hello

  step 1. the customer wants to add a new record. and sends a request for a new record

  step 2. the server adds a new record in the database (now its Blanck) and returns its ID number

  step 3.  the customer has now has an appropriate identification number and use it to add a new object to the table

  step 4. the customer with a registration ID and the new data for this "empty folder" is an update not an insert.

  step 5. You now have the table and database synchronization.

  David.

• using AMFPHP over https?

  Someone has managed to do this? I keep getting connection errors. With the help of "Charles" I found that the gateway.php calls were called http:// instead of https://.

  My httpd.conf forces all connections on port 80 to port 443.

  My services - config.xml is pointing to the https:// location gateway.php.

  Charles shows that the 'GET' use HTTPS is not the case of the 'POST' (which means 'gateway.php').

  Is there another step I missed to get this race? If I disable the port forwarding, it works but now my calls to the authority of the financial markets is not encrypted.

  Suggestions?

  You use the SecureAMFChannel? Probably you can edit your definition of channel here.

• Dynamic authentication over HTTP

  Hi all
  
  I set myself up to Oracle Http Server (OHS) 11g and I have set up as HTTPS. I put my dads.conf for dynamic authentication file, and I was wondering if the prompt for the user name and password database was also over SSL?
  
  Thank you!

  Yes.

  Quote:
  "+ Authentication basis via an SSL connection, however, will be secure, since everything is going to be encrypted, including the user name and password. + »

  Source: http://httpd.apache.org/docs/1.3/howto/auth.html#basicworks