XNET: Y at - it a playback feature the number of sessions created?

Similar Questions

• Calculation of the number of sessions of relaxation JTAPI

  Assumea Trigger 1111 5 sessions and the Group of call control, say 20 ports as well as the Application as the session 20.

  If the part of the script requests a call-redirect to another trigger 2222 - the number of sessions to 1111 will decrease by one after the call-forwarding? (Note that it does not call a subflow but a redirect to appeal to another trigger)

  Thank you!

  Yes, the number of sessions for 1111 decreases by one after the call forwarding.

• The number of dynamically created button

  Recently, I started to give my button dynamically shares. I did something like this:
  
  for (var i: Number = 0; i < inches; i ++) {}
  thumb_scroller.all_thumbs ["Thumb" + i].bdr._alpha = 0;
  var ref: MovieClip = thumb_scroller.all_thumbs ["thumb" + i];
  ref.onRollOver = function (): Void {}
  btnRollOver (this, btnFadeTime1);
  }
  ref.onRollOut = function (): Void {}
  btnRollOff (this, btnFadeTime1);
  }
  ref.onRelease = function (): Void {}
  clickAction();
  resetThumbBtns (this);
  }
  };
  
  I now have a table filled from an xml document. Each when you click on the button should display its corresponding string for this table. For example, when I click on the button 5 I want to show a string five of myArray. This will go in the clickAction function. I don't know how to do, is to give each button that number just in itself so I can call to the table. I tried clickAction (i); but obviously I have is updated and is then a number and not a different one for each button.
  
  How can I do this? I know I could do with an ifStatement, but it would create tons of code, it is has 50 buttons.
  
  Thanks a lot for any help with this.

  you could do an it in one could ways, either by using the name of the button as the id, i.e. If all buttons are referred to as "btn1", "btn2"... etc then just use substr on the name property to strip the "btn" and analyze the remains to the number of characters.

  Or the fastest way would be to just incorporate a variable to each button in the loop of storage to the value of i

  i.e.

  for (var i: Number = 0; i< thumbs;="">
  thumb_scroller.all_thumbs ["Thumb" + i].bdr._alpha = 0;
  var ref: MovieClip = thumb_scroller.all_thumbs ["thumb" + i];

  store the variable inside the button
  ref.iNum = I have

  ref.onRollOver = function (): Void {}
  btnRollOver (this, btnFadeTime1);
  }
  ref.onRollOut = function (): Void {}
  btnRollOff (this, btnFadeTime1);
  }
  ref.onRelease = function (): Void {}
  Use this.iNum to reference the stored variable inside of the / Ref
  trace (this.inum);
  Then go this.iNum, wherever you like
  clickAction (this.iNum);
  resetThumbBtns (this);
  }
  };

• the number of pages created

  Hello, gentlemen. I have a very important question. Before you begin to create a great website, I want to ask. Tell me, please, on the maximum number of pages than I can count when creating a Web site? If the program can handle pages 3500-5000? Or do I need a CMS? What is not? Thank you.

  Hello

  See the response of the Zak in the following thread

  MUSE - max n ° of pages

• Limit the number of console sessions

  Hi all

  Is it possible to limit the number of the Console of the VM by VM session?  At work, my team all have access to the same virtual machine, but sometimes if I work within a certain VM, I don't want others to access the VM console even while I work in it.  Is it possible to limit the number of session up to 1?

  Thank you.

  You can edit vmx virtual machine with RemoteDisplay.maxConnections = 1 for a session or another number you want. Changes can be made by editing the virtual machine and select the Options tab and select general and click on Configuration settings...

• How to detect the number of created quickobjects

  How to detect the number of quickobjects created? quickobject are quickbox2d.

  Basically, I have a timer that will countdown to 4 seconds and it will create a falling ball, it will get removed when she falls down. However, I want only there so that if more than 5 bullets are in step, it will cease to create until it is less than 5 to start creating some balls again. Is there a way I can do?

  It's the timer to create the ball

  If (! _ballCreation_timer) {}

  _ballCreation_timer = new timer (4000);

  _ballCreation_timer.addEventListener (TimerEvent.TIMER, _onBallCreationTimer);

  }

  _ballCreation_timer. Start();

  Function which create the ball based on clock

  function _onBallCreationTimer (e:TimerEvent): void {}

  _doCreateNewBall();

  }

  function _doCreateNewBall() {}

  _ball_quickobject = sim.addCircle ({x: PHYSICS_SCALE * (960), y: PHYSICS_SCALE * (10), RADIUS: 0.5, draggable: false});

  MAKE A LIST OF BALLS

  _balls_array.push (_ball_quickobject);

  }

  This is the part where if the table (QuickObject) ball falls down and are destroyed

  addEventListener (Event.ENTER_FRAME, _onEnterFrame);

  DRAW EACH BALL FALLING OUT OF THE SCREEN

  function _onEnterFrame (aEvent: Event): void {}

  for each (var quickObject: QuickObject in _balls_array) {}

  BALL FALLING OUT OF THE SCREEN?

  If (quickObject.y / PHYSICS_SCALE > 1080) {}

  _doHandleBallOffScreen (quickObject);

  }

  }

  }

  DESTROY THE BALL FALL OFF THE SCREEN IF

  function _doHandleBallOffScreen (aQuickObject: QuickObject): void {}

  DESTROY THE OBJECT

  aQuickObject.destroy ();

  REMOVE FROM THE CUSTOM TABLE

  _balls_array.splice (_balls_array.indexOf (aQuickObject), 1);

  }

  check the length of _balls_array.  If it is greater than 5, do not create another bullet:

  If (! _ballCreation_timer) {}

  _ballCreation_timer = new timer (4000);

  _ballCreation_timer.addEventListener (IMER TimerEvent.T, _onBallCreationTimer);

  }

  _ballCreation_timer. Start();

  Function which create the ball based on clock

  function _onBallCreationTimer (e:TimerEvent): void {}

  _doCreateNewBall();

  }

  function _doCreateNewBall() {}

  If (_balls_array.length<>

  _ball_quickobject = sim.addCircle ({x: PHYSICS_SCALE * (960), y: PHYSICS_SCALE * (10), RADIUS: 0.5, draggable: false});

  MAKE A LIST OF BALLS

  _balls_array.push (_ball_quickobject);

  }

  }

  This is the part where if the table (QuickObject) ball falls down and are destroyed

  addEventListener (Event.ENTER_FRAME, _onEnterFrame);

  DRAW EACH BALL FALLING OUT OF THE SCREEN

  function _onEnterFrame (aEvent: Event): void {}

  for each (var quickObject: QuickObject in _balls_array) {}

  BALL FALLING OUT OF THE SCREEN?

  If (quickObject.y / PHYSICS_SCALE > 1080) {}

  _doHandleBallOffScreen (quickObject);

  }

  }

  }

  DESTROY THE BALL FALL OFF THE SCREEN IF

  function _doHandleBallOffScreen (aQuickObject: QuickObject): void {}

  DESTROY THE OBJECT

  aQuickObject.destroy ();

  REMOVE FROM THE CUSTOM TABLE

  _balls_array.splice (_balls_array.indexOf (aQuickObject), 1);

  }

• -Error ORA-00932: inconsistent data types: expected TANK got the NUMBER

  Here is my report query...
  

  select 
  *
  from   DW_RFA_JOBDATA
  where  FINISH_TIME >= :P1_START_DATE 
  and FINISH_TIME < :P1_END_DATE
       AND RFA_FLAG = (CASE :P1_JOB_CLASSIFICATION WHEN '0' THEN 'LSF'
                                    WHEN '1' THEN 'NON-LSF' 
                                    ELSE RFA_FLAG END)

  The column data type RFA_FLAG is NUMBER(*,0)... I'm view RSA and RSA - not the area of selection, but I get the error ORA-00932: inconsistent data types: expected TANK got the NUMBER >
  
  I have created a static LOV with LST display 0 return
  Display NON - RSA 1 return...
  
  Could any body please help me in truble shooting error? How to to convert the data type to number, I have no privileges to make changes to the table...

  Mark you my previous answer as correct? (MOST POINTS!  :))

• Is there a way to disable automatic playback during playback of a clip in full screen or a way to see the number of frame of a clip during playback in full screen?

  Is there a way to disable automatic playback during playback of a clip in full screen or a way to see the number of frame of a clip during playback in full screen? Thank you!

  Not that I know of.

  You can always send a feature request: Final Cut Pro--> provide Final Cut Pro Feedback...

• 10 Firefox: How to disable the feature 'the next button is now hidden until that navigate you back'?

  Before moving to Firefox 10, I would like to know how to disable the feature "the next button is now hidden until you navigate back" that has been added to Firefox 10. How to disable this feature so that the next button is always shown?

  OK, so I just figured that if you right-click on the toolbar, select Customize and then put a button between the 'Back/Forward' and the 'address bar' it remove the hidden button front...

  See in my screenshot of http://d.pr/EjrK , where is the home button...
  If I move the button Home elsewhere that hide the next button. http://d.PR/ImFc

• After 9.2 update I can no longer drag to make fast-forward or rewind during playback of the video. I can now only click to jump forwards or backwards in 10 second increments. However, if I stop the video I can then drag to move forward or backward.

  After 9.2 update I can no longer drag to make fast-forward or rewind during playback of the video. I could do those before the update. I can now only click to jump forwards or backwards in 10 second increments. However, if I stop the video I can then drag to move forward or backward. I tried this on Netflix and Hulu with similar results. Apple TV restarting is not to solve the problem.

  Maybe a bug in the new version?  Does anyone else know this?

  Thank you!

  Many people complain when they reach around in the dark watching a movie they press and cause the movie ff or rwd.

  I think that this version tried to improve the situation by requiring the user to press and release the button then slide as formerly.

• No sound on DVD playback and the size can be reduced to half of its original size

  Hi, I have a few problems on my DVD player after you install the windows media player 11.
  No sound during playback and the size can be reduced to half of its original size.

  Can someone show me how to fix tat?

  Hello

  you have a codec pack and/or a DVD player separated installed on your system? If not, then try, because play DVD´s with MediaPlayer 11 is not very comfortable and
  you encounter errors, for example you have.

  I suggest you: download a codec pack (for example K-lite or something: http://www.free-codecs.com/download/Codec_Pack_All_in_1.htm) install it and maybe try to use another dvd as "Media Player Classic" player that plays almost every videofile/DVD/etc. that exist.

  Hope I could help you

  Welcome them

• Z500 Touch is slow video playback of the external HARD disk

  Hello

  I knew video slow reading (more than a minute) drive external HARD on my Lenovo Z500 touch. I used different actors updated (vlc, windows media, Media Player Classic player) who gave the same problem. I have no video experience slow game with multimedia files on the HARD drive inside (less than 15 seconds).

  So, what happens? USB problem?

  Hi ColonelONeill,

  I try to boot my laptop with the power profile high performance. I was surprised to discover that the problem of the slow video playback of the external HARD drive has been resolved. When I double click on the multimedia file, it took my laptop less than 8 seconds to play. So, I does not work using HD tune benchmark.

  Thank you.

• Problem with XNET start VI after the creation of sessions

  I have a timed loop sending CAN messages via XNET screws. It works great, but I always lose the very first message. It matters little, I send the first message immediately after you create the XNET session or after a few milliseconds.

  The attached screenshot shows the initialization of my four sessions XNET. Although I am starting before the session with an XNET start VI, there is without success to get the first message.

  It seems that the sessions/CAN (selectable cards and HS CAN) interfaces are initialized only after the first call to write XNET. XNET write seems to imply XNET start (see documentation), but the appellant XNET start manually after the creation of sessions does not help.

  What I'm missing to get the interfaces online and ready before you send anything?

  I was able to solve this problem because they did not actually XNET screw sorry for this post.

• During playback of the gardens of the time, it freezes

  Original title: games

  during playback of the gardens of the time, it freezes when I try to visit the other sites of friends and it

  Hello

  Step 1:

  Click Start, and then type msconfig in the Search box and then press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or provide confirmation.

  Step 2: Configure selective startup options

  In the System Configuration utility dialog box, click Selective startup on the general tab.

  Click to clear the Load Startup items check box.

  Note the check box use the Boot file is not available.

  Click the Services tab.

  Click to select the hide all Microsoft Services check box.

  Click disable all, and then click OK.

  When you are prompted, click restart.

  b Eddie

• My Windows Media Player 11 won't play, copy or burn one of my CDs, he will see that I have a cd, but it will give me an error message saying that it has encountered an error during playback of the cd in digital mode

  I tried have deleted the cd/dvd drivers and uninstalled and then tried again with a new one, by restarting the computer and who did not seem to work have cleaned the lens in the cd with a cd player! also, I changed the burn speed to see if that would work and nothing!

  Also restored my computer and it didn't solve the problem but I have had this for some time and sometimes it will not work and sometimes it will work I just hope this isn't a big problem one thing I noticed, is that I don't have the thing IMPA you are supposed to have I do not know why and I think that's what it's called. I have also the new driver I have is just a DVD RW and I don't know why looks that can someone please help me!

  I also ran the microsoft fix and he said your driver is unable to write CD's but it does nothing Please HELP THANK YOU SO MUCH!

  Thanks for the reply tim but it was my fault. I discovered that was.in problem device manager choose ata/atapi controllers ide and settings properties.advance then find which channel ata your dvd - rw or cd's and then uncheck the box that refers to the memory.wmp of the cache is now ok, but still curious, no way to change from digital to analog playback on the device tab, as others have said.