XP is connected to the wireless network but can't get online...

Similar Questions

• Connected to the wireless network, but can't see all the networks

  I want to look at the properties of a wireless network that I'm not connected, but I can't do this, because even though I am connected to the Internet, some networks are appearing on the list. Please see the image as an attachment.

  

  Hello Nathaniel,

  Thanks for posting your query on Microsoft Community forum.

  According to the description of the problem, you are connected to internet but cannot see the wireless network through which you are connected. Perhaps, the reason behind this is that some settings get corrupted. Then try below mentioned methods and see if it helps.

  Have you tried to restart the computer and check the status of your problem.

  Try to run in built store and see if it helps you to solve the problem.

  Automated convenience store is a tool that can find and automatically fix problems with your computer. These utilities are not designed to solve all the problems, but they are useful to try because they can often save your time and efforts.

  Run the network troubleshooter utility:

  Try to follow the steps described in the article mentioned below and see if it helps you to solve the problem.

  Why can't I find a wireless network?

  If the problem persists you can try the steps provided by Professor Grim replied on January 19, 2012 in the thread mentioned below.

  No display in Windows 7 64 bit wireless network

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Kind regards

• lapttop connects to the home wireless network but can't get online

  Windows xp sp 3.  connects to network home, but IE cannot make me not online.  Said convenience store couldn't get the proxy settings via the proxy auto configuration mechanism.  the default gateway is in a different subnet as this computer

  Hello

  Take a look at the browser Options and make sure that it is not configured to use the Proxy, or Auto Dettect.

  /Connection tab Options menu/Internet Tools / LAN settings.

  Everything in the settings LAN must be unchecked.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• How can IM connected to the wireless network, but not to the internet, I fix?

  my laptop can no longer connect to the internet, but for the wireless network I can view other computers on the network, but can't go on the internet it says unidentified network.
  I took all the troubleshooting steps to resolve this problem without success.
  all ideas

  Scott,

  Are you the same Scott, I tried to help the last month? If this is you, I left a couple more views. In one of them, I explained that exactly the same problem you encounter happened on my son's computer. I just disabled the router, waited for about ten seconds and he turned his back and that's what it took. I used actually utility of Windows troubleshooting and he advised me to do.

• B110A connects to the wireless network but no PC connection

  Hi Forum,

  I just bought a new HP Photosmart B110A printer range. I got set up with my Belkin wireless router. It is successfully connected. I could set up printing webservice as well. The printer is offline and I could also print a document by sending an email to the email address for the printer configuration. This means that the printer is connected to the wireless network and the internet.

  However, I can not connect to this printer from my PC connected to the same wireless netwrok. When I open the HP Solution Center, it displays the message "disconnected wireless.

  When I connect the printer via USB cable, I am able to connect to the PC and impressions as well fire.

  Can anyone help please?

  Kind regards

  Amol

  Download and run this utility: http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-926&h_lang=en&h_client=s-h-e17-1&h_keyword=dg-NDU&jumpid=ex_r4155/en/hho/ipg/forum/network_diag/

  What did he say?

• My PC is connected to the wireless network, but it is impossible to open any internet page. I went through the diagnosis of Internet Explorer, see below.

  Diagnosis of last run time: 28/01/12 10:16:32 Gateway diagnosis

  Entry door

  Info the following proxy configuration is used by IE: automatically detect settings: enabled Automatic Configuration Script: Proxy Server: Proxy bypass list:

  info could not get the proxy settings via the Proxy Automatic Configuration mechanism

  Info this computer has the following (s) default gateway: 0.0.0.0

  warn that there is no default gateway entry

  repair automatic action: reset the network connection

  action to disable the network card

  activation of the card network action

  successfully activated information network adapter

  Info this computer has the following (s) default gateway: 0.0.0.0

  warn that there is no default gateway entry

  user redirection of information in support of the appeal

  IP layer diagnostic

  Corrupted IP routing table

  prevent the default route is missing or not valid

  Invalid entries in the ARP cache

  action cache ARP has been emptied

  Diagnosis of IP Configuration

  Invalid IP address

  detected info valid IP address: 192.168.0.1

  Wireless diagnosis

  Wireless - Service disabled

  Wireless - user SSID

  required user input action: specify the name of the network or the SSID

  Wireless - first installation

  Info the name of the wireless network (SSID) to which the user wants to connect is IrinaLaptop-router.

  Wireless - Radio

  detected info valid IP address: 192.168.0.1

  Wireless - off limits

  Wireless - hardware problem

  Wireless - Novice user

  Wireless - network Ad - hoc

  Wireless - less preferred

  Wireless - 802. 1 active x

  Wireless - Configuration mismatch

  Wireless - low SNR

  WinSock diagnostic

  WinSock status

  info all base service provider entries are present in the Winsock Catalog.

  channels of information the Winsock Service provider are valid.

  Info entry provider MSAFD Tcpip [TCP/IP] passed the loopback communication test.

  Info entry provider MSAFD Tcpip [UDP/IP] passed the loopback communication test.

  Info entry RSVP UDP Service Provider provider passed the loopback communication test.

  Info entry RSVP TCP Service Provider provider passed the loopback communication test.

  Info connectivity is valid for all Winsock service providers.

  Diagnosis of network adapter

  Network location detection

  Info to help home Internet connection

  Identification of network adapter

  Info network connection: name = connection to the LAN, device = Broadcom 440 x 10/100 Integrated Controller, MediaType = LAN, type = LAN

  Info network connection: name = wireless network connection, Device = Intel (R) PRO/Wireless 3945ABG Network Connection, MediaType = LAN, type = Wireless

  Info network connection: name = 1394 connection, device = 1394 Net Adapter, MediaType = LAN, type = 1394

  Info network connection: name = connection high speed, device = Miniport WAN (PPPOE), MediaType = PPPOE, type = NONE

  Info network connection: name = blank, peripheral = Miniport WAN (PPPOE), MediaType = PPPOE, type = NONE

  Info both Ethernet connections and wireless available, ask the user for selection

  required user input action: select network connection

  Info Wireless connection selected

  State of the network adapter

  Info network connection status: connected

  HTTP, HTTPS, FTP Diagnostic

  HTTP, HTTPS, FTP connectivity

  warn HTTP: error 12007 connecting to www.microsoft.com: the server name or address cannot be resolved

  warn HTTP: error 12007 connecting to www.hotmail.com: the server name or address cannot be resolved

  WARN HTTPS: error 12007 connecting to www.microsoft.com: the server name or address cannot be resolved

  WARN HTTPS: error 12007 connecting to www.passport.net: the server name or address cannot be resolved

  WARN FTP (passive): error 12007 connecting to FTP.Microsoft.com: the server name or address cannot be resolved

  WARN FTP (active): error 12007 connecting to FTP.Microsoft.com: the server name or address cannot be resolved

  error could not make an HTTP connection.

  error could not make an HTTPS connection.

  error could not make an FTP connection.

  I did not want to do this (restore point). However, I found a solution. It comes: http://forums.techguy.org/networking/1029348-network-connection-status-media-disconnected.html

  Where there are two crucial steps (do not know if the two were needed) RUN command (1) netsh int ip reset reset.log and (2) netsh winsock reset catalog
  
  
  After a restart, hey presto my wireless connection was repaired. This seems useful, but not essential (shows wireless performance but not the solution): http://wpc.475a.edgecastcdn.net/0047...etup.1.2.0.exe which is run Xirrus Wi-Fi Inspector 
  Thanks for your time!
  Good bye

• problem connecting to the wireless network, but it worked yesterday.

  Yesterday, I was able to connect to my home wireless network, but not today. I also have a laptop and it connects to my wireless network, there must be something with the RT of Surface.

  Home Wireless works, why can't connect?

  Your post is off-topic in the forum Feedback, I moved it on the forum of "Web and Networking" Windows RT.

• Connected to the local network, but can not use internet

  I recently had problems with access to the internet after reinstalling windows 7. Before the reinstall worked very well.

  I can connect to the local network without problem, and it shows that the internet is connected. Yet I can not access the internet. When I disconnect and reconnect, I get a few seconds of internet work before it stops working.

  When a diagnosis in the network and sharing Center, I get the error "default gateway is not available" and occasionally "the connection between your access point, etc. and internet is broken"

  Other computers and devices using the network are working properly, although there was a 'competitor IP address' error on another pc, which, after a reconnection, solved itself.

  I use an edimax 802.11n wireless card and a D-link router

  I tried several things to make it work again, but without result. Any help would be greatly appreciated

  disable TCP/IPv6 had no effect.

  I think I can have fixed me, I installed the driver microsoft before the reinstall instead of the driver edimax and internet suddenly started working.

  Thanks for the help of yor

• XP SP3 cannot connect to WPA2 wireless network, but can Debian on the same PC.

  I have a Toshiba Portege M200 dual-boot Windows XP Tablet PC Edition with Service Pack 3 installed and Debian GNU/Linux codename Wheezy with Debian non-free package firmware-ipw2x00 allowing my wireless adapter to use and wicd package to manage wireless connections.

  Two operating systems are able to connect to a WPA - PSK network automatically without any problem whatsoever.

  Debian is able to automatically connect to a WPA2-PSK network without any problem, but simply Windows doesn't connect at all.

  Windows shows the WPA2 network in the list of available networks and correctly recognizes as having the WPA2 security.  However, when trying to manually connect, Windows ask me the network key (I have enter), then spend about two minutes «Waiting for network...» "with the usual animation and indefinite progress bar.  Windows back me to the list of available networks window, then shows me not connected to everything as if I didn't choose any.  When waiting for Windows to connect automatically, Windows will sometimes appear a bubble icon connection wireless network saying that it could not connect to one of my favorite networks but that he will continue to try.

  I get no error message or any other message of any kind.  Windows just trying with fanfare and fails silently.

  The two operating systems have updates of installed operating system vendor.

  Someone at - it ideas?

  To give a vision a little to the solution "install a new driver" discussed in the Technet forum thread, it seems that the problem here is the same as that commonly encountered when trying to update printer drivers: a user downloads the new driver and installs it but the problem remains.

  What happens is that if the older driver is not removed all first, it is not replaced by the new driver.

  Windows installs hardware devices using INFs.  They are located in % windir%\inf.  Actually, the previous statement is incomplete.  The first time that a device is installed, Windows uses the INF file to create a corresponding PNF file located in the same directory.  The PNF file is a "precompiled" version of the INF file and Windows Setup actually uses the PNF file because it is "more effective" to do.

  If you download a new driver and replace only the INF file and do not delete the old driver files, when you 'day' the driver, Windows Setup examines the old file PNF which points to the old files and uses.

  Then... either completely uninstall the device or at least delete the PNF file appropriate before attempting to install an updated driver.

  And download the new driver from Toshiba or the manufacturer of the adapter wireless in the computer.  Don't understand from Windows Update.

• can not print says printer connected to the wireless network but pc says printer is offline

  happened before the printer says connected to the network but pc says offline

  Ok

  Have you tried the Network Diagnostics to see you the network can see the printer

  Go to www.hp.com/go/tools

  Network Diagnostics has a link to the wireless printing site that can help out you.

• Connected to the wireless network but no Internet access?

  I recently got a Packard bell easy note laptop ts shows its connected to my wireless connection but when I open Internet explorer, it can not display any web page, anyone know what could be the problem? It connected correctly to my last connection Wireless at home.

  Hi,

  You did changes to the computer, before the show?

  Method 1:

  Run the network troubleshooter, and check.

  Using the troubleshooter from network in Windows 7

  Method 2:

  Consult the following link:

  "Internet Explorer cannot display the webpage" error in Internet Explorer

  Warning: him reset Internet Explorer settings feature might reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

  See also,

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/Ping.mspx?mfr=true

  Note: The link above also applies to Windows 7.

• My HP 5510 is connected to the wireless network, but cannot communicate with the printer?

  I connect a HP all in one Photosmart 5510 to an ATT Uverse wireless network. It says printer is connected and printer tests are all good.., but still when I try to print, I get an error message saying that cannot communicate with the printer, make sure that it is attached to the network?

  I restarted services, restarted..., still the same case. It says its connected, but do not connect or print. Very frustrating...

  What operating system?

  If Windows, download and run this utility: http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-926&h_lang=en&h_client=s-h-e17-1&h_keyword=dg-NDU&jumpid=ex_r4155/en/hho/ipg/forum/network_diag/

  What did he say?

• HP LaserJet 200 colorMFP M276nw connects to my wireless network, but will not recognize the printer

  I am trying to set up my wireless printer, and the printer says its is connected to my wireless network, but I can't get my computer to print wireless if I disconnect my regular network and attach the direct wireless network name, which is different and stops my internet to work. How can I get my computer to recognize the printer on my regular wireless network?

  Hi @lelg,

  I understand that you want to configure the printer on the wireless network. I can help you with this.

  Uninstall the printer software.

  Uninstalling the printer software.

  Restore the default settings of the printer.

  Go to Configuration, restore the default values.

  Cycle power to the router and the computer.

  Run the installer on the printer wireless.

  Go to the configuration, Setup, menu wireless network, Wireless Setup Wizard.

  Print a configuration page to get the IP address of the printer.

  Print a Configuration report.

  Select the method.

  If you have a valid IP address for the printer, then try and access the Web built-in to the printer server. Type the IP address in the address bar of your web browser. (Internet Explorer)

  If it loads the page from the network printer then the printer is on the network.

  Download, save, and then run the installation of the software. Color HP LaserJet Pro 200 pilot M276nw MFPS.

  Select your operating system, click Next and click on the software to download and install.

  Test the printer.

  What operating system do you use? How to find the Windows Edition and the Version on your computer.

  Please provide detailed results if you're still having problems.

  Good day!
  Thank you.

• XP home sp3 can use printer/sp2 vista home premium & files on a network private wireless, but not vice versa. Vista can see xp connected on the entire map, but can not do anything with the icon

  someone on this planet knows!

  XP home sp3 can use printer/sp2 vista home premium & files on a network private wireless, but not vice versa. Vista can see xp connected on the entire map, but can not do anything with the icon (it shows the IP etc. When hovered over with the mouse). tried fix & checked all the rest including the settings found on the masses of internet sites. don't think that this problem is so widespread and not final fix?. someone must know the answer. both computers have norton 360 v6. !. two computers use internet very well through the same network switch. two computers worked flawlessly again, no repairs, no reinstall, not zero other problems ever (always ran 360 and first market backup battery).

  Hello
  I recommend that you search/post this question on the link below:
  http://social.technet.Microsoft.com/search/en-us/?query=networking%20with%20Vista&refinement=112&AC=1
  b Eddie

• Windows Vista detects the wireless network but will not connect to it. Two other users in the same office connect without difficulty.

  The title says it all really.

  I was connected and working normally for about an hour this morning, until suddenly the connection has been lost.
  Windows detects the wireless network but will not connect. Two other users in the same office connect without difficulty.
  Help, please.
  Thank you.
  original title: vista detection network but will not connect

  Hi JulianBeach,

  1. you have made no changes to the computer before the broadcast took place?
  2. What is the exact error message you get?
  3 is connected to the domain of the computer?
  4. what happens when you try to connect to the network?

  Try the steps from the following link:
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Additional information:
  Wireless network card: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/wireless-networking-frequently-asked-questions