My HP 5510 is connected to the wireless network, but cannot communicate with the printer?

Similar Questions

• HP LaserJet 200 colorMFP M276nw connects to my wireless network, but will not recognize the printer

  I am trying to set up my wireless printer, and the printer says its is connected to my wireless network, but I can't get my computer to print wireless if I disconnect my regular network and attach the direct wireless network name, which is different and stops my internet to work. How can I get my computer to recognize the printer on my regular wireless network?

  Hi @lelg,

  I understand that you want to configure the printer on the wireless network. I can help you with this.

  Uninstall the printer software.

  Uninstalling the printer software.

  Restore the default settings of the printer.

  Go to Configuration, restore the default values.

  Cycle power to the router and the computer.

  Run the installer on the printer wireless.

  Go to the configuration, Setup, menu wireless network, Wireless Setup Wizard.

  Print a configuration page to get the IP address of the printer.

  Print a Configuration report.

  Select the method.

  If you have a valid IP address for the printer, then try and access the Web built-in to the printer server. Type the IP address in the address bar of your web browser. (Internet Explorer)

  If it loads the page from the network printer then the printer is on the network.

  Download, save, and then run the installation of the software. Color HP LaserJet Pro 200 pilot M276nw MFPS.

  Select your operating system, click Next and click on the software to download and install.

  Test the printer.

  What operating system do you use? How to find the Windows Edition and the Version on your computer.

  Please provide detailed results if you're still having problems.

  Good day!
  Thank you.

• I can connect to my wireless router, but cannot get internet connectivity via Wireless. If I connect the cable to the port on the router, I get internet connectivity.

  Wireless router / Internet problems

  I am running Windows Vista Home Edition with Security Essentials.  I can connect to my wireless router, but cannot get internet connectivity via Wireless.  If I connect the cable to the port on the router, I get internet connectivity.  Is there a firewall setting that could cause this problem?

  Hello

  Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
  Update your WiFi drivers on computers. How you are positioned in the router? Are there
  obstacles in the path?

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• my printer and computer are both connected to my wireless network, but I can't print documents

  I have a HP Photosmart 6180 and am using Windows Vista.  Both the printer and the computer indicate that they are connected to my wireless network and my computer shows my printer on the network.  When I try to print a document from my computer, nothing prints and printing on my computer says a mistake of the printer.  The printer itself works fine and HP diagnostics indicate that everything is ok.  Any suggestions?

  OK, go to start > Control Panel > printers and delete all instances of the printer.

  Next:

  1. make sure the printer is on and connected to your network. Verify that you can access the printer's internal web page by accessing its IP address before continuing. Get his IP address for a network Test printed on the front of the printer.
  2. click on > start > Control Panel > printers.
  3. click on add a printer
  4. Select local printer
  5. Select create a new port and select Standard TCP/IP Port, and click Next.
  6. under device type, select TCP/IP Device. Under the name of host or IP address, enter the IP address of the printer. Click Next.
  7. Select Hewlett-Packard in the list of manufacturers and select and select your printer model. Click Next.
  If your printer model is not in the list, then select disk provided, browse the CD that came with your HP printer and select the first file begins with hp and ending with INF. click Open, then OK. Select your printer model. Click Next.
  8. If prompted, use the driver that is currently installed.
  9. He will ask the name of the printer - enter a new name or use the one existing. This will be the name of the printer that you select from other applications.
  10. we may ask you to share the printer. Choose No.
  11. the printing area of Test Page is displayed. Go ahead and print it out.
  12. click on finish.

• I can connect to ad hoc networks, but cannot navigate

  I have a compaq laptop with VISTA home SP2 original base. I have can create and connect to ad hoc networks but once established connection, other computers on the network do not appear on my network card, so I can not navigate on their.

  they can see my laptop on their network, but they can't sail too not my camera. It is shown as "inaccessible" on their network

  I activated files and printers, sharing, file sharing and all the options.

  XP and 7 do not have this problem, vista laptop to have this problem

  Please help, I'm frustrated

  Thanks in advance

  Hello santu

  The link below has a multitude of steps that you can use to try to resolve this problem. I hope this helps.

  http://forums.techguy.org/networking/925138-solved-ad-hoc-network-CMPTR.html

• NB200 can connect to wireless networks, but cannot connect to the internet

  I could connect my Win XP netbook to my network wireless secured to the House, other networks and public networks such as the library and McDonald's. This week, I am away from home and discovered that while I can still connect to a number of different wireless networks, I can't connect to the internet with Internet Explorer.

  I had this problem once before and fixed by reinstalling Windows XP and all my other software. I have no idea why it happened again. I'm hoping for a less radical solution to the problem... ?

  Hello

  You can try to renew the IP address.
  Got to RUN and type CMD.
  This would start the console (DOS window)

  Here, you use the command: ipconfig / renew

  It s also advised to update the Wlan driver. I've noticed some problems with older drivers for Wlan
  Here you can get the most recent:
  http://APS2.toshiba-tro.de/WLAN/

  Welcome them

• XP SP3 cannot connect to WPA2 wireless network, but can Debian on the same PC.

  I have a Toshiba Portege M200 dual-boot Windows XP Tablet PC Edition with Service Pack 3 installed and Debian GNU/Linux codename Wheezy with Debian non-free package firmware-ipw2x00 allowing my wireless adapter to use and wicd package to manage wireless connections.

  Two operating systems are able to connect to a WPA - PSK network automatically without any problem whatsoever.

  Debian is able to automatically connect to a WPA2-PSK network without any problem, but simply Windows doesn't connect at all.

  Windows shows the WPA2 network in the list of available networks and correctly recognizes as having the WPA2 security.  However, when trying to manually connect, Windows ask me the network key (I have enter), then spend about two minutes «Waiting for network...» "with the usual animation and indefinite progress bar.  Windows back me to the list of available networks window, then shows me not connected to everything as if I didn't choose any.  When waiting for Windows to connect automatically, Windows will sometimes appear a bubble icon connection wireless network saying that it could not connect to one of my favorite networks but that he will continue to try.

  I get no error message or any other message of any kind.  Windows just trying with fanfare and fails silently.

  The two operating systems have updates of installed operating system vendor.

  Someone at - it ideas?

  To give a vision a little to the solution "install a new driver" discussed in the Technet forum thread, it seems that the problem here is the same as that commonly encountered when trying to update printer drivers: a user downloads the new driver and installs it but the problem remains.

  What happens is that if the older driver is not removed all first, it is not replaced by the new driver.

  Windows installs hardware devices using INFs.  They are located in % windir%\inf.  Actually, the previous statement is incomplete.  The first time that a device is installed, Windows uses the INF file to create a corresponding PNF file located in the same directory.  The PNF file is a "precompiled" version of the INF file and Windows Setup actually uses the PNF file because it is "more effective" to do.

  If you download a new driver and replace only the INF file and do not delete the old driver files, when you 'day' the driver, Windows Setup examines the old file PNF which points to the old files and uses.

  Then... either completely uninstall the device or at least delete the PNF file appropriate before attempting to install an updated driver.

  And download the new driver from Toshiba or the manufacturer of the adapter wireless in the computer.  Don't understand from Windows Update.

• Can not get the new laptop to connect to my wireless network but connects to others

  I have just bought a new laptop Dell Inspiron 1545 to Dell.com and have tried to set up the wireless internet for the past hours. The laptop running Windows Vista Home Basic Edition, & my wireless router is an Apple Airport Extreme Base Station (about 4-5 years). Below is a list of problems / advice I've come across so far:

  (1) when trying to connect to a network, my network don't appears in the list of local networks sporadically even if she lost the signal strength of any nearby wireless signal (I must refresh the list to make it appear sometimes)
  (2) when my network is displayed in the list, it is described as a network that is not secure; There are 2 others that come and go in the list that are also not guaranteed, but I was able to connect through one of them.
  (3) when I try to connect via my network it either says unable to connect immediately or poster progress bar, then after a minute or two, says that it cannot connect.
  -to diagnose the problem, I can exclude is not not in the range of my camera as I tried to connect when I'm 2 feet more far
  -It also says view wireless connections again and try again, but this brings me to the same screen
  -L' diagnostics screen mentions that "the network is"hidden"and is either not in range of this computer or wireless settings on this computer do not match the settings of the network." (is there a setting I'm familiar with that?)
  (4) I checked device drivers and all said that they are working correctly
  (5) I can connect to the internet via a direct connection to the router via a cable ethernet not wireless

  In my view, that it is all the information I can provide about this problem. If you need more information, such as the specifications of the system, let me know where to find them and I will re-post. Thanks in advance for any help provided.

  -Jeremy

  Well, it looks like the old router was the problem. You have a new N Wireless for about $80 as suggested and it works like a charm. At took 5 seconds for your laptop to recognize and connect to it and were without problems since then. Thanks again for the help guys... I hope that I won't bother you again =)

  -Jeremy

• Able to detect the wireless network but cannot connect

  Help, please!

  I have a HP Pavilion DV6 using Windows Vista 64-bit.

  My network wireless adapter intel is able to detect wireless networks three on my College campus.  I know that these networks is currently (I can access it on other devices and my suitemates can view them on their laptops.

  When I double-click a network dialog box appears and informs me that the laptop is currently connected to the network.  After about 30 seconds it says it is unable to connect and an opportunity to try the troubleshooting options (which, alas, never work).  I recently tried to download the latest drivers for the network adapter, but also, it does not work.  The adapter is turned on via the switch on the keyboard and the HP Network Assistant.

  What should I do?

  Hello

  You have a few options in my opinion please try these steps can help you solve your problem.

  (1) unplug the battery adaptor & then press on & press and hold the power button for laptop for 30 seconds then switch on and check if the wireless led lights.

  (2) go to Device Manager then uninstall the drivers wireless network card and restart the device and check if the light is on.

  (3) try to do a system restore to the date where unit was working fine.

  (4) Please update the Bios driver & wireless from the HP website.

  (5) click on start search type Recovery Manager, and then click on it once select Yes on user access control, and then select I need immediate help and then select driver and select request recovery driver wireless and install it and then restart the device.

  (6) If you are comfortable with reinstalling the wireless card that will be on the rear panel of your device you can try this steps as well.

  If you still have the same issue then you need to call HP tech support and get the replaced part.

• Aspire laptop connects to a wireless network, but not another

  First of all, I need to let you know that my home network consists of a Motorola router/modem from my ISP. I have the wireless off, then I use a cat5 ethernet cable to connect a Belkin wireless router, so that I can use the two USB ports on the back for a network storage device to make regular backups on all the pc in the House, and my printer not wireless, so we can print of anyroom home instead of taking the computer back to where the printer is. So about three days ago, I got my Aspire 5734Z-4386 laptop, and I don't have a wireless connection. So I checked my phone, and he always had a relationship with the Belkin. I took ten minutes to troubleshoot the Atheros AR5B93 wireless card. Could not understand why I didn't have a connection, it was great to work for about 12 hours before.

  If for some reason, I used another pc and connected on the Motorola and wireless turned on and immediately the Aspire showed a connection available, I clicked it and it says "connecting" for a few seconds and showed 'internet connection '. I spent about 5 minutes to surf the internet and then disconnected from the Motorola and reconnected to the Belkin, it says "connecting" for about a minute, then came to the yellow triangle, no internet. Back and clikced Motorola, once again the internet connection, but not on the Belkin. So I'm the other pc and checked the Web for the Belkin page to ensure that the Aspire had not been blacklisted in some way, there is nothing here to explain why I can't connect. So I spent three days, the adapter of the uninstall and re - install, I used the Motorola to download the latest driver for the adapter.

  When the Aspire is the Belkin network with the rest of the other pc, I have no problem, move files from and to the Aspire. I can use the Aspire to connect to one of the other pc and right click on a file and copy them to the Aspire and watch the file appear on the Aspire, take the Aspire and copy a file to another pc or use another pc to access the Aspire. But I can't get internet connection, unless I'm on the network from Motorola. Now, I had the wireless on the Motorola off so all attached devices would be on the same network, then we can share files, and other connected activities.

  I will admit that I am totally confused, it's not logical at all. I mean if someone else told me that their computer did this, I would have told them "it's impossible". Engineering wise, wise technology it not is not possible for an adapter do what made mine. But he does. Can someone please help me understand what is happening and how to fix it? I don't often admit defeat, but this time I've been beaten almost to death.

  Have you tried to reboot the router?

• My office will connect to other wireless networks but not my own.

  original title: the internet disorder

  everything in my house is my internet running at home, but for some reason, my desktop connects to the internet outside but not my internet has the House that I don't know what to do?

  Hello

  I suggest to refer to this link and follow the instructions in the link below and check, if this can help:

  http://Windows.Microsoft.com/en-us/Windows/help/network-connection-problems-in-Windows?T1=Tab03

  It will be useful.

• Cisco ipsec Vpn connects but cannot communicate with lan

  I have a version of cisco 1921 15.2 (4) M3 I install vpn ipsec and may have customers to connect but cannot ping anything inside.  A glimpse of what could be wrong with my config would be greatly appreciated.  I posted the configuration as well as running a few outings of ipsec.  I also tried with multiple operating systems using cisco vpn client and shrewsoft.  I am able to connect to the other VPN ipsec running 1921 both of these computers by using a client.

  Thanks for any assistance

  SH run

  !
  AAA new-model
  !
  !
  AAA authentication login radius_auth local radius group
  connection of AAA VPN_AUTHEN group local RADIUS authentication
  AAA authorization network_vpn_author LAN
  !
  !
  !
  !
  !
  AAA - the id of the joint session
  clock timezone PST - 8 0
  clock to summer time recurring PST
  !
  no ip source route
  decline of the IP options
  IP cef
  !
  !
  !
  !
  !
  !
  no ip bootp Server
  no ip domain search
  domain IP XXX.local
  inspect the high IP 3000 max-incomplete
  inspect the low IP 2800 max-incomplete
  IP inspect a low minute 2800
  IP inspect a high minute 3000
  inspect the IP icmp SDM_LOW name
  inspect the IP name SDM_LOW esmtp
  inspect the tcp IP SDM_LOW name
  inspect the IP udp SDM_LOW name
  IP inspect name SDM_LOW ssh
  No ipv6 cef
  !
  Authenticated MultiLink bundle-name Panel
  !
  !
  Crypto pki trustpoint TP-self-signed-2909270577
  enrollment selfsigned
  name of the object cn = IOS - Self - signed - certificate - 2909270577
  revocation checking no
  rsakeypair TP-self-signed-2909270577
  !
  !
  TP-self-signed-2909270577 crypto pki certificate chain
  certificate self-signed 01
  license udi pid CISCO1921/K9 sn FTX1715818R
  !
  !
  Archives
  The config log
  Enable logging
  size of logging 1000
  notify the contenttype in clear syslog
  the ADMIN_HOSTS object-group network
  71.X.X.X 71.X.X.X range
  !
  name of user name1 secret privilege 15 4 XXXXXXX

  !
  redundancy
  !
  !
  !
  !
  !
  property intellectual ssh time 60
  property intellectual ssh authentication-2 retries
  property intellectual ssh event logging
  property intellectual ssh version 2
  !
  !
  crypto ISAKMP policy 1
  BA 3des
  preshared authentication
  Group 2
  !
  ISAKMP crypto client configuration group roaming_vpn
  key XXXXX
  DNS 192.168.10.10 10.1.1.1
  XXX.local field
  pool VPN_POOL_1
  ACL client_vpn_traffic
  netmask 255.255.255.0
  !
  !
  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
  tunnel mode
  !
  !
  !
  crypto dynamic-map VPN_DYNMAP_1 1
  Set the security association idle time 1800
  game of transformation-ESP-3DES-SHA
  market arriere-route
  !
  !
  list of authentication of card crypto SDM_CMAP_1 client VPN_AUTHEN
  map SDM_CMAP_1 isakmp authorization list network_vpn_author crypto
  client configuration address map SDM_CMAP_1 crypto answer
  map SDM_CMAP_1 65535-isakmp dynamic VPN_DYNMAP_1 ipsec crypto
  !
  !
  !
  !
  !
  the Embedded-Service-Engine0/0 interface
  no ip address
  Shutdown
  !
  interface GigabitEthernet0/0
  IP 76.W.E.R 255.255.255.248
  IP access-group ATT_Outside_In in
  no ip redirection
  no ip unreachable
  no ip proxy-arp
  NAT outside IP
  inspect the SDM_LOW over IP
  IP virtual-reassembly in
  load-interval 30
  automatic duplex
  automatic speed
  No cdp enable
  No mop enabled
  map SDM_CMAP_1 crypto
  !
  interface GigabitEthernet0/1
  no ip address
  load-interval 30
  automatic duplex
  automatic speed
  !
  interface GigabitEthernet0/1.10
  encapsulation dot1Q 1 native
  IP 192.168.10.1 255.255.255.0
  no ip redirection
  no ip unreachable
  no ip proxy-arp
  property intellectual accounting-access violations
  IP nat inside
  IP virtual-reassembly in
  !
  interface GigabitEthernet0/1.100
  encapsulation dot1Q 100
  10.1.1.254 IP address 255.255.255.0
  no ip redirection
  no ip unreachable
  no ip proxy-arp
  IP nat inside
  IP virtual-reassembly in
  !
  interface GigabitEthernet0/1,200
  encapsulation dot1Q 200
  IP 10.1.2.254 255.255.255.0
  no ip redirection
  no ip unreachable
  no ip proxy-arp
  IP nat inside
  IP virtual-reassembly in
  IP tcp adjust-mss 1452
  !
  local IP VPN_POOL_1 192.168.168.193 pool 192.168.168.254
  IP forward-Protocol ND
  !
  IP http server
  IP http authentication aaa-authentication of connection ADMIN_AUTHEN
  IP http secure server
  IP http timeout policy slowed down 60 life 86400 request 10000
  !
  IP nat inside source map route ATT_NAT_LIST interface GigabitEthernet0/0 overload
  IP nat inside source static tcp 192.168.10.10 25 expandable 25 76.W.E.R
  IP nat inside source static tcp 192.168.10.10 80 76.W.E.R 80 extensible
  IP nat inside source static tcp 192.168.10.10 76.W.E.R expandable 443 443
  IP nat inside source static tcp 192.168.10.10 76.W.E.R expandable 987 987
  IP route 0.0.0.0 0.0.0.0 76.W.E.F
  !
  ATT_Outside_In extended IP access list
  permit tcp object-group ADMIN_HOSTS any eq 22
  allow any host 76.W.E.R eq www tcp
  allow any host 76.W.E.R eq 443 tcp
  allow 987 tcp any host 76.W.E.R eq
  allow any host 76.W.E.R eq tcp smtp
  permit any any icmp echo response
  allow icmp a whole
  allow udp any any eq isakmp
  allow an esp
  allow a whole ahp
  permit any any eq non500-isakmp udp
  deny ip 10.0.0.0 0.255.255.255 everything
  deny ip 172.16.0.0 0.15.255.255 all
  deny ip 192.168.0.0 0.0.255.255 everything
  deny ip 127.0.0.0 0.255.255.255 everything
  refuse the ip 255.255.255.255 host everything
  refuse the host ip 0.0.0.0 everything
  NAT_LIST extended IP access list
  IP 10.1.0.0 allow 0.0.255.255 everything
  permit ip 192.168.10.0 0.0.0.255 any
  deny ip 192.168.10.0 0.0.0.255 192.168.168.192 0.0.0.63
  refuse the 10.1.1.0 ip 0.0.0.255 192.168.168.192 0.0.0.63
  deny ip 10.1.2.0 0.0.0.255 192.168.168.192 0.0.0.63
  client_vpn_traffic extended IP access list
  permit ip 192.168.10.0 0.0.0.255 192.168.168.192 0.0.0.63
  ip licensing 10.1.1.0 0.0.0.255 192.168.168.192 0.0.0.63
  IP 10.1.2.0 allow 0.0.0.255 10.1.1.0 0.0.0.255
  !
  radius of the IP source-interface GigabitEthernet0/1.10
  Logging trap errors
  logging source hostname id
  logging source-interface GigabitEthernet0/1.10
  !
  ATT_NAT_LIST allowed 20 route map
  corresponds to the IP NAT_LIST
  is the interface GigabitEthernet0/0
  !
  !
  SNMP-server community [email protected] / * /! s RO
  Server enable SNMP traps snmp authentication linkdown, linkup warmstart cold start
  Server enable SNMP traps vrrp
  Server SNMP enable transceiver traps all the
  Server enable SNMP traps ds1
  Enable SNMP-Server intercepts the message-send-call failed remote server failure
  Enable SNMP-Server intercepts ATS
  Server enable SNMP traps eigrp
  Server enable SNMP traps ospf-change of State
  Enable SNMP-Server intercepts ospf errors
  SNMP Server enable ospf retransmit traps
  Server enable SNMP traps ospf lsa
  Server enable SNMP traps ospf nssa-trans-changes state cisco-change specific
  SNMP server activate interface specific cisco-ospf traps shamlink state change
  SNMP Server enable neighbor traps cisco-specific ospf to the State shamlink change
  Enable SNMP-Server intercepts specific to cisco ospf errors
  SNMP server activate specific cisco ospf retransmit traps
  Server enable SNMP traps ospf cisco specific lsa
  SNMP server activate license traps
  Server enable SNMP traps envmon
  traps to enable SNMP-Server ethernet cfm cc mep-top low-mep Dispatcher loop config
  Enable SNMP-Server intercepts ethernet cfm overlap missing mep mep-unknown service-up
  Server enable SNMP traps auth framework sec-violation
  Server enable SNMP traps c3g
  entity-sensor threshold traps SNMP-server enable
  Server enable SNMP traps adslline
  Server enable SNMP traps vdsl2line
  Server enable SNMP traps icsudsu
  Server enable SNMP traps ISDN call-information
  Server enable SNMP traps ISDN layer2
  Server enable SNMP traps ISDN chan-not-available
  Server enable SNMP traps ISDN ietf
  Server enable SNMP traps ds0-busyout
  Server enable SNMP traps ds1-loopback
  SNMP-Server enable traps energywise
  Server enable SNMP traps vstack
  SNMP traps enable mac-notification server
  Server enable SNMP traps bgp cbgp2
  Enable SNMP-Server intercepts isis
  Server enable SNMP traps ospfv3-change of State
  Enable SNMP-Server intercepts ospfv3 errors
  Server enable SNMP traps aaa_server
  Server enable SNMP traps atm subif
  Server enable SNMP traps cef resources-failure-change of State peer peer-fib-state-change inconsistency
  Server enable SNMP traps memory bufferpeak
  Server enable SNMP traps cnpd
  Server enable SNMP traps config-copy
  config SNMP-server enable traps
  Server enable SNMP traps config-ctid
  entity of traps activate SNMP Server
  Server enable SNMP traps fru-ctrl
  SNMP traps-policy resources enable server
  Server SNMP enable traps-Manager of event
  Server enable SNMP traps frames multi-links bundle-incompatibility
  SNMP traps-frame relay enable server
  Server enable SNMP traps subif frame relay
  Server enable SNMP traps hsrp
  Server enable SNMP traps ipmulticast
  Server enable SNMP traps msdp
  Server enable SNMP traps mvpn
  Server enable SNMP traps PNDH nhs
  Server enable SNMP traps PNDH nhc
  Server enable SNMP traps PNDH PSN
  Server enable SNMP traps PNDH exceeded quota
  Server enable SNMP traps pim neighbor-rp-mapping-change invalid-pim-message of change
  Server enable SNMP traps pppoe
  Enable SNMP-server holds the CPU threshold
  SNMP Server enable rsvp traps
  Server enable SNMP traps syslog
  Server enable SNMP traps l2tun session
  Server enable SNMP traps l2tun pseudowire status
  Server enable SNMP traps vtp
  Enable SNMP-Server intercepts waas
  Server enable SNMP traps ipsla
  Server enable SNMP traps bfd
  Server enable SNMP traps gdoi gm-early-registration
  Server enable SNMP traps gdoi full-save-gm
  Server enable SNMP traps gdoi gm-re-register
  Server enable SNMP traps gdoi gm - generate a new key-rcvd
  Server enable SNMP traps gdoi gm - generate a new key-fail
  Server enable SNMP traps gdoi ks - generate a new key-pushed
  Enable SNMP traps gdoi gm-incomplete-cfg Server
  Enable SNMP-Server intercepts gdoi ks-No.-rsa-keys
  Server enable SNMP traps gdoi ks-new-registration
  Server enable SNMP traps gdoi ks-reg-complete
  Enable SNMP-Server Firewall state of traps
  SNMP-Server enable traps ike policy add
  Enable SNMP-Server intercepts removal of ike policy
  Enable SNMP-Server intercepts start ike tunnel
  Enable SNMP-Server intercepts stop ike tunnel
  SNMP server activate ipsec cryptomap add traps
  SNMP server activate ipsec cryptomap remove traps
  SNMP server activate ipsec cryptomap attach traps
  SNMP server activate ipsec cryptomap detach traps
  Server SNMP traps enable ipsec tunnel beginning
  SNMP-Server enable traps stop ipsec tunnel
  Enable SNMP-server holds too many associations of ipsec security
  Enable SNMP-Server intercepts alarm ethernet cfm
  Enable SNMP-Server intercepts rf
  Server enable SNMP traps vrfmib vrf - up low-vrf vnet-trunk-up low-trunk-vnet
  Server RADIUS dead-criteria life 2
  RADIUS-server host 192.168.10.10
  Server RADIUS 2 timeout
  Server RADIUS XXXXXXX key
  !
  !
  !
  control plan
  !
  !

  Line con 0
  privilege level 15
  connection of authentication radius_auth
  line to 0
  line 2
  no activation-character
  No exec
  preferred no transport
  transport of entry all
  transport output pad rlogin lapb - your MOP v120 udptn ssh telnet
  StopBits 1
  line vty 0 4
  privilege level 15
  connection of authentication radius_auth
  entry ssh transport
  line vty 5 15
  privilege level 15
  connection of authentication radius_auth
  entry ssh transport
  !
  Scheduler allocate 20000 1000
  NTP-Calendar Update
  Server NTP 192.168.10.10
  NTP 64.250.229.100 Server
  !
  end

  Router ipsec crypto #sh her

  Interface: GigabitEthernet0/0
  Tag crypto map: SDM_CMAP_1, local addr 76.W.E.R

  protégé of the vrf: (none)
  local ident (addr, mask, prot, port): (0.0.0.0/0.0.0.0/0/0)
  Remote ident (addr, mask, prot, port): (192.168.168.213/255.255.255.255/0/0)
  current_peer 75.X.X.X port 2642
  LICENCE, flags is {}
  #pkts program: 1953, #pkts encrypt: 1953, #pkts digest: 1953
  #pkts decaps: 1963, #pkts decrypt: 1963, #pkts check: 1963
  compressed #pkts: 0, unzipped #pkts: 0
  #pkts uncompressed: 0, #pkts compr. has failed: 0
  #pkts not unpacked: 0, #pkts decompress failed: 0
  Errors #send 0, #recv 0 errors

  local crypto endpt. : 76.W.E.R, remote Start crypto. : 75.X.X.X
  Path mtu 1500, mtu 1500 ip, ip mtu IDB GigabitEthernet0/0
  current outbound SPI: 0x5D423270 (1564619376)
  PFS (Y/N): N, Diffie-Hellman group: no

  SAS of the esp on arrival:
  SPI: 0x2A5177DD (709982173)
  transform: esp-3des esp-sha-hmac.
  running parameters = {Tunnel UDP-program}
  Conn ID: 2115, flow_id: VPN:115 on board, sibling_flags 80000040, crypto card: SDM_CMAP_1
  calendar of his: service life remaining (k/s) key: (4301748/2809)
  Size IV: 8 bytes
  support for replay detection: Y
  Status: ACTIVE (ACTIVE)

  the arrival ah sas:

  SAS of the CFP on arrival:

  outgoing esp sas:
  SPI: 0x5D423270 (1564619376)
  transform: esp-3des esp-sha-hmac.
  running parameters = {Tunnel UDP-program}
  Conn ID: 2116, flow_id: VPN:116 on board, sibling_flags 80000040, crypto card: SDM_CMAP_1
  calendar of his: service life remaining (k/s) key: (4301637/2809)
  Size IV: 8 bytes
  support for replay detection: Y
  Status: ACTIVE (ACTIVE)

  outgoing ah sas:

  outgoing CFP sas:

  Routing crypto isakmp #sh its
  IPv4 Crypto ISAKMP Security Association
  DST CBC conn-State id
  76.W.E.R 75.X.X.X QM_IDLE 1055 ACTIVE

  IPv6 Crypto ISAKMP Security Association

  

  

  In your acl, nat, you will need to refuse your VPN traffic before you allow the subnet at all. Just put all the declarations of refusal before the declarations of licence.

  Sent by Cisco Support technique iPhone App

• When I try to connect to my wireless network, that it asks a security key how do I find the key my router is a comtrend CT-5363

  When I try to connect to my wireless network, that it asks a security key how do I find the key my router is a comtrend CT-5363

  Hello

  1. what operating system do you use?

  2 did you change on your computer?

  3. who is your internet service provider?

  If you use windows7, I suggest you to follow the steps from the links and check out.

  Set up a wireless router

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-wireless-router

  Network connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  Set up a security key for a wireless network

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-security-key-for-a-wireless-network

• I get my connection wizard of wireless network to work when I get the RunDLL error "an exception occurred while trying to run"wzcdlg.dll, FlashConfigCreateNetwork"

  Original title: wireless network connection wizard does not work

  How can I get my connection wizard of wireless network to work when I get the RunDLL error "an exception occurred while trying to run 'wzcdlg.dll, FlashConfigCreateNetwork' I can see no wireless connections more.  Not sure why all of a sudden it stopped working.  Thank you!

  Hi ChadWilliams_1974,

  Try the following methods:

  Method 1: Try the steps from the link.

  Troubleshooting network connection problems:

  http://www.Microsoft.com/windowsxp/using/networking/maintain/troubleshoot.mspx#3

  Method 2: Reset TCP/IP Protocol, you can run the fix it from the link below and check if the problem is resolved.

  How to reset the Protocol Internet (TCP/IP)

  http://support.Microsoft.com/kb/299357

  I hope this helps.

• When you try to connect to a wireless network I get this error: "If you want Windows to configure this connection, start the Wireless Zero Configuration service.

  original title: WiFi

  I want to connect to a wireless network on my laptop. When I go to the page of networks wirelss under the "choose a wireless network" it says "Windows cannot configure this wireless connection. If you want Windows to configure this connection, start the automatic Wireless Configuration service. My other laptop does not, and I don't know how to make the wireless network options appear. Any help is appreciated!

  Hi AshleyHenley,

  1. Did you the latest changes on the computer?
  2. When was the last time it was working fine?
  3. You have security software installed on the computer?

  See the article and run the Fixit tool available, check if it helps.

  Error message when you try to run the Network Setup Wizard update for Windows XP Service Pack 2, Service Pack 3, or Windows XP Tablet PC 2005 Edition wireless

  http://support.Microsoft.com/kb/871122

  How to troubleshoot wireless network connections in Windows XP Service Pack 2

  http://support.Microsoft.com/kb/870702