XP mode-not applicable

Similar Questions

• Cannot install XP Mode (this update is not applicable to your computer)

  Hello

  I am trying to download Windows XP mode to my laptop Windows 7 Professional. When I try to run the "Windows Validation' (WindowsActivationUpdate.exe) reads:"this update is not applicable to your computer"I spent the other Microsoft validation tools, but not one that is an"update ". If I try to display the update in Control Panel to uninstall, it and any other update is listed. What continues?

  Thank you, Cam.

  Hey prince1217,

  You have a 32-bit version or 64-bit Windows 7?

  Check the information by following the steps outlined in the article below.

  My PC running the 32-bit version or 64-bit Windows?

  Please make sure that you selected the correct version of this link: http://www.microsoft.com/windows/virtual-pc/download.aspx

  Once this is done, follow the instructions in this article to help with the installation of Windows XP mode.

  Install and use Windows XP Mode in Windows 7

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• KB977206: this update is not applicable to your computer.

  I tried to install Windows xp mode in my windows 7 PC. I installed Windows xp and virtual PC, and then kb977206 to installation mode on the pc without hardware virtualization. But it throws the error message indicating that my computer is not applicable for this update. What should do? technology trends

  AdBar,
  Did you go in the "Resolution" section of KB977206?  If not, go through that and run the detection tool of HAV and post back with the results.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Servicing identified that package KB972036 (Update) is not applicable to this system

  How can I get rid of this update? I find only information for the installation of updates failed, nothing on the automatic reception of an update through Windows Update that is not valid for my system.

  Windows Vista Home Pemium Service Pack 2
  HP Pavilion DV6700
  Microsoft Office is NOT installed, only the viewers

  "Windows Servicing identified that package KB972036 (Update) is not applicable to this system"

  "Windows Servicing has not finished the process of change update 972036-11_neutral_LDR of State of Staged (Staged) packaging KB972036 (Update)"

  Log name: System
  Source: Microsoft-Windows-maintenance
  Date: 2009-09-02 10:52:50
  Event ID: 4375
  Task category: no
  Level: error
  Keywords: Classic
  User: T24622056-PC\Alan
  Computer: T24622056-PC
  Description:
  Windows Servicing failed to complete the process of the package configuration KB972036 (Update) in install Requested(Install Requested) State
  The event XML:
  
   
     
      4375
      0
      2
      0
      0
      0 x 80000000000000
     
      103100
     
     
      System
      T24622056-PC
     
   
   
     
        KB972036
        Update
        Install requested
        Package_for_KB972036 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.2.0
        Installed
        True
        0 x 80070643
        Fake
       
       
     
   
  

  Hi BrechbieIAD,

  Welcome to Microsoft Vista answers Forum!

  I have a few here that might solve the problem.

  Step 1:

  You may need to start the computer in safe mode and uninstall the update, follow these steps to start the computer in safe mode:

  1 restart your computer if it is running.

  2. tap on the F8 key after your initially on powers computer.

  3. Once you see the menu Advanced Boot Options, you can stop tapping.

  4. use the up/down arrow keys to highlight your selection.

  5. Select Mode safe mode with networking and press ENTER.

  6. you should see loading drivers and wait please.

  7. you should then be at the Welcome screen.

  8. connect to your computer using an account with administrator privileges.

  See the link: http://windowshelp.microsoft.com/Windows/en-US/help/323ef48f-7b93-4079-a48a-5c58eec904a11033.mspx

  Step 2:

  Now, you may need to delete the contents of the download on your system folder, follow these steps:

  Click Start > type download in the start search > delete the folder KB972036.

  Step 3:

  Now, run Windows Update and allow to install KB972036.

  After Windows Update has finished reboot normally and everything should be fixed.

  Hope this information is useful.
  Let me know if it worked.
  All the best!

  Thank you, and in what concerns:
  Swathi B - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error for KB974674 "update is not applicable to your computer"

  Actual title: KB974674 installation problems

  I tried to install KB974674 on my new HP laptop under Windows 7 Home Premium to allow me to back up data from my old XP PC but got the message that the update is not applicable to your computer. Unlike others with this problem, the data are English to English. No reason for the message and how I can make my backup?

  Hello

  -What is the exact error that you receive when trying to install updates?
  -You are aware of any changes made on the computer before this problem?
   
  Method 1: I suggest trying to install the patch and also to try the steps mentioned in step 2 in the " WORKAROUND " section from the link mentioned below to check if the number perissts.
  Restore description of the backup of Windows NT to Windows 7 and Windows Server 2008 R2
  http://support.Microsoft.com/kb/974674
   
  Method 2: Clean Boot Mode
  I suggest to keep the computer in clean boot mode and try to install the updates then check if the problem persists.
  A clean boot to check if startup item or services to third-party application is causing this issue.
  You can read the following article to configure the computer to boot:
  http://support.Microsoft.com/kb/929135
  Note: After the troubleshooting steps, see the link to start to set up the computer in normal clean startup mode.
   
  For reference:
  Problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-installing-updates
   
  Hope this information helps.

• Not applicable to my pc fix

  Why patch

  https://support.Microsoft.com/en-us/hotfix/KBHotfix?kbnum=976443&kbln=en-us

  not applicable to my pc

  I have Windows 7 Ultimate x 64

  How can I install it?

  Hello

  Try running the fixit in administrator mode. If the problem persists, try running it in compatibility mode and see if it helps. To run the application in compatibility mode, you can see the article mentioned below and see if it helps.

  Make older programs in this version of Windows

  Keep us.

  Kind regards

• 3051 a J611 series: Wireless IP address question NOT APPLICABLE

  I lists only the complications I see, do not hesitate to ask for more information. I have been through troubleshooting, all services, reset the printer has been added manually and constantly appears in the allowed list of MAC. Even hear that someone else had this problem would be a relief as I saw nothing indicating past connectivity fail problem.

  The wireless test page results as follows:

  DIAGNOSTIC RESULTS

  > Connectitivity

  -Does not work

  > settings

  -No filtering Fail

  -Channel not working

  CURRENT CONFIGURATION
  -IP address not applicable

  -Configuration not applicable Source

  Hi @mlamkin,

  Welcome to the HP Forums!

  I understand that you have problems with your HP Deskjet 3051 a J611 series printer connection. I'm happy to help you!

  To get help, I'll need some more information:

  • If you use Windows or operating system Mac and the version number. To find the exact version, visit this link. Whatsmyos.
  • If the power cable is connected to a surge protector, or directly to a wall outlet. Questions when it is connected to an uninterruptible power supply/Strip/surge protector power. This is true for printers and ink jet.

  If you are using Windows, please try our HP print and Scan Doctor.

  Also, I recommend this site, HP Wireless Printing Center - Troubleshooting.

  Thank you for posting!

• Mode not available on my iWatch bedside table

  Mode not available bedside table

  Hello

  You may need to update the software on your watch (mode of bedside table is available under watch OS 2 and later versions):

  - Update the software on your Apple Watch - Apple Support

  To enable or disable the mode of the bedside table:

  -On your iPhone, in the application of the watch, go to My Watch (tab) > General > bedside table Mode.

  To use the bedside table:

  • Connect your watch to its charger (with power connected) or connect it to a magnetic charging Dock Apple Watch:
    • Place your watch on the side with the buttons facing up.
  • To see the time, tap the screen or slightly shift your watch:
    • When the watch is in this mode, pushing even your bedside table may suffice.
  • If you also set an alarm with the alarm clock app on your watch, it will warn you at the specified time.

  More information:

  Use the mode table bedside on your Apple Watch - Apple Support

• Satellite A100-775 wake mode not sleep by call or fax

  "Nine" Satellite A100-775 (core 2 dual multiprocessor) wakes up mode not sleep by call or fax (ISDN Controller):
  AVM FRITZ! X USB with corresponding power management features).

  BIOS and software patches are up-to-date, motherboard already changed by Toshiba service.
  Devive Manager is no 'power management' tab of this network adapter. In addition, standby and hibernation work generally.

  On my Satellite 1110 everything works fine.
  What is a special problem with DC or something else?

  Post edited by: Kykladen

  Hi everyone out there!

  No idea of the outside world? It might be a problem with the State of the power to the laptop:
  Satellite goes to previous day "S3" so that my old laptop uses "S1". I tried - unsuccessfully - to force the
  "S1" to the level of the dumppo.exe utitilty and I am now using a Hubv (self powered) USB root 'active', but: zero. "."
  All the ideas in the world?

  Thank you!

  Hello

  Unfortunately I have no much experience with fax and I don't use AVM Fritz! X USB but I can you recommend to check the properties of the USB device and see if option called allow this device to wake the computer from the mode standby on the property power management dialog box in Device Manager is enabled.

• "This update is not applicable to your computer"

  OT: CVE-2015-1635.

  Hi all

  I get an error message when I try to install the security Windows8.1 patch - KB3042553-x 64.msu on my Windows 2012 R2 server. Can you please help.

  "This update is not applicable to your computer"

  I downloaded the patch from the Microsoft Download Center. My server configuration is:

  Server Windows 2012 R2 (64-bit)

  Thank you

  This issue is beyond the scope of this site and must be placed on Technet or MSDN
  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• When I start my pc the monitor reads "mode not supported".

  unplugged my pc & MONITOR. When I plugged it back in & has tried to start it, it keeps reading 'mode not supported '.

  Hello!

  The pc is probably set to a resolution that does not support the monitor. Start in safe mode and set the resolution to the native wreck of monitors.

  To start in safe mode, you will need to press F8 at the moment of startup and select Safe mode.

  Let me know if that is not the case.

  Kind regards

  Joel

• Windows 7 - KB976264 indicates 'not applicable' to my computer

  After reading the update of Windows 7 x 64 to improve existing at this URL compatibility,http://support.microsoft.com/KB/976264 , I downloaded the Windows 7 x 64 bit compatibility update KB/976264, and when I tried to execute the file to update on my PC Windows 7 64 bit Home Premium it produces a dialog box saying "this update is not applicable to your computer. I checked the list of updates that are currently installed for the number 976264 and it is not there. Then, I went to Windows Update and check for updates available and there is only a list, such as an update of the .NET Framework. If this update is for Win7-64 as shown, and I have not installed it, why I can not install it? I have several legacy applications, I would try to start. Note that I just did a fresh install of Windows 7-64, about a week ago and have barely used the PC at all.

  Hello

  Windows Update offers you updates that are applicable to your computer or required to keep up-to-date. You have applications or games listed in the article for this update to be offered. Check out the list and let us know if this is the case.

  In addition, this update is not the only way to run incompatible programs. You can run the troubleshooter for compatibility to run incompatible applications and games. Follow the link below for more information on the resolution of compatibility issues.

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I change the video display Mode when the monitor mode not supported?

  While creating my new monitor, I changed the computer video display mode at 120 Hz by accident.  Now I see something on the monitor other than the words not taken in CHARGE the MODE.

  My system is a new HP Pavilion p7-1423W running Windows 8.1 with Intel i5-2320 3 ghz

  I tried the start mode by pressing ESC on power but do not help the startup options.  And the just F11 menu option makes the startup screen disapear and puts the monitor mode not supported.  Tapping F8 doen't work and tapping F12 just puts me in the bios menus that do not help.

  How can I upgrade the video card integrated with a video mode that is supported when I can't see the screen?

  I answer my own question because I found my solution, thanks to my grandson (freshman to Renselear Politech).

  I shoot to buy a monitor that displays a refresh rate of 120, so I could put my rear view.

  Here is the solution.

  My computer double exit DVI.  My grandson told me to connect my new monitor to the other output because the output does not get touched when I changed the original mode of production.  He has worked and is automatically selects the default monitors mode.  Then I've reconfigured the original output using the integrated display software. Solved!

• After installing the updates, event viewer says "Some of the updates are not applicable for this system"

  I have a laptop Toshiba Satellite L355D-57901.  I am running Windows Vista Home Premium SP2.  I have the updatedWindows updates in place so that I can revisit before installing.  After you install the updates, I noticed for some time that when I check myEvent Viewer , there are several errors indicating that "Windows Servicing identified that package (the number of update i.e. KB980436 (security update) is not applicable to this system .).   Can you please tell me why?  Thank you very much.

  Hi Simply4real,

  Check out the link below to a thread with similar problem and check if it helps.

  http://social.technet.Microsoft.com/forums/en-us/itprovistasetup/thread/c6883a0c-FF12-4bcd-86e0-4af3006eb7ce/

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• While im trying to install WMP 11 in my starter of windows 7 there is an error saying that "UPDATE IS NOT APPLICABLE to ONE COMPUTER"... Why is it so?

  Problem:

  When installing wmp 11, I encounter an error saying that the update is not applicable to your computer... can someone help me with this problem?

  Unless it's a computer N Win7 or NK, WMP 12 is already installed on your new computer, Judd. To enable access to WMP 12 (turn it on), see http://windows.microsoft.com/en-us/windows7/Turn-Windows-features-on-or-off ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft