3051 a J611 series: Wireless IP address question NOT APPLICABLE

Similar Questions

• HP Deskjet 3050 has J611 series watch in trouble with wireless printing

  Hey there,

  I have just a series of combat a HP Deskjet 3050 printer a J611 and wireless printing to work perfectly. However, for the last week or so is no more.

  The printer is connected to the network, as the result of the wireless network test is proven and it is the same network that the laptop is connected to. I have already uninstalled and reinstalled the software. The wireless light is on and I can see the signal strength and the IP address. However, it still works.

  I also I sent an email to the printer to see if it worked. Initially, I received an automated email saying my printer is not connected to the internet and then printing will be delayed. I didn't touch the printer after that, but about 6 hours later it started to print.
  I also tried to connect the printer with a USB key and configure settings wireless via USB does not work either. The computer cannot find a printer connected to the network. There is no firewall blocking the application or the printer.

  My settings:

  Router broadband wireless ADSL2 + -.
  Huawei EchoLife HG521
  TalkTalk
  Laptop - Medion Akoya E7214
  32-bit operating system
  Windows 7 Home Premium

  Help with this would be much appreciated! Thank you!

  Larissa

  I doubt disturbed the other printer.  Kaspersky can be a problem, but we're going to explore other things first.

  We will set an IP address of the printer:

  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') 250
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the gateway.
  -Enter for the first DNS 8.8.8.8 and 8.8.4.4 for second DNS.
  -Click 'apply '.

  Now, stop the router and printer, start the router, wait, and then start printing.

  After that, you will have to redo 'Add printer' using the new IP address.

• HP Deskjet 3051 a J611: help with Windows 10 drivers? Incompatibility problem?

  Hello, I had to get help with a problem with my printer HP Deskjet 3051 a J611.

  I was always able to properly scan using my printer until I installed the update for Windows 10.

  I use a Sony VAIO computer Fit portable (may 2013 model) originally shipped with Windows installed Pro 8.1.

  After I installed Windows 10 and I tried to use my scanner two weeks later (it prints very well), I can't seem to use the same program I was using before 10 Windows to use my scanner. I tried to use printing HP and doctor Scan to fix my problem, and he told me that my printer had an unknown driver error that it could not solve. I also tried to reset my laptop (and power cycling the printer) and to uninstall and reinstall the driver for my printer.

  One thing to note: I use my printer using the wireless and wired (via USB), Wi - Fi for the scanner and the printer.

  I usually use the printer function when I want things quickly, using an app on my Android phone, or otherwise, using my laptop (wireless, of course). But when it comes to use the scanner, I find it works much more quickly to use it via USB on my laptop via the Wi - Fi.

  Thank you for your help (for that).

  Sincerely,

  ~ Miguel G

  Hello
  
  Thank you for using the HP Forums.

  Can you try this program to uninstall Microsoft and then reinstall the software features FULL again?
  
  https://support.microsoft.com/en-us/help/17588/fix-problems-that-block-programs-from-being-installed...
  
  Please download and install the software FULL of printing to HP for your operating system (Win 10) features:

  http://support.HP.com/us-en/drivers/selfservice/HP-DeskJet-3050a-e-all-in-one-printer-series-j611/4311836/model/5096936#Z7_3054ICK0K8UDA0AQC11TA930O2

  Once you have downloaded and installed the software, FULL of features, you will be able to print and scan.
  
  Hope that helps.

• Wireless IP addresses appear as source on cable network address.

  If a computer is connected to a wireless network with a pattern of us IP address will tell 192.168.1.0/24 and also then connects to a wired network with a different IP address scheme we will say 192.168.2.0/24 will be the traffic on the cable network never marked with the source IP address of the wireless network card?  I have Wireshark showing packet capture happens in some cases and it eventually causes a large amount of reset TCP traffic.  I don't think that the system would put a package on the cable network IP of the network using wireless as a source address.  Is this normal or desired?

  If the cable network becomes available when the wireless network is enabled I guess that packages would continue to be sent wireless.  I do not understand that the local routing table may indicate that the cable network has the lowest metric, but then I would think the wireless session should be reset and the traffic should then be retransmitted via cable connection and therefore be labeled correctly the source IP address of the wired network adapter.

  What I see with Wireshark is a packet of "pursuit"data on the cable network with a source IP address of the wireless network card and a registered some IP destination IP address.  Given our network configuration, this package creates a loop of reset TCP between our content security filter and the internel default router that fills our path to the Internet.  This problem started about 2 months ago and so far, all the research I've done are facing a problem with the laptop and have to assume it's an OS problem.  I guess there are some changes to the operating system in the way it handles packets when the cable network comes back online.  I have to wonder "I just missed this before?  I was the administration of the network for years and I'm sure I would have noticed the effects of these representations.

  Any thoughts?

  Hello

  Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the Windows XP IT Pro on TechNet public. Please ask your question in the Forums Pro Windows XP IT.

• HP deskjet 3050 ALL-IN-ONE J6 has: windows 10 driver for hp deskjet 3050 has ALL-IN-one, j611 series

  After that I updated / downloaded 10 Windows on my laptop, I can't connect to my printer. It is even not appear as option in Windows, even though I made an UPDATE of Windows looking for my HP. How can I download a new driver? A new driver is available for my PRINTER HP DESKJET 3050 ALL-IN-ONE J611 SERIES a? Please don't tell me I have to buy a new printer...

  Thank you!

  Download the driver from the printer Support page:

  http://support.HP.com/us-en/drivers/selfservice/HP-DeskJet-3050A-e-all-in-one-printer-series---J611/4311836/model/4311837#Z7_3054ICK0KGTE30AQO5O3KA30R1

• Cannot install Qualcomm Atheros QCA 9000 Series Wireless LAN Driver for Microsoft Windows 8.1

  I tried several times to install the driver Qualcomm Atheros QCA 9000 Series Wireless LAN for Microsoft Windows 8.1 in my HP 2000 Notebook PC via HP Support Assistant.  It downloads fine and looks through the installation process, but returns a gray "x" and seems not to install this driver.  Have same problem with Cyberlink Media Suite 10-Office Update, also.

  @WalterPowers,

  Thanks for posting.

  It is possible that there is a problem with the wizard for help where, you may not be able to install the drivers using the program. I would like to troubleshoot the software itself by following the ideas of SuperMario1 in this thread: http://h30434.www3.hp.com/t5/Desktop-Operating-Systems-Software-Recovery/HP-Support-Assistant-Window...

  Also, you can try to install the Qualcomm and Cyberlink yourself. If you go to HP.com, click on support and troubleshooting omn. Drivers and downloads, enter the model number of the laptop, in research. You will be brough to a page where you can select drivers for your product, after selecting a BONE.

• My iPad 2 can't find my printer deskjet 3050 J610 series wireless

  Hello. My iPad 2 can't find my printer deskjet 3050 J610 series wireless. Can I do anything to make it work?

  According to the list of compatible wireless Apple printers, support is the deskjet 3050 a. j611a is there something I can do? Some driver?

  Thanks for your help

  The Deskjet 3050 isn't compatible Airprint as mentioned above.

  In order to print wireless from your iPad, you need to use the HP ePrint home & Biz application:

  http://support.HP.com/us-en/document/c02775166

  Kind regards

  Shlomi

• Can I install the printer HP Deskjet 3050 (J611 series) has on an Acer Aspire one notebook without the disc

  Can I install a printer without the software disc? I have an Acer Aspire One 722 who doesn't have a hard drive. I just got an HP Deskjet 3056 A (J611 series) that only shows set up with a disk. The laptop has Windows 7 Home Premium - 64 bit OS - 2 G. Is there a way to download the software & configure the printer? I'd appreciate any help I can get. Thank you.

  Hello

  Yes, please download driver from following link (note: same for all):

  http://h20000.www2.HP.com/bizsupport/TechSupport/ProductList.jsp?TaskID=135&prodTypeId=18972&prodSeriesId=4311836

  Kind regards.

• Error "there was a problem starting C:\Program HP HP Deskjet 3050 a J611 Series\bin\HPStatusBL.dll"

  Original title: RunDLL

  RunDLL

  There was a problem starting C:\Program HP HP Deskjet

  3050 a J611 Series\bin\HPStatusBL.dll

  The specified Module could not be found.

  Hello

  Here's a Thread on the Forums of HP Support on your error message and methods to fix.

  "There was a problem starting C:\Program HP HP Deskjet 3050 a J611 series\bin\HPStatusBL.dll. The specified module could not be found. »

  http://h30434.www3.HP.com/T5/printing-issues-troubleshooting/HPStatusBL-DLL-module-could-not-be-found/TD-p/1346385

  See you soon.

• Cannot print wireless with the new windows 7 and the new printer the series wireless Kodak ESP 5200

  We have recently installed Windows 7 and a new printer wireless, Kodak ESP 5200.How can we get the printer to print wireless. At the present time he refuses just!

  * original title - we have new Windows 7 and the new Kodak ESP 5200 series wireless printer. How do we get the printer to print wireless? It will be printed next but not when disconnected *.

  Hi John and PaulineWhite,

  See the following article:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  I hope this helps!

• "There was a problem starting C:\Program HP HP Deskjet 3050 a J611 series\bin HP StatusBL.dll" how to complete delete it?

  There was a problem starting C:\Program HP HP Deskjet 3050 a J611 series\bin HP StatusBL.dll

  This is a direct consequence of my delete a printer in my list of installed printers

  Recently, I deleted a printer from my PC because I have more access to it. Now, I get this message everytime that I have started. Respect to the printer that I deleted

  Hi David,

  Download SINO by Artellos & save it to your desktop.

  http://www.artellos.com/cCount/click.php?ID=9 (download links: last download exe)

  Right-click on SINO.exe and choose "Run as Administrator" to run it.
  Then check the following boxes (check) only:

  Services
  Startup items

  Once activated, press the analysis of execution! button and wait for the program to finish. It should not take long.

  Search / search: "monitor alerts of ink."

  Delete it.

  If you could remove sino & it's log file too if you want - just right click and delete.

  Hope this helps, let me know.

  Kind regards

  Joel

• Im having a problem with your security software.  Your data bass must be bad, now I can't have spent my address question.  Ive answered all questions to the best of my knowledge and software has always said that my answers are incorrect

  Im having a problem with your security software.  Your data bass must be bad, now I can't have spent my address question.  Ive answered all questions to the best of my knowledge and software has always said that my answers are incorrect

  Hello Bernard,.

  You sign a document that has authentication based on knowledge, applied in it? If so, and if you can't go to questions, then you will need to contact the sender of the document because they can remove it and return you the document. You can respond directly to the e-mail received esign and happens directly from the sender.

  Kind regards

  -Usman

• HP1217nfw wireless printer - print but not scan - Windows 8

  Hello

  I can print over the network, but cannot scan.

  HP print and scan doctor can see the printer but says I need to install the full software suite. I follow this link and download more free. Where install the 1217nfw is not found by the installer.

  Before the manual ip address does not work.

  Firewall is set to 'off' local and network.

  I tried to do the 1217nfw the printer by default - not yet found by the installer.

  Can someone please help.

  Hi Hein_Aggenbag,

  I can't wait to hear that you have questions.  The firewall/antivirus can block specific components.  Try disabling the security through MSConfig program services, and then try to add the device software.  Also copies multiples or installs can cause this problem as well. remove all components before running the full functionality can also help. Please click here to complete the following steps to resolve this type of problem.  The information below will be useful for further measures to be taken if the above does not resolve the problem.

  1. at the first successful installation from a CD-ROM or by download (errors, unable to find the device, etc.)?

  2. is the device connected wirelessly or through an Ethernet cable?

  I hope this helps!

• Two entries in the list of printers MAC Applications - one prints wireless / the other does not work

  Just implement the 4630 and in the list of printers on the Applications, I have 4630 series and the 4630 [F4COCE].  Printed wireless and the other not.  I have the fax 4630 also but you have yet to try.  Why have I not two in the list of printers, and I would like to delete a?

  Hi BreezyP,

  Welcome to the HP Forums!

  I see that you have two printers on your Mac, and you wonder why. I'm happy to help with this problem!

  In my view, the second printer that does not print wireless, is the connected USB printer. If you unplug the USB cable connecting the two ends of the Mac and the printer, it should show offline.

  Regarding the deletion of a printer, it's a personal preference, if you do not use the USB cable at all, I would personally delete the one which is not wireless.

  The fax printer is used for the fax from Mac.

  Hope that answers your question and have a great day!

• Satellite A300D-11v - wireless network card does not work under Win XP

  I ve problem. I'm looking everywhere and I don t know what s happened.
  I installed XP and I ve problem with WLAN. Before I've used Vista and was ok :)
  I got the driver for RTL8187b of
  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=1&PFID=1&level=6& Conn = 5 & DownTypeID = 3 & GetDown = false & downloads = true #R TL8187B
  and I tried the official website of Toshiba.

  In Device Manager, everything is ok, but I can't connect.
  This n t work:
  "The wireless network card is Atheros and not Realtek! The LAN card is Realtek but not the wireless network card!
  The Atheros driver can be found here:
  http://APS2.toshiba-tro.de/WLAN/

  Can someone write me step by step how this fix.

  Please help me and sorry for my English :)

  > Also may try to reinstall the drivers that appear in this web site, appear here the Atheros drivers your need of portable.

  Your computer laptop doesn t support card Atheros, but card Realtek WLan.

  > In Device Manager, everything is ok, but I can't connect.
  As you say the WLan card is recognized correctly, but you can't connect.
  Why?

  I m do not know why, but you should check first if your WLan router uses the same standard WLan (802.11 A, B or G) as the WLan card.
  Check the settings!

  Then check if the right WLan encryption has been selected, check if the Mac address was not enabled, check if the firewall doesn t affect the WLan connectivity.