XP Pro Productkey not accepted during reinstallation/recovery for refurbished IBM T60 laptop activation

Similar Questions

• Adobe Acrobat 9.0 Pro does not accept serial number

  Adobe Acrobat 9.0 Pro does not accept the serial number.  Help, please

  You must use the correct installation file that corresponds to your serial number http://helpx.adobe.com/creative-suite/kb/error-serial-number-valid-product.html

• Necessary staff - Acrobat 9 Pro will not accept serial number

  I've recently updated to the Mavericks (I know I know... but not baby!). The only reason why do better that I stopped at Mavericks was to ensure that my CS4 would still work for me (I can't currently upgrade to a new CS'A). Initially, I installed from my disks, but ran into problems starting with InDesign (error code 5 and then say that it was not installed). Acrobat Pro would not accept the serial number, and after that Photoshop and Illustrator arrested for opening and gave error code 150:30.

  Because CS4 is an older version, there is no phone support. I went to the cat. He is not much either, just a parrot who repeats what I said - finally didn't so that he could not help me to «go to the forums» I'm on the forum and help very warmly received with uninstalling, cleaning (CC Cleaner Tool, etc...) and reinstall. They advised me to reinstall to a DMG downloaded from Adobe. I did everything above and it works now very well (at least seems!).

  My only problem is still Acrobat Pro 9 I remember this as a recurring problem over the years (thanks to a previous operating system upgrade). In the past, I was able to get help from Adobe because at that time, he was not as old. I managed to get someone on the phone who helped me darkly that I can't remember or repeat. In the search on Google and forums to research, it's apparently a problem for a lot of other people - but I have not found an answer that works, just a bunch of frustrated people. I have told me (more than once) that the customer service are the only ones who can finally solve the problems associated with the granting of licences or activation/unlocking serial number - which included a second round to try the phone, then cat and now forums. So here I am again!

  Adobe Acrobat 9 Pro has been installed with all of the suite CS4 - both times (first from my drive, (deuxieme from the DMG from Adobe). Not as a stand alone, but the license number seems to treat it as one and does not account for more that it has been installed. I have only a serial number on my disks box, which does not work for Acrobat Pro 9. Initial CS4 installation took this serial number, and since it's a CS2 upgrade - it took and serial number. This is not an option in Acrobat Pro. She asked only a serial number.

  In desperation (since not getting anywhere with Adobe - so far), I downloaded a key Locator, and he finds the serial number for the installation of Acrobat Pro. But it doesn't work anymore. ??? I noticed that the key finder says 'Acrobat 9.0' not 'Acrobat Pro 9.5.5' as in my applications folder (it is fully updated today - even if I can't open it). I manually applied all the updates to CS4 - as programs no longer work on the newer operating system. There were 23 patches for Acrobat Pro and it took a lot of time to work through the process, so not looking forward to it once again!

  I've exhausted most of the tips and troubleshooting tips. I contacted as many sources as I can. I spent more than a week (full time) on this 'project' to date.

  What we are supposed to do? We cannot use Time Machine either, it screws everything up by other means...

  Help, please!

  (I have no hair left out...)

  I went through a lot of stages, misadventures, installs them, reinstall. But I finally solved my problems.

  The final installation resolved all the issues with the error: 6 / error: 5 / error: 150:30 and above all, the problem with Acrobat 9 Pro accepts only not my key. It was mostly with my original installation disk, since the beginning of time. I've been lucky (and persistent) enough in the past to get people help me tech workaround. Now, you're on your own - with the help of the forum!

  I probably wrote what has worked under the wrong subject (it was actually an update of a forum member who helped me).

  So I post it here too, just in case someone else is having a similar problem... and to answer myself. ) I like to wrap things!

  I don't know that I've mentioned before... but something else that could make a small difference, was that Java has been pre-installed by the third CS4 install. It was installed after the 2nd installation of CS4 and I don't take her away after having served all things Adobe (as described below).

• My serial number is not accepted during the installation of 12 elements in Photoshop.

  My serial number is not accepted during the installation of 12 elements in Photoshop.   Answer: This serial number is not valid for Adobe Photoshop elements 12.

  You can't do that by phone, but in the link I gave, click always problems? and then chat with an Agent.

• Windows7 will not accept the product key for activation

  Windows7 will not accept the product key for activation after a clean reinstall of the o/S.i. to pass messages to the effect that the product id is not valid for activation, even if it's the OEM product key. Enter the key manually and the telephone audit failed. Any ideas?

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• I bought a windows version of 11 elements and not a mac version. So I can't install the dvd and it does not accept my serial number for the "downloadversion" how this can be solved?

  I bought a windows version of 11 elements and not a mac version. So I can't install the dvd and it does not accept my serial number for the "download version" how this can be solved?

  Thank you in advance.

  Arjen

  You can also download the Mac in trial version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  Photoshop/Premiere Elements 11: l http://prodesigntools.com/photoshop-elements-11-direct-download-links-pse-premiere-pre.htm

• Elements of Photoshop 7 new download does not accept my serial number for 2009. Can anyone help?

  Elements of Photoshop 7 new download does not accept my serial number for 2009. Can anyone help?

  Mac or Windows and EXACTLY what version of the operating system?

  Recent Mac AND Windows operating systems have been known to cause problems "weird."

  Are you using a computer administrator account will be full read/write permissions?

  I don't know if what you have is included in the link below, but take a look

  l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm

  You MUST use the special version and the serial number on the page, not your original drive or serial number

  NOTE that CS2 will not install on a "modern" with an Intel Mac

  When you install the special version of the PPro2 on a Win7 or Win8 or Win10 computer, you may need to right click on the program icon and select compatibility Windows XP in the popup of option

• I have a mac / downloaded adobe reader and does not accept the license agreement for end

  I have a mac / downloaded adobe reader and does not accept the license agreement for end.  It says successfully downloaded.  I'm going to use it and it won't work.  Told to close.  I opened adobe reader software and brings me back to install which I knocked again, and he says already installed.

  I closed out of all tabs, went to "safari" in the top of the page, clicked on close safari.  I clicked on Go, and then click applications, then I found adobe down and clicked on it.  then he gave me a place to click on accept.  I hope it works!

• Where can I go to get a recovery for my computer disk laptop gateway

  Where can I go to get a recovery for my computer disk laptop gateway

  http://support.gateway.com/support/default.aspx

  Contact Support for gateway at the link above.

  And read this about the Vista of the gateway recovery process:

  http://support.gateway.com/s/software/MICROSOF/Vista/7515418/7515418asi.shtml

  General information on this topic:

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, Acer, recovery disk/s etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• Color Laserjet Pro M452nw: Not accepted print job

  Just installed a new HP Color Laserjet Pro M452nw today, it connects using wireless to my network.  I followed the installation instructions and everything seemed fine and I was able to print the test sheet.  However, when I try to print a document from my MacBook, I get an error message in the print queue, declaring: "Print job not accepted."  I saw the support log, find others with the same question, but maybe on the models of different printers.  In any case, I have followed the instructions for the patch, installed a new printer driver Apple, reinstalled the printer, reset the printing system and I keep having the same problem.  Furthermore, he sometimes interrupts the print queue after encountering the error.  Do not know what to do...

  Hello @sanovogo

  You can try the following changes

  Go to the network set up on the printer and network services, disable ipv6 (disable)

  Go to the link (always within the network set up the menu) speed and the complete change to 100TX

  Sent a new print job to the unit

  If it fails while you see the error on the PC to the printer and try to deal with a report of configuration in the menu reports

  Get the IP address on the right side on the 1st page under settings of the printer

  Enter the IP address in the URL of web browsers, this online application should open indicating the status of the printer in this way can isolate you the connectivity to the printer

  If by this desire to point showing the error on the PC, you can print the configuration report and Web site opening, I'll suggest another pilot, because it must be the one having the problem I could give other recommendations but will like to know what happened first

• problem installation creative cloud on macbook pro.  does not accept my login information for installation even if I opened a session in Adobe

  Initially, I installed Photoshop on a PC only to find out that the PC has not been up to the task.  Bought a MacBook Pro today.  When I try to install, CC does not accept my login.

  Try to enter your system Mac password when your Mac asks permission to install

• iPad does not accept the new password for the new internet provider

  Installed new Internet link service - century. IPad will not accept the password written on the modem. How can I connect to wi - fi with this situation?

  Can you connect to the Wi - Fi connection with another? The problem may be with the password. Read this article: If you need help with your Wi-Fi - Support Apple password

• Do not accept the serial No. for InDesign CS5 when you try to upgrade to CS6. What should do?

  I am owner of InDesign CS5 (single product, are not part of a suite) and I'm trying to upgrade to CS6, that I just bought. When you are prompted for the serial number only. for CS5 Setup does not accept he says this isn't a product calling. I checked the serial number for my Adobe account - it's okay. Help, please!

  Please visit: http://helpx.adobe.com/creative-suite/kb/error-serial-number-qualifying-product.html

• My computer (or site) does not accept the no serial for Illustrator

  How can I start using Illustrator? I paid for it, and I thought that I downloaded (it took 1/2 hour). But the serial screen does not accept the serial number.

  Get in touch with the serial number and to activate by phone, web form or chat support.

  Mylenium

• Need help! MacBook Pro hangs, not bootable, no volume recovery

  Hi guys!

  I need some help here. My MB Pro (13",mid 2012, OS X Yosemite, 500GB SSD) crashed all of a sudden. I was not doing anything at the moment and it got a blackscreen. When I tried to reboot it, it says "A disc read error has occured. Please press ctrl+alt+del to restart". I looked that up in the internet and it can only be a command in Windows. (Yes, I have installed a Windowas partition with BC, size about 65GB) Then I tried to bring the mac into recovery mode pressing CMD+ALT+R. The spinning globe popped up and downloaded the latest "recovery files". (like this post About OS X Recovery - Apple Support) I already tried using the disk utility to repair the partition but I couldn't klick the "repair volume" buttons. Next I tried to reinstall OS X but the problem was that there was no Volume to choose for installation.
  So what the heck happened here? lol
  I would be very pleased if someone could help me solve this problem, I don't want to loose all my files (there are some important university files on it)
  Thanks very much,
  Greetings Gerit

  It sounds like a drive problem has occurred, as the alert system said. When a read error occurs, it is possible that the Mac partition was damaged and that your system cannot find a Mac system to start. That's why the world of spinning appeared.

  All I can suggest is to completely erase the disk, re-partition, then re-install OS X and Windows. Of course, if the disc is damaged you may need to replace everything first. You have a good backup?