XP pro sp3 pc disappears from network locations after a while

Similar Questions

• Picture disappears from the record after a reboot.

  Original title: WHAT CAUSES PICTURES TO MIGRATE

  Windows 7 Pro: make sure that the image is in the right file. Come back next day & I do a search because it is no longer in the original file. I'm the only person who uses this computer. I heard the complaint from others, but no solution.

  Hi Gardner,

  Thanks for posting your question in the Microsoft Community forums.

  I see from the description of the problem, as this image disappears from the record after a reboot.

  I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.

  To provide the proper resolution, that I would need more information on your side.

  Did you the latest changes on the computer before this problem?

  I suggest you to run the fixit and check if it helps.

  Diagnose and repair Windows files and folders problems automatically
  http://support.Microsoft.com/mats/windows_file_and_folder_diag/

  Let us know the status of the issue after you perform the troubleshooting steps. If you need help or information about the issue with the photo, I'll be happy to help you. We, at tender Microsoft to excellence.

• My WLAN disappeared from my computer after the awakening of the Mode Stand

  Original title: My WLAN as disappeared from my computer

  I had my computer on stand mode and when I took it out of stand by the WLAN is not all I turned and on the network adapter switch on the front of my laptop and it dosent do anything it dosent even say disabled or not when I went to my device manager , the adapter is not here yet most everything there is to connect to the local network. It is as if the WIFI network is gone I went Web site and tried to reinstall the driver and it dosent do anything. my computer also doesn't let me in the HP wireless assistant. I am enough out of options I am able to get some conection by plugging the power cord on my computer but I'd like to get this problem taken care of. Help, please

  Hello

  You may have a hardware problem with the WiFi card.

  Try a system restore before it happened.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  -------------------------------------

  You may need help in a real store of the computer (not the leeks and peaks at BestBuy or other BigBox
  stores) or HP support.

  Also check with HP support and forums.

  HP support
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• most programs now get error message "could not start from this location after a mail there is session 2 nite".

  After a session 2 nites E-mail there, many programs said message error "could not start program from this location. In addition, long delays after you clicked on a link, a large display hourglass for up to several minutes. Have tried to rebuild, but I think that the problem is still there. Any suggestions?

  What is a "mail session?

  What is, "have tried to rebuild?"

  Edition with Service Pack of Windows XP _ _?

  What anti-virus application that you use, and if she slept in day?

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find.  Reboot when necessary.  (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in.  Look for whatever it is you do not know using Google (or ask here.)  You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory.  This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/index.html

  Those who can help you discover visually where all space is used.  Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Cleaning the components of update on your Windows XP computer

  While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need.  This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on the root of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update (you * NOT * use the aggressive version):
  How to reset the Windows Update components?

  Reset.

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing you pouvez wish to make:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

  If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end.  This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.

• WRT320n disappear from network

  Hello, ives you a question.

  Week last ived had al ot of the problems with the router WRT160nV2 I changed the router Monday last with a new WRT320N. No problems and the downloadspeed of good wlan al start of 22 MB/s. It al works well until this morning I turned my laptop after 2 hours I put it and there is no connection. I look and the router gives no signal. All the lights are on and the wlan works. But when I want to look for connections it doesn't give my network.

  Now after 3 full reinstalled i ' VFD has an hour of wlan internet and connections disappeared again. The local network works with al downloadspeed of 35 mb/s which is the maximum speed of my internet connection.

  I don't know what to do now, but I'm getting very tired of this problem with the linksys router.

  I hope someone can help me.

  Thanks Rayman76.

  PS I'm Dutch so my English is not that good I apologize for that.

  I'm having exactly the same problem (and I'm also a Dutch citizen)!

  Is this temporary solution that must be repeated from time to time?

  I would like to know the origin of the problem, this overheating of the material? And it will be solved by a firmware update...

  Thanks in advance.

• Flash ReadySHARE disappeared from network drives

  Before I could access flash drives connected to my WNDR4500 (v2) by clicking on 'Network' under 'Computer' on my Windows 7 desktop. Since yesterday, the flashdrives have disappeared in this place. I can access it by opening Netgear genius, clicking ReadySHARE and then clicking on the address of the router. Flash drives appear so and I can copy/write normally. It is a cumbersome procedure. That's happened? I made no changes to my system, other than Windows updates to routine.

  It turns out that the solution is really much simpler. Instead of addressing the situation through the computer or network, enter Netgear genius, simply click through the ReadySHARE choices and click on the address of the router. When the flash player appears, right-click on it and select "Map network drive." Select any available drive letter and the flash player becomes immediately available under computer.

• USB disappeared from network preferences

  USB no longer appears as a network option to connect to my iPhone 6 per Hotspot. I turned turned & on iTunes; I downloaded and reinstalled iTunes; I turned off & on my MacAir & my iPhone, wifi Hotspot off & clicked on the small + button in prefs network looking for USB... nothing. I used to have a lot of options, but now I don't have three (see attached photo). Macbook Air Yosemite & iPhone using IOS 9.3.2 and iTunes 6 is 12.4.1.6.

  

  Hello ericesad,

  Thank you for using communities of Apple Support.

  I understand that when you view your network preferences you see is no longer an internet USB connection option. I know how it is important for you to be able to connect to the internet via the USB port. The following article in the steps to put in place a Personal Hotspot via USB with your iPhone.

  Share your Internet connection with Personal Hotspot

  Follow these steps to configure your Personal Hotspot:

  1. Tap Settings > phone.
  2. Click on Personal Hotspot and turn it on.

  To connect to a personal Hotspot with Wi - Fi, Bluetooth or USB

  You can connect to a personal Hotspot using Wi - Fi, Bluetooth or USB connection. Here are some tips for using each method.

  USB

  Plug in your device iOS to your Mac or PC using the USB cable provided with your device.

  Best regards

• Why Airport Extreme disappeared from Airport utility, after adding to the mac feature?

  10.11 OS, with the version of the airport, 6.3.6.  I can see is no longer my Airport Extreme Airport utility after I activated to Mac. I have Airport Extreme base ME91899/A and two Airport Express units model A1392 bolt torque.  I set up the Airport Extreme unit and the network first.  I was able to see the Airport utility. I then added each airport express unit. They were also visible. Then I added back the ability of Mac to the Airport extreme unit, and now it is no longer visible in the Airport utility.  Why is this?

  Apple has problems much time with iCloud. Turn off Back to My Mac across your airport routers and then shut down and restart the entire network.

  We will have to wait for a fix from Apple.

• Is it possible to recover hundreds of mails that have disappeared from my Inbox after it has been quarantined today by Norton Internet Security?

  I received an infected email this morning which resulted in Norton Internet Security quarantine inbox. All received emails are gone now from the Inbox (with the exception of two who apparently arrived just before the infected message).
  (1) is it possible to recover the E-mails lost without re-infection of the Inbox?
  (2) how can I avoid this happening again? Until today, the infected emails have simply removed by Norton Internet Security on arrival without all the previous messages being lost in the Inbox.
  I would be very grateful for help.

  you force Nortons of UN-setting in the file quarantine.
  Then, you create an exception for Norton analyzes the folders that contain your Thunderbird profile, so it is not repeated.

  Be aware that the infection is not as severe as the cure. Maybe you can find someone to Semantec to explain how an email in Thunderbird can infect anything unless you physically open an infected attachment that Norton should catch when it is written in the temp folder before opening.

  I lost a lot of time talking to corporate cretins to Semantec and they charge just "this is another line of defense" when asked for more details. Why, because they can simply justify not e-mail Scanner in any other terms. Enjoy it servers little or not by the challenges of usability and convenience.

  This "mail" was written on your drive hard until Semantec has managed to make a mess of things. It's a little late don't you think saying "you have an infection. Do they expect also for stuff in your browser to be written on the disc? You bet they do. Where is the preventive surveillance to data transmissions that prevents infection before it is written on your drive?

• Downloads disappear from the box after completion. (2nd try, I've screwed to the top of the first - sorry)

  When I perform a download from the Internet, download box opens and we see the download progress, however the empty box once the download is complete, (pdf or exe files). I now find the file do something with it as run it. It is never used to be this way, box downloads always showed made this day. .exe files downloads and pdf files to a file temp deeply in my user folder string. I guess what they get cleaned when the computer is turned off. I would like to permanently save all the downloaded files, unless deliberately removed by myself. PDF files will open in Nitro, (that I prefer far either Foxit that me have a hard time and the larger Acrobat Reader). How can I return to the original from the downloads area operation?

  See:

  • Tools > Options > privacy > Firefox will be: "Use the custom settings for history" > "Remember download history.

• Login items disappears from the list after restart

  After update to OS X, I noticed, that some applications work only not after reboot (for example Google Drive or iMessages). In 'Preferences system-> users & groups-> login items' list contain only one point (dropbox), but it should contain other applications.

  I add it manually all needed apps, system restart. Apps launch during the connection. But in "Login Items" once again only one item - dropbox. After the second restart - only launch of dropbox.

  Why custom connection list disappears after reboot?

  P.S.: Sorry for the bad English

  Please triple - click anywhere in the line below on this page to select:

  ~/Library/Preferences/com.apple.loginitems.plist

  Right-click or Ctrl-click on the highlighted line and select

  Services ▹ display info in the Finder (or simply to view info)

  of the menu.* contextual Info year dialog should open.

  ☞ Is the dialog box display "You can read and write" in the section sharing & permissions?

  Article in the General ☞, is the locked box checked?

  ☞ What is the modification date?

  If you do not read and write access to the item, change the settings as directed here. Note, however, that if a file has incorrect access settings, probably others as well. If the item is locked, unlock it.

  * If you do not see the item context menu copy the selected text in the Clipboard by pressing Control-C key combination. Open a TextEdit window and paste it (command-V). Select the line that you just pasted and continue as above.

• Disappears from drive mapped after restart/shut down PC

  Hi all

  Help her please this problem.

  I could connect another network drive, but I got this X: drive which is missing when I restart my PC.

  Did the procedure below:

  1. open the computer by clicking the Start button, click computer.

  2. click on map network drive.

  3. in the drive list, click a drive letter.

  You can choose any available letter.

  4. in the folder box, type the path of the folder or the computer, or click Browse to search for the folder or computer.

  To connect every time that you log on your computer, select the check box to reconnect at logon .

  5. click on Finish.

  - And I can't just change the letter of the road network as it was the way with the different macros.

  I try mapping the command-line instead and see if it holds. Here's how:

  1. Click Start, find the guest orders and do a right click to use "run as Administrator".
  2. To the administrator command prompt, type, and then press ENTER:

     NET use x: \\server\folder\subfolder

     (replace the server in the folder that you map)

• CC will be accessible from multiple locations after the purchase?

  For some reason, I am unable to access the "Buy now" screen when you try to buy a CC offer time-limited for students ($15.99 / month a) from my laptop. I wonder if I proceed with the purchase of another computer, I would be able to have access to a serial number of this purchase that would allow me to improve my system of the free trial version to the version purchased on my laptop?

  Thank you!

  There is no serial number with CC. You can simply sign in and in turn that means that you understand your connection problems on the dysfunctional machine one way or the other, without worrying. Just work the internet connection is required.

  Log, activation, or connection errors. CS5.5 and later versions

  Mylenium

• Link disappears from the Panel after incorporating

  I try to include a link in Illustrator and whenever I do it, not only he doesn't look pleasant with the image, but it no longer appears in the links Panel.

  This is the front where the logo is fine, but not embedded and therefore, when it is sent to the printer, the link is missing.

  

  This is after this incorporation. The link is now no longer in the links Panel and it also changed the appearance of the logo.

  

  I tried posting a link to an Illustrator image, which is what is shown here. I also tried to link to a PDF file with these results, and a file JPG and PNG, which looks better, but even once, are not displayed in the connection panel more. Just to try things even more, I flattened the transperency and once more my link does not appear in Control Panel.

  Is something wrong with me or my settings...?

  Also in the original link:

  1. Select all

  2. effect: path: describe the strokes

  It's a little better because the real traits are kept in the art (the effect is nondestructive)

• can not access shared folders & printers in windows 2003 server client XP pro sp3 systems error showing path network not found

  can not access shared folders & printers in windows 2003 server client XP pro sp3 systems error showing network not found path.

  After restarting pc for awhile, we can access shared folder & printer but after 30 minutes (more or less) again cannot access. In the printer folder connected printer displays status as long as it is impossible to connect to the win-2003 server. Please help me out of this problem because I support banking sector.

  Hello

  You can find the Server forums on TechNet support, please create a new post at the following link:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/