ICC 2.0 supported devices: 3560 and C6807-XL

Similar Questions

• Dell Streak says is not compatible, but the supported devices list says it's.

  The Dell Streak 5 (AT & T) is running Android 2.2 and has a Qualcomm Snapdragon (QSD 8250) which is supposedly Arm7. It is listed in the list of supported devices. However, when I go to the game store, it says that my device is not compatible with firefox mobile. Anyone know why would he lie to me?

  He should fix it momentarily. The 5 "Dell Streak has been accidentally blocked, but now was not blocked. It may take several minutes for the store update. Sorry for the inconvenience!

• Does iOS App Store allows the old inherited app to download to support more hardware and software?

  I'm using iphone 4 on ios5.1 and can not download waze, instagram etc... because they ios7.0, app or the new paypal required ios8.0. (so even if I upgrade my ios to 7.1.2 I won t be able to use it, it s a big problem)

  There are many applications no longer works on ios5.1.

  At Apple archived older versions of applications and will make available this backwards compatible?

  Developers can submit apps for obsolete equipment and iOS version outdated on the App Store?

  Does iOS App Store allows the old inherited app to download to support more hardware and software?

  Thanks for your help.

  You can download older versions of applications if you have a computer or other device running a newer version of iOS. This explains how do.

  Install the latest compatible version of an application on an earlier version of iOS or OS X - Apple support

• Acquisition of data not found no supported devices

  Hello everyone!

  I'm new to Labview, and I make a tutorial learn step by step. I have nothing plugged with the PC.   I have to do this exercise. EX1.

  When I set the properties of the DAQ Assistant (Signal gain > analog input > Voltaje) the message "no device supported found" appears.  I looked on the automation of measurement & > devices & Interfaces and data acquisition does not appear. I read it to appear, but I don't know, because I have nothing plugged, how I said before.

  Any suggestions?

  Thanks for all!

  Joselito.

  Hi Joselito

  Since you have the DAQ Assistant, you obviously have installed DAQmx. What you can do then is to simulate a DAQ hardware. Just open MAX (Measurement and Automation Explorer), klick "devices and Interfaces" then the button create new marked in the picture below. Follow the instructions in the dialog as apperas. I don't know what card you should use, but any M-series you should see you through. All AI channels will give you a standard sine wave and all lines of DI will alternate between high and low.

  

  Best regards

  David

  NISW

• Enumerate devices OR and get information about the device C / C++

  Hello

  I use using NI_DAQmx.  How to find and enumerate devices OR and obtain information about each device listed in C / C++?

  I am implementing a dynamic configuration allowing to access hardware OR on our system.

  I need to get logical device names, for example "Dev1", and then find what device OR, for example NI 6008, is associated with each device name.

  Thank you.

  -Neil shore

  If you just read the device information while you use DAQmx properties to achieve what you need:

  To get the names of all the devices in your system:

  DAQmxGetSysDevNames

  To get the product to a given device number (each product has a number of unique product in accordance with the reference C DAQmx help, for example, the USB-6008 case is 0x717A):

  DAQmxGetDevProductNum

  If you need to actually define the names of devices or whatnot, you would then focus on the System Configuration API.  I've never really used this outside of LabVIEW, but the Readme indicates he has CVI supports so you might be able to make it work.

  Best regards

• I can not get the automatic updates on my samsung jack sgh-i616. _ "connection to the update server is not available. Check your data connection settings and make sure that the device date and time are correct "___RESULT CODE: 80072ee7__ _"

  I can't get the automatic updates on my samsung jack sgh-i616.

   

  "Connection to the update server is not available. "Check your data connection settings and make sure that the device date and time are correct.

   

  RESULT CODE: 80072ee7

   

  -It is a windows mobile 6.1
  
  
  Thank you very much! = D

  As a guide.

  This error code translates ERROR_INTERNET_CANNOT_CONNECT.

  You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates
  http://support.Microsoft.com/kb/836941

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• The devices plug-and-play USB do not install on XP pro sp3 that new hardware wizard cannot find the software.

  Running XP PRO with SP3 and the latest updates as of 12/14/10.

  Both a logitech M570 wireless receiver USB trackball and cause a cooler hub from the usb port 4 master the new wizard material to search for drivers but ultimately are not found.  Neither disks driver with devices or of are available on the Web sites of the companies.

  I also encountered the same problem with a new sandisk sansa mp3 player recently. It was recognized instantly on another computer running Vista.

  However, I have an eternal hardrive of WD and a recognized on my laptop XP Trendnet USB wireless adapter. In my view, that all have two drivers I installed earlier however.

  In the end, I believe not to be able to use the Plug-and-Play devices despite them being listed as compatible with XP.

  I removed the devices, restarted, nothing helps. Unknown poster USB 2.0 Device Manager hub and 2 other unknown devices.  I uninstalled the unknown devices in Device Manager and do it again, but no change.

  Don't know what other information I should include. Any help please, I'm at a loss what to tackle next.

  Hi pennybrown,

  Follow the steps below and check, if it helps:

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows:http://support.microsoft.com/kb/322756

  To create a new registry entry that disables the selective suspend of the USB hub driver feature, follow these steps:

  a. Click Start, click Run, type regedit and then click OK.

  b. Locate and then click the following key in the registry: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\USB

  c. on the Edit menu, point to new, and then click DWORD.

  d. type DisableSelectiveSuspend, and then press ENTER.

  e. in the Edit menu, click on change.

  f. type 1 and then click OK.

  Note: This setting affects all USB host controller drivers in the system.

  If the DisableSelectiveSuspend registry entry value is set to 1, the selective suspend feature is disabled. In addition, allow the computer to enable this device to save power power off the checkbox does not appear under the tab for the USB root hub power management.

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• The device icon and text missing in the imaging devices Manager

  The device icon and text missing in the imaging devices Manager

  I'm running MS Vista Ultimate.

  The imaging device icon and the wording are missing in Device Manager are missing. A device is listed in the box as installed missing icon.

  The other devices in Device Manager normally appear and I can compare what is supposed to be there for another computer running the same version of windows.

  However, the device will not work and will not reinstall.

  When you try to reinstall the device an error indicates that Setup does not work and to contact the manufacturer of the device.

  Yet once, however, this happens when I try to install any imaging device.

  I'm unable to locate information about the imaging devices in the registry.

  I think that some registry entries are missing.

  It is not the missing peripheral individual. This is the section in Device Manager.

  The image error is logged:

  "Windows didn't load setup." Contact your hardware vendor. »

  This happens with any device inaging of anyone.

  Hi henrymullersr

  What imaging device do you use?

  We can try a few steps and check if it helps you.

  Try to run the hardware and devices Troubleshooter: http://windows.microsoft.com/en-US/windows7/Open-the-Hardware-and-Devices-troubleshooter

  If the result of the Troubleshoot utility is negative, then reinstall the device. And also be sure to uninstall the previous contents of the device driver by running utility windows install cleanup:

  http://download.Microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe

  Now follow the following steps:

  1. Save the Windows Installer Cleanup Utility package on your computer

  2. right click on the Windows Installer Cleanup Utility and run as administrator

  3. follow you prompt in the installation wizard. Once completed the installation, click on the Start button

  4. click on all programs. Click on Windows Install CleanUp Utility.

  5. click on the device driver (if on list) in the list of programs.

  6. click on Remove. Click OK

  7. click exit

  Restart the computer for the changes to take effect
   
  Then try to install the device driver and check the result: http://windows.microsoft.com/en-US/windows-vista/Install-a-USB-device

  After back and let us know if it helped to solve your problem.

  Thank you and best regards,

  R uma - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• New hard drive mounted, didn't save lost all devices sony and Microsoft word. Still have the product that was supplied with the laptop key. Can I get this without having to buy new?

  VAIO laptop

  New hard drive mounted, didn't save lost all devices sony and Microsoft word. Still have the product that was supplied with the laptop key. Can I get this without having to buy new?

  To restore the software preinstalled on the computer, or to install disks:

  Contact the OEM computer manufacturer and ask them to send you an installation to your computer disk - they may charge a small fee. Contact information for the manufacturer of your computer can be found here:

  http://support.Microsoft.com/GP/oemphone/

  Sony support:
  http://eSupport.Sony.com/

• I have hp laptop with built in webcam I went to Device Manager and it not on a day it is next day it not

  I have hp laptop with built in webcam I went to Device Manager and it not on a day it is next day it not

  Hello

  ·         What is the brand and model of your laptop?

  Method 1:

  Try running the fixit from the link next and if it helps: http://support.microsoft.com/mats/hardware_device_problems/en-us

  Method 2:

  Try to update the drivers for your webcam and check if it helps: http://windows.microsoft.com/en-us/windows-vista/Update-a-driver-for-hardware-that-isn ' t-work properly

• I tried to update my device driver and now the graphics card is not recognized.

  I tried to install and upgrade for my device and driver after not installed upgrading my dxdiag shows no specification of video card and the game I play sends a message indicating the TI can not find a graphics card.  I'm afraid to do anything until I know it won't make the situation worse.

  Original title: upgrades

  Uninstall the driver and download the correct driver for your graphics card, card and install it.

  To do this, go to control panel or (right click on 'Display adapters') Device Manager and right-click on the entry of graphics card, the in the drop-down list, click on "Uninstall".

  Graphics/video drivers:
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index.aspx?lang=en-us

  J W Stuart: http://www.pagestart.com

• Differences between the version of BlackBerry Device Software and platform. Help, please...

  Hi guys!

  I'm really confused... Help, please!

  We have developed applications for our customers. We tested with our BB8700 and it works fine.

  We used JDE4.2 for development... and we think that it will work on v4.2 based handsets.

  But our customers wrote that it works on v3.7. Why? Is this possible?

  I looked at the information about my 8700 device and then noticed: v4.2.1.107 (platform v2.3.0.84)

  -What are the differences between the version of BlackBerry Device Software and platform?

  Possible customers spoke of version 3.7 of the platform?

  There is a list of the devices, where we can find the version of BlackBerry Device Software by BlackBerry device model?

  Or where we can find information about the models of devices that will support our application?

  Thanks in advance!

  AFAIK there is no version 3.7 platform.

  Customer talking about the OS version.

  So, if they have the device OS version 3.7 you must use JDE JDE 3.6, 3.7 or older.

  Or take updated device OS if the necessary software is available.

• Download "Bluetooth device driver not installed." with my mobile phone in Lenovo laptop. I could also see a yellow mark on this device in the Device Manager and a code 28 error

  I have a very serious problem about Bluetooth. And it's really frustrating. I don't know exactly what the problem with it, but my problem is as follows

  When I connect my mobile phone via Bluetooth for laptop (win 7 ultimate), my system shows the connection. Also, I see my mobile phone listed in the device window. Earlier, when I brought the computer laptop, everything seemed good, at this time, when I use it to open the device (IE to control ); a window would show the option for playing music (there was a lot of option as a 1 ' headset and speaker") and other services supported by the device. but now, suddenly somehow window appears but with in a 2 sec to disappear again. Whenever I try to open the device I get this error. I must say that it is very very frustrating as you try to move your cursor to click on audio playback on this portable display option, the window disappears. Help, please. Now, let me tell you what I tried to solve this problem.

  I have laptop Lenovo, which has something like that for bluetooth

  Broadcom Bluetooth 4.0 USB

  Microsoft Bluetooth enumerator. I have 32 bits of the system, processor i3, win 7 ultimate, one port wifi

  In the center of troubleshooting, I tried for the material of scanning that show this Bluetooth device driver not installed (I could see a yellow mark on this device in the Device Manager and a code 28 error).

  But windows cannot fix it.  I have tried multiple devices but nothing turned up. also I tried the same devices on different laptops and all of them worked very well.  I checked online trouble - shooting.but not very useful. Please don't tell me about recovery. I don't know when it happened.

  Please help me. Please give me link if there is no download needed

  Original title: bluetooth

  Hi Roger,

  You encounter the error code 28 in the device to any device manager if the driver for this device is not completely installed on your computer. I suggest you to update the bluetooth adapter driver and check if it helps.

  Refer following article which contains steps of troubleshooting for bluetooth related questions and see if the problem is resolved:

  Error: "device driver Bluetooth not found" when you try to connect to a bluetooth device

  Note: Ignore the title of the article and also to find additional troubleshooting steps under the "more information" section.

  Please come back if you face problems related to Windows and we will be happy to help you.

• Blue indicator of Win 7 circle network ALSO hang Device Manager and MSE does not

  I have a strange problem since the recent windows updates.

  Indicator of network in the bar tasks displays a blue circle for about 20 minutes after I start the computer. During this time I can't run regedit, I can't open the Device Manager, and I can't seem to activate the protection in real time to Microsoft Security databases. However all the time I have internet and network access.
  After about 20 minutes the light will come back normal (sometimes it goes through a Red Cross first), date at which the computer then runs everything normally, if I have my phone on, I get the auto run screen, Device Manager works and I can also start MSE.
  It's as if the computer is waiting for something to happen. Device problem? However, all devices appear to work normally.
  The latest updates, I made were optional for monitor HP and Microsoft mouse and a keyboard, both of which work well in the era of 'blue circle '.
  I also tried updating the adapter software.
  It is not important, but it's annoying!

  Hi Carmen,.

  The blue circle on the network icon indicates that the system is looking for a network connection.

  If it appears at the start, then start the modem and the router before you start the computer.

  Method 1:

  Using the troubleshooter from network in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2:

  Step 1:

  Check if the problem persists in safe mode with network.

  Check out the link:

  Startup options (including safe mode)

  http://Windows.Microsoft.com/is-is/Windows7/advanced-startup-options-including-safe-mode

  Step 2:

  If the issue is not still in safe mode, and then start the clean boot computer to determine if a third-party program is causing the problem. To configure your computer to clean boot see the following link.

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
  http://support.Microsoft.com/kb/929135

  Note: See "How to reset the computer to start as usual after a clean boot troubleshooting" under more information to prepare the computer to start as usual after a repair.

  Also check the link for more information:

  Slow PC? Optimize your computer for peak performance

  http://www.Microsoft.com/en-in/athome/Setup/optimize.aspx#fBid=_dBb8lcqecd

  Important: When running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.

• U2713H (no HM)... other calibration supported devices?

  So I just heard on the new U2713H and the calibration of built-in materials. I'm interested, but troubled by the fact that the documentation seems to suggest that the calibration only supported device is the Pro i1Display.

  That sounds confusing... anyone who is this serious about managing the colors probably has at least a ColorMunki, otherwise a full-on i1Pro or i1Pro2. (I own an i1Pro and have no interest to shell out another $ 250 for an i1DisplayPro)

  Samsung has a monitor (B 27, 970) with similar internal calibration that supports all of these features and more. I was wondering if anyone knows if one of these devices are supported by the U2713H, or if it is only limited to the i1DisplayPro. because that stinks if it is, and there is nothing to recommend this on the U2711.

  Someone has some solid information in this respect?

  -Greg

  gmikol,

  Pro colorimeter X-Rite i1Display calibration only works with i1Display Pro. It was a design choice made by X-Rite, not Dell. They have no intention of allowing the other sensors because it has no sense of the business for them.