XPS-13 new Haswell/Touch Screen Version

Similar Questions

• touch screen not working not not after installing windows 8

  After my first installation of windows 8, there were a lot of conflicts and the shutdowns. Windows suggested another installation I did and now it works fine. However, my touch screen doesn't work. Is there a set of drivers that I can download to make it work again? This is the 64 bit version of windows 8

  Yes. This is a HP support document that shows how to get your touch screen working again.

  http://support.HP.com/us-en/document/c03488148

  You hardware is supported by two points.

  The driver that you are probably interested in is avaialble from the Windows Catalog, find the driver named "NextWindow - entry - Voltron NextWindow touch screen", version 3.1.6.0 and made for Windows 7, Windows Consumer Preview (size 27.6 MB) products.

• touch screen works is not on the new Toshiba Satellite S75-A7221

  The touch screen on my brand new Toshiba laptop with Windows 8 never worked.  Checked the Manager of devices (and why are the 3 names of Interface devices devices?) not named so that we can identify what they drive for the current versions even if it's new, and all show as being updated and active.

  The touch screen on my brand new Toshiba laptop with Windows 8 never worked.  Checked the Manager of devices (and why are the 3 names of Interface devices devices?) not named so that we can identify what they drive for the current versions even if it's new, and all show as being updated and active.

  Contact Toshiba.  If this system has been sold to you as a complete and functional - system it should work from the beginning.

• XPS One 2710 - Touch screen DOES not work

  My touch screen is not available on my 2710.  It worked fine for a very long time.

  Calibration is not available... System-> about said "no pen or touch input is available for this view."

  I noticed after I upgraded to Windows 10.   (but this is not necessarily the exact time fell out, I don't use it much)

  Then I downgraded back to 8.   Isn't there.   Figured I might as well go back to Windows 10.

  I did other things within the same rough period.   BIOS upgrade to A12.   Modified by some drivers, etc...

  I tried drivers, controlled at the touch of a cable on the motherboard... but did not have a single not forwards.

  Would love to hear some suggestions or ideas.

  Thanks in advance.

  Rick

  My 2710 XPS with touch monitor WORKS.  I did have a problem at all, even at the Vernissage of builds. I think that the missing element is the Dell OSD Application, which can be downloaded here: link

  I did a clean install of Windows 10, do not know if it matters.  Also, I went and installed all the drivers from Dell as well. I recommend to enter your service tag to get the specific drivers for your configuration.  Select Windows 8.1 in the menu drop-down.

  Since the 2720 is supported by Dell, I also installed some drivers select here.  I don't remember the those who precisely.

• XPS One 27 with Pro Pack touch screen problem

  I just bought a 27 XPS especially to run Windows Media Center. The touch screen was working fine.  I then bought and installed Windows Pro 8.1 pack and WMC works beautifully. The problem is that all of a sudden the touch feature of the computer is gone. Completely gone.  I ran the diagnostics of the touch screen and it does not even recognize the computer as having a touch screen. Maybe that's a problem with the Pro pack?  Or something else?  I spent about 2 hours with Dell support and vain.  I am at a loss on how to proceed--I hope someone has a suggestion.

  Ed,

  I sent you a friend request. Accept the same, then click on my name and you can make a private conversation.

  On the question, the usb input device that has an arrow mark on it, right click and select Activate-> restart the system - problem solved.

  Keep me posted.

• XPS 18 - touch screen in the BIOS?

  Hello world

  Anyone know for certain if the touch screen on a tablet PC from Dell XPS 18 should work in the BIOS?

  There are buttons in the touch interface and a tactile keyboard in the BIOS, Dell support seems to indicate that the touch screen probably would not work in the BIOS but there is no windows drivers.  I thought that it was strange to have one without the other, but it only would be not the first time the options were left in a tech design.

  The tactile feature on the one we have here in the Office has stopped working and still does not work after that Dell has replaced the entire screen.  I'm hoping to make sure that we indeed have a hardware problem and not an obscure issue of Windows 8, but I don't know how to test it outside the Windows environment if it is not designed to function in the BIOS.

  Thank you.

  I thought that I would like to boot in the BIOS and try out it for you. Drum roll please... Yes! Touch works very well on all the screens of the BIOS on my own.

• Yellow vertical line displayed on the touch screen of new printer Photosmart 7510.

  I have a vertical yellow line on the touch screen of my new printer Photosmart 7510.  The yellow line is part of the screen (pixels).  Install my printer on my XP Windows last night.  This is a new printer, right out of the box.

  This problem can be solved, or should I get a replacement?

  To help you better, if the printer is within the return period, you can contact the store you purchased at or if the printer is in warranty period for HP, you can contact HP phone support(1-800-474-6836) for a replacement.

• Minecraft PC version touch screen mode does not work does not correctly

  Hey, I just discovered that Minecraft pc version has a touch screen, I tried to use it, but I can't go anywhere, I can look from left to right, top down, but can't go forward or backward, can you guys tell me how to use it, or fix it?  or do something to make it better? my brother and I wanted to play multi player, he was going to use my PC while I used my tablet, but the touch screen mode was not very good, I couldn't use it, because I couldn't go anywhere. Please help me

  Hello Captain,

  Thanks for posting your question on the Microsoft community.

  We need more information about the issue so that we can help you better.

  The touch screen feature works in other applications?

  Thank you for details on the question and your efforts to resolve.

  This problem may occur because of the corrupt app or settings and game files. Touch screen can not work properly due to corruption drivers installed.

  I suggest you to run convenience store app and check the issue.
  See this link:
  http://download.Microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab

  Please also updated drivers chipset of the site Web of the manufacturer of the computer and the check.
  Reference:
  Download and install the drivers
  http://Windows.Microsoft.com/en-us/Windows-8/all-drivers

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• New update of Windows disabled my touch screen

  Hello

  My computer automatically updated to the latest Windows software, and now my touchsceen unresponsive. How can I fix? I already tried the pen and touch, but it did not work. Can you help me?

  Hello, Adam M.,.

  Thanks for the reply! I managed to fix on my own. I own a Lenovo ideapadp400 and apparently I had to unstall a few plugins of any kind. One of them was for the touch screen so that it is compatible with the update. Hope this helps others. Once again thanks for the reply!

• New Ipod Touch (6th generation)... Brick!

  New Ipod Touch (6th generation).  Right out of the box and as expected, another update Super bricks my new Ipod Touch.  My question is HOW?  And before you ask, YES everything has been updated to the latest version (itunes, Java, QuickTime, IE, Windows and other applications you can think of).  I purposely keep a copy of an older version of Itunes on an old laptop running because this is the only version that will recognize my Ipod when happen (both latest and Itunes).  Given zero has no effect.

  When say you that the device is brick what is on the screen today? It does not force a reset? Try If your iPhone, iPad or iPod touch does not illuminate, If iTunes does not your iPad, iPhone or iPod , or If you cannot update or restore your iPhone, iPad, or iPod touch.

  See this note about QuickTime.

  TT2

• Sensor of fingerprint identification does not work and the touch screen unresponsive

  iPhone 5 s 32 GB Stopped working sensor of fingerprint identity with the touch screen not responding

  latest version of iOS

  Flickering of screen there are some horizontal lines appear on the screen for a while in very minor rainbow color

  went to the apple support no help in troubleshooting. They asked me to request a replacement pay for 22K INR.

  I think that it is not worth getting a replacement of the delivered phone to new/old version as new series is available in the market, paying a large amount.

  I would like to hear your valuable contributions.

• Touch screen has stopped working - HP Pavilion 23 all-in-one

  Touch screen no longer responds to any contact afer 9 months use.    Details of the said system - touch compatible HID "this device works correctly.

  Hi JohnSevenoaks,

  Welcome to the HP Forums!

  I read your post on how your touchscreen no longer work, and I would be happy to guide you to a resolution! To start, I have to ask you a few questions:

  • What is product and model number from your desktop?
  • What version of Windows you have installed on your computer?
  • Have you installed a new software or hardware on your computer recently?
  • Has your computer has completed its important Windows updates?

  In the meantime, please follow this document on the HP TouchSmart PC - troubleshooting problems of touchscreen Windows 7 or for Windows 8. This should help to determine if the problem is software or hardware related.

  Please re-post with the results of your troubleshooting, as well as the requested information. I look forward to your reply!

  See you soon!

• W3 Standing Touch Screen malfunction

  Time to time, especially after you update from windows session, touch screen did not react after the restart of a tablet.

  The title, I always reinstalled drivers, restarted Tablet and problem was absent.

  This week, there was a new update of windows after restart and Intel graphics, touch screen works maybe 5 seconds, then continuous dead.

  Device Manager says:

  Hidden I2C device ACPI\SYNA7300\3

  error code 10

  status_device_power_failure

  I reinstalled the driver several times with all available versions 1.0, 1.01, 2.0, 2.01 - no improvement.

  I also tried driver lenovo ivga.

  I reinstalled the entire system, and it still doesn't react.

  In Device Manager, all devices have sxwitched off the coast of the energy saving function.

  Could you pls help. Thank you.

  Blackout in touchscreen means well enough that you have to come back to fix it. The cable is loose or it is broken. :-(

• Disable the touch screen for a laptop Windows 8?

  I have a Dell XPS L702x infamous Ghost by clicking on issues where the touch screen randomly 'clicks' on arbitrary areas of the screen (mine seems to be in the lower right corner, often minimize all my open windows or opening calendar) and through the upgrade to Windows 8, it seems a former N-Trig driver who disappeared I would disable the touch screen. Now, I have no way to disable the touch screen, and while Google suggested release "Use your finger as input device" under the pen and touch, I don't even have this available to UN-click box on!

  So: How can I disable the touch screen on my laptop or y at - it a program that can do for me? I am indifferent in fact using the touchscreen - I'm more concerned with the ability to functionally use my laptop without sporadic clicks on my screen.
  Thank you.

  I had the same problem with XPS 17 my wife.    I needed to restore basic functionality so that disabling the touch screen was acceptable.     However, unlike samie (but like you) I didn't "Use your finger as input" option in the control panel.

  I tried to disable the device N-Trig driver in Device Manager, but the pilot did not appear to have be properly installed (after the upgrade from win7)

  I went on the N-Trig (http://www.n-trig.com/Content.aspx?Page=Downloads_Drivers) driver download site and download the new drivers for windows 8 (I have the feeling that they weren't here last week).

  I then when options "Device Manager" on the "Hardware and Sound" page of the control panel.

  In the Device Manager screen, I saw a node N-trig DuoSense digitizers with several below subnode (before dev driver install it there was only one).

  I right mouse button on the element at the top, with a name that ends by "between the roots" and select "disable."

  This touch screen successfully disabled.

  Pity to lose the touch screen, but my wife does not use it and I was in danger of my life, as it was.

• Windows 8 update, remove programs and touch screen does not

  With the help of Windows 8 and a few apps would stop working and go back to the start screen. So I ran the "Refresh your PC w/o affecting Files. He removed most of my programs (Norton, Microsoft Office, among others) and now my PC HP TouchSmart 320, touch screen does not work. How can I recover my programs and get the touch screen to respond as before I 'Refresh '?

  HP may not have a driver Windows 8.  In general, manufacturers like HP allow the upgrade (and cancel you guaranteed if you do).  They want you to buy new hardware.

  You might be able to install the driver by right clicking on the installer, and then select Properties. On the Compatibility tab, change its operation under Windows 7.  This tent to fool the installer in the work.

  It worked for my graphics card, the latest version of it was for Vista (my computer came with Vista), but I was able to continue to use this graphics 7 and 8.  Your results may vary if it depends on how HP built their driver.