Yellow vertical line displayed on the touch screen of new printer Photosmart 7510.

Similar Questions

• Re: Satellite A500 - 15 M - blue vertical line appears on the LCD screen

  Hi - I turned on my laptop the other day (I have an A 500 - 15M) and I noticed a very thin dotted vertical blue line running through the centre-right of the screen of my computer, all the way up and down.

  I tried things like change the desktop theme, screen settings, updated to the intel drivers but nothing is done, it won't go away. Does anyone have a solution or a similar problem? I bought an extended warranty of 3 years so could still call Toshiba and ask them about it, but wanted to see if there was a quick fix here of someone.

  I tried to restore to a previous restore point, but nothing helped.

  Help please, because it is very annoying!

  Thank you very much!

  Hi bilal1982,

  Hmm, it seems to be a hardware malfunction with your laptop

  I mean that if you tried to update the driver display and restored Windows to an earlier point, but without success, it seems that the graphics card or LCD screen is defective.
  You can connect an external monitor to check if it of the graphics card or internal LCD screen.

  But in both cases you should contact a provider authorized in your country. Guys can fix your laptop under warranty, so it of free for you.

  Here is a list of aspic, where you can search:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

  Good luck! :)

• The gray vertical lines appear on the bottom screen shots

  Hello

  Vertucal gray lines appear on the few photos that I took to be painted. They appear not in the Photos, but only when they are displayed as background pictures. It happens on every image but some a few, I can't work on any model! Any help would be appreciated!

  Photo for example is attached.

  See you soon

  

  You see the same problem, if you export the photo (file > export > export original) and then set the photo as the desktop to a folder in the Finder and not directly from your photo library?

  Preview shows also the photo with band objects?

  If you can see objects only when display as an image of the desktop, try the same from another user account - sign in the guest user account and set the image of the Office here.

  If the guest user account shows the same objects, restart your Mac in safe mode.  What is going on?

  See this link: Mac OS x: Safe Mode boot

• The photos are not yet (printer Photosmart 7510)

  1 HP Photosmart 7510

  2. Windows 7 64 bit

  3. There are no errors.

  4. I don't have any changes.

  Hello, HP Support.

  I just bought a new HP printer to replace my old HP C4280 printer. Although fine print pages of the letter, I'm struggling to print 4 x 6 photos. Printed images don't print not evenly to the edges of the photo paper. I thought that I put in the incorrect photo paper so I took the photo paper and put it again. Unfortunately, the photos are always printed evenly to the edges.

  Here is an image showing the problem:

  

  I also fought with the same problem and noticed that there are not any helpful solution. After an hour of fiddling and realize that many other people have the same problem because of the design of the printer and the inability of technicians to understand the problem, so I decided to share my solution:

  1. first remove the photo tray and paper in the main tray.

  2. now, look at how work the main input tray sliders... To adjust the front and back after installation of the paper to ensure that it feeds correctly. If this is not the case, the document will at an angle and therefore the white frames uneven or break printing. You can see that the paper comes to tilt slightly and with lines

  3. make sure that put you the paper in the main tray outright and that the two blades are aligned with the paper squarely against the back of the tray.

  4. now make the printer alignment. If you have inserted the paper correctly, you will see that patterns of alignment are also directly and have some space before you start, not not against the side of the paper...

  5. now print a photo in the main paper tray A4/letter... If the document has been inserted correctly in the main tray and you have deselected the option border to print full coverage of Letter/A4 plain paper.

  6. once it works, you can introduce the photo tray again and starts the photo printing. They should also print correctly now.

  Hope that this help that I was about to box this printer and ship back to HP until I thought the paper was poorly supplied due to a bad main tray hugging design which weighed the alignment of the printer, this stuffing your photo printing as well...

  Good impression

• Yellow vertical line appears on Satellite Pro

  My machine is 18 months old. Last week a thin yellow vertical line appears on the monitor approximately one third of the left side. Tonight a thin purple line appeared about 1 cm to the right of the yellow.

  Any ideas what causes this and how can I get rid of him?

  Hello

  You you connected the laptop external monitor to check if the lines appear also on an external display? If this is not the case, check it.
  If the lines appear on the second screen, so I suspect it s a malfunction of the motherboard (graphics card).

  In this case, you do not have many ways to solve. For the most part a replacement is necessary.
  According to your message, sure the laptop is 18 months, so usually the guarantee should be valid if you have registered on the page of Toshiba notebook.
  The standard warranty covers the laptop for 12 months and after registration, you have a 24 months warranty coverage.

• Touch the touch screen moves the cursor appear on another monitor in a multi-monitor for Windows 7 system

  There are three 3 monitors on this system. Two of them are the screens LCD Dell 2407WFP-HC and one is the touchscreen Acer T230H. Dell monitors are connected to a NVIDIA Quadro FX3500 and identify as monitors 1 and 2. The Acer monitor is connected to a NVIDIA GeForce 7600GS and identifies as monitor 3. The system runs Windows 7 Ultimate x 64, with updates. Everything works fine except for the touch screen feature.

  According to the instructions I used the Tablet PC configuration to configure the touch screen. In the installation program, reports monitor 2 Dell incorrectly as having entered touch available and the Acer monitor 3 reports as not having NOT available - also incorrect enter key.

  When I touch the Acer screen, the cursor appears on the monitor Dell 2 and moves according to the movement of my finger on the Acer screen.

  1. Go to the control panel and search for "Touch".
  2. Click on 'The Tablet PC settings'
  3. Click on "Setup"... "right" configure your stylus and touch displays.
  4. Choose "enter." »
  5. Press the 'Enter' key until you see the instructions displayed on your actual touchscreen.  Tap the screen and it will say something like "press ENTER to move to the next step.

  You should now see your contact to events (and mouse) are displayed on the touch screen when you... Well, touch.

  Hope that helps.

• Satellite P30 - three vertical lines appeared on the screen

  I have a problem with the display on my p30 110 three vertical lines appeared on the screen, the pc has been scanned with three different antivirus programs and seems to be clean any suggestions would be helpful

  Hello

  These problems usually occur due to a malfunction of the equipment.
  But have you tried to update the graphics driver. If this isn't the case, so I recommend to do.
  The update may solve some problems.

  However, if vertical lines persists then you should ask Toshiba service for assistance.
  He must check the laptop.

• line of t440s on the touch screen of Windows 8

  When I move my finger on the touch screen on my new T440s Windows 8 machine, a thin dark line about an inch long follows my finger - as much as I move it. Someone at - it ideas?

  Thanks a lot for the answers. Yes, it looks like the tail after the finger in the videos. But I followed the advice sub - turn off 'Visual Show' in the box of Pen and Touch, and it worked. No more of the tail. Great fix and easy. I arrived at the right screen by writing just Pen and Touch in the search function of Windows 8.

  Thanks again.

• CLJ CM6040f MFP: Trainer replaced, display now turns on but the touch screen is unresponsive

  Original malfunction has been sounding like turn, but not display. Replaced the trainer, now displlay is on, but does not respond to the inputs of the touch screen. What is the sequence of corrective to fix a malfunction?

  Try this:

  http://h20564.www2.HP.com/hpsc/doc/public/display?docid=emr_na-c03559852&sp4ts.Oid=3356526

  If my post is solved your problem and click the accepted as button solution under him.

  In order to thank a Tech for a post click the thumbs up button under the post.

  You can even click on the two keys...

• Qosmio G30: blue vertical lines and crash dump blue screen

  I have a Qosmio G30, model No. PQG32C-AV605E with BIOS Version 3.40.
  I want to update 3.90, but I can't get into Windows.

  How update the BIOS without windows available?
  Y at - it a utility BACK?

  If so, please send and I will download it or send me an email on where to download.
  The G30 that I has vertical lines blue on the screen when the computer starts in VGA mode entering into Windows for the first time.

  But the machine can not get into windows, it freezes and dumps and restarts before that.
  I replaced the RAM with new RAM, but it has no effect.

  I ran the diagnostics utility and hard drives are OPTIMAL in RAID 1, so no errors there.
  Reinstalling Windows went well: I can't do it in VGA mode without lines.

  Toshiba technical support told me that an upgrade of BIOS fix it.

  Thanks for any help.

  Hello

  have you tried to plug the external monitor? If it still shows blue vertical lines, the reason is a failure of the graphics card. (You can also reinstall Windows to check the related issue of f it's Os). Otherwise, contact the after-sales service.

• Sensor of fingerprint identification does not work and the touch screen unresponsive

  iPhone 5 s 32 GB Stopped working sensor of fingerprint identity with the touch screen not responding

  latest version of iOS

  Flickering of screen there are some horizontal lines appear on the screen for a while in very minor rainbow color

  went to the apple support no help in troubleshooting. They asked me to request a replacement pay for 22K INR.

  I think that it is not worth getting a replacement of the delivered phone to new/old version as new series is available in the market, paying a large amount.

  I would like to hear your valuable contributions.

• Disable the touch screen

  I have a HP ENVY x 360-m6-w105dx and would like to know if there is anyway to temporarily disable the touch screen?

  Hello.

  I did it via Device Manager in Windows.

  Look under "Human Interface Devices".  There should be a line for HID-compliant touch screen (or something similar).

  Double click on that and then click on "disable the device.

  You can make it work again by clicking on "Activate the device" in the same place.

  Good luck!

• Yellow vertical lines in streaming video

  How doesn't eliminate the yellow vertical lines over streaming video?

  http://mymce.WordPress.com/2011/06/07/vertical-yellow-lines/

• S2240T, the touch screen does not work

  I just bought this monitor and it displays correctly what should be, but it does nothing when I touch it. I have the USB cable connecting my monitor to my computer. My OS is Windows 8.1. In my view, it is possible that it must be installed for the contact to work, but the disc (and documentation) that it comes with a driver is very little used for this. The driver on the disk I installed seems just for display, no contact.

  I had to reset my computer all Win8.1

  I have the touchscreen Dell P2314T (VGA) also has worked well since I bought the new optiplex and monitors. When I reinstall my system it di does not work.

  I have unplugged all connections to the back of the monitor and was able then to recalibrate and set the touch screen and now it works fine.

  THUS, it does not work with Win 8.1

  but should be the last recognized maybe or just USB connection need to be re added as if it were a new device to the modified system.

• HP Paviliion cursor disappears after using the touch screen

  Hello

  So, I just bought a new laptop from HP Pavilion special edition beats 15z Touhscreen about two weeks ago. I was with the sliders and just decided to try some custom cursors. I have downloaded them (link to the page for the sliders below) and selected in the Control Panel, no problem. However, as soon as I use the touch screen, it disappears (which is normal), but when I try to use the touchpad or mouse, it doesn't come back, unless it's one of the other cursor types: link select, busy, etc.. Also, if I use custom to select all normal but the cursor jumps back. Finally, even if I click on a link that would otherwise use the selection cursor link using the touchscreen, the link selection cursor appears again when to switch it on touchpad.

  The other problem is happening sometimes just by default, for the most part in Google Chrome. However, with the custom cursor happens no matter what, and it's a major problem.

  Thanks for you help with anything that can give me.

  Data sheet:

  Windows 8

  AMD A8 - 5545M APU with Radeo HD Graphics, 1.7 GHz

  8 GB RAM

  processor 64-bit / x 64

  Full Windows touch support contact w/10 Points

  link to the download page for sliders: (if so, Im just trying to display all possible information)

  Slider Preview/download page

  Hello Tony,.

  I apologize for the inconvenience caused.

  Lets try the following methods and check if it helps.

  Method 1: As you said that it happened also with the default cursors as well, I suggest you to try the mouse setting in Windows 8.

  1. go in Control Panel.

  2. go in the mouse settings.

  3. uncheck the option for the mouse to disappear while typing.

  4. now check if the system built in the cursor disappears.

  Method 2: As you say it happens only with custom sliders, I would suggest that you check to see if the problem persists even after placing the computer in a clean boot state.

  How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135/en-us

  Note: After troubleshooting, see the section «How to reset the computer to start normally after a boot minimum troubleshooting»

  Hope this information can help, just reply to the State of the question for any other help.