XPS 9100 and 3 TB HARD drive

Similar Questions

• Use the TC for backup and as external hard drive

  Hello

  Can I use TC for backup and as external hard drive?

  If yes then when it is full, TC erase my personal data I have stored in TC as a hard drive or erase the oldest backups?

  1. Yes, but you shouldn't. Your working data and backups must be on separate drives in case one of them goes down.

  2. Time Machine will not erase the data it did not originally there.

  (142739)

• Unable to detect and open the HARD drive

  Hello. I have a Seagate 1 TB external hard drive. And my mac is running on the latest OS, I was still able to connect and open my hard drive on my mac, but after reboot my macbook only once after an update, I can access is no longer my hard drive. Why is it so? Is that what I can do to re - open and use my hard drive as usual?

  Restart and hold down command + R, this will take you to the recovery, you can test and repair the hard drive.

• Desktop PC's processor HP 251 - a11, Windows 10, AMD quad core A6-6310 accelerated with 4 GB memory DDR3 system and 500 GB hard drive. I installed I tunes last version and cannot operate.  Error message says Hello not activated.  Tells me to

  Desktop PC's processor HP 251 - a11, Windows 10, AMD quad core A6-6310 accelerated with 4 GB memory DDR3 system and 500 GB hard drive. I installed I tunes last version and cannot operate.  Error message says Hello not activated.  Tells me to go to the Control Panel then administrative tools and allow to Hello.  I followed these instructions, but I can't activate Hello.  What did wrong and how I can activate the Hello?  My email is * any help is greatly appreciated

  < email published by host >

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• laptop wet and now says hard drive not found

  HP laptop has been wet and now it says device not found Boot please install an operating system on your hard drive. When I have hot f2 and do a hard drive to check it says not found.

  Then the hard drive shorted and is electrically dead. I'm sorry.

• My space free icloud is full, so I want to download all my files on my Mac and use a hard drive instead of icloud. I'm not happy to pay to store my files in icloud. How can I do this?

  My space free icloud is full, so I want to download all my files on my Mac and use a hard drive instead of icloud. I'm not happy to pay to store my files in icloud. How can I do this?

  Welcome to the Apple community.

  Locate in iCloud drive in your Finder, drag to where you want to save them on your Mac, confirm, you want to move them when the Finder prompts.

• ? Primary Master Hard Disk S.M.A.R.T. Bad Status. WARNING: Return immediately-up your data and replace your hard drive.

  When I start my computer, an error page appears. At the bottom of the page it says, "Primary Master Hard Disk S.M.A.R.T. Status Bad." WARNING: Return immediately-up your data and replace your hard drive. Press F1 for Setup, F2 to continue"I was just pressing F2 and then it starts normally, but whenever I start my computer, the same page comes up.

  Is this serious or it could be something minor? Do you have any suggestions? What does that mean? What should I do? I followed some information in the forums of someone who has had the same problem and finally, they fixed them, they said that when they made a prior microsoft update what they where missing a Parcer.

  Note: I tried to save my data before, but something goes wrong and the backup will not be completed.

  You can download the program for diagnotics HUtil Samsung http://www.samsung.com/global/business/hdd/support/downloads/Hutil210_iso_for_CDROM_drive.zip

  It's an ISO image then unzip the file and write the ISO image to a CD.

  Then restart the PC and booting with the CD. To do this, you must change the priority/boot order in the BIOS to boot from the CD first.

  Once you have started the program HUtil it will detect your hard drive Samsung. Select the hard disk.

  Enter the main Menu on the tool. Go into the menu of the tool and enter Auto diagnosis. Enable diagnostics to run, once done it will ask you if you want to perform a surface analysis - enter Yes. The analysis of surface will take some time to complete. If errors are found, it reported.

  Once more I recommend you backup your data as soon as possible, preferably before executing HUtil program.

  For more information on the program of HUtil you can go here: http://www.samsung.com/global/business/hdd/support/utilities/Support_HUTIL.html

  Write when the cache is enabled: when data are written back to the hard drive, it is written in the cache that is much faster to actually write to the hard drive. An acknowledgement of receipt is then sent by saying that the data has been written on the hard disk, when in fact it does not. In this way so that the data is actually being written to the hard drive to the rest of the system can continue to work. However memory cache is volatile, if the power goes off, the data in the cache is destroyed and if it has not been written to disk hard and yet he's lost.

  If your settings are correct. Usually the drives are configured for performance and the write cache is enabled. While flash drives and memory cards are configured for the fast-moving and write cache is disabled.

  If you want to learn more about this: http://www.pcguide.com/ref/hdd/op/cacheWrite-c.html

• I tried the clean boot and now the hard drive works simply and screen went black. The mouse still moves around the screen without any outher work keys? That is what it is?

  I tried the clean boot and now the hard drive works simply and screen went black. The mouse still moves around the screen without any outher work keys? That is what it is?

  Hello

  You will need to reverse the clean boot, as it is either incidental compared to
  the real cause of the problem. What, where you try to fix initially using the cleanboot?

  You can access Mode safe? Repeatedly press F8 as you start? If so you can try the configuration - control panel
  The Device Manager - graphics card - Double click on - driver tab - click the driver UPDATE - then
  Right click on the device and UNINSTALL - REBOOT.

  Another method to try to get to the desktop (try in normal Windows Mode without failure) is
  CTRL + ALT + DEL and the processes tab find EXPLORER.exe and COMPLETE the PROCESS on this subject - and then
  on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is reached
  by tapping F8 as you start several times.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
  That there is no information on a black screen as it is on a blue screen just adds to the
  Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
  Google to see the proposed repairs, whom some have worked however these cover a wide
  field efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you don't have the disks your
  system manufacturer will sell them at low prices. Or try in safe mode if you can get there.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (making the system restore it)
  must be bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation
  (if all goes well, the data records and need to reinstall programs). Don't forget to make a good backup or
  3.

  You can use another DVD that aren't copy protected but you you need to own
  Product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can do a repair installation that needs to save the data, but you will
  to reinstall the programs. This also requires correct Vista disks especially for OEM versions. You
  will need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (type in a single line or copy / paste a line at a time and then press enter - enter a bracket )
  or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)
  
  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Connection between the computer and the external hard drive stopped during the backup

  The connection between my PC and my external hard drive has been accidentally cut while I perform a backup. Since then I reconnected my external hard drive to my computer and come back again.

  Windows continue my back up where it left off, or he adds a new point backup on my external hard drive?

  Hi Brandon,.

  Thanks for posting your query in Microsoft Community.

  I would like to inform you that, if the backup is interrupted and it is asking to start the backup. Then, you will need to perform a new backup.

  Reference: back up and restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows/back-up-restore-FAQ#1TC=Windows-7

  It will be useful.

  Let us know the status, we are happy to help you further.

• How many workstations can connect and use a hard drive in windows 7 Professional?

  How many workstations can connect and use a hard drive in windows 7 Professional?

  Thank you

  Randy

  Original title: Windows 7 Professional Log In

  If my memory serves me, 10 is the professional for Windows Server limit.

• I currently store my pictures on and an external hard drive.  Lightroom 6 was not able to find the picture momentarily files.  I inserted an external Flash DRIVE after removing the hard drive and the computer renamed the stick with the same drive letter t

  Redesign existing external hard disks and still 6 Lightroom able to find existing photos.

  I currently store my pictures on and an external hard drive.  Lightroom 6 was not able to find the picture momentarily files.  I inserted an external Flash DRIVE after removing the hard drive and the computer renamed the stick with the same drive letter that has been designated by Lightroom to store my photos.  I could go into my Windows 10 and reset the player to the letter that Lightroom has given at the beginning of the external hard drive.   However, I know this can happen again, if I connect any stick USD or another device, while the external hard drive is not connected to my laptop.   I found the information that I can do the new designation of the final drive by choosing a letter it is 1/2 way or higher in the alphabet.   I would like to turn an external hard drive on a strong letter, warns we hope this previous problem.   My question is, if I already have a lot of pictures on this external hardrive with the designation of the current drive, how it becomes a higher letter and have 6 Lightroom recognizes files, now under the new designation of drive letter without having to go to each photo individually and manually force Lightroom 6 find each photo.  It would take more time than I'd like to lose.  Is there a way to get just 6 Lightroom to recognize the new disk designation has changed and is able to find all of the existing files?

  I have read the ADOBE LightRoom 6 manual and seem not to be able to find anything on how to do it.

  Any help would be welcome.

  Thank you!

  So in Windows, you can select a drive like q letter (or any other letter you want only towards the end of the alphabet)

  Then in Lightroom, you can reconnect to the photos on q: the following instructions (see specifically 4 Figure and related text)

  Adobe Lightroom - find moved or missing folders and files

• Tecra 9100: Delayed write failed - hard drives on their way?

  Hello again,

  I am a member of the Club feared messages error "delayed write failed" and some of that my hard drives are to blame.

  These errors pop - up when a large enough facility is in place, or whenever my system is written something great for my hard drives (which I might have to wait a while to complete). It happened before installing the battery Bluetooth Toshiba. My laptop has finally frozen during installation and all I could do was to move the cursor. 30 minutes in the installation, I get several of these stupid error messages. They say ' delayed write failed - file C:/xxxxx/xxx/xxxx was not justified perhaps due to a connection or hardware problem "(or something like that). When the message window there is almost no way to escape in out makes a power off. But when I turn on the back, I get the blue screen of death that checks my record of inconsistencies. It is very annoying and disturbing because it means probably that my hard drives should be cracking up.

  After doing the search several times on the issue, I know it's my hard drives fault for sure. I have two hard drives; They both give me error messages. They must be on their way, after all I bought this 2nd hand computer laptop and they made noises strange "at delay." Recently, I noticed once they made a "beep" "beep". Never heard before so it cannot be good.

  In any case, I think that I need new hard drives. Can someone recommend me one or two who are used to give me these error messages (and are relatively cheap at least 30 GB)? Thank you

  P.S when I opened the PC health since the Toshiba Management Console it says '' drive S.M.A.R.T (disk 0) may fail soon. '' Ouch.

  Hello

  Each HARD disk with adequate material specifications may work on the Tecra 9100.
  The HARD drive should support an interface IDE (ATA-5) and should not be larger than 60 GB.
  I'm sure that BIOS Tecra 9100 will support 30 GB, 40 GB and perhaps also the 60 GB.
  But the larger sizes of HARD drive might not be recognized by the BIOS correctly.

  By the way; You can make a call to the Toshiba authorized service provider in your country and could order the compatible HARD drive.
  In this case, you will be sure that the drive is supported and runs without any problem to 100%.

• Dell XPS 502 X errors to hard drive sectors

  Hello I am writing to ask for help, I have a laptop brand Dell XPS 502 X working wonderfully for two years, until about 5 months ago became slow is slow to open windows will pass a chkdsk / F / R and the errors found in the Seagate ST9750420AS sectors hard drive 750 GB capacity. We have a seagate brand MS-DOS program and I wrote zeros in the disk partition and then format given you reinstall Windows 8.1 sp1 64-bit; works well for a month, but he began to slow down you install the dell diagnostic program and found disc errors too. My question is; errors on the hard disk will be the heat from the hard drive, or it is possible that the vibration of speakers when I listen to music or movies. vibrations in the notebook which will produce errors in the areas of hard drive? I need help, make a decision to buy a hard drive or disk solid state drive SSD for my laptop. If the damage resulted from the vibrations unit solid disk should be used, have the disadvantage auque wear cells and edit video, use programs all the time and make heavy use of the hard drive. I would recommend the Pc, with its expertise in this area.
  Except that I would like to know what specification Sata I, II and III; supports my laptop is a Dell xps x 502; having in mind these hard disks:
  (1) thin Seagate 500 GB, 7200 RPM, 32 MB, Sata 6GBs.
  (2) BLACK WESTERN DIGITAL 750 GB 7200 RPM 16 MB SATA 6 GB/s.
  SSD:
  Kingston Ssd 120 GB Sata Hyperx 3 k-3
  Now V300 240 gb Ssd Sata 6 gb / s
  SSD 240 GB Kingston 300v
  Intel Ssd 120 GB
  SSD 250 GB Samsung 840 Evo
  That what he would recommend for my laptop and the compatibility of the use I give to the laptop. Thank you and excuse my ignorance on the subject.

  for later use, google traslator apologize for translations.

  Free fall sensor driver can be installed and works with a replacement drive. It is obviously not necessary for one SSD.

• Satellite Pro A60 and a new HARD drive

  I installed a new hard drive on my notebook and I can't launch Win XP pro or Win 98.
  During the sequence of booting with XP, I get the error message:
  Initializing device NDIS:
  WINDOWS PROTECTION ERROR.
  I checked my bios settings, there are only two
  [HARD DISK MODE = Enhanced IDE (normal) and (standard), I have tried both to no success.]
  I can run 98 in safe mode, but when I use this mode I can access my DVD - ROM is more.

  Hello

  Please check this link http://support.intel.com/support/motherboards/desktop/sb/cs-008712.htm.
  In my opinion, you should try to preinstall the device using recovery DVDs.

  Good bye

• Equium A60-692 - no power and removing the HARD drive

  The power has gone on my A60-692, the adapter is ok but there is just no no LED on the laptop. I had to get replaced a few years ago so maybe it is related to that of the power connector.

  I took to a local repair place, he said, it would cost more to fix this, so I should really find it useful laptop only think about recover my data.

  Is it really so hard to fix these things?
  How hard is it to make the hard drive out, & how would then access down my data?

  Thank you
  Dave

  Hello

  > I took to a local repair place, he said, it would cost more to fix this, so I should really find it useful laptop only think about recover my data.
  I agree with the authorized service provider. My personal opinion is that it s a malfunction of the motherboard and it is a very expensive part. Besides, Equium A60 is pretty old model so it would be better buy you a new laptop and recover your data.

  > How difficult is it to make the hard drive out, & how would then access down my data?
  It of not difficult, but I m really wondering why you need access to these data. You don t have a backup? In my opinion the backup is the most important thing you need to do on a computer.
  Anyway, normally on the underside of your laptop there is a HARD drive cover which is guaranteed by one or two screws. You must remove this cover and then you can see the HARD drive and you're able to remove it.
  Also buy an external HARD drive enclosure where you can install the HARD drive. Then you can connect it to another computer to back up your data. ;)