XPS8900 with NVIDIA GTX 745 to Dell U2515H monitor

Hello

just a question:

I want to buy a DELL XPS 8900. I already have a DELL U2515H screen (I never want to Miss ;-).

My real office includes a graphics card with display port: it works very well.

The GEFORCE NVIDIA GTX 745, which is included in the XPS8900 is not a DP.

How to connect the screen to the XPS 8900 to run the display in Native Mode at 2560 x 1600 pix and 60 Hz (WQXGA)?

Thanx for each tip!

Jörg

Hey there, your current monitor has an hdmi connection and the 745 GTX also has hdmi.

Tags: Dell Desktop

Similar Questions

  • XPS 8900, use of Nvidia GTX 745

    Hello

    I bought a Dell XPS 8900 with a GTX 745. Should arrive this week.

    Will this DDR3 4 GB Dell OEM Nvidia GeForce GTX 745 c:

    NVIDIA GeForce GTX DVI out--> in--> #1 U2412M DVI DVI to DVI cable = 1920 x 1200

    NVIDIA GeForce GTX out HDMI--> HDMI / DVI--> #2 U2412M in DVI = 1920 x 1200

    Above config works with my old PC (see below).

    Can I add a #3 Monitor VGA input and 3 monitors at the same time?

    ---------------------------------------------------------------------------------------------------------------------

    Old (and always reliable!) XPS 8100 with AMD 5450 can support this with my 2 x U2412M monitors:

    Reference Dell AMD 5450 out DVI--> in--> #1 U2412M DVI DVI to DVI cable = 1920 x 1200

    Reference Dell AMD 5450 out HDMI--> HDMI / DVI--> #2 U2412M in DVI = 1920 x 1200

    Confirmed to work with my new 8900 XPS:

    NVIDIA GeForce GTX 745 out DVI--> in--> #1 U2412M DVI DVI to DVI cable = 1920 x 1200

    NVIDIA GeForce GTX 745 output HDMI--> HDMI Cable DVI--> #2 U2412M in DVI = 1920 x 1200

    NVIDIA GeForce GTX 745 output VGA--> in--> #3 U2211H VGA VGA cable VGA = 1920 x 1080

    Note:

    I did a fresh install of Windows 10 Pro on an SSD that I added and to use.

    Assist support gives me an error "Primary Surface Test cannot operate" with more than one monitor. single monitor flickers during this test.

    It passes all THE tests brilliantly using one monitor with a DVI connection.

    I did more testing on different monitors.

    I guess it's a problem with Support Assist; I can provide more details on request.

    Happy with the purchase!

    :)

  • can I replace quadro4000m with nvidia gtx 690 z1 nvidia graphics card hp all-in-one

    All Z1 in a HP workstation

    can I replace nvidia graphics card quadro4000m with nvidia gtx hp 690 z1 all-in-one for better graphics performance?

    Hello

    The 690 NVIDIA is only a 'chimera' at the moment.  We'll see what happens after the rumor launched as of April 28.

    Open the Z1 HP if you have a look at available power connectors and also note the size of the power supply.  The Z800 with 875 watt POWER supply can operate according to the available power connectors.

  • Dell XPS 9100 compatible with Nvidia GTX 980/970?

    All the world either of these new cards video 980/970 series installed in a dell xps 9100? Or whether they will work with the 9100, in particular motherboard/bios original card?

    I plan to upgrade my studio xps Dell 9100 (2010 I7 930 12 GB of ram, motherboard Dell 05DN3X Intel X 58 Intel ICH10R) with a new video card in replacement of the Radeon HD 5870. My choice of card is the new Nvidia GTX 970.

    The GTX 970 and 980 GTX are based on the new Maxwell Nvidia cards with high specifications on page and good price. While they are not suitable for the power of the XPS 9100 (two GTX cards consume less energy than the 5870), I don't know if my original xps 9100 motherboard (with a bios updated from July 2014 on the site of dell driver) is compatible with the gtx 970. BIOS office 8700 recent Dell was not compatible/created a problem of black screen, and Dell has released a updated Bios updated for the 8700 in December 2014 that apparently works fine now with the 980/970 series. I wouldn't drop the $350 on a video card that didn't work with my 9100

    I use the Dell 9100 for video editing (Sony Vegas Pro 13, Hitfilm 3, NewBlue and other programs based GL/CL) works more 3d animation with iclone (who prefer Nvidia). I could probably get another year or two out of it with a newer video card... otherwise I'll put all useful to a construction of the self.

    I'd appreciate any comments on it. Maybe Chris from Dell of this forum would know that he shares the fix for dell bios enabled the 980 work with 8700.  Thanks to Chris if he answers or if he can answer my question gtx 970 for me and other 9100 owners.

    Just this moment installed a MSI gtx 970 in my 3 1/2 years, xps 9100. Original motherboard. The only thing I've really updated over the years is the memory.

    Processor Intel Core i7-960 @3. 2 GHz (8 MB L2 Cache)
    16 GB OF RAM, DDR3 PC3-10600, DDR3 PC3-12800
    NVIDIA GeForce (r) GTX 970 4 GB
    Dell XPS 9100 desktop
    Windows 7 Home Premium (64-bit) SP1

    525 Watt POWER supply was more than enough. You must use both the point 6 and point 8 plugs not one or the other. Biggest problem was to find a second source of power. The 6 + 2 plug, but don't think that the other was there. He was and is buried in the middle of a wire harness. A sheet of plain to 6 points. Just enough.

    It works like a charm. Not at all of the start-up problems

  • HP Z420 with Nvidia Gtx Titan

    Hello

    I considered buying a Z420, and I intend to use maps of Titan since I rendered by GPU, as well as the CAD uses and in real time. (Autocad, Revit and 3d Max). I've used a Quadro 4000 card, but it is certainly not useful for real time rendering.

    So in my case, a map of Titan is more advantageous. But today, I realized this of Nvidia Geforce series only is not supported for HP workstations. So, what should I do? Is there a way to use Titan with Z420? Should I look for another computer?

    Thanks in advance...

    GTX Titan uses the 250W peak power and NVidia said a 600W PSU enough Z420 has a 600W PSU. So unless you have something else really your Z420 (such as five 15 K disks without spin shifted upwards) - the lust for power, you should be fine.

    Personally, I have not used a Titan in a Z420 (GTX - 680 was the largest map that I installed) - once again - it looks good on paper.

    HP will not support it in terms of pilots or guarantee-, but it will take care the rest of the system.

    All that being said, a Z820 is a bit better suited to the Titan GTX...

  • Lightroom 6.0 OpenGL acceleration does not not with NVIDIA GTX 750Ti

    Hello

    Plenty of pleasant anticipation on LR6 new support (OpenGL) graphics card I just bought an upgrade.

    However, in 'Preferences', I see the message "graphics processor acceleration ahs been disabled due to errors".

    Ouch!

    Can I do something?

    Configuration:

    • Adobe LR 6.0
    • Professional Windows 7/64
    • NVIDIA Geforce GTX 750 Ti with the latest drivers (who claims to support OpenGL up to 4.4)
    • Intel Xeon W360 / 20 GB of RAM

    Best regards

    George

    Linz, Austria

    Saljur, I found an answer of my own.

    1. open your nVidia Control Panel.

    2. go in 3D settings

    3. in the program settings, go to Lightroom.exe

    4. apply and exit.

    5. open new Lightroom

    6 MAGIC

  • HP Elitebook 8440p Energy Star: HP Elitebook 8440p Energy Star with NVIDIA NVS 3100 M press 3 monitors

    Performs:

    Model: HP Elitebook 8440p Energy Star

    Video: NVIDIA NVS 3100M

    CPU: Intel (r) Core i5 CPU M 540 @ 2.53 GHz

    RAM: 4 GB

    Running: Windows 7 SP1 64-bit

    Support 3 monitors?

    I have a docking station with 2 monitors connected and I want to get my laptop screen works with the 2 monitors.

    Whenever I try to extend the screen to more than one of my other screens.

    Thank you

    Jesse

    No triple monitor supports, sorry to say. You can have 2 of the 3, but not all 3 at the same time. The only way to do it is to get something like a USB to HDMI adapter to add the third screen.

    http://www.Amazon.com/cable-matters%C2%AE-SuperSpeed-adapter-2560x1440/DP/B00BPEV1XK/ref=sr_1_2?ie=UTF8&QID=1432133221&SR=8-2&keywords=USB+to+HDMI

    If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

  • East-nvidia gtx 860 m compatible with illustrator CC?

    I'm going to buy laptop with nvidia gtx 860 m and I need to know
    Is compatible with the CC-860 m-Nvidia GTX Illustrator?

    var_px,

    NVIDIA GTX 860 m is not among the compatible graphics cards for the moment. Please see the link below for the full set of compatible graphics cards:

    System requirements | Adobe Illustrator

    Thank you

    OM

  • How many monitors can NVIDIA® GeForce® GTX 745 4 GB DDR3 support?

    Can anyone provide me with information on montors how this video card can support at the same time?

    NVIDIA® GeForce® GTX 745 4 GB of DDR3 memory

    Three, but it depends on what you are doing.

    If you think of the game with three monitors you dislike the refresh rate

    http://www.GeForce.com/hardware/desktop-GPUs/GeForce-GTX-745-OEM/specifications

    be sure to read the notes and the fine print.

  • Dell drivers for NVIDIA GTX 560

    I have an Inspiron 580.  I installed an EVGA NVIDIA GTX 560 2 GB 02 G-P3-1469, Windows device ID 1201.  It is correctly installed in the PCI 16 x slot.  I installed a 750 Watt PSU. (2) power of the power supply cords are properly connected to the video card. The video output line is properly connected to the monitor (double entry). The fan on the card.

    I made many attempts to install drivers for this card by using the method of 'DRIVE '.  The best result I got so far is "driver does not support this version of windows. I have Windows 7 64 bit.  I used the drivers for Windows 7 64 bit.

    Of what I discovered that somewhere deep inside the installation of Dell's Windows, the operating system will reject drivers not defined to the system.

    I was not able to find "Approved Dell" drivers NVIDIA GTX 560.

    If these drivers exist, please let me know.

    If there is a registry or WMI configuration problem that will allow me to install the current NVIDIA drivers, let me know.

    If there is an upgrade of the BIOS that is specific to the installation of an auxiliary graphics card, let me know.

    I spent 11 months chasing this problem. I am incredibly lucky that I didn't not turn my computer into a brick. I figured this out little about directly or indirectly by a trail of crumbs independent on the internet. In the process. The solution is.  By this, I mean that there was a communication failure. On the Dell Inspiron 580, and I'm sure that this applies to the other Dell with FRIEND bios, there is no access to the graphics card setting. Make sure that you have properly installed the card in the PCI - X slot, you have a 650 Watt or improving the power of food and hung properly power cables that the card may need.

    All that being said, it's what works:

    1. click on the button 'start '.

    2. Select the "Computer" entry with the right button of the mouse to select 'manage '.

    3. Select "Device Manager" in the list "system tools."

    4 expand the list 'graphics cards.

    5. right click on the name of the adapter

    6. Select 'disable' and ignore the complaints of the OS.

    7. shut down the computer.

    8. INCREDIBLY, RIDICULOUSLY IMPORTANT: Disconnect the cable from the integrated video connector. If you do not do this, the onboard video will automagically to reinstall its drivers when the system boots and you will lose your mind.

    8. disconnect the power cord from the computer and wait 30 seconds.

    9. start the computer. The first thing you see is NVIDIA card manufacturer ID.

    10. DO NOT PANIC! You will see a pop-up dialog box displaying messages on the currently installed drivers. It may take up to 10 minutes for the system to install the PCI, PCI Bridge, and other factors associated with the new graphics card.

    12 download latest and largest installation of NVIDIA nvidia.com and run it.

    13 make a donation of us $ 10 to the Salvation Army or its equivalent in your country.

    This is a solution that Dell should be provided and made available to its customers rather than rely on a client to perform research, analysis of hardware, configuration of the software and documentation FREE techincial.

  • HP Compaq 8200 Elite SFF: MSI 770 2 GB graphics Nvidia GTX compatible with HP Compaq 8200 Elite SFF?

    Hello

    I recently bought a HP Compaq 8200 Elite SFF and want to update the graphics card. My friend has a MSI Nvidia GTX 770 2 GB graphics card in sales and I was wondering if it would be compatible with my PC. I said I'll need to upgrade to the power. Will it be possible? If the graphics card of my friend is not compatible with my PC, what is the best graphics card (ideally a similar to the MSI Nvidia GTX 770 specs/price range) which will be compatible?

    Any advice would be much appreciated.

    Thank you

    John, welcome to the forum.

    I think that you will get more answers to your questions if you start a thread here.  The members who know your best computer.

    Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

  • Dell Precision 7710 with NVIDIA Quadro M5000M problems with 3D WPF content

    I have a

    Dell Precision 7710

    6920HQ-i7 CPU @ 2.9 GHz

    32 GB of Ram

    Windows 7 Pro Sp1

    NVIDIA Quadro M5000M 369.49 driver version

    I bought an upgrade for my

    M6700 Precision

    Our company has developed and uses software that uses WPF to render 3D content in a XBAP in Internet Explorer.  When I try to use it on the 7710, 3D content flickers when it is redrawn, makes it almost unusable.  The stats we can get our application, we can see that time of update for refreshment / current is about 45ms, while on most of the other PC, even those using the integrated Intel graphics card, typically 12ms.

    We used this software on a large number of PC without feeling anything as bad, which is obviously quite disappointing because the laptop should be able to view we want to hassle.

    As far as I can tell all our drivers for everything on this laptop are up-to-date.

    We tried using the NVIDIA Control Panel to force the laptop to use the High Performance Nvidia Quadro rather than the graphics card integrated card and it seems to be made while we were able to do, it shows the icon in the taskbar notification and which showed that IE was using the Nvidia.

    I tried tweaking pretty much all other settings I can think / see.

    I tried to use the Dell Precision optimizer to select different profiles with no luck.  The Dell Precision optimizer seems not really demonstrate the use of the GPU processor or any other stats to see with the GPU, which seems odd to me.

    I ran Diagnostics on the laptop available on the Dell support site.

    I searched the net and found a few examples of problems with Nvidia and WPF cards, but none of these things that we found seems to apply to our application.  We have desktop computers at the office where he works well with other Nvidia cards / best of all.

    In addition, the fan on the 7710 will quite difficult sometimes - hard that I expect.  I tweaked the power settings to move less, but it always seems to run the fan more that I think it should / would appear on my M6700 - or maybe it's just a fan of stronger.

    So I wonder:

    If anyone out there has experienced something similar?  If so, any suggestions on how to fix or things to try would be greatly appreciated.

    Thank you

    We solved the problem by making changes in our application software.  We still don't seem to be able to reach the same FPS as for the other GPU, which should be similar, but we're working on that also.  Perhaps because we are trying to run the application at 4K.  If anyone has a similar laptop and can provide details on the 3D graphics performance using any software comparative analysis, it would be great if they could share for comparison.

  • Dell XPS L702X with Nvidia 3D Vision - HDMI problems

    Hello

    I recently bought some Dell XPS L702X 64 with Nvidia 3D Vision (NVIDIA GeForce GT 555 M).

    1. it comes with Windows 7 Home Premium 64 bit and I've upgraded to Windows 7 64 bit Utltimate.
    2. I downloaded the Version of Windows 7 and I've changed the language to English, French.

    Everything works like magic with the exception of the exit HDMI from the PC to the TV (Sharp Aquos HD Ready - 2005 model).

    The TV recognizes the signal between PC and it displays 768 WXGA and immediately the computer laptop & TV Pale white display screens.
    To return the display on the laptop, I need to get out of the PC HDMI cable.
    HDMI works fine on my TV while he receives an input signal of the «TV decoder»

    Waiting for your valuable contributions.

    Kind regards
    Clement

    Please update your NVIDIA graphics driver, the latest version for GT555M is 340.52, hope this will solve your problem

  • Premiere Pro supports CUDA with NVIDIA GeForce GTX 980 Ti?

    Premiere Pro supports CUDA with NVIDIA GeForce GTX 980 Ti?

    Yes

  • The Nvidia GTX 970 works with the gpu acceleration in first pro / after effects.

    The Nvidia GTX 970 works with the gpu acceleration in first pro / after effects.

    I want to know as I suppose it would be, but it is not in the configuration required for the cuda acceleration.

    Yes, he does. I have the 980 and it works very well also.

Maybe you are looking for